PRE-ACCEPTANCE TESTS OF THE SEPRATRON PROCESSOR

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP78B04747A002400050015-5
Release Decision: 
RIPPUB
Original Classification: 
C
Document Page Count: 
1
Document Creation Date: 
December 28, 2016
Document Release Date: 
June 3, 2002
Sequence Number: 
15
Case Number: 
Publication Date: 
April 21, 1969
Content Type: 
MFR
File: 
AttachmentSize
PDF icon CIA-RDP78B04747A002400050015-5.pdf53.33 KB
Body: 
Approved For Release 2002/e> JJ)E-18B04747A0024a TSSG/ESD/TEB-14-69 21 April 1969 SUBJECT: Pre-Acceptance Tests of the 1. A tri was made during 7-12 April or e purpose of witnessing pre-acceptance tests of the reworked pro- cessor. The trip was extended by one day in order o compete the planned test program. This was caused by the contractor not having the machine completely ready for tests and because of sev- eral design failures made evident by the test program. 2. After an overall examination of the processor, tests were made for accuracy of machine controls, detrimental surface effects due to tracking, processing uniformity, gamma control, film drying, and for solution carryover between tank modules. These tests progressed rather slowly because of reasons given above. 3. Test results show that many problem areas and contract work statement discrepancies exist with the Processor in its present configuration. Major of these are, ~i,l the pro- cessor will not process film with uniformity, (2) will not dry film sufficiently, (3) requires externally supplied pre-heated replenishment chemicals at constant high temperatures thereby necessitating sophisticated support equipment, and (4) the pro- cessor requires considerable attention just to maintain it in an operating mode. 1. It is my opinion that the Processor requires major redesign and fabrication before any a itional testing is justified. This may not be desirable since some of the original major design concepts have been lost or proven unsuccessful in the development of the processor up to this time. Declass Review by NIMA/DOD NPIC TSSG ESD TEB Distribution: Orig. & 2 - NPIC/TSSG/ESD/TEB 1 - NPIC/TSSG/ESD !`'l - NPIC/TSSG/DED F- Approved For Release 2002/08/06 : M TW& A0 ROVIOTINk dcr z rat g a1'.0 E 25X1 25X1 25X1 25X1 25X1 25X1 25X1 25X1 25X1