SYSTEM 1: PARTS-DATA LIST

• Document Type: CREST
• Collection: General CIA Records
• Document Number (FOIA) /ESDN (CREST): CIA-RDP81B00878R000200040001-0
• Release Decision: RIPPUB
• Original Classification: C
• Document Page Count: 155
• Document Creation Date: November 11, 2016
• Document Release Date: March 1, 1999
• Sequence Number: 1
• Publication Date: May 29, 1956
• Content Type: LIST

Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
SYSTEM I
PARTS-DATA LIST
1142,. 4R ;'Sh P,' ,T:
&1 r :.- g-V 7-( 9
The Ramo-Wooldridge Corp.
8820 Bellanca Avenue
Los Angeles _45, California
Approved For Release
a wwc_ 5- /'7 A,
Technical Publications
Communications Division
29 May 1956
 Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
ORGANIZATION OF THE PARTS-DATA LIST
The parts-data list is divided into three sections. The first section of the list describes all
of the replaceable parts and assemblies which constitute the airborne equipment. The second
section of the list describes all of the replaceable parts and assemblies of the ground-based
equipment. The third section contains an alphabetical list of manufacturers' names and addresses.
Only PARTS considered replaceable are listed. Where a special fixture is required to disassemble
and re-assemble parts, the parts are not considered replaceable, and the entire assembly is listed.
Standard hardware items are not included in the list, but all electronic parts are tabulated.
Where a particular type of part (e. g., a 100-ohm resistor) is used in more than one place, the
number of such parts used in the equipment is listed in the ITEMS PER EQUIPMENT column of the
parts-data list. The number of items used in the equipment is listed opposite the initial part
description. Descriptions of duplicate parts are limited to "Same as ... , " and the number of
items per equipment is not repeated.
In Section I of the parts-data list, each number of ITEMS PER EQUIPMENT is tabulated in terms of
the System 1 airborne equipment. In Section II, ITEMS PER EQUIPMENT refers to the ground-based
equipment.
Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
 Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
The first item listed on Sheet 1 is the MASTER ASSEMBLY. This MASTER ASSEMBLY includes all
of the equipment units (COMPLETE ASSEMBLIES) and interunit cables which comprise System 1
airborne equipment. On the MASTER ASSEMBLY drawing, the equipment units are referred to by
letter-number designations (Al, B, W1201, etc.). Also, each equipment unit has a nameplate bearing
an MP number (MP10922, MP10737, etc.). The first two pages of the parts-data list provide a
correlation between the letter-number designations and the MP-number designations.
Each item listed in the parts-data list bears an item number. The item numbers are assigned in
sequence (beginning with item 1) to each COMPLETE ASSEMBLY, to each ASSEMBLY, and to each
PART. As an index, the item numbers pertaining to each COMPLETE ASSEMBLY are listed on the
first two sheets of the parts-data list.
The MP number of one of the COMPLETE ASSEMBLIES appears at the top of each of the pages.
Replaceable ASSEMBLIES of the COMPLETE ASSEMBLY are listed on these pages, with replaceable
PARTS of the ASSEMBLIES listed immediately below the ASSEMBLY description. The left-hand
margin of each PART description is indented.
Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
am
 EQUIPMENT (NOMENCLATURE) SYSTEM 1
NAME OF CONTRACTOR The aW7o- oo ri ge ,- NTRACT - roj ect
SHEET 1 OF 148 SHEETS
PARTS DATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
SYSTEM ONE, MASTER ASSEMB
Y
R-W Dwg.
The master assembly includes the
50400001
following units:
(Either) MP10922. This unit is a
UNIT
MP10922
Ramo-
R-W Dwg.
2 Req. Per
complete assembly. Replaceable
Al
Wooldridge
50402014
System
arts and assemblies are listed
as items 1 through 7.
(Or) MP10308. This unit is a
UNIT
MP10308
Ramo-
R-W Dwg.
2 Req. Per
complete assembly. Replaceable
AZ
Wooldridge
50402025
System
arts and assemblies are listed as
items 8 through 12.
MP10641. This unit is a complete
UNIT
MP10641
Ramo-
R-W Dwg.
2 Req. Per
assembly. Replaceable parts and
Cl
Wooldridge
50404078
System
assemblies are listed as items
13 through 113.
MP10737. This unit is a complete
UNIT
MP10737
Ramo-
R-W Dwg.
1 Req. Per
ssembly. Replaceable parts and
B
Wooldridge
50401002
System
assemblies are listed as items
114 through 468.
P10406. This unit is a complete
UNIT
MP10406
Ramo-
R-W Dwg.
1 Req. Per
assembly. Replaceable parts and
C2
Wooldridge
50403201
System
assemblies are listed as items
469 through 491.
P63003. This unit is a complete
W1201
MP63003
Ramo-
R-W Dwg.
1 Req. Per
assembly. Replaceable parts and
and
Wooldridge
50400002
System
assemblies are listed as items
W1204
1 Req. Per
492 through 494.
System
P63005. This unit is a complete
W1202
MP63005
Ramo-
R-W Dwg.
1 Req. Per
assembly. Replaceable parts and
Wooldridge
50400003
System
assemblies are listed as items
495 through 497.
Approved
orReleas
1999/09/08-:CIA-
DP81B00878R0
0200040001-0
 EQUIPMENT (NOMENCLATURE) SYSTEM 1 SHEET 2 OF SHEETS
NAME OF CONTRACTOR RamcApv lfld dRJlea3ed9
1P ecIA-RD IBD&8 88001 4D04oo01-o
PARTS D
3 4 5 6 7 8
ATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
MP63004. This unit is a com-
W1203
MP63004
Ramo-
R-W Dwg.
1 Req. Per
plete assembly. Replaceable
Wooldridge
50400004
System
parts and assemblies are listed
as items 498 through 502.
MP63006. This unit is a com-
Wl205
MP63006
Ramo-
R-W Dwg.
1 Req. Per
plete assembly. Replaceable
Wooldridge
50400005
System
parts and assemblies are listed
as items 503 through 511.
MP10566. This unit is a com-
TEST
MP10566
Ramo-
R-W Dwg.-
plete assembly. Replaceable
SET
Wooldridge
50403357
parts and assemblies are listed
as items 512 through 824.
RE-RECORD EQUIPMENT.
This equipment includes the
replaceable parts and assemblie
listed as items 825 through 848.
AUXILIARY EQUIPMENT.
Equipment and supplies used in
operating and maintaining System
1 are listed as items 849 through
891.
Approve
For Relea
se 1999/09/08 Cl
-RDP81B00878
000200040001-0
 Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
PARTS-DATA LIST
SECTION I
AIRBORNE EQUIPMENT
Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
soft
 EQUIPMENT (NOMENCLATURE) MP10922 OF SYSTEM 1
NAME OF CONTRACTOR Ramp=
SHEET 3 OF SHEETS
PARTS D
ATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF. ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
1
MP10922, COMPLETE ASSEMBL
UNIT
MP10922
Ramo-
R-W Dwg.
2 Req. Per
Over-all dimensions 9. 95 in. lg
Al
Wooldridge
50402014
System
x 11. 81 in. dia. MP10922 engrave
on nameplate. Consists of the
following replaceable parts and
assemblies:
2
DIPOLE AND REFLECTOR
MP10310
Ramo-
Items 1, 2, 5,
1 Req. Per
Assembly. Consists of a double-
Wooldridge
6, and 7 of
Complete
dipole reflector feed, reflector,
R-W Dwg.
Assay.
and center-conductor assembly.
50402014
(2/Sys.)
Over-all dimensions 6.88 in. lg
x 11. 81 in. dia. MP10922 engrave
on nameplate.
3
CONNECTOR, Main Tube. Made
MP10114
Ramo-
R-W Dwg.
1 Req. Per
from #2024 ST-4 aluminum bar.
Wooldridge
50402011
Complete
Over-all dimensions 0.812 in. lg
Assay.
x 0.750 in. dia. One end has an
(2/Sys.)
0. D. of 0.520 in., an I. D. of
0.284 in. with a 5/16-48 NF-3
thread 0.250 in. Ig. The other
end has an O. D. of 0.470 in.
with a 15/32-40 NF-3 thread
0.130 in. lg, an I. D. of 0. 374 in.
The 0.750 in. dia is medium
knurled. Connector is gold
plated.
4
BUSHING, Conductor Support.
MP10307
Ramo-
R-W Dwg.
1 Req. Per
Made from teflon 0. 500 in. lg x
Wooldridge
50402013
Complete
0.375 in. dia with a 0.ll5 in. dia
Assay.
hole through the center.
(2/Sys.)
5.
ADAPTER, Coaxial. Made from
MP10097
Ramo-
R-W Dwg.
1 Req. Per
#2024 ST-4 aluminum bar. Over-
Wooldrid a
50402012
Complete
all dimensions 0. 600 in. CP."S
For Rele
se 1999/09/08 CI
-RDP81B00C78
000200040001-0
Assy.
(2/Sys.)
orp CONTRACT R-W Project 5021
 EQUIPMENT (NOMENCLATURE) MP10922 OF SYSTEM 1
NAME
OF
CO
TRACTOR Ram - oo ge orpCONTRACT
COMPLETE DESCRIPTION OF ITEM
ADAPTER, Coaxial. (Cont'd.)
in. dia. One end has an 0. D. of
0. 75 in. medium knurled, an I.
of 0.438 in. with a 7/16-40 NF-3
thread 0. 125 in. ig. The other
end' has an 0. D. of 0.625 in.
with a 5/8-24 NF-3 thread 0.354
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
SHEET 4 of SHEETS
rojec
PARTS DATA LIST
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
Ramo-
Wooldridge
R-W Dwg.
50402012
1 Req. Per
Complete
Ass 'y.
(2/Sys.)
in. lg. Adapter is gold plated.
CRYSTAL MOUNT, Coaxial.
Waveline,
I Req. Per
Over-all dimensions 2. 375 in. 1g
Inc.
Complete
x 0. 820 in. dia. Nickle plated.
As s'y.
(2/Sys.)
CRYSTAL. Silicon diode Type
Microwave
1 Req. Per
MA-408. Over-all dimensions
Assoc.
Complete
0.550 in. lg x 0.160 in. wide x
As s'y.
0.160 in. high. Marked as fol-
(rISys. )
lows: MA-408 Microwave.
Approved
For Releate 1999/09/08 : CII-RDP81B00878RQ0020~001-0
 EQUIPMENT (NOMENCLATURE) MP10308 OF SYSTEM 1
NAME OF CONTRACTOR Ram o
SHEET 5 OF SHEETS
PARTS D
ATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
8
MP10308, COMPLETE ASSEMBL
UNIT
MP10308
Ramo-
R-W Dwg.
2 Req. Per
Over-all dimensions 6.44 in. lg
AZ
Wooldridge
50402025
System
x 6. 53 in. dia. MP10308 engraved
on nameplate. Consists of the
following replaceable parts and
assemblies:
9
DIPOLE AND REFLECTOR
MP10183
Ramo-
Items 1, 2, 3,
1 Req. Per
Assembly. Consists of a double-
Wooldridge
and 6 of R-W
Complete
dipole wave-guide feed, wave
Dwg. 50402025
Ass'y.
guide, and reflector. Over-all
(2/Sys.)
dimensions 4.688 in. ig x 6. 53
in. dia. MP10308 engraved on
nameplate.
10
FLANGED-WAVEGUiBE AND
MP10152
Waveline,
#616C-BNC
1 Req. Per
CRYSTAL HOLDER Assembly.
Inc.
Complete
Waveline Type #616C-BNC.
Ass'y.
(2/Sys.,)
11
CAP, Crystal Holder. Waveline
MP10084
Waveline,
1 Req. Per
type (for above).
Inc.
Complete
Ass 'y.
(2/Sys.)
12
CRYSTAL. Silicon diode Type
MP55002
Microwave
MA-408
1 Req. Per
MA-408. Over-all dimensions
Assoc.
Complete
0.550 in. lg x 0.160 in. wide x
Ass'y.
0.160 in. high. Marked as fol-
(2/Sys.)
lows: MA-408 Microwave.
Approve
For Rele
se 1999/09/08 : CI
-RDP81B00878
000200040001-0
 EQUIPMENT (NOMENCLATURQ MP10641 OF SYSTEM 1
nnro?od For R I ace 1999109/08
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
1 2 3 4 5 6
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
13
MP10641 COMPLETE ASSEMBLY.
UNIT
MP10641
Ramo-
R-W Dwg.
2 Req. Per
Over-all dimensions 7.125 in. lg
Cl
Wooldridge
50404078
System
x 5.125 in, wide x 1.968 in. high.
MP10641 engraved on nameplate.
Consists of the following replace-
able parts and assemblies:
14
COVER ASSEMBLY. Formed
MP10142
Ramo-
R-W Dwg.
1 Req. Per
from 0. 032 in. sheet aluminum.
Wooldridge
50404061
Complete
Over-all dimensions 7.125 in. lg
Ass'y,
x 5.125 in. wide x .768 in. high.
(2/Sys.)
Drilled for mounting on the case
assembly. Has four spacers for
mounting the printed-circuit-
board assembly. Includes three
permanently-mounted and her-
metically-sealed jacks and a
gasket. MP10641 engraved on
nameplate. Black-wrinkle fish.
-15
CASE ASSEMBLY.. Formed
MP10141
Ramo-
R-W Dwg.
1 Req. Per
from 0.032 in. sheet aluminum.
Wooldridge
50404059
Complete
Over-all dimensions 7.00 in. lg
Ass'y..
x 5.00 in. wide x 1.21 in. high,
(2/Sys.)
seven drilled and tapped mount-
ing posts. Black-wrinkle finish.
16
PRINTED CIRCUIT BOARD
MP10002
Ramo-
R-W Dwg.
1 Req. Per
ASSEMBLY. Printed-circuit
Wooldridge
50404016
Complete
board, complete with all electri-
Ass'y.
cal and mechanical parts. Over
(2/Sys-)
all dimensions 6. 50 in. lg x 4. 81
in. wide x 1. 375 in. high
The following parts of the printed
circuit board assembly are re-
placeable: Approve
For Rele
se 1999/09/08 CI
-RDP81B00878
000040001-0
SHEET 6 OF
PARTS
7 8
SHEETS
TA LIST
 EQUIPMENT (NOMENCLATURE) MP10641 OF SYSTEM 1
NAME OF CONTRACTOR RamAplV di~M' el a SJ5.1L AE-If-KWdWTn'
1 2 3 4 5
COMPLETE DESCRIPTION OF ITEM
CAPACITOR, tantalum, dry
electrolytic, polarized 0, 875 in.
lg x 0.281 in. dia, 4 mfd,
150 vdcw, +85C to -55C operating
temperature
CAPACITOR, fixed, ceramic-
dielectric, 0. 500 in. lg x 0.250
in, dia, 1000 mmf, + 20%, 600
vdcw, 85C operating temperature
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
MP30003 (General
Electric
ACTUAL MFG.
OF ITEM
MP30045 Centralab
C103
C104
CAPACITOR, fixed, flat disc
C105
MP30041
Erie
ceramic, 0.5938 in. dia, 0.02
mfd, 600 vdcw
Same as C105
C108
Same as C101
C109
Same as C102
C110
CAPACITOR, fixed, silver mica,
MP30035
El Menco
0.7812 in. lg x 0.4375 in, wide x
0. 2188 in. thick, 1000 mmf, + 5%
500 vdcw
Same as C105
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
SHEET
PARTS
RECOMMENDED QUAN.
PER EQUIPMENT
SHEETS
TA LIST
Approvep For Rele4se 1999/09/08 : C
 EQUIPMENT (NOMENCLATUR~~nro~~ed F10641 a (69.08:'CIA-RDP81 B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
I 2 3 4
SHEET 8 OF SHEETS
PARTS DATA LIST
5 6 7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
27
Same as C105
C115
28
Same as Clll
CI-16
29
CAPACITOR, fixed, sub-minia-
C1.17
MP30005
Mallory
TAP
8
ture electrolytic; 0. 375 in. lg x
0.219 in. dia, 2 mfd, 100 vdcw,
+85C to -55C operating temper-
ature
30.
Same as C105
CI-18
-
31,
Same as C117
C119
32
Same as C105
C120
33
Same as C105
C121
34
Same as C102
0122
35
CAPACITOR, dc, tantalum, dry
C123
MP30002
General
29F469
4
electrolytic, polarized, 0. 687 i
Electric
lg x 0.187 dia, I. mf d, 150 vdcw,
+85C to -55C operating temper-
ature
36
Same as C123
C124
37,
Same as C102
C125
38
Same as C105
C126
39
Same as C102
C129
40
CAPACITOR, fixed, silver
C130
MP30040
El Menca`
DM15C301J
2
mica, 0.4375 in, lg x 0. 3438 in.
.wide x 0.2188 in, thick, 300 mrxi
,
+ 5%, 500 vdcw, j+1250 to -55C
operating ermperature
Approved
or Releas
1999/09/08 : CIA
RDP81BOO878R
0200001-0
 EQUIPMENT (NOMENCLATURE) MP10641 OF SYSTEM 1
NAME OF CONTRACTOR 200040001-0
Ram - oo dredge CorpCONTRACT R-W Project 5021
41
I 2 3 4 5 6
COMPLETE DESCRIPTION OF ITEM
CAPACITOR, fixed, silver
mica, 0.4375 in. lg x 0.3438 in.
wide x 0. 2188 in." thick, 500 miff
+ 5%, 500 vdcw, +125C to -55C
operating temperature
Same as C105
Same as C105
DIODE, silicon junction, 0. 210
in.. lgx0.210in. widex0.135
in. thick, 2 leads, 1. 50 in. lg
x 0.017 in, dia
Same as CR102
DELAY LINE, 4.00 in. lg x
0.375,in. dia,. 500 ohmimpe-
dance
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK ' NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
DM19C501J
C134
MP64002
Texas 601C-
Instrunent
Brubaker.
DL-190
Approv d For Rel se 1999109108: IA-RDP81B0087 000200040001
SHEET 9 OF SHEETS
PARTS DATA LIST
7 8
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
 A
EQUIPMENT (NOMENCLATUR~prove~alee~~y~~g81: CIA-RDP81B00878R000200040001-0 SHEET 10 of SHEETS
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
I 2 3 4 5 6
PARTS DATA LIST
7 8
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
RESISTOR, fixed, composition,
MP20234
Allen-
RCZOGF153J
15, 000 ohms, + 5%, 1/2 watt
Bradley
RESISTOR, fixed; composition,
4700 ohms, + 5%, 1/2 watt
RESISTOR,. fixed, composition,
MPZOZ19
MP20189
Allen-
Bradley
Allen-
RCZOGF47ZJ
RCZOGF392J
3900 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
MP20~22
Bradley
Allen-
RC20GF271J
270 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
R105
MP20296
Bradley
Allen-
RC20GF104J
100, 000 ohms, + 5%, 1/2 watt
Bradley
53
RESISTOR, fixed, composition,
MP20002
Sprague
6800 ohms, + 5%, 3 watt
RESISTOR, fixed, composition,
MP20321
Allen-
RC30GF512J
55
5100 ohms, + 5%, 1 watt
RESISTOR, fixed, composition,
Rll0
MP20146
Bradley
Allen-
220 ohms, + 5%, 1/2 watt
Bradley
Approved or Releas 1999/09/08 : CIA- ~tDP81B00878R0 0200040001-0
 A proved For Release J9,9f09/
08 : CIA-RDP81 B00878R000200040001-0
1
EQUIPMENT (NOMENCLATURE) MP10641 OF SY
NAME OF CONTRACTOR Ramo-Wooldridge Corp.CONTRACT R-W Project 5021
1 2 3 4 5 6
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
SHEET 11
SHEETS
PARTS D
7 8
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
RESISTOR, fixed, composition,
3000 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
MP20368
Allen-
Bradley
Allen-
RC2001223J
22, 000 ohmp,. + 5%, 1/2 watt
Bradley
RESISTOR, fixed, composition,
R116
MP20174
Allen-
RC 20 GF 511J
I
510 ohms, + 5%6, 1/2 watt
Bradley
RC20GF182J
RESISTOR, fixed, composition,
1800 ohms, + 5%, 1/2; Watt
Allen-
Bradley
68
Same as R105
Same as R103
Same as Rill
RESISTOR, fixed, composition,
13, 000 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
7500 ohms, + 5%, 1/2 watt
Same as R105
RESISTOR, fixed, composition,
Bradley
1, 0 meg, + 5%, 1/2 watt
RESISTOR, fixed, comp~spirtLon F r se ,999 JQM1 $- 'JQ0878R00 20004f1~I
10, 000 ohms, + 5%, 1/2 watt Bradley Z
R118
R122
R123
R124
R126
MP20263
Allen-
Bradley
Allen-
Bradley
ATA LIST
RC20GF133J
RC20GF105J
RC20 GF103J
 EQUIPMENT (NOMENCLATURE) MP10641 OF SYSTEM 1
NAME OF CONTRACTOR R oo ri ge orp CONTRACT roJect
69
73
79
COMPLETE DESCRIPTION OF ITEM
RESISTOR, fixed, composition,
4. 7 meg, + 5%6, 1/2 watt
RESISTOR, fixed, composition,
2.2 meg, + 5%, 1/2 watt
RESISTOR, fixed, composition,
27, 000 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
62, 000 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
3300 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
6800 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
2000 ohms, + 5%, 1/2 watt
Same as R103
RESISTOR, fixed, composition,
470, 000 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
560, 000 ohms, + 5%, 1/2 watt
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
MP20107
MP20153
MP20325
MPZOZ06
MP20271
MP20254
MP20104
MP20375
MP20176
ACTUAL MFG.
OF ITEM
Allen-
Bradley
Allen-
Bradley
Allen-
Bradley
Allen-
Bradley
Allen-
Bradley
Allen-
Bradley
Allen-
Bradley
-Allen-
Bradley
Allen-
Bradley
Approve
I f t For Rele e1999/09/08:C1 -RDP81B00878 0020001-0
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
SHEET 12 OF SHEETS
PARTS D
ATA LIST
RECOMMENDED QUAN.
