WORK AUTHORIZATION A STATEMENT OF WORK FOR (Sanitized)

Document Type: 
Collection: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP68B00307R000100020004-8
Release Decision: 
RIPPUB
Original Classification: 
K
Document Page Count: 
9
Document Creation Date: 
December 12, 2016
Document Release Date: 
January 31, 2002
Sequence Number: 
4
Case Number: 
Publication Date: 
October 7, 1965
Content Type: 
REQ
File: 
AttachmentSize
PDF icon CIA-RDP68B00307R000100020004-8.pdf166.99 KB
Body: 
Approved For Release b0307R06(1 200('4'!8' %? 'GIB 25X1A ILLEGIB Approved For Release 2012/06/12 : CIA-RDP68BOO307Rp00100020004-8 Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Statement of Work for 25X1 D 25X1 D The feasibility demonstration should utilize existing off-the-shelf hardware and Government facilities wherever practical. The efforts associated with this-t-a 3fQrdex are as fol- lows: A. Determine preliminary functional requirements of the Luitable for use in the demonstration system testing B. Determine preliminary system parameters for a feasibility demonstration C. Perform preliminary laboratory tests to determine the suitability of off-the-shelf o satisfy 25X1D the functional requirements determined as a result of Items A and B above. D. Determine equipment and facilities available for utilization in the accomplishment of the proposed feasibility demonstration Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Approved For Release 2002/06/12 : CIA-ROP68B00307R000100020004-8 Task Order A (continued) E. Determine preliminary interface and operational re- quirements for equipment to be used in the demonstration test F. Formulate a schedule for accomplishment of the pro- posed feasibility demonstration. III. REPORTS Prepare a final report stating the results of the efforts accomplished in association with the above scope of effort. Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 '# 4wrl~ B ti 4 The purpose of this is to determine: II. SCOPE OF EFFORT A. OXCART Aircraft This s-eex is to determine the interface require- ments This data shall include the following: 1. Logic level of digital data 2. Timing parameters 3. Wave shapes 4. Data characteristics 5. Voltage and impedance levels 6. Interconnection cabling requirements. 25X1 D 25X1 D Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Task Order B (continued) B. IDEALIST Aircraft f r This ta-e --ord-e- is to determine the interface reauire- include the following: 1. Lofic level of digital data 2. Timing parameters 3. Wave shapes 4. Data characteristics 5. Voltage and impedance levels 6. Interconnection cabling requirements III. REPORTS Prepare a final report stating the results of the efforts accomplished in association with the above scope of effort. 25X1 D Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Statement of Work to Determine the Feasibility of I. PURPOSE This t^t- is to determine A. The feasibility and practicality of co-locating OXCART and IDEALIST aircraft I I and B. The availability and suitability of site equipments to satisfy the stated requirements. II. SCOPE OF EFFORT This task order provides for the study and formulation of preliminary equipment listings for support A. Survey of existing and/or planned sites to determine: 1. Primary power facilities 2. Floor space and loading 3. Support utilities 4. Terrain topography 5. Antenna Farm layout 6. Detailed equipment inventory 7. Operational limitations. III. REPORTS Prepare a final report, including recommendations for the equipment configuration of the various sites. These 25X1 D 25X1 D 25X1 D 25X1 D Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Task Order C (continued) recommendations shall take into consideration the avail- ability and limitations of the existing equipment and site limitations. Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Approved For Release 2002/06/12 : CIA-FDP68B00307R000100020004-8 Statement of Work to Determine Form Factors I. PURPOSE This to-sk--orde-r is to make a preliminary determination of the form factors necessary for the installation II. SCOPE OF EFFORT This task order shall define the following: A. Available areas that may be used B. Mounting Structure requirements C. Interconnection cabling restrictions D. Possible sources of electrical interference E. Air flow quantity and temperature in selected areas F. Equipment removal and replacement factors. III. REPORTS Prepare a final report stating the results of the efforts accomplished in association with the above scope of effort. 25X1 D 25X1 D 25X1 D 25X1 D Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8 Approved For Release 2002/06/12 : CIA-I'DP68B00307R000100020004-8 TASK ORDER-1 Statement of work to Determine Form Factors for IDEALIST Aircraft Area Installation of I. PURPOSE This task order is to make a preliminary determination of the form factors necessary for the installation II. SCOPE OF EFFORT This task order shall define the following: A. Available areas that may be used for installation of B. Mounting Structure requirements C. Interconnection cabling restrictions D. Possible sources of electrical interference E. Air flow quantity and temperature in selected areas F. Equipment removal and replacement factors. III. REPORTS Prepare a final report stating the results of the efforts accomplished in association with the above scope of effort. 25X1 D Approved For Release 2002/06/12 : CIA-RDP68B00307R000100020004-8