MOSCOW AIRFRAME PLANT FILI NO. 23

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78T05439A000500090014-6
• Release Decision: RIPPUB
• Original Classification: T
• Document Page Count: 2
• Document Creation Date: December 28, 2016
• Document Release Date: February 6, 2001
• Sequence Number: 14
• Publication Date: May 12, 1965
• Content Type: MF

ILLEGIB
Approved For Release 2001/03/03 : CIA-RDP78TO5439A000500090014-6
Approved For Release 2001/03/03 : CIA-RDP78TO5439A000500090014-6
 OLE
T IORATJD"JM FOR: Chief, International. Trade and Services Division, ORR
25X1A
25X1 D
25X1 D
ATTENTION
THROUGH
rtROM
TCS No. 8273/65
IB No. 185/65
'12 May 1965
MS/CST
. Chief, Requirements Branch, Reconnaissance Group, CGS
Chief, Photographic Intelligence Division, CIA
(1) ORR Requirement No. C-RR5-82,573
(2) CIA/PID Project No. 30667-5
ILLEGIB
1. Th s memorandum is in response to the above referenced requirement
concerning Moscow Airframe Plant Fili No. 23. The purpose of the project
is to determine the status of two areas cited as "construction activity"
in report number CIA/PIR-42/64.
2. In the large area adjacent to building number 12 (CIA/PIR-42/64),
a large probable machine shop/workshop has been erected. This building,
measuring 610 x 260 with an estimated height of 50 feet,is now in the
final stages of construction. Ground scarring- for this building was first
evident on Activity in the second
area can not be determined at this time because of the poor quality of
the photography over this portion of the plant. Photo raphy used for this
project was from
3. All measurements have been made by the CIA/PID project analyst.
They should not be construed as being mensuration data compiled by the NPIC
Technical Intelligence Division.
4. The photo analyst for this project was who
may be contacted on extension 2547 should there be any further questions.
This project is complete as of the date of this memorandum. 25X1A
Declass Review by NIMA/DOD
25X1A
F-( 1
TALL- ~~TOLE
3=0; 4 T ROL SYSTEM ONLY