NEGOTIATED CONTRACT
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP78B04747A000700050009-1
Release Decision:
RIPPUB
Original Classification:
C
Document Page Count:
7
Document Creation Date:
December 28, 2016
Document Release Date:
March 28, 2002
Sequence Number:
9
Case Number:
Publication Date:
December 16, 1964
Content Type:
FORM
File:
Attachment | Size |
---|---|
![]() | 427.74 KB |
Body:
tetil?
? Lit aiLi Neil-
-
Jr b
Arrfferretinfierriteltas
NEGOTIATED CONTRACT
..- ,-
? T 'ASK ORDER ;Na.-1
814.7
_______
NAME
NAME
CONTRACT FOH ., l'
Contractor shall design and fabricate one (1) Field Sine
Vame Test Device ?
MAIL INVOICES TO
? 1 6 DEC i94
Issuing Office
APPROPRIATION AND OTHER ADMINISTRATIVE DATA
25X1A
25X1A
Declass Review by NIMA/DOD
This negotiated contract is entered into pursuant to Statutory Authority and any required determination and
findings have been made. .
THIS CONTRACT is entered into as of '5 Dece 1:?er 19&, by and between the United
-tes of Ameri a hereinafter railed HI,. Gniternmpnt
,
epresented by the Contracting Officer executing this
_
eNentract and
(i) a corporation organized and existing under the laws of the State of
(ii) a partnership consisting of
(iii) an individual trading as
hereinafter called the Contractor. The parties hereto agree that the Contractor shall furnish and deliver all
the -supplies and perform all the services set forth in the attached Schedule, for the consideration stated
therein.
25X1i
25X1
-05RM 8 1408
NOTICE
This material contains information affecting the National Defense of the United
States within the meaning of the Espionage Laws, Title 18, U.S.C. Secs. 793 and
794, the transmission or revelation of which in any manner to an unauthorized
person is prohibited by law.
Approved For Release-20Q2/0667N.VA-RDIM31104747A000700050009-1
(When Filled In)
( 1 2 )
(SCHEDULE)
1 OF 4 PAGES
CONTRACT/TASK ORDER NO.
25X1A
SCOPE OF WORK:
The Contractor shall d.esLi and fabricate one (1) prototype Field
Sine Wave Test Device in accordance with the Contractor's proposal
entitled "Testing Proposal for Sine Wave Testing Equipment", dated
March 27, 196k, which is incorporated herein by reference and made a
part of this Contract.
PERIOD OF PERFORMANCE:
The period of performance under this Contract shall be 15 December
1964 to 15 September 1965.
DELIVERABLE irEMS:
1 One (1) prototype Field Sine WEIN'e Test Device.
2. Monthly narrative reports (five copies) to include:
a. Current status of work.
. Problem areas enco ntered.
c. Projected work for next monthly period.
d. Status of' fund expenditures to end of
monthly period
Documentation of any verbal committments
and/or agreements with the Technical
Reprewentative of the Contracting Officer
during the reporting period.
DELIVERY:
In the event any item under this Contract is personally delivered
to the Technical Representative of the Contracting Officer, a signed
receipt, in duplicate, 'crust be obtained from said representative and
one copy attached to any invoice submitted for reimbursement for such
item(s). Failure to do so 1011 result in sus n o of paymentwithoutp-m46tn-
attiLuouv
11,444,a)
CONS
NAME OF CONTRACTOR
FORM 1412a
3-58
25X1A
NOTICE
This material contains information affecting the National Defense of the United
States within the meaning of the Espionage Laws, Title 18, U.S.C. Secs. 793 and
794, the transmission or revelation of which in any manner to an unauthorized
person is prohibited by law.
GROOP 1
EXCLUDED FROM AUTOMATIC DOWNGRADING
Approved For Redgt?tilip_Op.21?,y_71/,91/1:111:t)131:304747XOOMD050 09-1
(12-41)
APProvelfrarRetbsee-200210F 4 PAGES
(SCHEDULE) CONTRArT/TAck OPI1FR MA
25X1A
25X1
25X1A
CONTRACT COST:
CONTRACT .tk;g:
The fee for performance of this Contract shall be determined, by
application of performance and cost incentives as follows:
lo Resolution:
Spatial frequency capability of the instrument
will be evaluated on three levels of performance:
a. 228 limm (minimum acceptable) -
b. 600 1/mm z?nimiFixer:teletable) -
C. 1040 limm mtntmum-acceTtaiale) -
Test targets for requirements in excess of 228 1/
will be provided as Government Furnished Equipment.