PER EQUIPMENT
RC20GF475,
RC20GF225J
RC20GFZ73 J
RC20GF623J
RC20GF332;
RC20GF6823
RC2OGF202,
RCZOGF474
RC20GF564,
 EQUIPMENT (NOMENCLA-UREAppr 0o1FQKaA~~i 9)08: CIA-RDP81B00878R000200040001-0 SHEET 13 OF SHEETS
NAME OF CONTRAC
TOR Ramo-Wooldridge Corp.( -
1
3 4
R-W Project 5021
5 6
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
81
Same as Rill
R146
82
Same as R128
R147
83
RESISTOR, fixed, composition,
R150
MP20167
Allen-
EB
2
RCZOGF303J
30, 000 ohms, + 5%, 1/2 watt
Bradley
84
RESISTOR, fixed, composition,
R151
MP20320
Allen-
EB
2
RC20GF154J
150, 000 ohms, + 5%, 1/2 watt
Bradley
85
RESISTOR, fixed, composition,
R152
MP20101
Allen-
EB
17
RC20GF224J
220, 000 ohms, + 5%, 1/2 watt
Bradley
86
RESISTOR, fixed, composition,
R153
MPZ0116
Allen-
EB
7
RCZOGF512J
5100 ohms, + 5%, 1/2 watt
Bradley
87
RESISTOR, fixed, composition,
R154
MP20106
Allen-
EB
2
RCZOGF114J
110, 000 ohms, + 5%, 1/2 watt
Bradley
88
Same as R115
R157
89
RESISTOR, fixed, composition,
R158
None
Allen-
EB
2
+ 5%6, 1/2 watt, value selected on
Bradley
'&asis of equipment performance
90
RESISTOR, fixed, composition,
R159
None
Allen-
EB
2
+ 5%, 1/2 watt, value selected on
Bradley
asis of equipment performance
91
RESISTOR, fixed, composition,
R160'
MP20180
Allen-
EB
3
RCZOGF363J
36, 000 ohms, + 5%, 1/2 watt
Bradley
Approv
For Rele
se 1999109/08: C
-RDP81B00878
000200040001-0
92
Same as R115
R161
PARTS DATA LIST
7 8
ONTRACT
 EQUIPMENT (N O M E N C L A TU R f proMedl For Reellease 1999/09/08 ? CIA-RDP81 B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
I 2
ITEM NO
. COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
93
Same as R152
R164
94
Same as R127
R165
95
RESISTOR, fixed, composition,
R166
MP20103
Allen-
EB
4
RCZOGF243L
24, 000 ohms, + 5%, 1/2 watt
Bradley
96
Same as R166
R167
97
RESISTOR, fixed, composition,
R168
MP20218
Allen-
EB
2
RC20GF432:
4300 ohms, + 5%, 1/2 watt
Bradley
98
RESISTOR, fixed, composition,
R171
None
Allen-
EB
2
+ 5%, 1/2 watt, value selected on
Bradley
Easis of equipment performance
99
RESISTOR, fixed, composition,
R172
MP20079
Sprague
151E
4
12 ohms, + 5%, 3 watt
100
Same as R172
R173
101
RESISTOR, fixed, composition,
R174
MP20001
Sprague
151E
2
43 ohms, + 5%, 3 watt
102
TRANSFORMER, pulse. Over-
T101
MP58003
Magnecraft
TV1125A
2
all dimensio s 0. 625 in. lg x
Electric Co
0.625 in. dia, 2 windings, pri-
mary to secondary turns ratio
1. 8 to 1, 3000 ohm primary im-
pedance
103
ELECTRON TUBE, sub-mina-
V101
MP45002
Raytheon
CK6152
22
ture
Approve
For Relea
e 1999/09/08 : Cl
-RDP81B00878
00200040001 -0
7
SHEET 14 OF SHEETS
PARTS DATA LIST
3 4 5 6 7 8
 EQUIPMENT (NO MEN CLATUR.EJprove 86fleb sPS L009A0f : CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR
Ramo-Wooldridge Corp.CONTRACT R-W Project 5021
! 2
ITEM NO. COMPLETE DESCRIPTION OF ITEM
SHEET. 15 of SHEETS
PARTS DATA LIST
3 4 5 6 7 8
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
104
Same as V101
V102
105
Same as- V101
V103
106
Same as V101
V104
107
Same as V101
V105
108
Same as V101
V106
109
Same as V101
V107
110
Same as V101
V108
111
Same as V101
V109
112
Same as V101
V1.10
113
Same as V101
Vu
Approved
or Releas
1999/09/08 CIA-
DP81B00878RO
OSM40001-0
 NAME
OF CONTRACTOR Ramo-Wooldridge CorpCONTRACT R-W Project 5021
ITEM NO.ICOMPLETE DESCRIPTION OF ITEM
MP10737, COMPLETE ASSEM-
SLY. Over-all dimensions 15.25
in. lg x 12.31 in. wide x 3. 5 in.
high. MP10737 engraved on nam
plate. Consists of the following
replaceable parts and assemblies:
115 TAPE REEL AND RING GEAR
ASSEMBLY. Over-all dimensims
10. 5in. dia x 0. 50 in, wide.
Consists of tape reel, ring gear,
huh and decal.
SHEET 16 OF SHEETS
PARTS
DATA
4
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
UNIT
B
MP10737
Ramo-
Wooldridge
R-W Dwg.
50401002
Req. Per
System
MP10015
Ramo-
R-W Dwg.
2 Req. Per
Wooldridge
50401508
Complete
Ass 1y-
(Z/Sys.)
TOP COVER ASSEMBLY. Made
from. sheet aluminum. Over-all
dimensior:'S 14.94 in. lg x 12.10
MP10069
Ramo-
Wooldridge
R-W Dwg.
50401355-1
in. wide x 1. 375 in. high. Wrinkle
black finish.
117
BOTTOM COVER ASSEMBLY.
Ramo-
R-W Dwg.
Over-all dimensions 14.94 in. lg
12.10 in. wide x 1. 906 in. high.
Consists of the following replace-
able parts and assemblies:
Wooldridge
50401002
118
COVER, Bottom. Made from
MP10236
Ramo-
R-W Dwg.
sheet aluminum. Over-all
Wooldridge
50401355-2
dimensions 14.94 in. lg x
12.10 in. wide x 1.375 in.
high, with a 0.328-in. -dia
hole 3. 54 in. from one side
and 2. 83 in. from one end.
Wrinkle black finish.
Approved
For Relea~ 1999/09/08 : CIA RDP81BOO878RT0200040001-0
9
1 Req. Per
Complete
Ass 'y.
(1/Sys. )
1 Req. Per
Complete
Ass 'y.
(1/Sys.)
1 Req. Per
Ass y.
:(1/Sys. )
LIST
 EQUIPMENT (NOMENCLATURE)
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
I 2
SHEET 17 OF SHEETS
PARTS DATA LIST
8 9
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
1-19
CASE, Desiccant. Made from
MP10237
Ramo-
R-W Dwg.
1 Req. Per
sheet aluminum. Over-all
Wooldridge
50401450
Ass'y.
dimensions 2. 00 in. lg x 1. 75
(1/Sys.)
in. wide x 1.00 in. high.
120
COVER, Desiccant Case. Ma
MP10238
Ramo-
R-W Dwg.
1 Req. Per
from sheet aluminum. Over-
Wooldridge
50401451
Ass'y.
all dimensions 2.125 in. lg x
(1/Sys. )
1.875 in. wide x 0.187 in.
high. Blackened.
121
BREATHER PLUG Assembly.
MP10232
Ramo-
R-W Dwg.
1 Req. Per
Made from hexagonal bar
Wooldridge
50401452-1
Complete
aluminum. Over-all dimen-
Ass!y.
sions 0.625 in. across flats
(1/Sys.)
x 1.00 in. lg. With 0.125-in.-
thick hexagonal flange, and
remaining length 0. 311 in.
dia, with 5/16-24 NF 2 thread
,
Flanged end drilled 0.140 in.
dia to depth of 0.096 in. and
counter-drilled 0.218 in. dia
to depth of 0.064 in., with a
0.062-in. -dia hole drilled
through axis of plug. Washer,
filter, and 0-ring staked in
flanged end to provide water-
tight seal.
122
HOUSING ASSEMBLY. Cast
MP10650
Ramo-
R-W Dwg.
1 Req. Per
from magnesium. Over-all
Wooldridge
50401002
Complete
dimensions 15.25 in. lg x 12.00
Ass 'Y-
in. wide x 1. 875 in. high. Con-
(1/Sys.)
sists of a spider-frame, drilled
and tapped mounting holes,
press-fit bushing, cable Karnes
and the following replacaved
or Relea
1999/09/08 : CI
RDP81B0087
0200040001-0
parts:
t
1
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
I 2 3 4
5 6
SHEET 18
SHEETS
PARTS DATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
123
BRACKET, Plug. Made
MP10005
Ramo-
R-W Dwg.
1 Req. Per
from sheet steel. Over-all
Wooldridge
50401369
Ass'y.
dimensions 2.217 in. lg x .
(1/Sys.)
0.452 in wide x 0.560 in.
high, with two 0.128-in. -dia
holes and two 0.125-in. -dia
countersunk holes. Black-
ened.
124
BRACKET, Plug. Made
MP10006
RamO-
R-W Dwg.
1 Req. Per
from sheet steel. Over-all
Wooldridge
50401370
Ass'y.
dimensions 1.186 in. lg x
(1/Sys.)
0.452 in. wide x 0.560 in.
high, with two 0.128-in. -dia
holes, and two 0.125-in. -di
.countersunk holes. Black-
ened.
125
COVER, Plug. Made from
MP10007
Ramo-
R-W Dwg.
1 Req. 'Per
sheet aluminum. Over-all
Wooldridge
50401371
Ass'y.
dimensions 2,69 in. lg x
(1/Sys.)
1.13 in. wide x 0.56 in. high
with two 0.128-in. -dia hole
Blackened.
126
COVER, Plug. Made from
MP10008
Ramo-
R-W Dwg.
1 Req. Per
sheet aluminum. Over-all
Wooldridge
50401372
Ass'y.
dimensions 1.66 in. lg x
(1/Sys.)
1.13 in. wide x 0.56 in. high
with two 0.128.-in. -dia hole
Blackened.
_
Approved
For Relea
e 1999/09/08 CI
-RDP81B00878R
00200
0 001-0
 EQUIPMENT (NOMENCLATURE
NAME OF CONTRACTOR Ramo=Wooldridge Corp CONTRACT R-W Project 5021
I 2
SHEET 19 OF SHEETS
PARTS DATA LIST
8 9
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUOMENT
RECOMMENDED QtAN.
PER E PMENT.
JAN TYPE
127
SPACER, Plug. Made fro
MP10009
Ramo-
R-W Dwg.
4 Req. Per
steel. Over-all dimensions
Wooldridge
50401373
Ass'y.
0.406 in. lg x 0.188 in. dia,
(4/Sys.)
with a 0.089-in. -dia-coun-
tersunk hole drilled and
tapped through axis. Black
ened.
128
CONNECTOR, Printed-Cir-
J703
MP10081
Cannon
DX-2842-100.
1 Req. Per
cuit. Over-all dimensions
Ass'y.
0.470 in. lg x 4.281.in. wid
(1/Sys.)
x 0. 375 in. high. 28 cortacts
129
SCREW, Cover Mounting.
MP10082
Std. part
R-W Dwg.
2 Req. Per
A steel socket-head cap
modified Per
50401480-
Ass 'y.
screw. Over-all dimen-
Ramo-Wool-
-
(12/Sys. )
sions 0.625 in. lg x 0.219
dridge Dwg.
in. dia, with 0. 375 in. of
50401480
length 0.090 in. dia and
.0. Z50 in. of length threaded
6/32. Blackened.
130.
BRACKET, Cable Guide
MP10085
Ramo-
R-W Dwg.
1 Req. Per
Mounting. Made from sheet
Wooldridge
50401506
Ass'y.
aluminum. Over-all dimen
(1/Sys. )
sions 2. 75 in. Ig x 0. 81 in.
wide x 1.12 in. high, with
seven 0.116-in. -dia holes.
Blackened-
131 131
SPACER, Filter. Made fro
. MP10089
Ramo-
R-W Dwg.
Req. Per
hexagonal bar aluminum.
Wooldridge
50401466
Ass 'y.
Over-all dimensions 0. 62
(2/Sys.)
in. lg x 0.250 in. across
Approve
For Relea
e 1999/09/08 : CI
-RDP81BOO878
00200040001-0
 EQUIPMENT NOMENCLATURE pprovedlFor RPIOPasSYSTEM 1999/09/08 - CIA-RDP81R00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W.Project 5021
I 2 3 4
SHEET 20 OF SHEETS
PARTS DATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MEG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
131
SPACER,Filter (Cont'd.)
MP10089
Ramo-
R-W Dwg.
2 Req. Per
flats, with hexagonal end
Wooldridge
50401466
Ass 'y.
drilled 0.089 in. dia to dept
(2/Sys. )
of 0.218 in. and tapped to
depth of 0.156 in., and oppo-
site end 0.111 in. dia thread-
ed for length of 0.248 in.
132
PLATE, Filter Mounting.
MP10090
Ramo-
R-W Dwg.
Req. Per
Made from sheet aluminum.
Wooldridge
50401491
Ass'y.
Over-all dimensions 2.625
(1/Sys. )
in. lg x 1. 37 in. wide x 0.062
in. thick, with one 0.225-in,
dia countersunk hole and two
0.128-in. dia holes.
133
TERMINAL BOARD; Assem
MP10092
Ramo-
R-W Dwg.
1 Req. Per
bly. Made of laminated
Wooldridge
50401471
Complete
phenolic sheet. Over-all
Ass'y.
dimensions 1. 50 in, lg x 1. 0
(1/Sys. )
in, wide x 0.375 in, high,
with two 0,154-in. -dia holes
and 14 terminals.
134..
BRACKET, Receptacle N1aat
MP101O8
Ramo-
R-W Dwg.
Re q. Per
ing (right hand). Made from
Wooldridge
50405016-1
' Ass'y.
sheet aluminum. Over-all
jl~Sys. ),
dimensions 0. 684 in. lg x
0.628 in. high x 0.454 in.
wide, with two 0.256-in. lg
x 0.128-in. wide slotted
mounting holes. Blackened.
Approved
For Relea
e 1999/09/08 CI
-RDP81 B00878R
00M040001-0
 EQUIPMENT (NOMENCLATURE MP10737 OF SYSTEM 1 SHEET 21 OF SHEETS
nnrovPd For RPIPacP 1999109108 - CIA-RnPRIROOR7RR0009000d0001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
I 2 3
CIRCUIT
CONTRACTOR'S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
BRACKET, Receptacle
MP10109
Ramo-
R-W Dwg.
1 Req. Per
Mounting (left hand). Made
Wooldridge'
50405016-2
Ass'y.
from sheet aluminum. Over
(1/Sys. )
all dimensions 0. 684 in. lg
x 0. 721 in. high x 0. 454 in.
wide, with two 0. 256-in. lg
x 0.128-in, wide slotted
PARTS D
mounting holes. Blackened.
RECEPTACLE. Over-all
J701
Winchester I
MRE 7S-G
1 Req. Per
137
dimensions 0. 859 in. lg x
1.219 in. wide x 0. 375 in.
high. 7 contacts.
PLUG. Over-all dimen-
J702
MP62006 I
Winchester I
MRE 21P-G
Ass 'y.
(1/Sys. )
1 Req. Per
138
sions 0. 859 in. lg x 2. 25 in.
wide x 0. 375 in. high. 21
contacts.
:COIL, toroid.wound, plas-
L706
MP40021
Rayco:
01112:
Ass 'y.
(1/Sys. )
1 Req. Pe
139:
tic encapsulated, 1.250 in.
dia x 0. 562 in. thick, 50
millihenries.
RESISTOR, fixed, compos-'
MP20189
Allen
As sly.
RC20GF392,
ition, 3900 ohms, + 5%,
1/2"watt
Bradley
Approved :or Relea
00200040001-0
TA LIST
 EQUIPMENT (NOME NCLATUR pro~p
MP1O7 7 nSA (IA RnPg1B00878R00A200040001 0 SHEET 22
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
PARTS D
I 2 3 4 5 6 7 8
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG. MFG. TYPE OR
OF ITEM STOCK NO.
ITEMS PER
EQUIPMENT
TAPE GUIDE ASSEMBLY. Over MP10013 Ramo- -W Dwg. 1 Req. Per
all dimensions 1.156 in. lg x 0.500 Wooldridge 50401360 Complete
in, dia. Consists of the following Ass'y.
replaceable parts: (1/Sys.)
141 SHAFT, Tape Guide Support. MP10136 Ramo- R-W Dwg. 1 Req. Per
'
y.
Over-all dimensions 1.156 in. Wooldridge 50401361 Ass
lg x 0.250 in. dia. A steel (1/Sys.)
shaft with 0.156 in. wide
flange located 0. 375 in. from
one end. 0. 375 in. length is
0.112 in. in dia threaded 4-40
NC-2. Other end of shaft is
0.1885 in. in dia with groove
0.017 in. wide x 0.0067 in.
deep located 0.148 in. from
end. End is slotted across
diameter 0. 046 in. wide x
0.062 in. deep.
ROLLER, Tape Guide. Over- MP10182 Ramo- R-W Dwg. 1 Req. Per
'
2
Ass
y.
all dimensions 0.377. in. 19 Wooldridge 50401347-
)
x 0. 500 in. dia. Ateflon (1/ Sys.
cylinder, with 0. 057 in. wide
flanges on both ends. Centel
section of cylinder 0. 375 in.
dia. 0.1895-in.-dia hole
drilled through axis.
WASHER, Flat. Over-all MP10215 Ramo- R-W Dwg. 1 Req. Per
dimensions 0.312 in, dia x Wooldridge 50401345-1 Ass'y.
0.020 in, thick. A steel {l/Sys.)
washer with a hole 0.196 in.
in dia.
Approved For Relea 1999109/08: CI RDP81B00878R 0200040001-0
RECOMMENDED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
emok=
NAME OF CONTRACTOR Ram - oo dri ge orp CONTRACT
ITEM NO.ICOMPLETE DESCRIPTION OF ITEM
144
WASHER, Flat. Over-all
dimensions 0. 375 in. dia x
0.047 in. thick. A laminated
brass washer with a hole
0.193 in. in dia.
CIRCUIT
SYMBOL
CONTRACTOR'S ACTUAL MFG.
STOCK NO. OF ITEM
MP10202
Ramo-
Wooldridge
MFG. TYPE OR
STOCK NO.
R-W Dwg.
50401485-2
00200040001-0
ApprovedlFor Releale 1999/09/08 : CIA-RDP81B00878Rj
ITEMS PER
EQUIPMENT
2 Req. Per
Ass'y.
(2/Sys.)
SHEET 23
SHEETS
PARTS DATA LIST
RECOMMENDED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURE)
NAME OF CONTRACTOR Ram o- oo ri ge orp C ro3ect
COMPLETE DESCRIPTION OF ITEM
SUPPLY REEL DRIVE ASSEMBLY
Over-all dimensions (excluding
electrical filter) 3. 50 in. lg x
2. 17 in. wide x 1. 80 in. high.
Consists of an electrical filter,
motor, gear box, gear train, and
gear-locking device. This is a
precision assembly, and only the
following parts are replaceable:
146 BRACKET, Spring Retaining.
Over-all dimensions 0. 548
in. lg x 0.190 in. wide x
0.250 in. high. An L-shaped
bracket made from 0.032 in.
sheet steel, two 0.122 in. dial
holes drilled through one
face, and one 0.038 in. dia
hole drilled through other
face. Blackened.
147 BRACKET, Adjusting Screw
Mounting. Over-all dimen-
sions 0. 520 in. lg x 0.407 in.
wide x 0.500 in. high. An L-
shaped aluminum bracket,
two 0.101 in. dia holes drilled
through base, one 0. 0204 in.
dia hole drilled 0.188 in.
deep and tapped 2-56 NC-2.
Blackened. Bracket includes
0.146 in. dia nylon bushing.
148 PIN, Guide. Over-all dimen
sions 0.440 in. lg x 0.1875
in. ?dia. A cylindrical steel
Approve
CIRCUIT
CONTRAC
TORS
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
SYMBOL
STOCK N
O.
OF ITEM
STOCK NO.
EQUIPMENT
Include s
MP101
84
Ramo-
R-W Dwg.
1 Req. Per
B 701
Wooldridge
50401234-1
Complete
and
Ass'y.
Z701
(1/Sys. )
MP10167
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50401423-1
As s'y.
(1/Sys. )
MP10305
Ramo-
Wooldridge
R-W Dwg.
50401430-1
R-W Dwg.
50401243
*e 1999/09/08 : CI lk-RDP81 B00 000200040001-0
1 Req. Per
Ass 'y.
(1/Sys. )
1 Req. Per
Ass 'y.
(2/Sys.)
SHEET 24 OF SHEETS
PARTS DATA LIST
RECOMMENDED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ramo-Wooldridge CorpCONTRACT
COMPLETE DESCRIPTION OF ITEM
PIN, Guide (Cont'd. )
pin with 0.060 in. wide hexa-
gonal flange located 0. 300 in.
from one end, 0. 300 in. end
is 0. 086 in. in dia, threaded
2-56 NC-2. Other end is
0.062 in. in dia, with groove
0.014 in. wide and 0.004 in.
deep. Blackened.
149 ' I BRACKET, Supply Reel
Drive Mounting. A skewed
bracket made from magne-
sium. Over-all dimensions
1.437 in. lg x 1.312 in. wide
x 0. 633 in. high. Blackened.
SPRING, Supply Reel Drive.
A coil spring consisting of
13.5 coils of 0.014 in. dia
music wire. Over-all dimen1
sions 0.532 in. lg x 0.160 in.
dia. Blackened.
151 TAKEUP REEL DRIVE ASSEM-
BLY. Over-all dimensions (ex-
cluding electrical filter) 3.50 in.
lg x 2.17 in. wide x 1.80 in. high.
Consists of an electrical filter,
motor, gear box, gear train, and
a gear-locking device. This is-a
precision assembly and only the
following parts are replaceable:
Appfove
ACTUAL MFG.
OF ITEM
3 4 5 6
CIRCUIT
SYMBOL
eludes
B702
and
Z702
I For Rele4
CONTRACTOR'S
STOCK NO.
se 1999/09/08 : C
Ramo-
Wooldridge
Ramo-
Wooldridge
Ramo-
Wooldridge
Ramo
R-W Project 5021
Wooldridge
IA-RDP81B00878
MFG. TYPE OR ITEMS PER
STOCK NO. EQUIPMENT
R-W Dwg. 1 Req. Per
50401243 Ass'Y-
(Z/Sys.)
R-W Dwg. 1 Req. Per
50401308 Ass'y.
(1/Sys.)
R-W Dwg. 1 Req. Per
50401307 , Ass'y.
R-W Dwg.
504012'34-2
;000040001-0
(2/Sys.)
1 Req. Per
Complete I
Ass 'y-
(1/Sys.)
PARTS DATA LIST
8 9
RECOMMENDED QUAN.
PER EQUIPMENT
SHEET 25 OF SHEETS.
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ramo-Woo ridge orpCONTRACT R- ro~ect
1 2 3 4 5 6
153
154
COMPLETE DESCRIPTION OF ITEM
BRACKET, Spring Retaining
Over-all dimensions 0. 548
in. lg x 0.190 in. wide x
0.250 in. high. An L-shape
bracket made from 0.032 in.
sheet steel, two 0.122 in. di
holes drilled through one
face, and one 0. 038 in. dia
hole drilled through other
face. Blackened.
BRACKET, Adjusting Screw
Mounting. Over-all dimen-
sions 0.520 in. lg x 0.407 in
wide x 0. 500 in. high. An L
shaped aluminum bracket,
two 0. 101 in. dia holes drill-
ed through base, one 0.0204
in. dia hole drilled 0. 188 in.
deep and tapped 2-56 NC-2.
Blackened. Bracket include
0.146 in. dia nylon bushing.
PIN, Guide. Over -all dime
sions 0.440 in. lg x 0.1875
in. dia. A cylindrical steel
pin with 0.060 in. wide hex
agonal flange located 0. 300
in, from one end, 0. 300 in.
end is 0.086 in, in dia,
threaded 2-56 NC-2. Other
end is 0.062 in. in dia, with
groove 0.014 in. wide and
0.004 in. deep. Blackened.
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
MP10170
MP10305
ACTUAL MFG. I MFG. TYPE OR I ITEMS PER
OF ITEM STOCK NO. J EQUIPMENT
Ramo- R-W Dwg. 1 Req. Per
Wooldridge 50401423-2 Ass'y.
(l/Sys. )
Ramo- R-W Dwg. 1 Req. Per
Wooldridge 50401430-2 Ass'y.
(1/Sys.)
Ramo- R-W Dwg.
Wooldridge 50401243
Approved For Relea 1999/09/08 : CI RDP81B00878R 00200040001-0
SHEET 26
PARTS
RECOMMENDED QUAN.
PER EQUIPMENT
SHEETS
LIST
 EQUIPMENT (N OMEN CLATURA~pro ?&IZIeeS1t97UDO&: CIA-RDP8.1B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT
2 3
R-W Project 5021
4 5
SHEET 27 OF SHEETS
PARTS D
TA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
155
BRACKET, Takeup Reel
MP10004
Ramo-
R-W Dwg.
1 Req. Per
Drive Mounting. A skewed
Wooldridge
50401309
Ass'y.
bracket made from magne-
(l/Sys. )
sium. Over-all dimensions
1. 00 in. lg x 1. 312 in. wide
x 0. 633 in. high. Blacken
156
SPRING, Takeup Reel Drive
MP10045
Ramo-
R-W Dwg.
