PROGRESS REPORT NO. 3 COLOR IMAGE ASSESSMENT PROJECT 6619

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP78B04747A001100030052-0
Release Decision: 
RIPPUB
Original Classification: 
K
Document Page Count: 
4
Document Creation Date: 
December 28, 2016
Document Release Date: 
November 26, 2001
Sequence Number: 
52
Case Number: 
Content Type: 
REPORT
File: 
AttachmentSize
PDF icon CIA-RDP78B04747A001100030052-0.pdf150.86 KB
Body: 
Approved For ease 2002/05/08 : CIA-RDP78BO4747AP01100030 PROGRESS REPORT NO. 3 COLOR IMAGE ASSESSMENT PROJECT 6619 Period: January 1 through January 31, 1969 Declass Review by NIMA/DOD Approved For Release 2002/05/08 : CIA-RDP78BO4747AO01100030052-0 Approved For ReJase 2002/05/08 : CIA-RDP78B04747A 1100030052-0 Contract Status Report No. 3 STATINTL PROGRESS DURING TIIE PERIOD Work has proceeded on the running of actual data through the Tape Translate program and through the ensemble averaging STATINTL program. The ensemble averaging program performs satisfactorily; program documentation is nearly complete for the ensemble averaging program and will be sent to the customer with a Fortran listing and example program output. Tapes 00546 and 00547 have.: been decoded and run through the ensemble averaging program. These tapes contained the analytical micro-step wedges for SO-121, SO-151, 8443, SO-155 and 8442 scanned with a 1 x 80 micron slit. The resulting step wedge averages were plotted with minor density as a function of major density for each wedge and the slopes of the resulting linear relationships were entered in the absorption coefficient matrix for SO-121, SO-151 and 8443. The inverse of the three resulting matrices (one each for SO-151, SO-121, and 8442) were created, yielding the conversion matrices for generating analytical filter microdensities from in- tegral filter microdensities. Examination of tapes 00493 and 00384 on which the desaturated wedges for SO-121 and SO-151 are recorded were examined. It `TFATINTL found that one trace, RO Si, was missing from each film set. The omission was found to be an error on the part of since the written instructions told the operator to trace wedge RO H instead of RO Si (there is no wedge RO H). Instructions were given to trace wedge RO Si on SO-151 and SO-121 each on separate tapes and send them to These tapes have not been received as yet. An attempt to read tapes 00493 and 00383 (the SO-121 and 8443 desaturated wedges) indicated tape errors existed. No tape errors have been detected on tape 00384 containing the SO-151 desaturated wedges. Approved For Release 2002/05/08 : CIA-RDP78BO4747AO01100030052-0 Approved For Ra ase 2002/05/08 : CIA-RDP78B04747AWl100030052-0 A call to the customer's facility yielded the information that they knew the problem existed, i,ut a satisfactory tape dump could not be generated to diagnose the problem. Examination of a tare dump STATINTLgenerated a-t showed that the customer's digitizer was occasionally inserting extra characters in the middle of a trichromatic density word. This insertion occurred before the blue density, between the blue and green or green and red densities or b .twtrc the two woI:Ji:; Comp: 1:: '; J "L