Adcurac of Modulation Transfer Function Measurement:
The accuracy and precision of the equipment shall
be demonstrated by the following procedure?
A microscope objective of high quality
or equal) is to be placed in a finite fixture
having an adjustable aperture stop. This stop shall be
circular and shall be adjusted to allow the lens to ,
operate in a diffraction-limited mode. The diffraction
limit shall be a lower frequency than the highest
frequency on the testing target. The fixture shall
also permit longitudinal focal shifts of 0, 1/4, 1/2,
3/4, and 1 wave of defocussing.
The sine-wave testing device shall be used to
measure the transfer function of the lens under these
conditions of focal shift. Measurements shall be made
for at least two different aperture stops. Comparison
Of measured and calculated transfer curves shall fall
within:
ten (10) per cent (Target).
b. five (5) per cent (Incentive Goal).
For achieving Incentive Gcal fee to
NAME OF CONTRACTOR
25X1A
25X A
25 1
FORM 1412a
3-58
NOTICE
? This material contains information affecting the National Defense of the United
States within the meaning of the Espionage Laws, Title 18, U.S.C. Secs. 793 and
794, the transmission or revelation of which in any manner to an unauthorized
person is prohibited by law.
Approved For Release 2002/06/17 : CIA-RDP7
C-0-N-F-I-D-E-N-T-I-A-L
GROUP I
EXCLUDED FROM AUTOMATIC DOWNGRADING
09-1
02-40
" ? I II ? U.
(SCHEDULE)
? "Amalie; I ! 7
OF PAGES
CONTR
CT/TASK ()RI-1FR NO.
COST:
25X1A
The Contract Fee shall be subject to the application of a cost
incentive on an 80*-20 share line on all costs under or over target
cost.
*Government Share
The total Contract Fee shall be determined in accordance with the
attached "ALLOWABLE COST, INCENTIVE FEE AND PAYMENT" clause which is
incorporated herein and made a part of this Contract.
GOVERNMENT FURNISHED EQUIPMEAT
Should the use of a microdensitometer be required for performance
of this Contract the Contractor shall request the written approval
of the Contracting Officer for rental of this equipment. If such
equipment rental is found, by the Technical Representative of the
Contracting Officer, to be not feasible the Government will provide
a microdensitameter of the type required for performance of this
Contract as Government-Furnished Equipment.
Use and accountability for all Gofernment-Furnished Property
shall be in accordance with the provisions of the attached "Government
-
Furnished Property" clause which is incorporated herein and made a
part of this Contract.
PRODUCTION CONTRACT:
The Contractor agrees, as a part of this Contract, that if, as
a result of the satisfactory evaluation of the prototype Field Sine
Wave Test Device to be delivered under this Contract, the Government
desires to award a subsequent Contract for production of a number
of units of this equipment the Contractor will negotiate a fixed-
price-incentive-fee Contract.
,NON-PUBLICITY,?
It is a specific condition of this agreement that the Contractor
shall not use or allow to be used any aspect of this agreement for
publicity or advertisement purposes. The Contractor may request a
waiver of the foregoing but shall not deviate therefrom unless so
authorized in writing by the Contracting Officer.
SECURITY REQUIREMENTS:
The equipment to be delivered hereunder is UNCLASSIFIED.
The association of the sponsor with the equipment being procured
hereunder is classified CONFIDENTIAL. This classified information
NAME OF CONTRACTOR
FORM 1412a
3-58
25X1A
NOTICE
This material contains information affecting the National Defense of the United
States within the meaning of the Espionage Laws, Title 18, U.S.C. Secs. 793 and
794, the transmission or revelation of which in any manner to an unauthorized
person is prohibited by law.
GROUP I
EXCLUDED FROM AUTOMATIC DOWNGRADING l'
li
AND 1866784
Approved For Re6etts.21)0.?/N7 ? 91i-IpE7 BO4i47 ... _0050809-1
112.411
Aso ?
ve or e
(SCHEDULE)
I, I.
. ? c, ..sr&:1 lp !kW j12.246._.?'Ldiki
OF PAGES
CONTRACT/TASK ORDER NO.
