TERMINATION OF P-130, INFORMATION SAMPLER, TELEPHONE, ELECTRONIC

Document Type: 
Collection: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP78-03153A001800020001-2
Release Decision: 
RIPPUB
Original Classification: 
S
Document Page Count: 
2
Document Creation Date: 
December 23, 2016
Document Release Date: 
May 20, 2014
Sequence Number: 
1
Case Number: 
Publication Date: 
December 20, 1955
Content Type: 
MEMO
File: 
AttachmentSize
PDF icon CIA-RDP78-03153A001800020001-2.pdf107.49 KB
Body: 
Declassified in Part - Sanitized Copy Approved for Release 2014/05/20: CIA-RDP78-03153A001800020001-2 / 20 December 1955 APD PANEL Termination of P-130_ Inforiation coupler, Telephone,. Electronic 1. in their brief fn report, stated that the Informat on amp er could be used to put four messages on a single telephone line, or channel. Bandwidth required was 200 cps to 10KC. The limitations were that on long telephone lines, the top channel would be lost or if the line ased tbroup a switchboare, one or acre channels would be lost, so considered it possible that the Information Sampler coth1 be used with radio liven or IR signaling devices to increase their capacity. a. produced. a breadboard of the above device,: consisting of a receiver unit and a transmiiter unit. Field tests of this breadboard, as far as the writer has been able to ascertain, were unsuccessful. interest in the device apparently began to vane, for it appears that no attempt was made to inprove the device by redesign or by modification of the present circuit. In the ensuing time interval, the transmitter unit of this bread- board has disappeared and cannot be located in AFD or at 3. The undersigned has attempted to find out if reqeirenents for such a device still exist. ASD was approached on the problem and indicated no interest in such a device. was the originator of the requirement for the Information Sampler. This desk was contacted as to whether the requirement still exists, and the man who presently heads this area desk was unable to find In his records the original request, apparently put in ttv hia predecessor. He thought such a device would be helpful' but that he knew of DO preseing requirement by this for such eqpipment, 4. In view of this fact, plus the loss of the transmitter part of the breadboard which prevents further testing and tha apparent unsuccessful field tests, which to the undersigned mikes it unwise to have the transmitter unit rebuilt, it is recommended that the project be terminated. The lack of interest for continuation by the designer at is another factor to be considered. 50X1 50X1 50X1 50X1 50X1 50X1 50X1 50X1 50X1 50X1 Declassified in Part - Sanitized Copy Approved for Release 2014/05/20: CIA-RDP78-03153A001800020001-2 Declassified in Part- Sanitized Copy Approved forRelease2014/05/20 : CIA-RDP78-03153A001800020001-2 r r .2. 5. If the panel deems it unwise to terminate the development of such equiplent at this time, it is recommended that this project be left dormant for the present or be transferred to another contractor with more electronic capabilities than possesses. 'MS/MD Distribution 1 - APD Panel 1 P-130 1-? 1 - Chrono 50X1 50X1 50X1 50X1 Declassified in Part- Sanitized Copy Approved for Release 2014/05/20: CIA-RDP78-03153A001800020001-2