A coil spring consisting of
Wooldridge
50401307
13. 5 coils of 0. 014 in. dia
music wire. Over-all di-
mensions of 0. 532 in. lg x
0.160 in. dia. Blackened.
157
FILTER, Electrical. Over
Z701
MP68305
Sprague
R-W Dwg.
1 Req. Per
all dimensions 1.844 in. lg
or
NJ711 (Mod-
50401259-
' Ass'y.
x 1. 718 in. wide x 0. 812 in.
Z702
ified per R -V
)
high. A sealed radio noise
Dwg. 5090125
filter with two solder-lug
terminals, and with two
shielded leads 3.12 in. 1g.
Approved
For Relea
a 1999109108: CI
RDP81BOO878R
00200040001-0
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR namo-vwooiariage Vorp CONTRACT
COMPLETE DESCRIPTION OF ITEM
R-W Project 5021
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
158 HEAD AND HEAD COVER ASSEM
BLY. Over-all dimensions 4. 87
in. lg x 2., 50 in. wide x 1. 75 in.
high. Consists of the following
replaceable parts and assemblies:
MP10087 Ramo- R-W Dwg. 1 Req. Per
Wooldridge 50401317 Complete {
Ass 'y.
(1/Sys. )
MAGNETIC HEAD AND MP10040 Ramo- R-W Dwg. 1 Req. Per
MOUNTING PLATE, Assem Wooldridge 50401325-1 Ass'y.
bly (erase). Over-all dimen- (1/Sys.)
sions 1.250 in. lg x 1.125 in.
wide x 0. 573 in. high, with
two 12-in, color-coded leads.
160 MAGNETIC HEAD AND
MOUNTING PLATE Assem-
bly (record). Over-all di-
mensions 1. 250 in. lg x 1.125
in. wide x 0.470 in. high,
with six 12-in. color-coded
leads.
MP10038 Ramo- R-W Dwg. 1 Req. Per
Wooldridge 50401325-2 Ass'y.
(1/Sys.)
161, MAGNETIC HEAD AND MP10020 Ramo- R-W Dwg. 1 Req. Per
MOUNTING PLATE Assem- Wooldridge 50401325-3 Ass 'y.
bly (playback). Over-all (1/Sys.)
dimensions 1.250 in. lg x
1. 125 in. wide x 0. 547 in.
high, with six 6-in. micro-
dot cables terminated with
color-coded plugs.
SHEET 28
PARTS
8
OF SHEETS
LIST
9
JAN TYPE
162 HEAD SHIELD Assembly. MP10021 Ramo- R-W Dwg. 3 Req. Per
Formed from sheet metal. Wooldridge 50401327 Ass 'y.
Over-all dimensions 0.862 (3/Sys.)
in. lg x 0.60 in. wide x 0.646
in. high, with two 0-80, 0.250
in. filister head screWoprove For Relea e 1999/09/08 : CI -RDP81B00878R 040001-0
CIRCUIT CONTRACTOR'S
SYMBOL STOCK NO.
 EQUIPMENT (N0MENCLATUR6PProv fir,?Ibse5 yVfi 1: CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
I 2
3 4 5 6
SHEET 29 OF SHEETS
PARTS D
ATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
163
HEAD COVER Assembly.
MP10018
Ramo-
R-W Dwg.
1 Req. Per
Cast from magnesium. Over
Wooldridge
50401320
Ass'y.
all dimensions 3.727 in. lg
(1/Sys.)
x 0.480 in. wide x 0.831 in.
,high.
164
PLATE, Head Cover Mount-
MP10017
Ramo-
R-W Dwg.
1 Req. Per
ing. Magnesium casting.
Wooldridge
50401318
Ass'y.
Over-all dimensions 4.875
(l/Sys. )
in. Ig x 2.062 in. wide x
0. 50 in. high. Blackened.
165
LEVER ARM AND SHAFT
MP10022
Ramo-
R-W Dwg.
1 Req. Per
Assembly. Consists of a
Wooldridge
50401329
Ass'y.
lever arm, shaft and hub.
-
(1/Sys.)
Over-all dimensions, shaft
and hub 1. 50 in. lg, lever
and hub 1.25 in. lg, hub 0.37
in.. dia x 0. 312 in. high.
166
BLOCK, Lever and-Plunger
MP10028
Ramo-
R-W Dwg.
1 Req. Per
Mounting. Made from bar
Wooldridge.
50401336
Ass 'y.
aluminum. Over-all dimen-
(1/Sys. )
sions 1. 00 in. lg x 0. 969 in,
wide x 0.63 in. high, with
two holes 0.140 in. dia drill-
ed through, one hole 0.126
in. dia drilled through, and
one hole 0.1567 in. dia drill-
edthrough.
167
KNOB, Plunger Shaft. Made
MP10030
Ramo-
R-W Dwg.
1 Req. Per
from bar steel. Over-all
Wooldridge
50401338
Ass'y.
dimensions 0.312 in, x
1$pt
p~ed
For Relea
e 1999/09/08 : CI
-RDP81 BOO878R
00200f""1-0
(1/Sys. )
o
0, 46 in. maximum ~
9
 EQUIPMENT (N OMEN CL ATURF4pprovMMr ikiIgEeSI)J1 81: CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
1 2
169
170
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
is engraved on knob in black
letters.
.end. Chrome plated. "PUL
ITEMS PER
EQUIPMENT
-KNOB, Plunger Shaft (Cont'd)
taper, center drilled to 0. 25
in. depth for 0.125 in. shaft,
two 2-56 tapped holes 900
apart 0.125 in. from narrow
SHAFT, Plunger. Machined
from 0. 250 in. dia steel rod.
Over-all dimensions 1.422
in. lg x 0.203 in. dia, with
0.437 in. of length turned
down to 0.124 in. dia, taper-
ed on end. Adjacent 0. 0125
in. length 0.203 in. dia,
remaining 0. 860 in. length,
turned down to 0.124 in. dia
and undercut to 0.084 in. dia,
0.093 in. from chamfered
Blackened.
SPRING, Plunger. A coil
spring consisting of ten coils
of 0.019-in. -dia music wire.
Over-all dimensions 0. 72 in.
lg x 0.163 in. dia. BlacI d.
NUT, Retaining. Machined
from 0.375 in. hex stock,
aluminum or brass. Over-
all dimensions 0.218 in. lg
x 0. 375 in. between faces.
0.138 in. of length turned
down to 0.250 in. diapved For Relea
threaded 1/4-28 NF-2.
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
6 7
MFG. TYPE OR
STOCK NO.
Ramo- R-W Dwg.
Wooldridge 50401338
Ramo- R-W Dwg.
Wooldridge 50401335
Ramo-
Wooldridge
R-W Dwg.
50401340
1 Req. Per
Ass'y.
(1/Sys. )
1 Req. Per
Ass 'y.
(1/Sys. )
1 Req. Per
Ass'y.
(1/Sys.)
MP10029
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50401337
.Ass't'.
(1/Sys. )
SHEET 30 OF SHEETS
PARTS D
RECOMMENDED QUAN.
PER EQUIPMENT
TA LIST
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1 SHEET 31 OF SHEETS
/1!1/./11!1 /1 A A
n
o
ro
ed F
R
?
0
pp
r
ase 1999109108
.q.~aiva i 1 itm
yv
v
eIv-e
CIA PPP81B00878RO0
2
NAME OF CONTRACTOR Ramo-Wooldridge CorpCONTRACT R-W Project 5021
I 2 3 4
5 6
PARTS DATA LIST
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
CONTRACTOR'S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
NUT, Retaining (Cont'd. )
Ramo-
R-W Dwg.
1 Req. Per
Undercut to 0. 210 in. dia
Wooldridge
50401337
Ass 'y.
0.138 in. from threaded end.
(1/Sys.)
Blackened.
BRACKET, Tape Guide Asserr
Ramo-
R-W Dwg.
1 Req. Per
bly (playback). Formed fro
Wooldridge
50401363
As sly.
bar aluminum. Over-all
(1/Sys.)
dimensions 0. 562 in. lg x
0. 347 in. wide x 0. 500 in.
high, with two 0.130 in. x
0.67 in. mounting slots and
two 0. 062 dia sapphire rods
cemented in place. Black-
ened.
BRACKET, Tape Guide
Assembly (erase). Formed
from bar aluminum. Over-
all dimensions 0. 562 in. lg
x 0.219 in. wide x 0.500 in.
high, with two 0.130 in. x
0.067 in. mounting slots and
two 0. 062-in. -dia sapphire
rods cemented in place.
Blackened.
SUPPORT, Tape Guide Brack-
et. Made from bar aluminurr
Over-all dimensions 0. 656
in. ig x 0.344 in. wide x
.0.203 in. high, with four
0.067-in. -dia holes. Black-
ened.
MP14124
Ramo-
Wooldridge
Ramo-
Wooldridge
R-W Dwg.
50401365
R-W Dwg.
50401362
Approved or Releas~ 1999/09/08: CIAIRDP81B008700040001-0
1.11 .
1
1 Req. Per
As sly.
(1/Sys.)
1 Req. Per
Ass ly-
(1/Sys. )
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ram oo ridge orpCONTRACT roject
I 2
4 5 6
SHEET 32 OF SHEETS
PARTS DATA LIST
8 9
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
174
NAMEPLATE, Cover Indica-
MP10036
Ramo-
R-W Dwg.
1 Req. Per
tor. Made from black plas-
Wooldridge
50401332
Ass'y.
tic laminate. Over-all
(1/Sys.)
dimensions 0. 813 in. lg x
0.625 in. wide x 0.062 in.
thick, with four 0.070-in. -
dia countersunk mounting
holes. Engraved with arrow
and words "CLOSED" and
"OPEN".
175
SPRING, Head Adjusting
MP10033
Ramo-
R-W Dwg.
3 Req. Per
Screw. A coil spring con-
Wooldridge
.50401341
Ass'y.
sisting of six coils of 0. 033-
(3/Sys.)
in. -dia music wire. Over-
all dimensions 0.444 in. lg
x 0.187 in. dia. Blackened.
176
PLATE, Guide. Made from
MP10031
Ramo-
R-W Dwg.
I Req. Per
sheet steel. Over-all dimen
Wooldridge
50401339
Ass'y,
sions 1.125 in., lg x 0.375 in.
(1/Sys.)
wide x 0.030 in, thick. Two
0.1259-in. -dia holes and
0.250 in. x 0.1259 in. slot
drilled through centerline.
Blackened.
177
LINK, Cover Shaft. Made
MP10023
Ramo-
R-W Dwg.
1 Req. Per
from bar steel. Rounded on
Wooldridge
50401331
Ass'y.
one end and forked on the
(1/Sys. )
other end. Over-all dimen-
sions 1. 374 in. lg x 0. 312 in.
wide x 0.250 in. high. One
hole 0.158 in. dia in one end,
a notch 0.130 in. wide x 0.34
in. deep in the other end.
Two slots 0.276 in. 1g x 0.065
in. wide in forked ei PP
For Relea
e 1999/09/08: CI
-RDP81BOU878R
00200040001-0
ened.
 EQUIPMENT (NOMENCLATUR
F) MP10737 OF SYSTEM 1
pproved For Release 1999109108 . CIA-RQPRIROO878R000200040001-0
NAME OF CONTRACTOR Ramoo-Wooldridge Corp CONTRACT R-W Project 5021
I 2
3 4 5 6
SHEET 33 nF SHEETS
PARTS D
TA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
178
SHAFT, Shield Cover.
MP10026
Ramo-
R-W Dwg.
1 Req. Per
Machined from steel rod.
Wooldridge
50401334
Ass'y.
Over-all dimensions 2.250
(1/Sys. )
in. ig x 0.188 in, dia. One
end flatted to 0. 124 in, thick
x 0. 312 in, lg with 0.0620-
in. -dia hole drilled 0. 125 in.
from end, and 0.093-in. -dia
hole drilled through 0. 221 in.
from opposite end. Both
ends chamfered. Blackened.
179
PIN, Cover Shaft. Machined
MP10025
Ramo-
R-W Dwg.
1 Req. Per
from steel rod. Over-all
Wooldridge
50401333
Ass'y.
dimensions 0. 343 in, lg x
(1/Sys. )
0.125 in, dia. 0.031 in, of
length is 0.125 in, dia. Re-
maining length is 0. 0620 in.
dia, chamfered at end, and
undercut to 0.053 in, dia
0.012 in, from chamfered
end. Blackened.
180
COAXIAL Connector Assem-
MP10107
Ramo-
R-W Dwg.
1 Req. Per
bly. Over-all dimensions
Wooldridge
50401514
Ass'y.
1. 670 in, lg x 0. 937 in, wide
(1(Sys. )
x 0. 562 in, high. Consists
of a bracket made from
sheet aluminum, and six
mounted coax adapters.
Bracket is blackened, and
jacks are color coded.
Approved
For Relea
e 1999/09/08 : CI
-RDP81 B00878R
002dRIN-0
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ram - Molt ri ge rpCONTRACT rojec
I 2
SHEET 34 OF SHEETS
PARTS D
ATA LIST
9
3 4 5 6 7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
181
LOOP ARM ASSEMBLY :(supply
MP10041
Ramo-
R-W Dwg.
1 Req. Per
reel). Over-all dimensions 4.06
Wooldridge
50401229-1
Complete
in. lg x 1.750 in. wide x 1.938 in.
Ass'y.
high.
(1/Sys.)
182
LOOP ARM ASSEMBLY (takeup
MP10046
Ramo-
R-W Dwg.
1 Req. Per
reel). Over-all dimensions 4.06
Wooldridge
50401229-2
Complete
in. lg x 1. 750 in. wide x 1. 938 in.
Ass 'y.
high.
(1/Sys.)
The LOOP ARM ASSEMBLIES
consist of the following replace-
able parts and assemblies:
183
SHAFT, Loop Arm Roller.
MP10126
Ramo-
R-W Dwg.
1 Req. Per
Over-all dimensions 0.625
Wooldridge,
50401227
Ass'y.
in. lg x 0.25 in. dia. A
(2/Sys.)
steel shaft with 0. 021 in.
wide flange located 0.146 in.
from one end.- 0.146 in.
length is 0.086 in. in dia
threaded 2-56 NC-2. Other
end of shaft is 0. 093 in. in
dia with groove 0.019 in.
wide x 0.076 in. deep locat-
ed 0.054 in. from end.
184
WASHER, Flat. Over-all
MP10233
Ramo-
R-W Dwg.
2 Req. Per
dimensions 0.250 in. dia x
Wooldridge
50401485-1
Ass'y.
0.047 in. thick. A laminat-
(4/Sys.)
ed brass washer with a hole
0.096 in. in dia.
Approved
or Releas
1999/09/08 : CIA
RDP81BOO878RO
0200040001-0
 EQUIPMENT (N OMENCLATURfkdprovdV?b9 ee@sFe'IMUM ~ CIA-RDP81B00878R000200040001-0 SHEET 35 of SHEETS
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT
I 2
R+W Project 5021
PARTS DATA LIST
3 4 5 6 7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
185
ROLLER, Tape Guide. Over
MP10113
Ramo-
R-W Dwg.
1 Req. Per
all dimensions 0.314 in. lg x
Wooldridge
50401117
Ass'y.
0. 375 in. dia. A teflon cylin
(2/Sys. )
der with 0.031 in. wide
flanges on both ends. Cente
section of cylinder 0. 250 in.
oia. 0.0937-in.-dia hole
drilled through axis.
186
SPRING, Tape Guide (supply
MP10248
Ramo-
R-W Dwg.
1 Req. Per
reel). Formed from 0.010-
Wooldridge
50401524-1
Ass'y.
in. -thick berylium-copper
(1/Sys.)
strip. Over-all dimensions
1.375 in. lg x 0.437 in. wide
x 0. 312 in. high. An S-
shaped spring 0.125 in. wide
with a forked mounting sur-
face. The forked mounting
surface is located near one
end of the spring, and is
perpendicular to the plane
-
of the spring..
187
SPRING, Tape Guide (takeup
MP10242
Ramo-
R-W Dwg.
1 Req. Per
reel). Similar in shape to
Wooldridge
50401524-2
Ass'y.
the supply-reel tape-guide
(1/Sys.)
spring, but has a reversed-'
S configuration.
188
ARM, Loop. Formed from
MP10115
Ramo-
R-W Dwg.
1 Req.. Per
sheet magnesium. Over-all
Wooldridge
50401118
Ass'y.
dimensions 2. 563 in. lg x
(2/Sys.)
.0.375 in. wide x 0.156 in.
high, with one 0. 12 0 - in. - dia
hole drilled through center-
line 0.500 in. from one end,
exam
and one 0.093-in. -dApgE}16ed
For Relea
e 1999/09/08 CI
RDP81BOO878R
00200040001-0
drilled through centerline
fl 122 in fnnm nnnnaito and
 EQUIPMENT (NOMENCLATURE MP10737 OF SYSTEM 1
pproved For Release 1999/09/08 CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
1 2 3 4
SHEET 36 OF SHEETS
PARTS DATA LIST
5 6 7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
189
LOOP ARM SHAFT AND
MLP10243
Ramo-
R-W Dwg.
1 Req. Per
CONTACT ARM Assembly.
Wooldridge
50401229
Ass'y.
Over-all dimensions 1.50 in.
(2/Sys.)
lg x 1.390 in. wide x 0.437
in. high. Consists of two
parts which may be separat-
ed by removing a roll pin.
If it becomes necessary to
replace either of the parts,
both parts must be replaced.
The loop arm shaft is 1. 390
in. 1g, one end threaded 4-4
NC-2, adjacent 0.115 in. of
shaft length flanged 0. 437 in.
dia, with remaining length
of shaft 0.128 in. dia under-
cut to 0.120 in. dia for length
of 0.632 in. The contact
arm is 1.50 in. lgx0.25in.
wide x 0.069 in. thick with
0.055-in. -thick cylindrical
spacer mounted at the center
of the arm. 0..1285-in. -dia
hole through center of space
and arm, two 0.144-in. -dia
holes and one 0.031-in. -dia
hole in one end of arm, and
two 0. 098-in. -dia holes in
other end of arm.
190
BEARING AND SPACER.
MP10201
Ramo-
R-W Dwg.
1 Req. Per
Made from aluminum bronze
Wooldridge
50401231
Ass'y.
Over-all dimensions 0.935 i
.
(2/Sys.)
lg x 0.937 in. dia. A flange
cylinder with axial hole 0.12
in. in dia. Flange is 0.126
in. thick x 0.937 in. dia,
located 0.125 in. from cham
fered end of cylinderQp ed
For Relea
e 1999109108: CI
-RDP81BOO878R
00200040001-0
 EQUIPMENT (N O M E N C L ATU R )proved FolrOReleasse 1999/09/08 1CIA-RDDP81 B00878R
NAME OF CONTRACTOR Ramon-Wooldridge Corp CONTRACT R-W Project 5021
6
SHEET 37 OF SHEETS
PARTS D
TA LIST
9
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
190
BEARING AND SPACER
(Cont'd.)
MP10201
amo-
R-W Dwg.
1 Req. Per
five tapped holes. Cylinder
Wooldridge
50401231
Ass'y.
is 0.245 in. dia undercut to
(2/Sys.)
0.218 in. dia in three places:
both sides of flange, and 0. 64
in. from flange.
191
NUT, Anchor. Over-all
MP10246
Elastic Stop
22NA7-68-6
1 Req. Per,
dimensions 0.859 in. lg x
Nut Corp. of
Ass'y.
0.438 in. wide x 0.469 in.
America
(2/Sys.)
high. 6-32 stop nut with
right-angle bracket. Brack-
et has two 0. 098-in. -dia
holes for mounting.
192
SMALL GEAR Assembly.
MP10137
Boston Gear
R-W Dwg.
1 Req. Per
Consists of a gear and pin.
#3216 or
50401310
Ass'y.
Over-all dimensions 0.130
American
(2/Sys.)
in. lg x 0. 562 in. dia.
Stock Gear
#S3216 (Mod-
ified Per R-
Dwg. 50401123)
193
SPRING, Counterbalance
MP10136
Ramo-
R-W Dwg.
1 Req. Per
(supply reel). A right-hand-
Wooldridge
50401121-1
Ass'y.
wound coil spring consisting
(1/Sys. )
of 23.5 coils of 0.025 in. dia
music wire. Over-all dimen
-
sions 0. 700 in. ig x 0.343 in
dia. Blackened.
Approved
or Releas
1999/09/08 : CIA
RDP81B00878R
0200040001-0
 EQUIPMENT (NOMENCLATURE prov PFbOr7R~~le~ e 9 181 CIA-RDP81B00878R000200040001-0 SHEET 38 OF S BEETS
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
1 2 3 4 5 6
PARTS DATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
194
SPRING, Counterbalance
MP10138
Ramo-
R-W Dwg.
1 Req, Per
(takeup reel). A left-hand-
Wooldridge
50401121-2
Ass'y.
wound coil spring consisting
(1/Sys.)
of 23. 5 coils of 0. 025 in. di
music wire. Over-all dime
-
sions 0.700 in. lg x 0.343 in
dia. Blackened.
195
STRIP, Contact. Made fro
MP10123
Ramo-
R-W Dwg.
1 Req. Per,
phosphor bronze sheet. Over
.
Wooldridge
50401134
Ass'y.
all dimensions 0.875 in. lg
(2/Sys.)
x 0.250 in. wide x 0.020 in.
thick, with two holes 0.070
in. dia. Silver plated.
196
STRIP, Insulation. Made
MP10122
Ramo-
R-W Dwg.
1 Req. Per
from nylon laminated pheno-
Wooldridge
50401133
Ass'y.
lic sheet. Over-all dimen-
(2/Sys.)
sions 0. 875 in. lg x 0. 250
in, wide x 0. 031 in. thick,
with two holes. 0.070 in. dia.
.
197
BUSHING, Insulating. Made
MP10198
Ramo-
R-W Dwg.
4 Req. Per
from laminated plastic rod.
Wooldridge
50401132
Ass'y.
Over-all dimensions 0.062
(2/Sys.)
in. lg x 0.140 in. dia. One
hole 0.067 in. dia drilled
through center.
198
PAD, Insulating. Made fro
MP10121
Ramo-
R-W Dwg.
1 Req. Per
nylon laminated phenolic
Wooldridge
50401131
Ass 'y.
sheet. Over-all dimensions
(2/Sys. )
0.437 in. lg x 0.250 in. wide
x 0.015 in. thick, with two
0.070-in. -dia holes.
4nn
Approved
or-Relea
1999/09/08 Cl
RDP81B00878R
00200040001-0
 EQUIPMENT (NO MEN CLATUfJD4rove PF3-1"6AF1,%Ygi:1CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
SHEET 39 OF SHEETS
PARTS DATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
199
BRACKET AND BUSHING
MP10120
Ramo-
R-W Dwg.
1 Req. Per
Assembly. Made from bras
Wooldridge
5040U28
Ass'y.
bar. Over-all dimensions
(2/Sys.)
0.438 in. lg x 0.490 in.
wide. Consists of a U-shap
ed bracket and cylindrical
bushing. Silver plated.
200
BRUSH, Loop Arm. A car-
MP10043
Fletcher
R-W Dwg.
1. Req. Pe
bon and 75% metal composi-
Electrical
50401226
Ass'y.
tion electrical brush. Over
Specialty Co.
(2/Sys.)
all dimensions 0.210 in. lg
or Equivalent
x0.093 in. dia.
PerR-WDw
50401226
201
SPRING Assembly. Over-
MP10132
Ramo-
R-W Dwg.
1 Req. Per
all dimensions 0.436 in. lg
Wooldridge
50401484
y
.
Ass'
x0.397 in. widex0.188in.
(2/Sys
.
)
high. A shoulder screw and
spring assembly. The slot-
ted head of the screw is
0.188 in. dia, . shoulder is
0.084 in. dia, and screw is
0. 060 in. dia threaded 0-80
NF-2. The spring has three
coils with one end fixed to
the head of the screw, and
the other end extending 0.34
in. tangentially from the
screw.
