RESEARCH AND DEVELOPMENT PROJECT APPROVAL REQUEST

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP78B04747A002400070003-6
Release Decision: 
RIPPUB
Original Classification: 
C
Document Page Count: 
2
Document Creation Date: 
December 28, 2016
Document Release Date: 
May 15, 2001
Sequence Number: 
3
Case Number: 
Content Type: 
REPORT
File: 
AttachmentSize
PDF icon CIA-RDP78B04747A002400070003-6.pdf79.13 KB
Body: 
CONFIDENTIA I Apy pved Fin. Release 2001/08/13 : CIA-RSP''8B0*7A002400070003-6 RESEARCH AND DEVELOPMENT PROJECT APPROVAL REQUEST is proposed under a fixed-price contract wit I. Identification The development of a "Twin Light Source, Stereoscopic Light Table" Viewers and Other Interpretation Equipment. It is specifically compre- hended in the entry titled "Improved Viewer Components. on rac rocuremen c e u e or Fiscal Year 1965 under Category II, II. Objectives This development will involve the fabrication of one prototype twin light source, stereoscopic light table and one set of directly reproducible manufa.cturing drawings and specifications. The project should result in a sophisticated prototype built with proper attention to human engineering and which will be evaluated under operational conditions. The main purpose for this development is to obtain a, stereo- scopic light table that will enable the operator to vary the illumination intensity of each of the viewing channels. The table can be tilted to positions convenient for the operator. III. Background Light tables which are currently being used and which have a support for a stereoscope do not have sufficiently large, independently illuminated viewing areas and cannot be tilted to positions convenient for the user. If stereo-pairs have different densities or require differing magnifications, it has been impossible for the operator to achieve balanced illumination. The development will allow the operator to vary the intensity of the two independent light sources. IV. Technical Specifications The twin light source, stereoscopic light table will be a pro- totype device incorporating the fo71lowing characteristics: a. The light table mays be tilted from 00 -450. b. For use with stereo chips, it will have an adequate viewing area divided by a removable partition into two independent light sources for viewing of stereo-pairs which differ in densities or scale. Declass Review by NIMA / DoD Approved For Release 2001/08/13 : CIA-RDP78B04747A002400070003- CONFIDENTIAL GROUPI Excluded I, dow ngc.din and declo.a~ific AwovedWw ReleaseO200F~D /13 CIA- D'P78136 47AO02400070003-6 c. The light sources are to be high-intensity, cold, cathode grids which will provide maximum screen brightness and evenness of illumination. Maximum intensity for each light source will be 2000 foot-lamberts. d. The design is to incorporate a, highly reliable dimming control by which brightness can be varied over the entire range (2000-200 foot-lamberts) without flickering. e. The tilting mechanism is a. captive slotted linkage which provides continuous adjustment throughout the 450 range. 2 2001/0 Approved For Release C ON8Jl3MLp P78BO4747AO02400070003-6