25X
shall be divulged only on a need-to-know basis and then only to those
who have been authorized in writing by this Government component
to have access to classified information. Correspondence originated
by the Contractor and/or data to be sumbitted hereunder, the contents
of which contain classified information, or refers ta the name and/or
address of the Contracting Officer shall be stamped by you with the
classification of CONFIDENTIAL.
NAME OF CONTRACTOR
FORM 1412a
3-56
25X
NOTICE
This material contains information affecting the National Defense of the United
States within the meaning of the Espionage Laws, Title 18, U.S.C. Secs. 793 and
794, the transmission or revelation of which in any manner to an unauthorized
person is prohibited by law.
Approved For Release 2002/06/17 : CIA-RDP
C-0-N-F-I-D-E-N-T-I-A-L
GROUP 1
EXCLUDED FROM AUTOMATIC DOWNGRADING
AND AS I.
09-1
02411
Annroved For Reftige 20020313PP7Eidaci-lk6P78B04747A04111700050009-1
(SIGNATURES)
CONTRACT NO.
25X1A
The rights and obligations of the parties to this contract shall be subject to and governed by the Schedule and the
General Provisions. To the extent of any inconsistency between the Schedule or the General Provisions, and any
specifications or other provisions which are made a part of this contract by reference or otherwise, the Schedule and the
General Provisions shall control. To the extent of any inconsistency between the Schedule and the General Provisions,
the Schedule shall control.
CONTRACTOR REPRESENTS (Check appropriate boxes)
a small
500 employees,
Title 13,
business concern is a concern that (i) is not
or (ii) is certified as a small business
Ch. U, Part 103, 21 Fed. Reg. 9709, which
has not, previously been denied a Small
dealer, it also represents that all sup-
in the United States or its Territories or
than a full-time bona fide employee working
has not, paid or agreed to pay to any company
fee, commission, percentage or brokerage
information relating thereto as requested by
the term "bona fide employee," see General
1952, Vol. 17, No. 253-)
(1) (a) That it . is, 11 is not, a small business concern. For this purpose,
dominant in its field of operation and, with its affiliates, employs fewer than
concern by the Small Business Administration. (See Code of Fed. Reg.,
contains the detailed definitions and related procedures,) (b) that it
. has, II.
Business Certificate by the Small Business Administration, and (c) if Contractor
is a regular
or produced
person (other
plies to be furnished thereunder MI will, Ill will not, be manufactured
possessions by a small business manufacturer or producer.
(2) (a) That it III has, III has not, employed or retained any company or
solely for the Contractor) to solicit or secure this contract; and(b) that it
or person (other than a full-time bona fide employee working solely for the
fee, contingent upon or resulting from the award of this contract, and agrees
the Contracting Officer. (Note: For interpretation of the representation,
Services Administration Reg., Title 44, Secs. 150.7 and 150.5(d), Fed. Reg.,
I. has, .
contractor) any
to furnish
including
Dec. 31,
IN WITNESS WHEREOF, the parties hereto have executed this contract as of the day and year first above
written:
THE UNITED STATES OF AMERICA
By
25X1A
Nor WITNESSES (CONTRACTING OFFICER)
(CONT RACT OR)
By.
NOTE.?In case of corporation, witnesses
not required but certificate below must be
completed. Type or print names under all IT IT LE)
signatures.
(ADDRESS)
CERTIFICATE
certify that I am the
Contractor herein;
on behalf of
of said corporation;
its governing body,
,
of the corporation
,
named as
who signed this contract
that
,
the Contractor, was then
that said contract was duly signed for and in behalf of said corporation by authority of
and is within the scope of its corporate powers.
SIGNATURE (Corporate Seal)
NOTICE
This material contains information affecting the National Defense of the United
States within the meaning of the Espionage Laws, Title 18, U.S.C. Secs. 793 and
794, the transmission or revelation of which in any manner to an unauthorized
person is prohibited by law.
Approved For Release 2002/06/17 : CIA-RDP7
usrm 1409 vitmg:sviou.
GROUP I
Eacluded from automatic
00700050009-1
((2-40)
25X1A Approved For Release 2002/06/17 : CIA-RDP78604747A000700050009-1
Approved For Release 2002/06/17 : CIA-RDP78604747A000700050009-1