202
CONTACT AND LEAF
MP10125
Ramo-
R-W Dwg.
L Rec. Pe
SPRING Assembly. A T-
Wooldridge
50401232
Ass. Y.
shaped leaf spring made
from beryllium copper
sheet. Over-all dimensions
1.19 in. lg x 0.50 iRIpg $6d
or Releas
1999/09/08 CIA-
DP81B00878RO
0240001-0
x 0.015 in. thick, with two
2 3
 E UIPMENT (NOMENCLATURE MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ramo=Wooed
I 2
ridge C
5 6
SHEET 40 of SHEETS
PARTS D
ATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
202
CONTACT AND LEAF
SPRING Assembly. (Cont'd..)
MP10125
amo-
R-W Dwg.
1 Req. Per
holes 0.140 in. dia, and with
Wooldridge
50401232
Complete
a contact of coin-silver.
Ass'y.
(2/Sys.)
203
STANDOFF. Made from
MPIO118
amo.-
R-W Dwg.
1 Req. Per
nylon laminated phenolic
Wooldridge
50401224
Ass'y.
sheet. Over-all dimensions
(2/Sys.)
0. 840 in. lg x 0. 500 in. wide
x 0.250 in. thick, with two
holes 0.089 in. dia drilled
through and tapped 4-40 NC
204
LARGE GEAR Assembly.
MP10117
Boston Gear
R-W Dwg.
1 Req. Per
Consists of a gear, shaft,
#3226 or Am-
50401184_
Ass'y.
and pin. Over-all dimen-
erican Stock
(2/Sys. )
sions 0. 510 in. lg x 0. 875 in.
Gear #53226
dia.
(Modified Pe"
R-W Dwg.
50401124)
205
SPACER. Made from alum-
MP10244
amo-
R-W Dwg.
1 Req. Per
inum. Cylindrical shape.
Wooldridge
50401125
Ass'y.
Over-all dimensions 0.063
(2/Sys.)
in. lg x 0.170 in. dia. One
hole 0. 093 in. dia drilled
through center of spacer.
Blackened.
206
BASEPLATE. Machined
MP10127.
Ramo-
R-W Dwg.
l.Req. Per
from plate magnesium.
Wooldridge
50401228
As s'y.
Over-.all dimensions 4.062
(2/Sys.)
in. lg x 1.375 in. wide x
0. 250 in. high, with 0. 312 in
of length on either end.mill-
now
ed down to 0.126 in. wed
or Releas
1999/09/08: CIA
RDP81B00878R
0200040001-0
9108 ?l.IA-RnPRIRnnRTRRnnn2nnnannnl-n
orp CONTRACT R-W Project 5021
 EQUIPMENT (NOMENCLATLI R&~provedl WWOeOFe9 R81: CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR
with two holes 0.089 in. dia
drilledand tapped 4-40 NC-2
NTRACT
SHEET 41 OF SHEETS
PARTS DATA LIST
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
CONTRACTORS
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
BASEPLATE (Cont'd. )
MP1012 7
Ramo-
R-W Dwg.
1 Req. Per
and drilled and tapped for
Wooldridge
50401228
Ass 'y.
mounting.
(2/Sys.)
-NUT, Plate. Made from
Ramo-
R-W Dwg.
1 Req. Per
magnesium strip. Over-all
Wooldridge
50401311
Ass'y.
dimensions 1.03 in. lg x 0.2
(2/Sys.)
in. wide x 0.125 in. thick,
BOARD, Mounting. Made
from magnesium. Over-all
dimensions 1. 900 in. lg x
1. 380 in. wide x 0.062 in.
thick. One end of board is
1. 380 in. wide with two slots
0. 500 in. lg x 0. 064 in. wide,
two holes' 0.128 in. dia and
countersunk, and two holes
0. 096 in. dia and counter-
sunk. The opposite end is
0. 660 in. wide with one hole
. 0.140 in. dia, and two holes
0.059 in. dia tapped 1-72
NF-2. Blackened.
SPACER. Made from a
brass rod. Over-all dimen-
sions 0.078 in. lg x 0.150 in.
dia. One hole 0.081 in. dia
drilled through the center of
spacer. Blackened.
Ramo-Wooldridge Corp CO
Approved
R-W Project 5021
Ramo-
Wooldridge
R-W Dwg.
50401312
Ramo-
Wooldridge
R-W Dwg.
50401315
1999/09/08 : C1A1RDP81 B00878R01)0200040001-0
1 Req. Per
Ass 'y.
(2/Sys.)
2 Req. Per
Ass't'.
(4/Sys.)
 EQUIPMENT (NOMENCLATURE pproM F-o 31 eQ seSYtAl1U9T08: CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT
I 2
212
BOARD, Commutator. Made
from glass cloth thermoset-
ting laminated phenolic
sheet, copper laminated on.
one side. Over-all dimen-
sions 1. 39 in. lg x 1. 25 in.
wide x 0.066 in. thick, with
15 terminals.
BLOCK, Resistor. Made
from magnesium. Rectang-
ular block. Over-all dimen
sions 1. 370 in. lg x 1. 080 in.
wide x 0. 740 in. high. Bloc
is 0. 920 in. wide with 15
-holes 0.234 in. dia drilled
through. Two holes in one
end of block 0. 089 in. dia
tapped 4-40 NC-2 and coun-
tersunk. Two mounting feet
each 0. 280 in. lg x 0. 078 in.
wide x 0.210 in. high with
one 0.106-in. -dia hole in
each. Blackened.
RESISTOR, fixed, compos-
ition, 22 ohms, + 5%, 1 watt
Same as R833
R-W Project 5021
SHEET 42 OF SHEETS
PARTS DATA LIST
3 4 5 6 7 8
CIRCUIT
CONTRACTOR'S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
MP10185
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50401314
As s'y.
(2/Sys.)
R833
hrough
R845
Ramo-
Wooldridge
Allen-
Bradley
R-W Dwg.
50401313
1, Req. Pe
Ass 'y.
(2/Sys.)
R846
through
R858
13 Req. Per
Ass'y..
(26/Sys.)
Approved For Releage 1999/09/08 : CI) RDP81B00878Rq
 EQUIPMENT (NOMENCLATUR MP10737 OF SYSTEM 1 CIA
NAME OF CONTRACTOR Ramo-Wooldridge CorpCONTRACT R-W Project 5021
SHEET 43 OF SHEETS
PARTS D
1 2 3 4 5 6 7 8
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
CONTRACTOR'S J
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
MP10134
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50401002
Complete
As s'y.
(1/Sys.)
MP10066
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50401415
Ass'y.
(1/Sys.)
214 JAM ROLLER ASSEMBLY.
Over-all dimensions 1. 83 in. lg
x 1.00 in. wide x 1.54 in. high.
Consists of the following replace-
able parts:
ATA LIST
215 SHAFT, Roller. Made from
steel. Over-all dimensions
1.06 in. lg x 0.37 in. dia,
with one end 0.37 in. in dia
for a length of 0.293 in.,
remainder of the ehaft is
0.667 in. lg x 0.250 in. dia
with a groove 0.031 in. wide
x 0.0092 izi. deep x 0.031 in.
from one end, and with two
intersecting 0.06 in. dia
holes at the opposite end,
one hole drilled axially to a
depth of 0.75 in. , and the
other hole drilled through
diametrically 0.75 in. from
the end. Chrome. plated.
216 ROLLER, Jam. Made from MP10065 Ramo- R-W Dwg. 1 Req. Per
an aluminum cylinder with a Wooldridge 50401412 Ass 'y.
molded rubber rim. Over- (1/Sys. )
all dimensions 0.500 in. lg
x 1.000 in. dia, with, one
hole 0.251 in. dia through
axis of cylinder.
aw~
Approved or Releas 1999/09/08 : CIA RDP81B00878R 0200040001-0
 EQUIPMENT (N OMEN CL ATUR11~proveM or 37 Oe 1999109108 ICIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge CorpCONTRACT
I 2
R-W Project 5021
SHEET 44 OF SHEETS
PARTS DATA LIST
3 4 5 6 7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
217
SHAFT, Roller Arm. Made
MP10064
Ramo-
R-W Dwg.
1 Req. Per
from steel. Over-all dimen-
Wooldridge
50401411
Ass'y.
sions 1.540 in. lg x 0.500 in.
(1/Sys. )
dia, with a 0.06 in. wide x
0.500 in. dia. flange at one
end of shaft, remainder of
shaft is 0. 2515 in. dia for a
length of 1148 in., 0. 187 in.
dia for a length of 0. 080 in.
and opposite end of shaft is
0.138 in. dia, threaded #6-32
NC-2 for a minimum length
of 0.218 in. Flange of shaft
is chrome plated and shaft is
blackened.
218
ARM, Roller. Made from
MP10062
Ramo-
R-W Dwg.
1 Req. Per
sheet steel and bar steel.
Wooldridge
50401406
Ass'y.
Over-all dimensions 1. 500 in.
(1/Sys.)
lg x 0.500 in. wide x 0.625
in. high, U-shaped with one
hole 0. 375 in. dia drilled
through, one hole 0.219 in.
dia drilled through, and one
elliptical hole 0. 245 in. lg x
0.120 in. wide. Blackened.
219
SPRING, Load. A coil spring
MP10056
Ramo- .
R-W Dwg.
1 Req. Per
consisting of 10 coils of 0.026
Wooldridge
50401439
Ass'y.
in. dia music wire. Over-all
(1/Sys. )
dimensions 0.695 in. lg x
0.226 in. dia. Blackened.
?
Approved
or Releas
1999/09/08 CIA
DP81B00878R0
0200040001-0
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ramo oo ri ge orp CONTRACT R-W
1 2
Project
6 7
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAI. MEG.
OF ITEM
MEG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
220
BRACKET, Load Spring.
MP10054
Ramo-
R-W Dwg.
Req. Per
Made from sheet steel. Over
-
Wooldridge
50401440
Ass'y.
all dimensions 0. 591 in, lg
(1/Sys.)
x 0.444 in. wide x 0.062 in.
.thick, V-Shaped bracket,
rounded on one end to a
radius of 0.093 in., with one
hole 0.062 in. dia drilled
through, opposite end round-
ed to a radius of 0.150 in.
with one hole 0.144 in. dia
drilled through.. Blackened.
221
SPACER, LoadSpring Bracket.
MP10055
Ramo-
R-W Dwg.
1 Req. Per
Made from aluminum, Over
Wooldridge
50401441
Ass'y.
all dimensions 0.406 in. lg x
(1/Sys. )
0. 312 in. dia, with a hole
0.144 in. dia drilled through
axis of spacer. Blackened.
222
ARM, Load Spring. Made
MP10063
Ramo-
R-9 Dwg.
1 Req. Per
from sheet steel, Over-all
Wooldridge
50401410
Ass'y.
dimensions 0. 905 in. lg x
(1/Sys.)
0.374 in. wide x 0.062 in.
thick, V-shaped with one end
rounded to a radius of 0.187
in., and with a slotted hcle
0.1875 in. lg x 0.145 in.
wide, opposite end rounded
to a radius of 0.093 in.,
with a hole 0.093 in, dia
drilled through. Blackened.
Approve
For Rele
se 1999/09/08 : C
-RDP81B00878
000200040001-0
SHEET 45 OF SHEETS
PARTS DATA LiST
8 9
 EQUIPMENT (NOMENCLATURE)
NAME OF CONTRACTOR Ramo
b24g
{posit
6
SHEET 46
SHEETS
PARTS DATA LIST
8 9
ITEM NO.
COMPLETE DESCRIPTION OF. ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
223
SPACER, Spring Catch.
MP10068
Ramo-
R-W Dwg.
2 Req. Pe
Made from sheet aluminum.
Wooldridge
50401429
Ass'y.
Over-all dimensions 0.25 in.
(2/Sys.)
lg x 0.25 in. wide x 0.062 in.
thick, with two 0.067 in. dia
holes drilled through and
countersunk. Blackened.
Z24
SPRING, Catch. Made from
MP10067
Ramo-
R-W Dwg.
1 Req. Per
strip steel. Over-all dirzen-
Wooldridge
50401416
Ass 'y.
sions 1. 00 in. lg x 0. 25 in.
(1/Sys. )
wide x 0.060 in. thick, with
four 0.067 in dia holes drill -
ed through. Blackened.
Approv
d For Rel
as 1999109108:
IA-RDP81 B0087
000200040001-
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1 SHEET 47 OF SHEETS
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021 PARTS DATA. L,ST
I 2 3 4 5 6
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
225
CAPSTAN AND CAPSTAN-DRIVE
NIP10301
Ramo-
R-W Dwg,
1 Req. Per
ASSEMBLY. Consists of the fol-
Wooldridge
50401002
Complete
lowing replaceable parts:
Ass'
y.
(l/Sys. )
226
SHIELD, Capstan. Alumi-
MP10051
Ramo-
R-W Dwg.
1 Req. Per
num casting. Over-all
Wooldridge
50401379
Ass'y.
dimensions 1. 375 in. lg x
(li Sys. )
0.968 in. wide x 0. 937 in.
high. A flanged truncated
cone with two holes 0.154 in.
dia drilled through flange,
and one hole 0. 312 in. dia
through top of cone. Black-
ened.
227
WASHER, Felt. Made from
MP10052
Ramo-
R-W Dwg.
1 Req. Per
sheet felt. Over-all dimen-
Wooldridge
50401383
Ass'y.
sions 0. 620 in. dia x 0. 060
(1/Sys.)
in. thick. One hole 0.150 in.
dia through center.
228
WASHER, Flat. Made from
MP10053
Ramo-
R-W Dwg.
1 Req. Per
aluminum. Over-all dimen-
Wooldridge
50401384
Ass'y.
sions 0. 590 in. dia x 0.020
(1/Sys. )
in. thick. One hole 0.250
in. dia through center.
Blackened.
229
CAPSTAN SHAFT AND
MP10050
Ramo-
R-W Dwg.
1 Req. Per
DRIVE WHEEL Assembly.
Wooldridge
50401376
Ass 'y.
Over-all dimensions 2.268
(1/Sys.)
in, lg x 3. 770 in. dia. Con-
sists of a capstan shaft,
flanged support bearing, and
drive wheel. Rim of drive
wheel has rubber surfve
For Rele
a 1999/09/08: CI
-RDP81B00
200040001-0
7 8
 EQUIPMENT (NOMENCLATURE MP10737 OF SYSTEM 1
NAME OF CONTRACTOR kamo Wooldridge CarpCONTRACT. R-W Project 5021
I 2
3 4 5 6
SHEET 48 OF SHE TS
PARTS DATA LIST
8 9
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACfOn'S
STOCK NO.
ACTUAL MFG.
Or ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN. JAN TYPE
PER EQUIPMENT
239
DISC, Strobe. Made from
h'IP10304
Ramo-
R-W Dwg.
1 Req. Per
aluminum foil. Over-all
Wooldridge
50401535
Ass 'y.
dimensions 3. 70 in. dia x
(1/Sys. )
0. 003 in. thick with a hole
1. 500 in. dia through the cen-
ter. Disc has stroboscopic
pattern on one side and has
pressure-sensative adhesive
on other side.
Approve
For Relea
e1999/09/08:C1
-RDP81BOO878
00200040001-0
 EQUIPMENT (NOMENCLATURE) MbIP10737 OF SYSTEM 1
,& M/1 ROC PIA-RbPA1 60 040001-0
NAME OF CONTRACTOR Ram cApW qp
I 2 3 4 5 6
SHEET -19 Or SHEETS
PARTS DATA LIST
8 9
'TEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
231
CAPSTAN-MOTOR MOUNTING .
1P10049
Ramo-
R-W Dwg.
Req. Per
ASSEMBLY. _ Over-all dimensio
Wooldridge
50401436
Complete
1. $44 in. .g x 1.875. in. wide x
Ass 'y.
1.016,.in. thick. Consists of the .
(1/Sys. )
following replaceable parts:
232
SPRING. Made from 0.034
MP10155
Ramo-
R-W Dwg.
1 Req. Per
in. dia music wire. Over-al
Wooldridge
50401402
Ass'y.
dimensions 1.312 in. lg x .
(1/Sys.)
0.095 in. wide x 0.250 in.
high. A pivct 0.250 in. lg x
0. 095 in. dia is soldered in
the center of spring. One
end of spring is offset 0.13
in. from centerline of spring.
Blackened.
233
SCREW, Set (reworked).
MP10110
AN565A6H-l0
R-W Dwg.
Req. Per
Allen head set screw. Over-
(Modified Per
50401404
Ass'y.
all dimensions 0.625 in. lg
R-W Dwg.
(2/Sys. )
x 0.138 in. dia. End opposite
50401404)
Allen socket is 0.0628 in. in
dia for length of 0.032 in.,
adjacent length is 0. 090 in,
in cia for length of 0.061 in.
Remainder of length is 0. 138
in. in dia, threaded 6-32 NC-
Z.
Blackened.
234
STUD, Double Mounting.
MP10647
Ramo-
R-W Dwg.
1 Req. Per
Made from steel. Over-all
Wooldridge
50401435
Ass'y.
dimensions 0.812 in. lg x
(1/Sys. )
0.250 in. wide x 0.525 in.
high. Consists of a plate
0.812 in. lg x 0.250 in. wide
x 0.030 in. thick with one
?
Approv
For Rele
se 1999/09/08 : C
A-RDP81 B00878
000200040001-0
 3
EQUIPMENT (NOMENCLATURE) ~12proved For Release 1999109108: CIA-RDP81B00878R000200040001-0
I NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
SHEET 50 OF SHEETS
PARTS DATA LIST
7 8 9
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUACK.
PER EQUIPMENT
JAN TYPE
234
STUD, Double Mounting.
(Cont'd.)
MP10647
Ramo-
R-W Dwg.
1 Req. Per
hole 0.098 in. dia drilled
Wooldridge
50401435
Ass'y.
through. Plate mounts two
(1/Sys.)
identical studs. Each stud
has a flanged end 0.250 in.
dia x 0.040 in. thick, 0.159
in. dia for a length of 0.218
in, and threaded 6-32 NC-2
for a length of 0.275 in.
Blackened.
235
STUD, Single Mounting. Ma
MP10649
Ramo-
R; W Dwg.
1 Req. Per
from steel. Over-all dimen-
Wooldridge
50401434
Ass'y.
sions 0.625 in. lg x 0. 312 in.
(1/Sys.)
wide x 0.525 in. high. Con-
sists of a plate 0.625 in. ig
x 0.312 in. wide x 0.030 in.
thick with one hole 0.098 in.
dia drilled through. Plate
mounts one stud with flanged
end 0.250 in. dia x 0.040 in.
thick, 0.159 in. dia for a
length of 0. 218 in. and thread
ed 6-32 NC-2 for a length of
0.275 in. Blackened.
236
BRACKET, Spring Adjusting.
MP1C103
Ramo-
R-W Dwg.
1 Req. Per
Made from steel. Over-all
Wooldridge
30401399
Ass'y.
dimensions 0. 750 in. lg x
(1/Sys. )
0. 375 in. wide x 0.437 in.
high. Rectangular flange and
cylinder. Flange is 0. 750 in.
lg x 0.375 in. wide x 0.040 in
thick with two holes 0. 120 in.
dia drilled through in oppo-
site corners. Cylinder is
A
proved Fo
Release 1999/09
8 : CIA-RDP81B
0878R00020004
01-0
i 2 3 4
 3
EQUIPMENT (NOMENCLATURE MP10737 OF SYSTEM 1
NAME OF CQNTRACTCR xarrao- ooldridge CorpCONTRACT R- roject
I 2 3
ITEM NO. COMPLETE DESCRIPTION OF ITEM CIRCUIT
SYMBOL
236 BRACKET, Spring Adjusting.
(Cout'd. )
0.250 in. 0. D. with a 0. 1S6
in. I. D. drilled through and.
tapped 8-32 NC-2 thread.
wide x 0. 397 in. deep. Black
ened.
End of cylinder has four equa-
spaced radial slots 0.046 in.
237 1 BLOCK, Support Spring.
from aluminum. Over-all
dimensions 0.750 in. lg x
0.250 in. wide x 0,187 in.
high. Rectangular strip with
four bosses. Strip is 0. 750
in. lg x 0.250 in. Hide x
0.031 in. thick with two holes
0.120 in. dia drilled through.
Bosses are 0.075 in. square
x 0.156 in. high spaced symet
rically about the canter.
Blackened.
STOP, Spring. Made from
sheet steel. Over-all dimen-
sions 0.812 in. lg x 0. 750 in."
wide x 0.015 in, thick. T-
shape. Arms of stop are 0.
in, wide and. extend 0. 750 in.
over all, with a 0.116-in. -dia
hole 0.125 in. from each end.
Body of stop is 0.480 in. lg
x 0. 375 in. wide, with tongue
extending 0.082 in. along
centerline. Tongue is 0.095
in. wide. Blackened.
Approved
SHEET 51 OF SHEETS
PARTS DATA LIST
4 5 6 7 8 9
CONTRACTORS
ACTUAL MFG.
MFG. TYPE OR
ITEMS FER
RECOMMENDED QUAN.
JAN TYPE
STOCK NO.
OF ITEM
STOCK N0. 1
EQUIPMENT
PER EQUIPMENT
Ramo-
R-W Lwg.
1 Req. Per
Wooldridge
50401399
Ass 'y.
(1/Sys. )
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50401400
Ass'y.
(1, Sys. )
Ramo-
Wooldridge
R-W Dwg.
50401403
1 Req. Per
As s'y.
(1/Sys. )
1999/09/08 : CIA[RDP81 B00878Rg00200040001-0
 3
EQUIPMENT (N OMEN CLATURE)AppFRyqgfs 5IP J108:CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR
I 2
,TEM NO.
Ramo-Wooldridge CorPCONTRACT R-W Project 5021
COMPLETE DESCRIPTION OF ITEM
BRACKET, Motor Support.
Made from aluminum. U-
shaped bracket. Over-all
dimensions 1. 815 in. lg x
1. 875 in. wide x 0. 218 in.
thick. One hole 0.186 in. dia,
two holes 0. 070 in. dia tappe
2-56 NC-2 thread, three isle
0.169 in. dia, and four holes
0.120 in. dia countersunk, a
holes drilled through. Black
ened.
SHEET 52 OF SHEETS
PARTS DATA LIST
3 4 5 6 7 8
CIRCUIT
SYMBOL
CONTRACTOR'S
AC rUAL MFG.
MFG. TYPE OR
ITEMS PER
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50401390
Ass'y.
(1/Sys, )
RECOMMENDED QUAN.
PER EQUIPMENT
Approv4d For Rel
 EQUIPMENT (NO MEN CL ATURE~PproMM119dr3FXe s+3'I8 1d8 : CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
COMPLETE DESCRIPTION OF ITEM
CAPSTAN MOTOR AND FLY-
WHEEL ASSEMBLY. Over-all
dimensions 2.968 in. lg x 2.094
in. wide x 2.594 in, high. Con-
sists of the following replaceable;
parts and assemblies:
241 I CLAMP, Spring. Made from
steel. Semi-circular clamp.
Over-all dimensions 0.765
in. lg x 0. 378 in. wide x 0.130
in. high. One hole tapped
0-80 NF-2, 0. 320 in. from
center of radius of clamp.
One hole 0.075 in. dia coun-
terbored 0.100 in. dia in opp
site end 0. 320 in. from cen-
ter of radius of clamp.
MOTOR, Assembly. Over-
all dimensions exclusive of
electrical filter 2. 901 in, lg
x 2. 094 in. dia. Consists of
motor and electrical filter,
stationary shaft, fly wheel,
and spacer.
3
MP10693
Ramo-
Wooldridge
Ramo-
Wooldridge
Rarno-
Wooldridge
Ramo-
Wooldridge
R-W Dwg.
50401389
R-W Dwg.
50401488
R-W Dwg.
50401389
MP10694
COLLAR. Made from stain- MP10698
less steel. Cylindrical shape
Over-all dimensions 0. 320 in
ig x 0.500 in. dia. One end
has I. D. of 0.375 for length
of 0.046, and remaining I. D.
is 0.1252 in. One end of col-
lar is threaded (32 threads
inch) for a length of 0.130 in.
