(Sanitized) EDITING TABLE

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04747A002300010011-4
• Release Decision: RIPPUB
• Original Classification: S
• Document Page Count: 1
• Document Creation Date: December 28, 2016
• Document Release Date: November 30, 2001
• Sequence Number: 11
• Publication Date: July 19, 1965
• Content Type: MF

Approved Fo O lease 2002/01 4e;CIA-RDP78B047 002300010011-4
TI
19
25X1A
9
2. First, the addition of a cutting edge is a definite
improvement over the old style where the film had to be cut
by pulling it along a straight edge. A second advantage is
that the vacuum holds the cut film in place, enabling the
user to make an accurate splice. However, it i recommended
that the vacuum stage be made of a transparent material. The
film splice support should also be transparent and etched to
enable-the user to see where the cut is to be de. The light
table needs an adjustable curtain to block off excess light
when less than 9.0" wide film is being edited. It is also
advisable that a double spool setup be incorpor ted on the
right side of the table to accommodate edited terial from
the master stock.
3. Because of the location of the cutting
difficulty is encountered in making a splice.
be made by leading with the left hand but it wo
desirable if the cutting knife was located in t
table.
/TSB-63/65
July 1965
ment, NPIC
knife some
he splice can
ld be more
25X1A
Distribution:
Orig + 1 - Addressee
1 - Ch/TSB
DECLASS REVIEW by NIMA/DOD
'.?'?. sour
Exctads! ft fl aLtcr.~at:.
ATTENTION:
SUBJECT:
25X1A
1. The editing table manufactured by
25X1A has been evaluated. It has two basic advantages over
aarrn. ~arir;; cad y
~$~~'r few k,
decia^ef;ieatina C
Approved For Release 2002/2hhcCtA-RDP78B04747A002300010011-4