PROPOSAL FOR VACUUM EASEL FOR (Sanitized) VG-894 ENLARGER.

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP78B04747A000900160026-8
Release Decision: 
RIPPUB
Original Classification: 
K
Document Page Count: 
4
Document Creation Date: 
December 28, 2016
Document Release Date: 
April 2, 2002
Sequence Number: 
26
Case Number: 
Publication Date: 
June 27, 1963
Content Type: 
LETTER
File: 
AttachmentSize
PDF icon CIA-RDP78B04747A000900160026-8.pdf239.39 KB
Body: 
Approved For Re( se 2002/06/17 : CIA-RDP78B04747AO000900160026-8 June 2Tt 1963 25X1A submit the 25X1A *90 Areas ox Of table Doing tCt v rted. A clearing switch will r+ Weer WaIWr suc'tian. The control switches will have subdued lighted push buttons to ind 25X1A 25X1 switching valves will be grouped an a small panel at the front of the easel. The pumps will be equipped with mufflers to eliminate excessive noise, those are to be vacuum cleaner type blurs capable of creating ILA der. valuing AUG vacuum line connectors will be made to the under side of the easel and connected with suitable plastic tubing to the vacuum pumps. Controls for the vacuum, numps andk.selenoid merge r. ger, installed complete with iding paper flat during exposure, aluminum plate, 3/4" thick, ibut on ever the, 42" x 42" top work surface drilled to match the pattern in the aluminum plate. Provisions are made for mounting this easel to the base frame of the enlarger With. the levelling mounts presently userd on the enlarger All t 5 multsneously. 25X1A Or the above work is estimated 'ibuted as I -arms and eonditi-h 25X1A ? Eng. Labor(Ino.overbend & Profit) Fabr. Labor('"' Install. Labor( r " $e made in 10 weeks, under present schedules, Government U. S. Washington D C. ATT: We trust the above Information IS satisfactory. Please advise m+s' if fu Very truly yours. Declass Review by NIMA/DOD Viet President Approved For Release 2002/06/17 : CIA-RDP78B04747A000900160026-8 SUBJECT 0 I for vacuum Easel for pumps, and control ci ii to Consist o r provide the vs, plate will be ec 25X1A " Approved For Release 002/0 !~1 47A000160026-8 1. AUTHORITY: Pursuant to the provisions of subject Contract and effective as of,~fj_ you are authorized to pro- ceed with the performance this Work Order No. 2. SPECIFICATIONS: The scope of work to be performed under this Work Order and such additional provisions, as may be applicable are set forth in the attached schedule. Unless you indicate to the contrary within ten (10) days from receipt hereof, you will be con- sidered as having agreed to the feasibility and completeness of this Work Order and to have in all respects accepted same for prompt per- formance. 3. COMPENSATION: Compensation of the Contractor under the Work Order shall be on the basis of the time and material rates set forth in the section of the subject Contract entitled "Compensation." If at any time the Contractor finds that there is to be substantial difference between the cost of this Work Order, determined as pro- vided above, and the estimated cost of the Work Order as set forth above, the Contractor shall promptly so notify the Contracting Officer. 4. GENERAL: It is specifically understood that this Work Order does not change or modify the terms and conditions of or the amount of funds obligated under the subject Contract as any such changes or modifications are expressly reserved for bilaterally executed con- tractual amendments thereto. 5. PACKING AND PACKAGING: Unless otherwise specified in the Schedule, packing and packaging of any deliverable items hereunder shall be in accordance with standard commerical practice for domestic shipment, as set forth in the Uniform Freight Classification for com- mercial practice, to assure arrival at destination in serviceable condition. 6. MARKINGS: No markings shall be applied on any interior packing material or container(s) or exterior of such container(s) that would identify the Purchaser. Further, no markings shall be applied on any interior packing material or container that would identify the consignee. 7. INSPECTION: Inspection during the course of performance of work authorized hereunder may be made by the technical repre- sentative(s) of the Contracting Officer. In any event, final in- spection and acceptance of any deliverable items shall be at con- signee destination as may be specified. Approved For Release 2002/06/17 : CIA-RDP78BO4747A000900160026-8 g ? Approved For Releas002/06/17 : CIA-RDP78BO4747A0009. OQ160026-8 8. SECURITY REQUIREMENTS: The item) per se under this Contractual document is O The association of the sponsor with the item(s) being procured hereunder is classified SECRET. This classified information shall be divulged only on a need-to-know basis and then only to those who have been authorized in writing by this Government component to have access to classified information. Correspondence originated by the Contractor and/or data to be submitted hereunder, the con- tents of which contain classified information or refers to the name and/or address of the Contracting Officer, shall be stamped by you with the classification of SECRET. Very truly yours, Contracting Officer BY Duly Authorized Representative Approved For Release 2002/06/17 : CIA-RDP78BO4747A000900160026-8 Approved For Relea 002/06/17 : CIA-RDP78BO4747A00090 160026-8 Work Order No. Contract 25X1A SCOPE OF WORK 9 0-4- 3 / C'tr-~ M 4"t -~ Estimated Completion or Delivery Date: To be completed on or about Consignee, Ship To, F.O.B. Point: Inspection Requirements A A _ G~.~rery As specified by the authorized 4.0.f`the Work Order, Technical Representative of the Con- tracting Officer. See Paragraph 7 Packing and Packaging: As specified by the technical representative of the Contracting Officer. See Paragraph 5 of the Work Order. MARKINGS'.- Per Paragraph 6 of the Work Order, if applicable. Additional Instructions: Overtime premium time in the amount of 1____ 'I is authorized, 25X1A Approved For Release 2002/06/17 : CIA-RDP78BO4747A000900160026-8