CONTRACT(Sanitized)

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04747A002400060005-5
• Release Decision: RIPPUB
• Original Classification: K
• Document Page Count: 3
• Document Creation Date: December 28, 2016
• Document Release Date: May 31, 2002
• Sequence Number: 5
• Publication Date: August 27, 1968
• Content Type: LETTER

Approved For Release 2002/06/17 : CIA-RDP78B04747402400060
This propoied
assembly and te
the Sponsor.
Class film
fine a
TY redesign, fabrication
essoccecceptable to
US toedequ.ately, pro-
a film film
The tempetattta 1nd1datInsystem will be t
and reliability. If the present system Prove* unusable, it will
placed with a therMIster-operated system.
Cur intention will be to elevate the processing temperature
well above ambient, creating enough temperature difference as to eli-
minate the need for a refrigeration system in the processor.
Yesitiye Pressure
The bubbling problem causing the processing solutions to ov
flow onto the pumps may be eliminated by increasing the amount of
anti-foam agent used in these solutions. if this simple test proves
negative, it t ill become necessary to. Increase the exhaust duct size,
to reduce OW positive pressure build-up h module cover.
Declass Review by NIMA/DOD
Approved For Release 2002/06/17 : CIA-RDP78B04747A002400060005-5
MD13781304 47A002400060005-5
`Psugust
The film transport indicating system will consist of an inde-
pendent tachometer and an PPM indicating meter mounted adjacent to
the speed control knob on the front panel.
-V
Prails.PEPittein
The drain outlet SUM will be increased to accommodate ain-
ing all modules at one time.
laxec.
There era two possible design oPProache
11 be shall be studied
The simplest modification appears to
ond taro red COUrCe wh1tch will be mete
ation is eppftedto the nulsion as
:I -
drying problem
ed and processed
a film mantl-
e reslog E curves for
a basis to evaluate the perfor-
B Proceasing Parameiers
Sufficient film will be exposed under the same conditions as
the reference film samples and processed to the proper Time
Temperature and Type of chemistry to produce D log E curves
that approach those obtained with the reference film samples.
The gamma will be equivalent to the reference. Photographic
speed will be within 1 stop. Uniformity of development will
how a density variation of no more than +0.05 density units
an average density of 1.00 one 9 1/2" X 9 1/20. film sample.
? ./
Approved For Release 2002/06/17-: CIA-FkDP78B04747A002400060005:5
. ,
,
'?
Approved I:'or Release 2002/06/17 : CIA-RDP781304747A002400060005-5
August 21, 1968 .
pa les recognise that the perfotmenCerequirements in this redesign
n are thinthe original scope of the contract. The successful da'
strattOn of film processing capability shall constitute acceptance
heE 1PrOceaS?r.. This program May be completed within
your acceptance of this proposal.
STAT
STAT
Sinc
ly ro
e,
Approved FOr Release 2002/06/17 : CIA-RDP78604747A002400060005-5
t.