INSTALLATION ENGINEERING
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP78B04747A000300010022-4
Release Decision:
RIPPUB
Original Classification:
K
Document Page Count:
2
Document Creation Date:
December 28, 2016
Document Release Date:
October 5, 2001
Sequence Number:
22
Case Number:
Content Type:
FORM
File:
Attachment | Size |
---|---|
![]() | 82.76 KB |
Body:
Approved For Relea2001/11/19 : CIA-RDP78B04747A000010022-4
INSTALLATION ENGINEERING
I. INSTRUMENT / 't C4
A. Name 14,tace-sse r
B. Manufacturer
C. Contract Numb_
7e
II. PHYSICAL FEATURES
A. Number of Component Parts
B. Dimensions of the Largest Component Part:
Length Ft. In. Height Ft.
Width Ft. In.
C. Weight of Largest Component Part
D. Total Weight of Instrument
E. Overall Dimensions Assembled:
Length 8 t. 0 In. Height 5 Ft. 7 In.
Width Ft. C In. .14 F. Type of Base of Mount:
Flat Three Point Suspension Four Point Suspension X
G. Does Instrument have built-in mobility? No
H. Is the instrument particularly sensitive to vibration? Yes
I. Are any special or unusual tools or fixtures necessary or advisable
for the installation or maintenance of this equipment? No
III. UTILITIES
A. Electrical: AC DC.
Voltage 220 Volts + Volts
Current 40 Amps
Frequency 60 cps
Nr. of phases Single
Nr. of wires 3 + ground
Power required by
equipment Watts Watts
Type of outlet required: Two Prong , Three Prong plus grounsfell
Twist Lock , Permanent Installation
Should the equipment be shielded, either from external electro-
magnetic signals, or to prevent interference with other equipment?
Declass Review by NIMA/DOD
Approved For Release 2001/11/19 : CIA-RDP78BO4747A000300010022-4
Filtered 78 OF + 2 OF Particle size and count per
unit volume. 10 Microns
Type of pipe required:
Galvanized
Stainless Steel
Is floor drain required?
Diameter of drain 4"
Plastic drain
Approved For Rel 2001/11/19: CIA-RDP78B04747A00%00010022-4
B. Air Conditioning:
Room temperature 720 Humidity Normal
Output of Instrument ? BTU/Hr-
If air must be filtered, what is maximum permissible particle size
in microns? Normal Lab Conditions What particle count?
particles per cubic foot.
Direct connection to instrument? Yes No
If yes to above, what is the desired air temperature to instrument?
Should discharged air be ducted separately? yes
Is discharged air noxious? No toxic'? No
Connector size to instrument
Tempered OF +
Deionized OF +
Copper X
Tap OF + OF
Water pressure Normal
Type of water desired:
C. Plumbing:
Is water required for the instrument? Yes X No
D. Compressed Air:
Diameter of connectors N.A.
PSI
CFM
E. Vacuum:
Is vacuum required?
Vacuum required No
meters)of Hq
Displacement
Plastic
Yes X No
Galvanized drain
Glass drain
Type of connectors
Water free?
Oil free?
inches milli-
In the event additional space is required for environmental conditions
or utilities not mentioned above, use the reverse side of this form.
20" work space required above instrument
36" work space required on each side & end.
2
Approved For Release 2001/11/19 : CIA-RDP78BO4747A000300010022-4