A radial hole through rove For Relea e 1999/09/08: CI
threaded area is tappe2-56
NO-2.
R-W Dwg.
50401487
-RDP81B00878 00200040001-0
ITEMS PER
EQUIPMENT
1 Req. Per
Complete
Ass 'y.
(1/Sys. )
4 Req. Pei
Ass'y.
(4/Sys.)
1 Req. Per
Ass 'y.
(1/Sys. )
1 Req. Per
Ass'y.
(1/Sys. )
SHEET
SHEETS
PARTS DATA LIST
8 9
RECOMMENDED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
ect 5021
amo- oo ri ge 6rpCONTRACT roj
NAME OF CONTRACTOR
I 2
ITEM NO.
246
COMPLETE DESCRIPTION OF ITEM
SPRING. Made from 0. 018
in. dia music wire (15 coils).
Over-all dimensions 0.49 in.
lg x 0. 515 in. dia. Blackened.
SHIELD, Top Motor. Made
from mu-metal. Cylindrical
shape. Over-all dimensions.
0.907 in. lg x 1.030 in. dia.
I. D. of 0. 990 in. One end
closed, one end open.. Two
diametrically opposed holes
0. 062 in. in dia drilled 0. 09
in. from open end. Open end
of cylinder has notch 0.41 in.
Ig x 0.22 in. wide. One notc
0.41 in. lg x 0.22 in. wide in
from open end.
SHIELD, Bottom Motor.
Made from mu-.metal. Cylin-
drical shape. Over-all dmerr
sions 1.455 in. lg x 1. 367 in.
dia. Top of shield has two
holes 0.099 in. dia and . one
hole 0.437 in. dia. Shield is
1. 015 in. dia for a length of
1. 09 in.., remaining length of
shield, 0.37 in., is 1. 055 in.
dia. Two holes 0.076 in. dia
for mounting clamp, drilled
through shield 0.16 in. and
0. 30 in. from open end-
3 4
SHEET 54 0
PARTS
D/
CIRCUIT
CONTRACTORS
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
(
PER EQUIPMENT
Ramo-
Wooldridge
R-W Dwg.
50401489
1 Req. Per
Ass 'y.
MP10695
Ramo-
R-W Dwg.
(1/Sys.)
1 Req. Per
Wooldridge
50401395
Ass'y.
MP10696
Ramo-
R-W,Dwg.
(1/Sys. )
1 Req. Per
Wooldridge
50401396
Ass 'y.
(1/Sys.)
Approved For Release 1 999/09/08 t
CIA-RDP81 B00818R00020004000 -0
 EQUIPMENT (NOMENCLATURE MP10737 OF SYSTEM 1
prnvarl For Ralaasa 1999109/08: .IA-RDP81 B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
2 3 4 5 6
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
247
CLAMP, Cable. A two-piece
.
MP10701
Ramo-
R-W Dwg.
11 Req. Per
aluminum clamp. Over-all
Wooldridge
50401512
Ass'y.
dimensions 0. 56 in. lg x 0.34 V
(1/Sys.)
in. wide x 0.156 in. high.
Curved mounting surface has
two 0.07(x-in.-dia mounting
holes. Cap of cable clamp is
held by two 0-80 NF-Z screw
248
FILTER, Electrical. Rec-
Z703
MP10104
Ramo-
R-W Dwg.
1 Req. Per
taigular shape. Over-all
Wooldridge
50401495
Ass'y.
dimensions 2. 546 in. lg x
(1/Sys.)
1. 000 in. wide x 0. 750 in.
high. Two leads 9.75 in, lg
soldered to terminals.
Approved
For Relea
e 1999/09/08 CI
-RDP81B00878R
00200040001-0
SHEET 55 OF SHEETS
PARTS DATA L!ST
8 9
 EQUIPMENT (NOMENCLATUf roves o~ e~gaWlNEW :iCIA-RDP81B00878R000200040001-0
SHEET 56 OF SHEETS
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-.W Project 5021 PARTS DATA LIST
I 2 3 4 5 6 7 g
ITEM NO
COMPLETE DESCRIPT 9
I
N
.
O
OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO
ITEMS PER
RECOMMENDED QAN.
JAN TYPE
249
TRANSITION ASSEM?ILLY
O
.
.
EQUIPMENT
FER EQUIPMENT
.
ver
ll di
MP10016
Ra.-no_
R-W Dwg.
1 Re
Per
a
mensions 2. 75 in. I g 1. 18
g
in. wide x 3.88 in. high. Ccn-
Wooldridge
5C401352
q.
Comph,te
sists of the following replaceable
Ass'y.
parts and assemblies:
(1/Sys,)
250
PLATE, Mounting. Made
from magnesium, Over-all
MP10157
amo-
R-W Dwg.
1 Req. Per
dimensions 2. 75 in, lg x
Wooldridge
50401348
Ass'y.
1.13 in. wide x 0.562 in.
(1/Sys.)
high. One end 1.18 in. lg x
0.50 in. wide x 0.094 in.
thick, with two 0. 116-in. -dia
holes and one 0.116-in. -dia
chamfered hole. A 90? V-
-shaped offset with a 0.189-in
dia hole, and remaining
length 0.50 in. wide x 0.094
in. thick, with one 0.144-in.
dia chamfered hole and one
0.116-in. -dia hole. Black-
ened.
251
SUPPORT, Upper-Transi-
MP10096
Ramo-
R-W Dwg.
1 Req
Per
tion Guide. Made from
Wooldridge
50401343
.
Ass'y.
steel. Over-all dimensions
(I/Sys
)
1. 625 in. lg x 0. 250 in. dia.
.
One end 0.138 in. dia thread-
ed 6-32 NC-2 for length of
0.287 in. One end 0.123 in.
dia chamfered with 0.021-in.
deep x 0.012-in.-wide groov
0.160 in. from end. 0.625
in. of length 0.250 in. dia.
Blackened.
Approved
For Relea
e 1999/09/08 CI
-RDP81B00878
00200040001-0
 E(IUIPMENI (NOME NCLATURE,t pprobbU r3ReQ'sS'fSgBJ91CB : CIA-RDP81B00878R000200040001-0
NAME CF CONTRACTOR Ramo-Wooldridge Corp CONTR C'T R-W Project 5021
ITEM NO. COMPLETE DESCRIPT!ON OF ITEM
SUPPORT, Lower-Transi-`
tion Juid~, Made f'?orr, steel
Over-all dimensions 1. 00 in.
lg x 0. 250 in. dia. One end.
0.112 in, dia threaded 4-40
NC-2 for length of 0.218 in.
One end 0. 189 in, dia, notch-
ed C. 062 in, deep x 0.046 in.,
wide across diameter, with
0.014-in. -deep x 0. 017-1u. -
wide groove 0.166 in. from
end. A 0, 250-in. -dia x
0.062-in.-wide shoulder
0. 312 in. from one end,
Blackened,
TRANSITION SUPPORT AND
SLEEVE Assembly. Osrer-
all rlimensionG 2, 313 in. Ig
x 0, 312 in, dia. Coneists of
a steel support and teflon
rod sleeve. One end 0.138
in. dia threaded 6-32 NC-Z.
A 0. 312-in. -dia x 0.138-in. -
lg shoulder with a 0. 062-in. -
dia hole drilled through dia.
1.58 in. of length 0.188 in.
dia,
and chamfered both en
dia hcle drilled throng
GUIDE, Lower- Transition.
Made from teflon. Over-all
dimensions 0. 50 in, dia x
b. 377 in. lg.x A 0.50-in, -
dia x 0.062-in. -wide flange
at each end, 0.375 in, d;a
between flanges. A 0,189-inj
3
CIRCUIT
SYMBOL
d For Rel
5 6
PARTS DATA LIST
CONTRACTOR'S
ACTUAL MFG,
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
.
PER EQUIPMENT
MP10094
amo-
R-W Dvg,
1 Req. Per
Wooldridge'
50401344
Ass 'y.
(1/Sys. )
Ramo-
R-W Dwg.
I Req. Per
Wooldridge,
Rarno-
50401351
R-W Dwg. I
Ass 1y.
(11Sys, )
l*Req. Per
Wooldridge
50401347-1
Ass 'y.
(1/Sys, )
IA-RDP81B00878R000200040001-
SHEET 57 OF SHEETS
8 9
 3
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
LI 2 3 4
5 6
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
255
GUIDE, Upper-Transition. `
1MMP10095
Ramo-
R-W Dwg.
1 Req. Per
Made from teflon. Orer-all
Wooldridge
50401342
Ass'y.
dimensions 0. 375 in. dia x
(I/Sys. )
0. 377 in. widh.. A 0. 375-in.
dia x 0.062-in. -wide flange
at each end. -0.250 in. dia
between flanges. A O.129-in.
dia hole drilled through axis
and chamfered both ends.
256
WASHER, Lower-Transition.
MP10093
Ramo-
R-W Dwg.
2 Req. Per
Made from brass laminate.
Wooldridge
50401485-2
Ass'y.
Over-all dimensions 0.375 i?
(2/Sys.)
dia x 0.047 in. thick. A 0.193
1
in. dia hole through axis.
Z57
WASHER, Upper-Transition.
MP10185.
Ramo-
R-W Dwg.
2 Req. Per
Made from brass laminate.
Wooldridge
50401485-3
Ass ly.
Over-all, dimensions 0. 312
(2/Sys. )
in. dia x 0. 047 in. thick. A
0. 136-in. -dia hole through
axis.
25g.
WASHER, Lower-Transition.
MPIO132
Ramo-
R.-W-Dwg.
1 Req. Per
Made from steel. Over-all
Wooldridge'.
50401345-,l
Ass'y.
dimensions 0.312 in. dia x
(1/Sys. )
O.02 in. thick. A 0.196-in, -
dia hole through axis. Black
ene.d.
"259.
WASHER, Upper-Transition.
MP10014
R,mo-
R-W Dwg.
1'Req. Pe:
Made from steel. Over-all
Wooldridge
50401345.,
Ass 'y.
dimensions 0.312 in. dia x
(1/Sys. )
0.02 in. thick. A 0.136-in. -
dia hole through axis. Black
ened. Approve
For Relea
e 1999/09/08 CI
-RDP81B00878
00200040001-0
SHEET 58 OF SHEETS
PARTS DATA LIST
8 9
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
SHEET 59 OF SHEETS
PARTS DATA LIST
1)
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMZNT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
260
REEL SUPPORT Assembly.
MP10130
Ramo-
Items 2, 3, and
1 Req. Per
Over-all dimensions 2. 00 in, Ig
Wooldridge
13 of R-W Dw
Complete
x 0.750 in. dia. Consists of the
50401002
Ass'y.
following replaceable parts:
(1/Sys.)
261
BUSHING, Reel. Made from
MP10071
Ramo-
R-W Dwg.
1 Req. Per
steel. Over-all dimensions
Wooldridge
50401292
Ass'y.
0. 563 in. lg x 0. 625 in. dia,
(1/Sys. )
with a 0.625 in. dia x 0.097
in. wide flange at one end
and remainder of length 0.37
in. in dia, and with a 0.250
in. dia hole through axis of
bushing. Chrome plated.
262
SUPPORT, Reel. Made fro
MP10072
Ramo-
R-W Dwg.
Req. Per
steel. Over-all dimensions
Wooldridge
50401293
Ass'y.
2.000 in. lg x 0. 625 in. dia,
(1/Sys.)
with one end 0. 3125 in. dia
threaded 0. 250-20 NC-3 for
a length of 0. 240 in. , with a
0. 152 in. lg x 0. 675 in. dia
flange flatted to a width of
0. 562 in. and located 0. 531
in. from threaded end, and
with opposite end 0. 2495 in.
in dia, with a 0. 017 in. deep
groove located 0. 217 in. from
the end. Chrome plated.
263
RETAINER, Reel. Made
MP10012
Ramo-
R-W Dwg.
1 Req. Per
from aluminum. Over-all
Wooldridge
50401291
Ass'y.
dimensions 0. 312 in. lg x
(1/Sys.)
0. 750 in. dia, with a 0. 750
in. dia x 0. 060 in. wide
flange at one end and remain-
der of length 0. 437 iAppi*\AkW
or Releas
1999/09/08: CIA-
DP81B00878R0
0200040001-0
 3
EQUIPMENT (N O M E N C L AT U flrovEMftp e@Re Ipft I CIA-RDP81 B00878R000200040001-0
NAME OF COHTRAC tOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
I 2
ITEM NO.
COMPLETE DESCRIPTION OF. ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MEC.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QOAN?
PER EQUIPMENT
JAN TYPE
263
RETAINER, Reel (Cont'd.)
MP10012
Ramo-
R-W Dwg.
I Req. Per
,
and with a 0.251 ?n. dia hole
Wooldridge
50401291
Ass'y.
drilled through axis of retain
(1/Sys. )
er. Blackened.
264
CLIP, Spring. Made frorx
MP10133
Ramo-
R-W Dwg.
1 Req. Per
0. 033 in. music wire. Over-
Wooldridge
50401144
Ass'y.
all dimensions 0. 625 in. lg
(1/Says. )
x 0. 284 in. wide x 0.033 in.
thick. Blackened.
Approved
or Releas
1999/09/08 : CIA
RDP81 BOO878R
0200040001-0
4 5
SHEET 60 OF
SHEETS
PARTS DATA LIST
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ram -Wooldridge CorpCONTRACT R-W Project 5021
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
265
REEL GUIDE ASSEMBLY. Over-
MP10651
Ramo-
R-W Dwg.
4 Req. Per
all dimensions 1. Z5 in. lg x 0.656
Wooldridge
50401537
Complete
in. wide x 1.813 in. high. Con-
Ass'y.
sists of the following replaceable
(4/Sys.)
parts and assemblies:
266
BRACKET, Spool. Made
MP10705
Ramo-
R-W Dwg.
1 Req. Per
from aluminum. Over-all
Wooldridge
50401525
Assay.
dimensions 1.06 in. lg x
(4/Sys.)
0.312 in. wide x 1.167 in.
high. One 0.188-in.-dia
hole drilled through and
chamfered at one end, two
colinear 0.126-in. -dia holes
drilled through, one 0. 050-i
.
dia hole in the upper bracket
arm and one 0.126-in. -dia
hole in the lower bracket
arm. Blackened.
267
SHAFT, Bracket. Made
MP10700
Ramo-
R-W Dwg.
1 Req. Per
from steel. Over-all dimen
Wooldridge
50401527
Assay.
sions 1. 732 in, lg x 0. 312 in.
(4/Sys.)
dia. One end threaded 6-32
NC-Z, a 0.010-in. -wide x
0. 312-in. -dia flange 0.462
in. from threaded end, and
remaining length 0.186 in.
Blackened.
268
ROLLER Assembly. Made
MP10697
Ramo-
R-W Dwg.
2 Req. Per
from nylon rod. Over-all
Wooldridge
50401526
Assay.
dimensions 0.476 in. lg x
(8/Sys.)
0.625 in. dia. One end 0.500
in. dia for length of 0. 169 in.
a 0.041-in. -lg x 0. 625-in.-
diaflange at opposit@.ppxdyeal
or Releas
1999/09/08 : CIA
RDP81B00878R
0200040001-0
2
SHEET 61 OF
PARTS DATA LIST
8 9
 NAME OF CONTRACTOR Rama-".~oaldridge Corp CONTRACT R-W Project 5021 PARTS DATA LIST
1 2 3 4 5 6 7 8 9
EM NO. COM2LETE DESCRIPTION OF IT EM CIRCUIT CONTF.C1OR'S ACTUAL MFG. I MFG. TY'E OR ITEMS PER RECOMMENDED QUAN. JAN TYPE
SYMBOL STOCK NO, OF ITEM - STCCK NO. EQUIPI4ENT PER EQUIPMENT I
268 ROLLER Assembly (Cont'd. )
MP10697 Ramo- R-W Dwg. Req. Per
0 315 -9n. - dia ?tole through Wooldridge 50401526 Ass 'y,
bearing
axis, and a ball- (8/Sys.)
assembly pressed into each
end.
I I
271,
SH&FT, Roller. Made from
steel. Over-all dimensions
1.343 in, lg x 0.125 in, &a. One end threaded 2-56 NC-2A,
one end slotted 0, 030 in.
wide x 0.050 in deep, and
1,156 in, of length 0.125 in.
dia. Blackened,
CENTER SPACER, Spool.
Made from steel. Over-all
dimensions 0.250 in, dia
0.082 in, thick. A 0.180-in,
dia hub, and a 0.126-i , -dia
hole drilled through axis.
Blackened.
END SPACER, Spool. Made
from steel. Over-all di-nen
lions 0,180-in, dia. x 0.017
in... thick. A 0,126-i i. ?dia
hole drilled through axis,
Blackened,
PLUNGER, Made from
steel. Overall dimensions
1.290 in. lg x C.12 4 in. dia,
rounded edge at one end, an
undercut to 0.093-in, dia
0.03 in. from other en,prov
Chrome plated, 1
i
Rar.1o-
Woo_dridge
R-W Dwg.
50401531
1 Req. Per
Ass ly-
(4/Sys.)
Ramo-
Wooldridge
R-W Dwg.
50401528
I Req. Pe?!
As a'y,
Ramo-
Wooldridge
R-W Dwg.
50401529
(4/Sys.)
2 Req. Per
As sly.
R.amo-
Wooldridge
R-W Dwg.
50401538
(8/Sys.)
1 Req. Per
Ass ly-
(4/Sys.)
IA-RDP81B R000200040001-
SHEET 62 OF SHEETS
 EQUIPMENT (NOMENCLATURRE~ ttvvttppl0 37 OF yST~M 1 SHEET 63 OF SHEETS
A proveWd' Release 199109708: CIA-RDP81600878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021 PARTS DATA LIST
1 2 3 A 5 6 7 8 9
COMPLETE DESCRIPTION OF ITEM
SPRING, Plunger Return.
A coil spring consistiug of
18 coils of 0.012-in. -dia
music wire. Over-all
dimensions 0. 60 ia. ig x
0.180 in, dia. Blackened.
REEL GUIDE MOUNTING PLATE
AND RETAINER SPRING ASSEM-
BLY (Type 1). Over-all dimen-
sions 0. #50 in. lg x 0.640 in.
wide x 0. 940 in, high. Consists
of the foLowing rep.eceable parts
and assemblies:
MOUNTING PLATE.ssetn-
bly. Over-all dimensions
0.875 in. lg x 0. 640 4.n. wide
x 0.940 in. high. Consists
of a plate, spring post, a
reel-stop pin, and a plate-
mounting pin. Blackened.
276 SPRING. A;coil spring con-
siscing::of 7 coils of 0.019-in,
dia'.musie. wire. ,One end
~coil,extendad. tangentially
.5@ .and ona end coil
extended tangentially 0. 7C, -
iuo. at angle. of 80? with other
end, Blackened-
CIRCUIT
SYMBOL
CONTRACTOR'S ACTUAL MFG.
STOCK NO. OF ITEM
MP10655 Ramo-
Wooldridge
MFG. TYPE OR
STOCK NO.
R-W Dwg.
50401540
ITEMS PER RECOMMENDED QUAN. JAN TYPE
EQUIPMENT PER EQUIPMENT
1 Req. Per
Ass'y.
(4/Sys.)
MP10712 Ramo- R-W Dwg. 13 Req. Per
Wooldridge 50401002 Complete,
Ass'y.
(3/Sys.)
MP10704 Ramo-
Wooldridge
R-W Dwg.
50401533-1
1 Req. Per
Ass 'y,
(3/Sys.)
MP10652 Ramo-
Wooldridge
R-W Dwg.
50401536-1
1 Req. Per
Ass 'y.
(3/Sys,)
Approved
 roveAd 7QIee MW0M81: CIA-RDP81 B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-1
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
277
REEL GUIDE MOUNTING PLAT
MP10713
Ramo-
R-W Dwg.
1 Req. Per
AND RETAINER SPRING ASSEIMI
Wooldridge
50401002
Complete
BLY (Type 2). Over-all dimen-
Ass'y.
sions 0.850 in. lg x 0. 640 in.
(1/Sys. )
-vide x 0. 940 in. high. Consists
of the following replaceable part
and assemblies:
278
MOUNTING PLATE Assem-
MP10706
Ramo-
R-W Dwg.
1 Req. Per
bly. Over-all dimensions
Wooldridge
504015:?3-2
Ass'y.
0, 875 in, lg x 0.640 in, wide
(1/Sys.. )
x 0.940 in. high. Consists
of a plate, spring post, a
reel-stop pin, and a plate-
mounting pin. Blackened,
279
SPRING. A coil spriing con-
MP10653
Ramo-
R-W Dwg.
1 Req. Per
sisting of 7 coils.of.0a 029-in
-
Wooldridge
50401536-2
Ass'y,
dia,music wire, . One end
(1/Sys. )
coil extended tangentially
0.50:in.. and.one .erd coil
extended:tangentially 0.70
in. at angle of 800 with othe
end. Blackened.
280
PRINTED CIRCUIT BOARD AND
MP10001
Ramo-
R-W Dwg.
Req. Per
COMPONENT ASSEMBLY.
Wooldridge
50405013
Complete
Over-all dimensions 10.906 in.
Ass 'y.
lg x 10.327 in. wide x 1.50 in.
(1/Sys. )
high. This Assembly includes
the following replaceable elec-
-
trical parts:
Approve
For Rele
se 1999/09/08 CI
-RDP81B00878
000 01-0
SHEET 64 OF SHEETS
PARTS DATA LeST
8 9
 Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
EQUiPMENT (NOMENCL. TORE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ramo-Woolriridgc Corp.CONTRACT
2
3 4
R-W Proiccti
SHEET 65 OF SHEETS
PARTS DATA LIST
5 6
ITEM NO. COMPLETE DESCRIPTIO+J OF ITEM CiRC'JIT CONTRACTOR'S ACTUAL MFG.
SYh~BOL I STOCK NO. OF ITEM
CAPACITOR, fixed, silver mice,
0. 813 in. lg x 0.813 in. wiae x
0. 344 in. thick, 0. 01 mf, , + 1%,
500 vdcw
CAPACITOR, fixed, paper -
dielectiic, 0.400 in. lg x 0.750
in. dia, 0. 047 mfd, + 20%, 600
vdcw, -55C to +1000 operating
temperature
CAPACITOR, fixed, paper
dielectric, 0. 235 in. lg x 0. 562
in. dia, 0. 01 mfd, + 20%, 400
vdcw, -55C to +1000 operating
C702
C703 MP30034
C7041 MP30C4+
MFG. TYPE OR ITEMS PER , RECOMMEODED QUAN.
STOCK NO. EQUIPIAENT PER EQUIPMENT
P123ZNG
P123ZNG 8
286
temperature
CAPACITOR, fixed, flat disc
C706
821-. 01
4
ceramic, .350 in. dia, 0.01 rr.fd,
600 vdcw
Same as C701
C709
1
Same as C701
0710
Same as C703
C711
290
Same as C704
0712
Same as C7044.
Approv~
d Fofe
C714
Same as G706
 EQUIPMENT (No MENCLATURE)Appr ~:;~?ZQLas% icl66I 8 : CIA-RDP81BOO878R00020004000
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5U11
1
ITEM NO.
294
295
) 1 256
298
2
COMPLETE DESCRIPTION OF ITEM
Same ac C701
Same as C701
Same as C703
Same as C704
Same as C704
Same as C706
Same as C701
Same as C701
Same as C'03
Same as C704
Same as C704
Same as C706
3 4
CIRCUIT
SYMBOL
CAPACITOR, fixed, -herrnet cally
sealed, 0.750 in. lg x 0.175 in.
dia, 0. 0047 mfd, + 10%, 100 vdc
+125C to -55C operating temper-
ature
CAPACITOR, fixed, hermetically,,
sealed, 0. 875 in. lg x 0. 312 in.
dia, 0.022 mfd, + 10%, 100 vdcw
+125C to -55C operating temper-
ature
Approved
C 717
C 718
C 719
C720
C721
C722
C725
C726
C727
C 728
C 729
C 730
0732
5 6
CONTRACTOR'S JACTUAL MFG.
