CABLE TO RUCSC/SAC OFFUTT AFB OMAHA NEB FROM NPIC WASHDC

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04558A000900030135-1
• Release Decision: RIFPUB
• Original Classification: S
• Document Page Count: 2
• Document Creation Date: December 28, 2016
• Sequence Number: 135
• Content Type: CABLE

Approved For Release 2008/02/06: CIA-RDP78BO4558A000900030135-1
OUT5545I
P 1221182 55 NPR 12 21 3~ 13 APR 1965
FM NPIC WASHDC
a %P
RUCVAA/4080 STRAT WG OL 19 BARKSDAL AFB LA
RUCVAA/2D RTS BARKSDALE AFB LA
RUEKDA/DIA WASHDC
RUECYH/NAVRECONTECHSUPPCEN SUITLAND MD
RUEPIA/CIA WASHDC
RUWBKN/15TH AF MARCH AFB RIVERSIDE CALIF
RUWGAA/2AF BARKSDALE AFB LA
BT
S E C R E T CITE NPIC 4254.
15TH AF (FOR DI), SAC (FOR DIM/GOLDEN TREE/DOCR, DM 4) 2D AF (FOR
1. CAMERA B 122 WAS USED IN MISSION 3999 FLOWN ON 9 APRIL 1965
PROCESSING WAS ACCOMPLISHED BY BARKSDALE.
2. ORIGINAL NEGATIVE:
A. THE EXPOSURE WAS ADEQUATE AND THE RESOLUTION IS GOOD.
B. 9R SIDE: ROWS OF MINUS DENSITY DOTS OCCUR SPACED 1.55"
APART AND LOCATED 4.7" AND 5.5" FROM THE INBOARD EDGE IN THE FIRST
57 FRAMES, AND 4.2" AND 7.9" FROM THE SAME EDGE THROUGHOUT THE
MISSION. EVIDENCE OF MINOR PRESSURE ROLLER STATIC ALONG THE INBOARD
EDGE EXISTS THROUGHOUT THE MISSION. A MANUFACTURING SPLICE OCCURRED
IN FRAME 1513. A HEAT SPLICE IS PRESENT IN FRAME 1209. FINE
EMULSION SCRATCHES ARE LOCATED PARALLEL TO THE EDGES OF THE FILM
THROUGHOUT THE FIRST TWO PARTS OF THE MISSION.
Co 9LSIDE: NUMEROUS MINUS DENSITY DOTS ARE PRESENT ON FRAMES
001 TO 005. ROWS OF MINUS DENSITY DOTS SPACED 1.55" APART AND
POSITIONED 1.3", 1.5", 1.8", AND 3.5" FROM THE INBOARD EDGE OF
THE FILM ARE IN EVIDENCE IN THE FIRST 75 FRAMES. FAINT ROW OF MINUS
DENSITY DOTS SPACED 2.3" APART LOCATED 4.6" FROM THE INBOARD EDGE
S" E CR'
Approved For Release 2008/02/06: CIA-RDP78BO4558A000900030135-1
 Approved For Release 2008/02/06: CIA-RDP78BO4558A000900030135-1
0
ARE PRESENT THROUGHOUT THE MISSION. 'SHORT, DIAGONAL, MINUS DENSITY
STREAKS THAT RESEMBLE STATIC MARKS ARE SPACED ABOUT 3.0" APART
AND POSITIONED ABOUT 1.2" FROM THE OUTBOARD EDGE OF THE FILM FROM
FRAME 020 TO 050. EMULSION DIGS ARE PRESENT ON THE LAST FRAME OF
MOST PARTS. A MANUFACTURING SPLICE IS LOCATED IN FRAME 1892 WITH
ASSOCIATED STATIC MARKS ON 1894. BECAUSE THERE WAS NO TAPE SECURING
THE LEADER ON THE HEAD OF EACH PART, EXTREME CARE HAD TO BE EXERCISED
TO PREVENT DAMAGE TO THE FILM WHEN EXTRACTING THE REEL OF FILM
FROM THE CAN.
D. BOTH SIDES: EVIDENCE OF EDGE STATIC IS PRESENT ALONG
BOTH SIDES OF THE FILM' THROUGHOUT THE MISSION. THE TITLED FRAMES
ARE NUMBERED CONSECUTIVELY FROM 0000 TO 2344 ON THE 9L SIDE AND
THERE IS ONE ADDITIONAL FRAME ON THE 9R SIDE.
E. THERE WERE NO MAJOR CAMERA OR PROCESSING MALFUNCTIONS
DURING THE MISSION.
3.
GP-1
A.
B.
C.
POSITIVE:
THE PI SUITABILITY IS GOOD.
THE PRINTING AND'PROCESSING WAS GOOD.
CLOUDS COVERAGE IS LESS THAN 10 PERCENT OF THE MISSION.
S E C R E T
--END OF MESSAGE--
Approved For Release 2008/02/06: CIA-RDP78BO4558A000900030135-1
1