EQUIPMENT INSTALLATION

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP78B04770A000800130002-9
Release Decision: 
RIPPUB
Original Classification: 
S
Document Page Count: 
2
Document Creation Date: 
December 28, 2016
Document Release Date: 
July 2, 2004
Sequence Number: 
2
Case Number: 
Publication Date: 
May 31, 1966
Content Type: 
PERRPT
File: 
AttachmentSize
PDF icon CIA-RDP78B04770A000800130002-9.pdf56.12 KB
Body: 
Approved For Re&e 2004/07/,9ECIR-S1FP78B04770AW00130002-9 25X1 FY-66 Quarterly Report No. 4 SUBJECT: Equipment Installation PAR 238 31 May 66 TASK/PROBLEM 1. Install and check out the following equipment at the customer's facility: a. Roller Transport Processor (12-Inch). b. Roller Transport Processor (24-Inch. DISCUSSION 2. During March 66, successful processing of single-weight 25X1 print paper was demonstrated on the RT 24-Inch Processor using a six-inch- 1 1 long lead tab of I Iwith a 5/8-inch to 3/4-inch-wide plastic screen interspaced across the full width of the print between the Il and the paper print. Slits, 3/8-inch long and spaced 1-inch apart, were cut in the screen. Interlacing the print with the screen provided adequate protection for the leading edge of the print. The print was maintained in position in the interlacing by short lengths of tape placed in the center and at each edge of the splice. 3. A mechanical fixture was used to assist the assembly of lead tab to print at the head end of the processor. It has been demonstrated that one man with the aid of the mechanical fixture can assemble the print material to the lead tab and continuously operate the machine. 4. At an operating speed of 5.5 feet per minute, one was was able to maintain a maximum spacing of one foot between assemblies of the lead tab and a 24-inch by 20-inch print as they were fed into the machine. 5. Prints, 24-inches wide by 30-inches long, were also successfully processed using the method described. 6. In messages 4132 and 4133, dated 14 Apr 66, the contractor re- quested permission to close PAR 238. 7. Customer message 77284, dated 23 May 66, authorized this PAR to be closed. Declass Review by NGA. 25X1 EXCLUDED FROM AUTOMATIC DOWNGRADING SECRET AND DECLASSIFICATION Approved For Release 2004/07/29 : CIA-RDP7 770 " _ _? 0013000-9 Approved For Rose 2004/07 C FbP78BO4770AW800130002-9 PAR 238 31 May 66 PLAN ED ACTIVITY 8. No further action. SECRET (EXCLUDED FROM AUTOMATIC DOWNGRADING AND DECLASSIFICATION Approved For Release 2004/07/29 : CIA-RDPThb047 300U2-9