STOCK NO. OF ITEM
MFG. TYPE OR
STOCK NO.
HY-THERM
1K1472K
ITEMS PER
EQUIPMENT
MP30065 Hopkins
MP38955 Hopkins
wwwwwo
1999109108: CIA RDP81 B00878R
NY - THERM
1K1223K
SHEET
66 OF
SHEETS
PARTS DATA LIST
8 9
RECOMMENDED QUAN.
PER EQUIPMENT
 3
grj ~p1~8@fQ81:CIA-RDP81 B00878R000200040001-0
qft
EQUIPMENT (NOMENCLATURE'~pprov
R-W Project 5021
NAME OF CONTRACTOR Ramo-Wooldridge Corp _ONTRACT
1 2
COMPLETE DESCRIPTION OF, ITEM
CAPACITOR, fixed, sub-minia-
ture electrolytic, 0. 375 in, lg x
0.219 in. dia, 6 mfd, 40 vdcw,
+185C to -55C operating temper-
ature
CAPACITOR, fixed, sub-minia-
ture electrolytic, 0,375 in. lg x
0, 219 in. dia, 2 mfd, 100 vdcw,
+85C to -55C operating tempera
ture
CAPACITOR, fixed, paper-di-
electric, 0. 312 in. lg x 0.75 in,
dia, 0.10 mfd, + 20%, 200 vdcw,
+100C to -55C operating temper-
ature
CAPACITOR, fixed, sub-minia-
ture paper-dielectric, 0,688 in.
lg x 0.175 in. dia, 0, 0047 mfd,
100 vdcw, +85C to -40C operat-
ing temperature
CAPACITOR, fixed, paper-di-
electric, 0.175 in, lg x 0.438 in.
dia, 0.01 mfd, + 20%, 200 vdcw,
+100C to -55C operating temper-
ature
CAPACITOR, fixed, flat disc
ceramic, 19/32 in, dia, App?oved
mfd, 600 vdcw
3 4
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
C 743
For Relea
MP30041 I
I
e 1999/09/08 : CIA
ACTUAL MFG.
OF ITEM
Mallory
Mallory
Sprague
6 7
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMEMT
Erie 817-.02
-RDP81B00878R 00200040001-0
SHEET 67 OF SHEETS
PARTS DATA LIST
RECOMMENDED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
A.. _.._.._J r_.. P1_1_--- AI
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
2 3 4 5 6 7
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
.314
CAPACITOR, fixed, silver mica
C744
MP30028
El Menco
CM-30-622
1
13/16 in, ig x 13/16 in, wide x
9/32 in, thick, 6200 mmf, + 1%,
500 vdcw, +125C to -55C operat-
ing temperature
315
Same as C737
0745
316
Same as C743
0746
317
Same as C743
C749
318
CAPACITOR, fixed, silver mica
C750
MP30017
El 'Lvienco
DM.-19-152
4
0.625 in. lg x 0.406 in. wide x
0. 156 in. thick, 0. 0015 mfd, + 5%
500 vdcw, +125C to -55C operat-
ing temperature
319
Same as C750
C751
320
Same as C750
C752
321
Same as C750
C753
322
CAPACITOR, tantalum, .dry
C754
MP30003
General
29F447
electrolytic, polarized, 0.875 in.
Electric
Ig x 0.281 in. dia, 4 mid, 150
vdcw, +85C to,-55C operating
temperature
323
Same as C754
C755
324
CAPACITOR, fixed, sub-minia-
0756
MP30007
Mallory
TAP
3
ture electrolytic, 0, 375 in. lg x
0.219 in. dia, 20 mfd, 10 vdcw,
+85C to -55C operating tempera-
tare
325
Same as C743
C757
pproved
or Release 1999/
9/08: CIA-RDP81
0087812000
0001-0
SHEET 68 OF SHEETS
PARTS DATA LIST
8 9
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ram"o
1 2.
ITEM N0. COMPLETE DESCRIPTION OF ITEM
CONTRA
326
Same as C756
C 758
327
Same as C743
0769
32E
Same as C756
G'760
3Z9
Same as 0743
C 761
CAPACITOR, fixed, tantalum,
C76L
dry electrolytic, polarized, 2.125
in. lg x 0. 375 in. dia, 100 mfd,
50 vdcw, +85C to -55C operating
temperature
CAPACITOR, fixed, cerami;-
disc, C. Z50 in. dia, 0.0008 mfd,
600 vdcw
332 Same as C763
333 Same as C763
334 COIL, tnroid wound, plastic en-
capsulated, 0. 813 in. lg x 0. 813
in. wide x 0. 375 in. thick, 10 mil
lihenrie s
335 COIL, torpid wound, plastiz en-
capsulated, 0. 313 in. lg x 0. 813
in, wide x 0.3?5 in. thick, 50 mil
ihanrie s
CIRCUIT
CONTRACTOR'S
JACTUAL MF(5.
MFG. TYPE OR
ITEMS PcR
IIIEC,01114ENDED QUAN.I
-
SYMBOL
STOCK NO.
OF 11 EM
STOCK NO.
EQUIPMENT
FER EQUIPMENT
~~
0764
0765
L701
T R-W Project 5021
General
Electric
MP30?.02 Erie
Approve
liycox EM-14P
Hycor I :M-14P I 2
SHEET 69 OF SHEETS
PARTS DATA LIST
8 9
JAN TYPE
 EQUIPMENT (NOMENCLATUREProMPved 1Por 73eae?F 5ase19~/d8 ,CIA-RDP81B00878R000200040001-0
P
NAME OF CONTRACTOR Ramo-Wooldridge Corp. CONTRACT R-W Project 5021
ITEM NO
, COMPLETE DESCRIPTION OF ITEM
CIR
'
8
9
CUIT
CONTRACTOR
S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED OLMN
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
.
PER EQUIPMENT
JAN TYPE
336
Same as L701
L703
337
Same as L702
L704
338
COIL, toroid wound, plastic
L705
MP40020
Rayco
1923-2
1
encapsulated, 1, 500 in. dia x
0.625 in, thick, 1 henry, ? 2%
339
TRANSISTOR, silicon, junction,
Q701
MP 50001
Texas
903
3
0.315 in. lg x 0.405 in, wide x
instrument
0.210 in. thick, 3 leads 1.50 in.
lg
340
Same as Q701
Q702
341
Same as Q701
Q703
342
TRANSISTOR, silicon, junction,
Q704
MP50002
Texas
951
3
0.637 in. l.g x O.429 in. wide x
Instrument
0.274 thick overall, 3 leads 1
50
.
in. lg
343
Same as Q704
Q705
344
Same as Q704
Q706
345
RESISTOR, fixed, composition,
R701
None
Allen-
EB
1
value selected on basis of
Bradley
equipment performance, + 5%
,
1/Z watt
346
RESISTOR, fixed, composition,
R702
None
Alen-
EB
1
value selected on oasis of
Bradley
equipment performance, + 5%
-
,
1/2 watt -
Approv
For Rele
se 1999/09/08
A-RDP81B00878
000200040001-0
?
3 4 5 6
SHEET 70 OF SHEETS
PARTS DATA LIST
 EQUIPMENT (N OMEN CLATURE~pprdlOaOit"4Y13W/08 : CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Rama-Wooldridge Corp CONTRACT n R-W Project'5021
2
3 4
DATA
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
.STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
347
RESISTOR, fixed, composition,
R703
MP20296
Allen-
EB
RCZOGF104J
A0, 000 ohms, + 5%, 1/2 watt
Bradley
348
RESISTOR, fixed, wire-wound,
R704
MP20035
Hycor
5
1500 Dims, +1%
349
RESISTOR, fixed, wire-wound,
R705
MP20036
Hycor
3
330C ohms, + 1%
350
RESISTOR, fixed, composition,
R706
None
Allen-
EB
1
value selected on basis of
Bradley
equipment performance, + 5%,
1/2 watt
351
RESISTOR, fixed, composition,
R707
MP20101
Allen-
EB
RCZOGF224J
220, 000 ohms, + 5%, 1/2 watt
Bradley
352
Same as R703
R708
353
RESISTOR, fixed, composition,
R709
MPZ0116
Allen-
EB
RCZOGF512J
5100 ohms, + 5%, 1/2 watt
Bradley
354
Same as R707
R710
355
RESISTOR, fixed, composition,
R711
MP20326
Allen-
EB,
8
RC20GF102J
1000 ohms, + 5%, 1/2 watt
Bradley
356
RESJSTOR, fixed, composition,
R712
MP20368
Allen-
EB
F,C20GF223J
22, 0'0 ohms, + 5%, 1/2 watt
Bradley
357
RESISTOR, fixedcomposi i
I P% v
10
000
h
0
d b ei
a'se MA8I
IAj-ftB0087
R00020dR0001
RCZOGF103J
,
o
ms, + 5
19, 1/2 wa
j
j
ey
?
SHEET 71
PARTS
S HEETS
LIST
9
 EQUIPMENT (NOME NCLATURE~aar a~~'J:,-@Eas fg3f*1b8 : CIA-RDP81B00878R000200040001-0
NAME 0r Co1 TRACTOR Ramo-Wooldridge Corp-CONTRACT R-W Project 5021
1 2 3 4 5 6 7
SHEET 72 OF SHEETS
PARTS DATA LIST
8 9
IT, EM NO. COMPLETE OESC;IPTIOP OF ITEM C:RCUIT TCQNTkACTOR'S ACTUAL MCC. MFG. TYPE OR !TEMS PER RECOMMENDED QUAN. JAN TYPE
SYMBOL B STACK NO OOF ITEM CTf-PN RO B91110NCMT P R EQUIPMENT
319
RESISTOR, fixeCl, composition,
2200 ohms, + 5%, 1/-2a watt
Bradley
360
RESISTOR, fixed, composition,
value selected on basis of
equipment performance, + 5%,
liz watt
R719
None
I
Allen-
Pra.1ley
EB
1
361
RESISTOR, fixed, composition,
value selected on basis of
equipment performance, + 5%,
1/ 2 watt
Noe
- I
Allen-
-- Bradley
B. 1
1
362
Same as R703
8721
363
Same as R704
R722
364
Same as R705
R723
365
RTSY,3TOR, fixed, composition,
'R7Z4
None f
Allen-
EB
value selected on basis of
equipment pe..iormance, + 5%,
1/ 2 watt
1
Bradley
366 I
367
Same as 1707
Same as 8703
R725 R7Z6
268
Same as 8709
8727
369
Same as R707
8728'
370
Same as 8712 Approve
F&71 1e~
se 1999109/08 : C -RDP81B00878
000200040001-0
 EQUIPMENT (N0 ME N CL AT I) }prove ff 9I7ePA iO b'81CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp. CONTRACT R-W Project 5021
i 2 3 4 5 6
ITEM N0.' C
376
.377
378
379
,PLETE DESCRIPTION OF ITEM
Same as 8711
Same as R713
Same as R712
Same'as R715
R730
R731
R732
R 733
RRESiSTOR, fixed, composition, I R717
9100 ohms, + 5%, 1/2 watt
Stme as R737 R738
Same as R703 R739
Same as R704 R740
Same as R705 R741
380 ? RESISTOR, fixed, composition, R742
value selected on basis of
equipment performance, + 5%,
1/2 watt
MP20191
None
301 Same as R707 R743
382 Same as R703 R744
383. Same as R709 R745
384, Same as R707 R746
385 Same as R712.. R747
386 Same -as R711 R748
387 Same as R713 Approved FoRR40a e 1999/09/08: CI
388 Sams as R712 R750
ACTJAL MFG. . MFG. TYPE GR
OF ITEM J. STOCK NO.
Allen-
Bradley
Allen-
Bradley
SHEET 73 OF SHEETS
PARTS DATA LIST
7 8 9
ITEMS PER RECD 4MENDED QJAN.
EQUIPM`N'i PER EQUIPMENT
RC2CGF912J
 EQUIPMENT (NOMENCLATURE Ilo M 110orR737eOFleaseW SMyys~E
~ p_rovecf F/WA! A : CIA-RDP81 B00878R000200040001-0 SHEET 74 OF SHEETS
NAME CF CONTRACTOR Ramo-Weoldridoe Corp CONTRACT R-W Project 5021 PARTS DATE', LIST
3 4 5 6 7 8 Q
ITEM N0. COMPLETE DESCRIPTION CW ITEM CIRCUIT CON- ACrOR'S ACIUAI. MFG. MC'G. TYPE OR 11 EMS PER RECOMMENDED QUAN JAN TYPE
SYMBOL STOCK NO. OF ITEM STOCK NO. EQUIPMENT PER EQUIPMENT
389
Same as R713
R751
390
RESISTOR, fixed,. composition,
R755
IMIP20158
A11eii-
EB
2
RC20GF12.iJ
12, 000 ohms, + 5%, 1/2 ?vatc
Bradley
'
391
Same as R755
R756
4
392
Same as R703
R757
393
Same as R704
R758
394
Same as R705
R759
395
RESISTOR, fixed, composition,
R760
None
Allen-
value selected on basis of equip-
Bradley
anent peeformance, + 5%, 1/2
watt
396
Same as R707
R761
39-1
Same as 11703 _
R762
398
Same as R709 1
8763
399
Same as R707
R764
400
Same as R7.2
R765
401
Same as R711
R766
402
Same as R713
R767
403
Same. as R712
R768
4C4
Sarre as R715
8769
405.
RESISTOR, fixed, composition,
R773
MP2039 5
Allan-
EB
1
RCZOGF134J
130, 000 ohms, + 5%,, 1/2 ws rove
For Rele
se 1999/09/08: C
-1 878
000200040001-0
 EQUIPMENT (NOMENCLATURE MP10737 OF SYSTEM 1
NAME OF CONTRACTOR Ramo-Wooldridge CorpCONTRACT R-W Project 5021
2 3 4 5 6 7
NO. COMPLETE DESCRIPTION OF ITEM CIRCUIT CONTRACTOR'S ACTUAL MEG. MFG. TYPE OR ITEMS PER
SYMBOL STOCK NO. OF ITEM STOCK NO. EQUIPMENT
406 RESISTOR, fixed, composition, R774 MP20I67 Allen- EB
30, 000 ohms, + 5%, 1/2 watt
SHEET 75 OF
PARTS
SHEETS
LIST
8 9
RECOMMENDED
OMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
RG20GF303J
Bradley
407
Same as R703
R775
408
Same as R715
R776
409
RESISTOR, fixed, composition,
R777
MP20115
Allen-
EB
1
RCZOGFI32J
1300 chins, + 5%, 1/2 watt
. Bradley
410
RESISTOR, fixed, composition,
R778
None
Allen-
EB
1
value selected on basis of equip-
Bradley
ment performance, + 5%, 1/2
w
watt
411
Same as R703
R779
412
Same as R713
R780
413
RESISTOR, fixed, composition,
R781
MPZ0105
Allen-
1
RCZOGF911J
910 ohms, + 5%n, 1/2 watt
Bradley
414
Same as R712
R782
415
Same as R709
R783
416
Same as R712
R784
417
Same as R713 -
R785
418
RESISTOR, fixed, composition,
R788
MP20177
Allen-
EB
I
RCZOGF393J
39, 000 oams, + 5%, 1/Z watt
Bradley
419
Same as R703
R789
Approve
For Rele
e1999/09/08:C1
-RDP81B00878
000200040001-0
 EQUIPMENT (N 0MENC. LATU rovedNFMWa F191 B?8j- CIA-RDP81B00878R000200040001-0
I NAME OF CONTRACTOR Ramo-Wcoldridge Corp CONTRACT R-W Project 5021
2 3 4 5 6
ITEM NO.
COMPLETE DESCR PT10N 41F 1'i EM
I
CIRCUIT
t" SYMBOL
Isis ON RACTOR'S
CK NO.
TACTUAL MFG.
OF ITEM
MFG. TIPE OR
STOCK O.
f i EMS PER
EQU'.PMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYp)E
4Z0
Same as R711
R 790
421
RESISTOR, fixed; composition,
P.791
MP20192
Chmite
EB
4
Ri;LOGF10.J
100 ohms, + 5%, 1/2 watt
422
Same as R703
R792
423
;RESISTOR, fixed, composition,
I R793
MP20379
Alien-
EB
3
RCZOGF473J
47, 000 ohms, + 5%. 1/2 watt
Bradley
424
Same as R703
R794
4ZE
RESISTOR, fixed, composition,
R795
MP20104
Allen-
EB
RC20GFZUZJ
2000 chms, + 5%, 1/2 watt
Bradley
426
RESISTOR, fixed, cor:,positio:i,
R796
MPZG163
Allen-
EB
RCZOGF100J
10 ohms, + 5%, 1/2 watt
Bradley
427
RESISTOR, fixed, composition,
R797
Ncr.e
Allen-
EB
1
value selected on basis of equip-
Bradley
ment performance, + 5%, 1/2
watt a.
428
Same as R791
R798
429
RESISTOR, fixed, composition,
R799
None
Allen-
EB
1
value selected on basis of equip-
`
Bradley
meat performance, + 5%,
1/2
watt
430
RESISTOR, fixed, composition,
R301
None
Allen-
EB
1
value selected on basis of equip-
Bradley
meat performance, + S%Aplp ved
r Releas
1999/09/08: CIA-
DP81B00878R0
0200040001-0
T
watt
SHEET 76 OF SHEETS
PARTS DATA LIST
8 9
 EQUIPMENT (NOMENCLATURE) MP10737 OF SYSTEM 1
WOO
emA-R F, Re ase 1999to
NAME OF CONTRACTOR Ramo- oo ri ge orp CONTRACT - rojec
3 4 5 6
SHEET 77
PARTS D
SHEETS
LIST
9
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
431
RESISTOR, variable, composi-
R802
MP20072
Bourns
120-15-20, 000
2
tion, 1. 250 in. ig x 0. 313 in.
Labs
high x 0.280 in. wide, 20, 000
ohms max, + 20%, 0. 2 watt
432
Same as R791
R803
433
Same as R802
R804
434
Same as R791
R805
435
RESISTOR, fixed, wire-wound,
R806
MP20003
Sprague
Blue Jacket
4
30 ohms, + 5%, 3 watt
436
Same as R806
R807
437
Same as R806
R808
438
Same as R806
R809
439
RESISTOR, fixed, composition,
R815
MP20180
Allen-
EB
RC20GF363,i
36, 000. ohms, + 5%, 1/2 watt
Bradley
440
RESISTOR, fixed, composition,
R816
MP20026
Allen-
HB
1
RC41GF133J
13, 000 ohms, + 5%, 2 watt
Bradley
441
Same as R707
R817'
442
Same as 8711
R818
443
RESISTOR, fixed, composition,
R819
MP20375
Allen-
EB
RCZOGF474'
470, 000 ohms, + 5%, 1/2 watt
Bradley
444
Same as R707
R820
Approved
For Releas
e 1999/09/08 : CI
-RDP81B00878R
00200040001-0
 EQUIPMENT (NOMENCLATURE ' IVIP10737
Release 19qglflqiog OF SYSTEM 1 RUPRIR00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
I 2 3 4
5 6
SHEET 78 of SHEETS
PARTS DATA LIST
8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO,
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
445
Same as R712
R821
446
Same as R707
R822
-147
Same as 8711
R823
448
Jame as R819
R824
449
Same as R707
R825
450
Same as R712
R326
451
Same as R707
R827
452
Same as R7U
R828
453
Same as R819
R829
454
Same as R707
R830
455
Same as R712
R831
456
ELECTRON TUBE, sub-mina-
V701
MP45001
Raytheon
6112
12
tune
457
Same as V701
V702
458
Same as V701
V703
459
Same as V701
V704
460
Same as V701
V705
461
Same as V701
V706
462
Same as V701
V709
463
Same as V701
V710
Approv T
For Rele
se 1999109108: C
A-RDP81 B00878
000200040001-0
 EQUIPMENT
NAME OF CON
I .2
464
467
COMPLETE DESCRIPTION
Same as V701
Same. as V701
Same as V701
Same as V701
4 5
SHEET 79 OF SHEETS
PARTS DATA LIST
OF ITEM
CIRCUIT
CONTRACTOR'S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PEP
RECOMMENDED QUAN.
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
CRYSTAL, enclosed in hermetic-
ally sealed can, 3. 250 in. lg x
1. 250 in. dia, octal base mount-
ing, 1. 000 kc
V711
V712
V7i3
V714
Y701
8JZOSS I 1
Appro'ed For Release 1999109108: PIA-RDP81 B0087PR000200040001
(NOMENCLATURE
TRACTOR Ramo-AWWiRtRMW~
 EQUIPMENT (NOMENCLATURE) MP10406 OF SYSTEM 1
R Ram04*w* t'F*9R1WeaVe0V.PiI C 1A-RQF0BQW BEQQ04000l
ITEM NO.
COMPLETE DESCRIPTION OFITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
469
MP10406 COMPLETE ASSEMBLY
UNIT
MP10406
Ramo-
R-W Dwg.
1 Req. Per
Over-all dimensions 4.56 in. ig
C2
Wooldridge
50403201
System
x 3.50 in, wide x 2.46 in, high.
MP10406 engraved on nameplate.
Consists of the following replace-
able parts and assemblies:
4"0
CASE ASSEMBLY. Formed fro
MP10139
Rarno-
R-W Dwg.
1 Req. Per
0.032 in. sheet aluminum. Over-
Wooldridge
50403209
Complete
all dimensions 4.47 in. lg x 3.41
Ass'y.
in. wide x 2.03 in. high, four
(1/Sys. )
drilled and tapped mounting posts
Black-wrinkle finish.
471
COVER-AND-CHASSIS ASSEM-
MP10080
Rarno-
R-W Dwg.
1 Req. Per
BLY. Over-all dimensions 4.56
Wooldridge
5040201
Complete
in. 1g x 3.50 in. wide x 2.375 in.
Ass'y.
high. Cover formed from 0.032
in. sheet aluminum, drilled for
mounting on the case assembly.
Includes all electrical and mech-
anical components, two perma-
nently-mounted and hermetically
sealed jacks, and a' gasket,.
MP10406 engraved on nameplate.
Black-wrinkle finish.
The following parts of the cover-
and-chassis assembly are replac
able.
Approv
d For Rele
se 1999/09/08
A-RDP81B00878
000200040001-
4 5 6
SHEET 80 OF SHEETS
PARTS DATA LIST
 EQUIPMENT (NOMENCLATURE) MP10406 OF SYSTEM 1
SHEET 61 OF SHEETS
PARTS DATA LIST
479
COMPLETE DESCRIPTION OF ITEM
CAPACITOR, fixed, paper-di-
electric, 1.062 in. lg x 0.562 in.
dia, 0.i :nfd, +10%, 400 vdc w
CAPACITOR, fixed, tantalum,
dry electrolytic, polarized, 1.25
in. 1g ; 0. 875 in. dia, 25 -nfd,
180 vdcw, +200C to -55C operat-
ing temperature
CAPACITOR, fixed, tantalum,
dry electrolytic, polarized, 2.125
in. Ig x 0.375 in. dia, 100 mfd,
50 vdcw, +85C to -55C operating
temperature
CAPACITOR, fixed, flat disc
ceramic, 0.594 in.. dia, 0. 02 mf dl
600 vdcw
CAPACITOR, fixed, flat disc
ceramic, 0.375 in. dia, 0.002
mfd, 600 vdcw
MFG. TYPE OR
STOCK NO.
Vitamin Q
196P10494S4
801-.002
7
ITEN'.5 PER
EQUIPMENT
8 9
RECOMMENCED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURf~ MP1O4
nrnva nr
NAME
OF CONTRACTOR Ramo-Wooldridge CorpCONTRACT R-W Project 5021
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
ACTUAL MEG.
OFITEM
MEG. TYPE OR
STOCK NO.
