NOTICE: In the event of a lapse in funding of the Federal government after 14 March 2025, CIA will be unable to process any public request submissions until the government re-opens.

DEAR(Sanitized)

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP78B04747A002100040050-0
Release Decision: 
RIPPUB
Original Classification: 
K
Document Page Count: 
3
Document Creation Date: 
December 28, 2016
Document Release Date: 
December 28, 2001
Sequence Number: 
50
Case Number: 
Publication Date: 
March 29, 1962
Content Type: 
LETTER
File: 
AttachmentSize
PDF icon CIA-RDP78B04747A002100040050-0.pdf808.53 KB
Body: 
Approved For Release 2 DECLASS REVIEW by NIMA/DOD Approved For Release 2002/06/17 CIA-RDP78B04747A002100040050-0 6/17/98 Approved For Release 2002/06/17 : CIA-RDP78BO4747AO02100040050-0 ? ?? ? ? to propose telephone 4uotation 7V'~EjjE=--rype 829A Cory~j.arator specially modified for the -ir-iTf6-r---jj,ijo-o-ls of 70mm film. Used in this application the be 11 ? axis) will be 1 mm c P ., ? ? ? 11 ave turn of le screw.1 ? of the dial and 5mm travel per The secondary screw (Y axis) will have 1/2mm pitch', 2-1/2mrn ;lead, having a ~ multiple thread. its digitizing head will be geared for 500 counts per turn and the dial will have a least ? ? 11 The stage will advance 2-1/2mm travel per turn of the Y screw.. Motorized measuring travel of X axis (to left and right of operator) would be at a rate of approximately 12mm per second. This travel would be across the width of the f ilm. Pptical system and light source will be essentially the same as that made for the ~Type 42ZE Comparator. In this projection system the image ma i gnif i - cation at the 'screen would be 7-1 /ZX and the instrument should be operated in There will be adaptation provided for Magnetic Reading Heads Type o eacn screw. =cwu-ri 1.005mm motion of the stage. Film stage having manual film advance or 6'' spools of 70mm film will I ~ - -' means of a solenoid operated from a foot 1-ne pa-778--, of the film switch. Plus or minus Z* of rotation will be provided for alignment of one T)er cent avs. WR~Ier receipt of order a", 1-0. days,- net.310 days a,pgi~~ S, this can ? ie to de ar isfactory technical solution 111111!!! be mounted on a table with,special i to the rear of this