ITEMS PER RECOMMENDED QUAN.
EQUIPMEtUT PER EQUIPMENT
JAN TYPE
480
DIODE, silicon junction, 1.183 in
CR401
MP55004
Transitron
IN335
1.g x 0.437 in. wide; with solder.
lug anode connection, 10-32
threaded cathode 'connection, and
7/16 in. hexagonal flange. 0.2
amps dc.
431
Same as CR401
CR4C2
482
Same as CF.401
CR403
483,
Same as CR401
CR404
484
FUSE, 1.25 in, lg x 0. 25 in. dia,
F401
MP57001
Littelfuse
313003
L
3 amps, 125 volt, slo-blo.
485
VIBRATOR, 1.50 in. dia x 2.75
G401
MP65001
Airpax
A-500-24
L
in. high, octal base, 26. 5 volts
dc input. Circuit connections
printed on top of case.
486
COIL, rf, solenoid wound, 0. 598
L401
MP40009
Jeffers
10203-20
-1
in. Ig x 0.219 in. dia, 27 micro-
henries, + 10%
487
RESISTOR, fixed, 'composition,
R401
MP20381
Allen-
EB
2
RC20OF200J
20 ohms, + 5%, 1/2 watt
Bradley
488
Same as R401
R402
489
RESISTOR, fixed, composition,
R403
MP20379
Allen-
EB
RC20GF473J
47, 000 ohms, + 5?%Q, 1/2 watt
Bradley
490
Same as R403 Approve
Fob@I a
e 1999/09/08 CI
-RDP81B00878
00200040001-0
4 5
SHEET 82 OF SHEETS
PARTS DATA LIST
8 7 8 9
 EQUIPMENT (NOME NCLATURE)A~proWdd'PgPkeTZsiy19P1d8 : CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Woc,ldridge Corp CONTRACT
I 2 3 4
COMPLETE DESCEJPTION OF ITEM CIPCU1T
S'MBOL
491 TRANSFORMER, power, open--[ TT401 MF70001
l
frame, 1. 50 in. lg x 1. 312 ir. high
x 1. 625 in, wide, 28-volt-center-
tapped primary, 25C-volt-center-
tapped secondary, six 5.0-in. -lg
leads, color coded primary-brow
with black center tap, secondary-
red with orange center tap.
R-.W Project 5021
5 6
Magnecraft
R-W Dwg.
Electric Per
R-W Dwg.
50403214
SHEET 83
SHEETS
PARTS DATA LIST
8 9
ITEMS PER RECOMMENDED QUAN.
EQUIPMENT PER EQUIPMENT
1 -
 EQUIPMENT (NOMENCLATUR rovFo~ORele se 199910908: CIA-RDP81B00878R000200040001-0 SHEET 84 OF SHEETS
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
PARTS DATA LIST
I 2 3 4 5
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQeIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TRPE
492
MP63003 COMPLETE CABLE
W1201
MP63003
Ramo--
R-W Dwg.
2 Req. Per
ASSEMBLY. Over-all les,gth
or
Wooldridge
50400002
System
9, 94 in. Consists of the follow-
W1204
ing replaceable parts:
493
CABLE, Coaxial, Cvermall
MP63013
Arne ican
21-026
1 Req. Per
RG-62/U
dimensions 8. 00 in. 1g :e
Phenolic
Complete
0.242 in, die. 93 ohms.
Assty..
(2/Sys.)
494
PLUG, Coaxial, Over-all
P201 and
MP62014
American
31-012
2 Req. Per
UG-260/U
dimensions 0. 9688 in, lg x
P101
Phenolic
Complete
0.5625 in, .dia.
RIGHT
Ass'y,
or P101
(4/Sys.)
LEFT
Approve
For Relea
e 1999/09/08 : CI
-RDP81B00878
00200040001-0
 IE~UIPMENT (NOMEN :LATVRE) MP63005 OF SYSTEM 1 SHEET 85 OF SHEETS
NAMr. OF CONTRACTOR Ram-,)- ooldridge Corp CONTRACT R-W Project PARTS DATA
I 2 3 A 5 6 7 8
LIST
ITEM NG. COMPL5TE DESCRIPTION OF ITEM j CIRCUIT CONTRACTOR'S ACTUA. MFG. MFG. TYPE OR ft EMS PER RF.COMMFNDED Qi)AN. JAM TYPE
S.'MBOL ISTOCK NO. OF ITEM STOCK NO. . EQUIPMENT PCP. :QU PMEN.T
495
' W12U2 MP63CC5 R
1 R
L
W D
P
'b
E
ama- R-
wg.
3C05 COMPLETE CAB
Mt
ASSEMBLY. Ov,r-all!_cnbth Wooldridge' 50400003
24. 25 in, Consists of t'-ie follow
ing replaceable parte:
496
RECF,PTACLE, Cver-all
dimensions 0. 531 in. lg x
0.562 in, wide x 0.781 in.
high. 7 pin receptacle.
HOOD, Aluminum, Over-
all dimensions 0, 938 in. lg
x 0.655 in. dia. Hood has
0,250 in, cable opening,
P102
RTGH
Viand P102
LEFT
and P402
MPG2017 Winchester
ei
eq.
System
M7S-LS 3 Req. Per
Complete
As s'v,
(3/Sys,)
.115-1116
3 Req. Perl.
Complete
Ass 'Y.
(3/Sys.)
Approv~ For Releise 1999/09/08 : Ck-RDP81 B00878~
 SHEETS
SHEET 86 OF
NAME OF CONTRACTOR Ramo-Wooldridge CorpCONTRAC;T
499
2 3 4
COMPLETE DESCRIPTION OF ITEM CIRCUIT CONTRACTOR'S
R-W Project 5021
MP63004 COMPLETE CABLE I Wi203 MP63004
ASSEMBLY. Over-all length
of 60. ZZ50 in, Consists of the
following replaceable parts:
RECEPTACLE. Over-all P103
dimensions 0. 594 in. lg x- RIGHT
0.469 in. dia. 4 pin and P103
receptacle. LEFT
HOOD` Aluminum. Over-
all dimensions 1.000 in, lg
x 0.562 in. dia. Hocdhas
n,219 in, cable opening.
PLUG,.Connecto . Over- I P1201
all dimensions 2,125 in. lg
x 1.812 in. dia. Plug has
14 contacts. .
CLAMP, Cable. Over-all
dimensions 1.188 in. lg x
l0 375 in. dia,
MP620111 I American APT3106E-20-
Ramo-
PARTS DATA LIST
8
MFG. TYPE OR
ITEMS PER
RECOMMENDF.O QUAN.
.STOCK NO.
EQUIPMENT
PER EQUIPMENT
R-W Dwg.
1 Req. Per
Wooldridge 50400004 System
Phenolic I 27P
3 Req. Per
Complete
Ass 'y.
(3/Sys.)
3 Req. Per
Complete
Ass'y.
(3/Sys.)
1 Req. Per
Complete
Ass 'y.
(1/Sys. )
Req. Per
Complete
Ass 'y.
(1/Sys? )
AN3106E-20-27P
Approved For Relea e 1999/09/08: CI -RDP8IBOO878 R 00200040001-0 '
 EQUIPMENT (N OMEN CL ATUReppromOEDOM1me5'C lfgWa: CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT
2 3
R-W Project 5021
6
MFG. TYPE OR
STOCK NO.
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
ITEMS PER
EQUIPMENT
RECOMMENDED OUAN.
PER EQUIPMENT
JAN TYPE
503
MP63006 COMPLETE CABLE
W1205
MP63006
Ramo-
R-W Dwg.
I Req. Per
ASSEMBLY. Over-all length
Wooldridge
50400005
System
32. 5 in. Consists of the following
replaceable parts:
504
CONNECTOR, Rectangular.
P702
MP62008
Winchester
MRE21S-G
1 Req. Per
Ui 2W 3b/06RG
Over-all dimensions 2. 250 ?
Complete
in. lg x 0.375 in. wide x
Ass'y.
0.859 in. high. Connector
(1/Sys.)
has 21 contacts.
505
HOOD, Connecter. Over-all
MP62013
Winchester
R-W Dwg.
1 Req. Per
dimensions 1. 556 in. lg x
MRE 21H
50401374-1
Complete
2. Z50 in. wide x 0.438 in.
(Modified Per
Ass'y.
high. Two holes tapped 4-40
R-W Dwg.
(1/Sys. )
NC-2. (For P702).
50401374-1;
506
PLUG, Connector. Over-all
P1202
MP62021
Americani
AN3106B-14S-
1 Req. Per
AN3136B-14S-
dimensions 1. 688 in. lg x
Phenolic
5P
Complete
1.156 in. dia. Plug has 5
Ass'y.
contacts.
(1/Sys.)
507
CLAMP, Cable. Over-all
MP62025
American
AN3057-6A
2 Req. Per
AN3057.6A
dimensions 1.078 in. ig x
Phenolic
Complete
0.938 in. dia. (For, Pi202
Ass 'y.
and:P1Z04).
(2/Sys.)
508
PLUG, Connector, Over-all
P1204
MP62015
Americana
AN3106B-145
1 Req. Per
AN3106B-145-
dimensions 1.688 in. lg x
Phenolic
2P
Complete
1.156 in. dia. Plug has 5
Ass ly.
contacts.
(1/Sys.)
Approve
For Relea
e 1999/09/08 CI
-RDP81B00878
00200040001-0
SHEET 87
SHEETS
PARTS DATA LIST
8 9
5F
2:
 EQUIPMENT (NOME NCLATVR0pprd\Ike"sF4 018,: CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Rarno-Wooldridge Corp CONTRACT R-W Project
I 2 3 a
ITEM NO,
509
COM?LF rE DESCRIPTIC;J OF ITEM
_
RING, Bonding. Over-all
dim~nsicns 0.687 in. dia
0.188 in. thic.K, (For P1204)
CIRCUIT
SY}ABOL
CUt~!'i RECTOR'S
STOCK NO.
MP63020
ACTUA16 MFG.
OF ITEM '
Cannon Elec-
tric
STOC MEG. TYPE OR
AN 3111- 3
ITE~~4S PER
1 Req. Per
Complete
Ass'y,
RECOMMENDED QaJAN.
JAN TYPE
AN31I1-3
(1iSys,)
510
PLUG, Connector. Over-
all dimensions 1.688 in. ig
x 1, 250 in. dia, Plug has 5
contacts.
P12C3
MP62030
American
Phenclic
AN31O6B-16 S
-8P
1 Req. Per
Complete
Ass'p.
AN3TObB-16S-8P
511
CLAMP, Cable. Over-all
dimensions 1. 125 in. lg x
1.062 in, dia, (For P1203).
MP63000
-
Anice~ican.
Phenolic
AN-3C57-8A
Req. Per
Complete
Ass 'y.
AN3057.8A
(l/Sys.)
Approv
For Rele
se 1999/09/08 C
A-RDP81 B0087
000200040001-
dop
5
SHEET
88 OF
PARTS DATA
8
SHEETS
LIST
 Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
PARTS-DATA LIST
SECTION Ii
GROUND-BASED EQUIPMENT
Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
 EQUIPMENT (NOMENCLATURE)
NAME OF CONTRACTOR ==
2
199108. GIA 1401281130 78R0002000~10001 0
SHEET
SHEETS
azro-Woold-'id;e Cor.,oraticn CONTRACT R-W Project 30G1 PARTS C'ATE' LIST
COMPLETE DESCRIPTION OF ITEM
MP10.566 OF SYSTEM 1
CIRCUIT
SYMBCL
MPiOr66, COMPLETE ASSEM- .EST
I.'-l,', Over-all cimensons SET
Lb. 65 in, 1; x 22,13 in. vide x
1(. 68 i,l, high. Consists of a
Case-and- Cove- Acsemoly and a
Fiont-Panel and-Chassis Aose-n
I y L7ly.
The Case-and-Cover Assembly
incly-des the following replace-
able parts and assemblies:
CASE. Made from aluminum.
Over-all dimensions 24.34 in, lg
x 18. 30 in. wide x 16.43 in, hio;i.
A rectangular box, open en one
end. Two cover latches on each
side of open end. Two folding
handles on each side, and three
iil.ter honnsings, one on each side
and one on closed end. Mack
wrinkle finish.
LEG, Case, Made from alu mi-
num. Over-all dimensionz O.'250
in. ig x 1.OGO in, dia. One 0.191
in. dia hole drilled through axis
and counter-drilled 0.437 in, dia
x'1.163 in. deep. Blackened,
515 PLATE, Reinforcing. Made
from aluminum. Over-all
dimensions 4, 81 in, lg x O. Cll in.
wide x 0.125 in. thick. O:.e 0, 391
i in. dia hole 0, 40 in, from each
I :ud. Blackened.
Approved F r Release
4 5 _
'
COP!TRACTCR
SiACTUAL MFG.
STOCK NO. I OF ITEM
7
MFG. TYPE OR ITEMS PER
STOCK NO, EQIUI?MENT
Ramo ? -R-W Dwg.
Wooldridge 15040333'i
Ramo-
Wooldrge
R-V6 Dwg.
50403025
1 Req. Per
Complete
Asa ,y,
Remo-
R.-W Dwg.
4 Req, Pe
Wonldriage
50403022
Complet'
Assly
Ramo?
R-W Dwg.
4 Re q. Pe
Wool'iridge
50433029
Complete
As sly.
DP81B00878R00
RECOMMENDED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM L.
NAME
I
R-Vl Proiect 5021
5
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM -
MFG. TYPE OR
--STOCK NO.
ITEMS PER
EQUIPMEr4T
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
F16
FILTER FRAME. Made from
MP10513
Ramo-
R-W Dwg.
3 Req. Per
sheet aluminum. Over-all dimen
Wooldridge
50403040
Complete
sior.Q 14.%")3 in, lg, x 5, 312 in. wide
Ass ?y,
1.00 in, high. A welded frame,
open on one end, Blackened.
5i7
FILTER CARTRIDGE. Made
MP10234
Burke
RMS-1
3 Req. Per
from glass-floss.fibers, Over-
Filter Media
Complete
all dimensions 14.63 in, lg x 5.00
Ass'y.
in, -.-Ade x 0.87 in, thick,
518
DOUSING, Filter. Made from
MP10633
Ran-io-
R-W Dwg.
3 Req. Per
aluminum. Ovea-all dimensions
Wooldridge
50403044
Complete
16.00 in, lg x 6.81 in. wide x-1.43
Ass'y.
in. high. Rectangular shape with
3 groups of 6 louvers, Blackened.
519
GASKETS Filter. Made from
MP10563
Ramo-
R-W Dwg.
3 Req. Per
sheet cork and rubber. Rectang-
Wooldridge
50403045
Complete
,.Aar shape. Over-all dimensions
Ass
15.94 in, lg x 6, 75 in, wide x
0. 032 in, thick. Inside dimen-
sions 15,12 in, lg x 5.93 in, wide,
520
STANDOFF, Filter, Made frown'
MP10563
Ramo-
R-W Dwg.
30 Req. Pe
aluminum. Cylindrical shape.
Wooldridge
50403046
Complete
Overall dimensions 1.255 in, 1?
Ass' yo
x 0.500 in, dia. One 0.159-in, -
dia hole drilled through axis and
tapped #10-32 NF-2 to depth of
0.63 in, at each end. One 0.187
in..dia hole drilled through dia-
meter.O..63-.in,:from one end.
.
Blackened.
Approved
For Relea
e 1999/09/08 CI
-RDP81B00878R
00200040001-0
OF CONTR
ACTOR Ramd-Wooldridge
Corp
CONTRACT
4
SHEET 9o OF SHEETS
PARTS DATA LIST
8 9
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
'A--;ad Far Ra'0290 i0R ? CIA-RDPR1RnnR7RRnnn2nnndnOQI-n
NF,ME 01- L NTRACTOI Rarno- ooldridge Corp CONTRACT R-11I Project 5021
ITEM NO
COM? .ETE )ESCR~P71ON OF ITEM
I
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MEG.
OF ITEM
R MFG. TYPE OR
STOCK NO.
ITEMS FER
EQUIPMENT
~
RECOMMENDED QUAtt
PER EOU'PMEN.T
-
,1,9N TYPE
521
C Z T V Made front aluminum-?
MP10629
,zne~
Ram
R-W Dwg.
1 Req. Per
Rectangular shape. Over- all
Wooldridge
50403026
Complete
dimensions 20.255 in. lg x 16.760
Ass 'y,
in. wide x U. 812 in, high. Two.
suitcase bolts on each side.
inner rim lining of 0.1??5 ino x
0e 125 ino foam rubber, Black-
ened,
522
HANDLE, Folding. Made from
MP10503
Cambridge,
X 2062
4 Req, Pea.
brass. Over-all dimensions
Thermionic
Complete
4.625 ino lgx0.625in, widex
Ass'yo
1.312 in. high. A U-shaped grip
connected at each end by swivel-
pins to 3/8-24 mounting studs.
Approv i
d For Rele
se 1999/09108:
A-RDP81 B00878
000200040001-
_
1 2
5 6 7
SHEETS
LIST
8
9
SHEET 91 OF
PARTS DATA
 ITEM NO.1 COMPLETE DESCRIPTION OF ITEM
CLAIM, Wave Guide, Over-all
dimensions 1. 39 in. lg x 0. 875
in. wide x 0.50 in. high. Rec-
tangular .;lamp with a 0.156-in. -
dia hole located 0.18 in. from
each end. A semi-circular hole
0.750 in. dia x 0.375 in. radius
through the lower half of clamp.
Clamp has a cork-and-rubber
surface. Blackened,
525 CLAMP, Vernier. Made from
aluminum. Over-all dimensions
3.00 in. lg x 0.44in, wide x L47
in. High. Clamp has a 0. 203-in.
dia hole located 0.157 in, from
each end, One end is 1. 00 in,
high for a length of 0.157 in.,
be-eled to 1.47 in, high for
length of 1.250 in., beveled to
1. 00 in. high for length of 0.157
in. Semicircular hole 2.395 in
dia x 1.697 in. radius. Black-
ened,
526
FRONT PANEL AND CHASSIS
ASSEMBLY. Over-all dimen-
sion 18,7451n.-wide x'1,6.25' irk.
high x. ZJ.:5'in, deeps... Consists?
of the following replaeeabie
parts and assemblies;
SUPPORT, Vernier. Made from
aluminum. Over-all dimensions
. 00 in. lg x 3.00 in,. wide x L56
in, high. Support has 0,25-.in...
dia hole in each of four corners,
Appro1
MP10524
MP10631
6 7
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
IRamo-
R- W Dwg,
1 Req. Per
Wooldridge
50403316
Complete
Ass?y.
IRamo.
R-W Dwg.
2 Req. Pe
Wooldridge
50403018
R-W Dwg.
. Complete
Ass 'y .
1 Req. Per
Wooldridge
50403034
Complete
As s'y.
Mp10587 IRamo- R-W Dwg. E1 Req. Per
Wooldridge 50403035 Complete
As sly.
3 4
CT 1'mW`~roject 5Uf1 ------
CIRCUIT I CONTRACTOR'S
SYMBOL STOCK NO.
SHEET 92 OF SHEETS
PARTS DATA LIST
 EQUIPMENT kN0%#NCLATURE) MPT0566 OF SYSTEM I
SHEET 93 OF SHEETS
NAME Or CONTRACTOR harp.- l,ori ge orp CONTRACY R-W Project 5021 PARTS DATA LIST
3
,1 2 3 4 5
I ITEM NO.
Blackened,
drilled through center of supporio
ped 8-32 N-2 to-depth ,f 0.38 Wooldridge 50403035 Complete
--- !_ ___7 _!1 _f PP .
and two 00156-in, -dia holes tap- MP10587 I Ramo ? iL.W Dwg. I Req. Per
SUPPCa1, Vernier, (Cont'd. )
COM?LETE DESCRIPTION OF ITEM CIRCJiT CONTRACTOR'S ACTUAL MFG. MFG. TYPE OR I Ii EMS PER RECOMMENDED QUAN.
SYMBOL STOCK NO. OF ITEM STOCK NO EQUIPMENT PER EQUIPMENT
SPACER, Made from brass.
Over-all demdnsicns 1. 50 ina lg
x 0, 250 in. dia. A hole 0010E ij
c. is drilled througL and tapped
6.32 for a depth of 0, 375 ina
both ends. Cadmium plated.,
PANEL, Front. Made frown
aluminum plate. Rectangular
shape. Over-all dimensions
18. 250 in, 1g x 0.250 in, wide x
16,1889n, high. One rcctangu-
lar hole located 0., 781 in, from
one side, 9,375 in, lg x 6.938
in, wide. Additional aolec for
mounting peters and controls,
Blackened,
PLATE, Chassis.. Made fron
steel. Overall dimensions
20, 00 .in, lg x 0.109 in, wide x
]8. OC in, high, Opposite coraaex
on one side cut out 3,25 in, ig x
0,812 in, wide. One rectangu-
lar hole, located 1, 50 in, from
side, 7, 00 in, ig x 3, 75 in,
wide, Additional holes for
mounting meters and controls.
Cadmium plated,. Appro'
Ramo-
Wooldridge
6 7 8 9
R-W Dug.
50403098
.3 Req. Pe
Final
Ass'yo
MP10591
Ramos
Wooldridge
R-W Dwg,
50403301
1 Req. Per
Complete
MP10515 .
Ramo-
R .W Dwg,
Ass'ye-
I Req. Per
1
Wooldridge.
50403302
Complete
Aas'yd
ease 1999109108 :lCIA-RDP81 B008~
8R00020004000110
 EQUIPMENT (NOMENCLATURE) MP10566 OF SSTEM 1
NAME OF CONTRACTOR '
'ITEM NO. COMPLETE DESCRIPTION OF ITEM
530 AT f EtTUATOR. CCNTP.OY Ass--.n
,
.
I in. lg x 1.375 in, dia. Consists I
of the following replaceable parts:
bly
Over-all di-t ansions 3
18 1
SHAFT, Dial. Made from
stainless steel. Over-all
dimensions 1.88 in, lg x
0.248 in, dia. Shaft is 0.248
in. d-a for a length of '..180
in., a groove 0. 031 in, wide
x 0.015 in, deep, 0. Z46 in.
dia for a length of 0.3G0 in.
and remaind3r of shaft 0.123
in, dia,
HOUSING, Dial-Shalt and
Coupling. Made from alum-
in-sm. Cylindrical shape.
Ove=-all dimensions 1.500
in. lg x 1.875 in, dia. Oae
hole 0.43? in, dia drilled
througa from one end, coun-
terbored 0.4'15 in. 3ia to a
depth of 1.330 in. One hole
0.250 in. dia, drilied
through radially to counter-
bore. Two holes 0.152 in.
dia di?illed through diameter
and counterbored 0.250 in.
dia x 0.250 in, deep and tap-
ped 6-32 NC-2 x 1.50 in.
deep. Blackened.
SHEET 94 OF SHEETS
,F9i ri . 50u1 PARTS DATA LIST
4 5 6 T 6 9
CIRCUIT
SYMBOL
CONTRACeOWS
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. V YPE OR
STOCK NO.
f ITEMS PER
1EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
Woodridge
R-W Lwg,
50403303
1 Req. Per
Complete
I Ass 'y.
533 COUPLING, Flexible. Over-
all e.Lnensions 0.812 in. lg x
0, 562 in, dia. Flexible
coupling C. 433 in. dia atone
end, and 0. 4138 in. di"
For Rele
ruvll~p
Ramos
Wooldridge
Item I of R-W
Dwg. 50403303
Rama- Item 2 of R-W
Wooldridge Dwg. 5040330?
SIC-1947
000200040001-
1 Req. Pei
Asslt,
1 Req. Per
Ass 'y.
1 Req. Per
Ass'y,
 EQUIPMENT (NOMENCLATURE)
MP10566 OF SYSTEM 1
NAME OF CONTRACTOR the k o dmlydRe1 c G iCl/ g ~~(878R~ 0 1
1 2
COUPLING, Flexil.le.
(Cont'd. )
opposite end, One hole 0.138
in. dia through axis of coap-
ling.
RING, Dial-Shalt Retaining.
Made from carbon spring
steal. Over-all dimensions
0.250 in. dia x 0.025 ino
thick. Two clamping holes
0.041 in. dia.
BUSHING, Chassis. Made
from brass. Over-all
length 0. 565 in. One end
flanged, the remainder of
bushing threaded 3/8-32.
Inside diameter 0.255 in.
DIAL. Over-all dimensions
1.612 in. dia x 1.00 in. thick.
The dial consists of two co-
axial dials. The shaft di-
ameter is 0.250 in. Dials
are satin chrome; black-
filled numerals and divisions
Knob and locking lever cap
are black nylon.
ATTENUATOR. Over-all dimen-
sions 2.250 in. lg x 1.625 in.
wide x 1.500 in. high. T-shaped
and has a UG-39/U flanged con-
nector on one end and a UG-40/U
flanged connector on opposite end
Frequency range of 8.5-9.6 KmcA
and an attenuation range of 15 db.
Gray. Approve
3 4 5 6
CIRCUIT
CONTRACTORS
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
Lord
I SK-1947
I Re-. Par
Ass 'y,
U. S. Engi-
neering
helipot
MP6 7501 Microwave
Assoc.
5100-25
Waldes I
Kohinoor
1 Req. Pax
Ass's,;
1 Req. Pc.r
Ass,-
f.
Model RB I1 Req. Per
Duodial Ass 'y.
I Req. Per
Complete
Ass'y.
SHEET 95
SHEETS
PARTS DATA UST
8 9
RECOMMENDED QUANJ
 3
EQ UIPMENT (No MENCLATI oveep6?~e ~-YgR j CIA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR Ramo-Wooldridge Corp CONTRACT R-W Project 5021
CIRCUIT
CONTRACTOR'S
ACTUAL MFG.
MFG TYPE OR
ITEMS PER
SYMBOL
STOCK NO.
OF ITEM -
STOCK NO.
EQUIPMENT
COMPLETE DESCRIPTION OF ITEM
538 'DIAL ADAPTER ASSEMBLY.
Over-all dimensions 3.188 in. 1g.
x 1.875 in. dia. Consists of the
following replaceable parts:
539 ADAPTER, Dial. Made fro
aluminum. Cylindrical shape
Over-all dimensions 1.250 in.
lg x 1. 875 in. dia. One hole
0. 750 in, dia drilled through
axis and chamfered 0.06 in.
deep at each end. Two 0.154
in. -dia holes parallel to axis,
counte.bored 0.250 in. dia x
0.75 in. deep. Two 0.106-in
dia holes parallel to axis,
.tapped 6-32 NC-2 x 0.250 in.
deep. One hole 3.070 in. dia
x 0. 310 in. deep and tapped
2-56 NC-2 x 0.250 in. deep.
One hole 0.125 in. dia x 0.250
in. deep. Blackened.
540 DIAL.' Overall dimensions
1. 812 in. dia x 1. 00 in. thick.
The dial consists of two co-
axial dials. The shaft dia-
meter is'0.,250'in, Dials are
satin chrome; black-filled
numerals and divisions.
Knob and locking lever cap
are black nylon.
Approved FR
MP10501
Ramo-
R-W Dwg.
Req. Per
Wooldridge
50403304
Complete
Ass y,
MP10561 Rarno-
Wooldridge
Helipot
R-W Dwg. I1 Req. Per
50403305 Ass'y,
Model RB I1 Req. Per
Duodial Ass'y.
r Release 1999109108 : CIA-I)P81 B00878R00 f 200040001-0
SHEET 96 OF SHEETS
PARTS DATA LIST
8
RECOMMENDED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1.
NAME OF CONTRACTOR Ramo
COMPLETE DESCRIPTION OF ITEM
BUSHING, Adapter. Made
from bronze. Cylindrical
shape, Over-all dimensions
1.100 'n. lg x 0.750 in. dia,
One hole 0. 500 in, dia throug
1.xis of bushing.
542 j SPACER, Adapter. Made
from aluminum. Cylindrical
shape. Over-all dimensions
0.250 in. lg x 1.875 in. dia.
Two 0.169-in. -dia holes par-
allel to axis and countersunk
0.281 in. deep. Two 0.169-
in. -dia holes parallel to axis.
deep. Blackener'..
bored 0, 750 in, dia x 0.125 in
One hole 0.375 in. dia drille
.through center and counter-
543 + ,SHAFT, Pilot.. Made from
stainless steel. Over-all
dimensions 2.120 in, lg x
0.687 in. dia. One end
flanged 0.687 in. dia x 0.125
in. wide, shaft is 0.498 in.
dia for a length of 1.110 in.,
and remaining length is 0.249
in, dia. One hole 0.257 in.
dia drilled 1.060 in. deep in
flanged end and tapped 5116-
18NC-2 x 1.00 in. deep.
MP10588
Approve For Relepse 1999109108
4000TU
CIRCUIT
CONTRACTOR'S
ACTUAL MF3.
MFG. TYPE OR
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
Ramo-
R-W Dwg.
Wooldridge
50403306
Ramo-
R-W Dwg.
Wooldridge
50403307
Ramon
Wooldridge
SHEET 97 of SHEETS
PARTS DATA LIST
6 7 8 9
ITEMS PER RECOMMENCED QUAN.
EQUIPMEN f PER EQUIPMENT
1 Req. Per
Ass'y.
1 Req. Per
Ass 'y,
R-W Dwg. 1 Req. Per
50403308 Ass lye
A-RDP81B00878 000200040001-
 EQUIPMENT (N OMEN CL AT U Pfi"roved f t t E1MA-RDP81B00878R000200040001-0
NAME OF CONTRACTOR r;'_ze Rarr_o-Wooldridge Corporation CONTRACT
1 2
SFIAFT. Made Fran stainlrss-
steel. Over-all dimensions
?..537 in. lgx0.625 in. dia.
Shaft is spherical on one end.
0.812-in-length of shaft adja-
cent to spherical end is 0.235
in. is dia., flat on two dia-
metrically opposed sides.
Adjacent length of shaft is a
flange 0.125 in. wide x 0.625
in. in dia. Remainder *f
shaft 0.311 in. dia. threaded
5/16-18NC-2.
WASH-ER, Locating. Over-
all dimensions 1.562 in. ig x
0.750 in. wide x 0.0312t in,
thick.
3 4
R-W Project 5021
SHEET 9G OF SHEETS
PARTS DATA LIST
6 7 8 9
CIRCUIT
CONTRACTOR S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.1
JAN TYPE
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
FER EQUIPMENT I
MP10504
Ramo-
R-W Dwg.
1 Req. Pe
Wooldridge
50405309
~
Ass' y.
ielipot R-W Dwg.
(Modified Pe 50403340
R-W Dwg. (Part of Mo
50403340; R L Duodial)
I Req. Pe
Ass'y.
1
Approved F~
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
n.+?r Approved For Release 1999109108 ? CIA-RDP81 B00878R0002000dnnnl-0
NAME OF CONTRACTOR The Ramo-Wooldride Corporation CONTRACT R-W Project 5021
I 2
4 5 6 7
SHEET 99 OF
SHEETS
PARTS DATA LIST
9
JAN TYPE
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
546
LRACKET Assembly. Made
MP10519
Ramo-
R-W Dwg.
1 Req. Per
from steel. Right-angle bracket
Wooldridge
50403312
Complete
Over-all dimensions 6.30 in. lg
Ass'y.
x 0.60 in. wide x 8.80 in. high.
Two mounting tabs rivited at eac
end. Tabs extend 1.0 in. and
are threaded 10-32 NF-2. Cad-
mium plated.
547
ANGLE, 13racket. Made from
MP10502
Ramo-
R-W Dwg.
1 Req. Per
sheet steel. A right-angle
Wooldridge
50403313
Complete
bracket. Over-all dimensions
Ass'y.
6.75 in. lg x 0.69 in. wide x
1.00 in. high. Two 0.188-in. -
dia holes in one bracket face, and
.
two 0.250-in. -dia holes in other
bracket face. Cadmium plated.
548
BRACKET, Klystron. Made
MP10645
Ramo-
R-W Dwg.
1 Req. Per
from sheet steel, A V-shaped
Wooldridge
50403317
Complete
bracket. Over-all dimensions
Ass'y.
7.010 in. lg x 4.750 in. wide x
1.688 in. high. Two 1.120-in. -
dia tube-mounting holes. Four-
teen additional holes for mount-
ing associated components and
for mounting the bracket. Cad-
mium plated.
549
TERMINAL BOARD Assembly.
TB502
MP10525
Ramo-
R-W Dwg.
1 Req. Per
Made from epoxy-glass laminate
Wooldridge
50403319
Complete
Rectangular shape. Over-all
Ass'y.
'dimensions 7.25 in. ig x 1.63 in.
wide x 0.453 in. thick. Four
mounting .-holes 0.125 in. dia.
Nineteen terminals.
Approved F
r Release
1999/09/08 CIA-
DP81B00878R0
200040001-0
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
SHEET 100 OF SHEETS
NAME OF CONTRACTOR 'i'APR k
++;~~ t1 ; O roject 5021 PARTS DATA LIST
COMPLETE DESCRIPTION OF ITEM
POST, T502 Mounting. Made
from brass. Rectangular shape.
Over-all dimensions 2.30 in. lg
x 0.25 in. wide x 0.25 in. high.
Two mounting holes 0.089 in.
dia tapped through 4-40 NC-2D.
One hole 0.089 in. dia x 0. 50 in.
deep drilled in one end and tap-
ped 4-40 NC-2:2 x 0. 38 in. deep.
Cadmium plated.
TERMINAL BOARD Assembly.
Made from epoxy-glass laminate
Rectangular shape. Over-all
dimensions 5. 50 in. lg x 2. 00 in.
wide x 0.453 in. thick. Two
holes 0.125 in. dia drilled in
center of board, four mounting
holes 0.125 in. dia. Twenty
terminals.
POST, TB503 Mounting. Made
from brass. Rectangular shape.
Over-all dimensions 2. 06 in. lg
x 0.250 in. wide x 0.250 in. high
Two mounting holes 0.125 in.
dia drilled and tapped through
4-40 NC-2B. One hole drilled
and tapped through 4-40 NC-ZB
x 0.38 in. deep.. Cadmium
plated.
Approved Ij
2 3 4 5 6 7 8 9
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
Ramo-
Item 2 R-W
2 Req. Per
Wooldridge
Dwg. 50403319
Complete
Ass 'y.
Ramo-
Wooldridge
R-W Dwg.
50403320
1 Req. Per
Complete
Ass 'y.
Ramo-
Item 2 R-W
2 Req. Per
Wooldridge
Dwg.50403320
Complete
Ass ?y.
00000
 EQUIPMENT (NOMENCLATURE) MPiU6on OF S SJ.Eivi i
NAME OF CONTRACTOR The a o- oo ri e orpora on Co
1 2 3 4
555
COMPLETE DESCRIPTION OF ITEM I
BRACKET, Blower. Made from
sheet steel. Rectangular shape.
Ove: mall dimensions 10.75 in. lg
x 3.63 in. wide x 0.0598 in.
thick. Two holes 2.25 in. square.
One hole 0.375 in. dia and twelve
holes 0.250 in. dia. Cadmium
plated.
BRACKET. Made from sheet
steel. Triangular bracket. Over
all dimensions 6.00 in. lg x 0.68
in. wide x 6.312 in, high. One
hole 0.50 in. dia and four holes
0.250 in. dia. Cadmium plated.
RIB. Made from sheet steel.
Overall dimensions 20.00 in.
lg x 3.937 in. wide x 0.626 in.
deep. Channel type chassis with
right-angle bends on each side.
Three oval mounting holes,
thirteen circular mounting holes
ar,d seventeen screw holes.
Cadmium plated.
TERMINAL BOARD Assembly.
Made from epoxy-glass laminate.
Rectangular shape. Overall
dimensions 8.00 in. lg x 3. 38 in.
wide x 0.453 in. thick. Four
mounting holes 0.1 88 in. dia,
eleven holes 0.250 in. dia, and
forty-five terminals.
6
7
SHEET 101 OF SHEETS
PARTS DATA LIST
8
9
CIRCUIT
CONTRACTOR'S(
ACTUAL MFG.
MEG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
JAN TYPE
SYMBOL
STOCK NO. I
OF ITEM
STOCK NO.
EQUI PMENT
PER EQUIPMENT
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50403321
Complete
Ass 'y.
MP10627
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50403322
Complete
As sly.
MP10S21
Ramo<
R-.W Dwg.
1 Req. Per
Wooldridge
50403323
Complete
Ass 'y.
TB504
MP10S35
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50403325
Complete
Ass'y.
Approved For Relea a 1999/09/08 : CI -RDP81BOO878 00200040001-0
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1 SHEET 102 OF SHEETS
NAME OF CONTRACTOR The Rg@o4P%W9 "
fikPJ PARTS DATA LIST
b 2 3 4 5 6 7 8 9
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
557
?3RACKET, Angle. Made tt?orn
MP10l1414
Ramo-
R-W Dwg.
1 Req. Per
sheet steel. Right-angle bracket
Wooldridge
50403326
Complete
Over-all dimensions 1.38 in. lg
Ass'y.
x 1.00 in, wide x 1. 80 in. high.
Four mounting holes 6.161 in.
dia. Blackened.
558
BRACKET, Angle. Made from
MP10526
Ramo-
R-W Dwg.
1 Req. P:r
sheet steel. Right-angle brack-
Wooldridge
50403327
Complete
et. Over-all dimensions 0. 63 in
Ass'y.
lg x 0.50 in. vide x L 63 in. high
Two mounting hcies 0.152 in. d:
Blackened.
559
KNOB. Made from nylon.
MP'-0497
Ramo-
R-W Dwg.
7 Req. Pe
Cylindrical shape. Over-all
Wooldridge
50403328
Complete
dimensions 0.75 in. lg x 0.750
Ass'y.
in. dia. One hold 0.625 in. dia
fora depth of 0.25 in. reduced
to 0.250 in. dia for depth of 0.31
in. drilled axially in one end.
One hole 0.039 iu. dia tapped
4-40 NC-2B for a depth of 0.25
in. driiled radially. Slot in
opposite end 0. a6 in. wide x
0. 06 in. deep.
560
TERMINAL BOARD Assembly. TB501
MP10638
Ramo-
R-W Dwg.
I Req. Per
Made from epoxy-glass laminate
Wooldridge
50403330
Complete
Rectangular shape. Over-all
Ass'y.
dimensions 3.75 in. lg x 3.00 in
widr: x 0.453 in. thick. Four
mounting holes 0.125 in. dia, an
twentymthsee terminals.
Approve for Rele
se 1999109108: C
-RDP81B00878
000200040001'-0
 EQUIPMENT (NOMENCLATURE) Ajae6(F6?3Ri'9k09108 : CIA-RDP81B00878R000200040001-0 SHEET 103 OF SHEETS
NAME OF CONTRACTOR The Razno-Wooldridge Cor o:at.on R-W Project 3021
CONTRACT PARTS DATA LIST
1i 2 3 4 5 6 7 8 9
JITEM NO.1 COty6PLETE DESCRIPTION OF ITEM I CIRCUIT I CONTRACTOR'S ACTUAL MFG. I MFG. TYPE OR1 ITEMS PER RECOMMENDED QUAN.
561 POST, T .501 Mou'iting. Made
from brass. Rectangular shape.
Over-all dimensions 3.50 in. Ig
x 0.25 in. wide x0.25 in. high.
Two holes 0.125 in. dia and tap-
ped 4-40. One hole 0.089 in,
dia x 0.50 in. deep drilled in end
and tapped 4-40 x 0.375 :n. deep.
Cadmium plated.
562
563
564
TERML AL OARD Assembly.
Made from epoxy-glass laminate.
Rectangular shape. Over-all
dimensions 3. 38 in. lg x 2.83 in.
wide x 0.462 in. thick. Two
holes 0. 50 in. dia, four mount-
ing holes 0.138 in. dia, and
eighteen terminals.
BRACKET. Made from sheet
steel. Over-ail dimensions
11.688 in. Ig x 10.562 in. wide x
0.562 in. high'. A chassis brack-
et with .wo morning slots 0.438
in. lg x,6.187 in. wide, with two
mounting slots 0. 375 in. lg x
0, 203 in. wide, and with addi-
tional holes for mounting elec-
trical compoaents. Cadmium
plated.
SPACER, Bracket. Made from
sheet steel. Rectangular shape.
Over-all dimensions 3.50 in. lg
x 0.50 in. wide x 0.064 in. thick.
Two holes 0.250 in. dia, 0.75 in.
from each end'. Cadmium plat
SYMBOL STOCK NO. OF ITEM STOCK NO. (EQUIPMENT PER EQUIPMENT
MP1031;
Ramc-
Wooldridge
Item 2 R-' W--
Dwo.30'1103330
Ree, Per
Complete
Ass'y.
Ramo-
R-W Dwg.
1 Rec. Per
Wooldridge
50403332
Complete
Ass'y.
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50403318
Complete
As sly.
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
5C403358
Ass'y.
JAN TYPE
 EQUIPMENT (NOMENCLATURE)
MP10566 OF SYSTEM I
NAME OF CONTRACTOR The Eno-Wooldridge Corporation
ITEM NO.1 COMPLETE DESCRIPTION OF ITEM
565 TERMINAL BOARD Assembly..
Made from epoxy-glass Laminate.
Rectangular shape. Overall .
dimensions 7.812 in., Ig x 1.781 in
wide x O.125 in. thick. Four
mounting holes 0.125 in. dia. , an
sixty-seven silver-plated eyelets
566 POO'T, TB502 Mounting. Made
from brass. Rectangular shape.
Over-all dimensions 2.00 in,
lgx0.250in. wide x 0. 250 in.
high. Two holes 0.125 in. dig.,
drilled and tapped through 4-40.
One hole 0.125 in, dia drilled
in one end and tapped 4?40 x
0,. 375 in. deep. Cadium plated.
TB507
Rama-
R-W Dwg.
1 Req. Pe
Wooldridge
50403324
Complete
Ass 'y.
MP10414
Ramow
Item 3 R-W
2 Req. Pe
Wooldridg
Dwg. 5040332
Comple
Ass 'y.
567 TERMINAL BOARD Assembly. TB508
Made from epoxy-glass laminate.
Rectangular shape. Over-all
dimensions 4.50 in. lg x 1.31 in.
wide x 0.453 in. thick. Two
clamp mounting holes 0.166 in.
dia, four mounting holes 0.140
in, dia, and ten terminals.
CH=ASSIS Assembly. Made from
sheet steel. Overall dimen-
sions 20.21 n. Ig x 18.06 in.
wide x 16.00 in. high. Eight
holes 2.50 in., dia four on each
side, one rectangular hole 8.69
in. Ig x 2.80 in. wide, one rec-
tangular hole 7.19 in. lg x 2.80
in. wide, and mounting holes.
Cadmium platedo
Ramo- R-W Dwg.
Wooldridge 50403331
I Req. Perj
Complete
Ass'y.
R.amo?
R-W Dwg.
I Req. Per
Wooldridge
50403337
Complete
Ass'y.
-RDP81B00878 000200040001-0
SHEET 104 OF SHEETS
PARTS DATA LIST
8
RECOMMENDED QUAN.
PER EQUIPMENT
9
JAN TYPE
 EQUIPMENT (NOMENCLATURE)
no gone
NAME OF CONTRACTOR -il.e amo- oo ri e orpo::a.io:: -CONTRACT 201ect 5021
I 2 3 4 5 6
SHEET 105
OF SHEETS
PARTS DATA LIST
7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
569
THERMLSTOR Assembly. Over-
MP10496
Ramo-
R-W Drag.
1 Req. Per
all dimensions 1. 515 in. 1g x
Wooldridge
50403338
Complete
1.399 in. wide x 1.314 in. high.
Ass'y.
Consists of the following replace
able parts:
570
MOUNT,. Thermistor. Mad
MP10565
Ramo-
R-W Dwg.
1 Req. Per
from aluminum. Over-all
Wooldridge
50403078
Ass'y.
dimensions 1. 515 in. lg x
1. 000 in. wide x 1. 502 in.
high. A flange 0.125 in.
wide on one end with two
holes 0. 093 in. dia counter-
sunk, two holes 0.039 in.
dia x 0.156 in. deep tapped
4-40 NC-2 x 0.125 in. deep,
-
and two holes drilled 0.089-
-
in. -dia and tapped through
4-40 NC-2. Remainder of
mount is 1. 390 in. lg x 0.578
in. wide x 1.125 in. high.
Four holes 0.089 in. dia
drilled and tapped through
4-40 NC-2. Three holes
0.106 in. dia drilled and
tapped through 6-32 NC-23.
571
INSULATOR. Made from
MP10628
Ramo-
R-W Dwg.
1 Req. Per
mica. Rectangular shape.
Wooldridge
50403339
Ass'y.
Over-all dimensions 1.250
in. lg x 0.875 in. wide x
0.005 in. thick. Four holes
one in each corner, 0.125 in
dia.
Approved F
rRelease
1999/09/08 CIA-
DP81B00878RO
0200040001-0
9
 EQUIPMENT (NOMENCLATURE) MP.10 6 OF S-_-S. 'EM 1 SHEET 100 OF SHEETS
NAME OF CONTRACTOR The R ~R~ q ,a~6ai ~ ! : CItS R 78R oc g r0;021
I
ITEM NO.
PARTS DATA LIST
8
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MEG.
OF ITEM
MEG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
57Z
TERMR AL, Insulated. Over
MP10322
ill. S. Enginee
- 140
2 Req. Per
all dimensions 0.836 in. lg x
(Modified
Ass'y.
0.250 in, dia. Threaded 6-3
Pwr R-W Dw
;
for length of 0.125 in., flang-
;0403480)
ed to 0, 250 in, die. for length
of 0.349 in.
573
THERMISTOR, Coaxial.
RT502
MP20391
F-R Machine
N215A
1 Rect. Per
Over-all dimensions 1.515 in.
'Will'
lg x 1.399 in, wide. x1.814 in.
high. 500-3.0, 500 mc/s.
574
THERMISTOR, Disc. Semi-
RT503
MP20393
Victory
27D1
I Req. Per
conducting disc soldered to a
Engineering
Ass'y.
metal plate and provided with
a wire l' ad. Over-all dimen
sions 1.25 in, lg x 0. 875 in.
wide x 0.312 in. high. Re-
sistance at 250 C, 725 ohms,
+ solo,
$75
THERMISTOR, Disc. Semi-
RT501
MP22066
Victory
28D1
1 Req. Per
conducting disc soldered to a
Engineering
Ass'y.
metal plate and provided with
a wire lead. Over-all dimen
sions 1.25 in. lg x 0.875 in.
wide x 0.312 in. high. Re-
sistance at 25? C, 760 ohms.
Approve
For Rele
se 1999/09/08 : C
-RDP81B00878
000200040001-0
2
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1 SHEET 107 OF SHEETS
NAME OF CONTRACTOR The 1166PdR
$zl
PARTS DATA LIST
2 3 4 5 9
CIRCUIT
CONTRACTOR'S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED OUANJ
N TYPE
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT I
FRAME. Made of sheet alumin-
Ramo-
R-W Dw;.
1 Req. Per
um. Rectangular shape. Over-
Wooldridge
50403314
Complet
all dimensions 10. 63 in. lg x
i
.h.ss'y,
6.13 in. wide x 0.:25 in. thick.
A ccntered rectangular hole
8.875 in. lg x 6.375 in. wide.
Six mounting hoes 0.188 in. dia.
Blackened.
577 -
GASKCET
Made from-s
nthetic
.... . _
R
W fl
R
1
-
.
y
amom
w .
-
Req. Per
rubber. Same size and shape
as FRAME (MP10581',
Wooldridge
50403342
Complete
Ass*y.
ATTENUATOR Assembly. Over-
MP10637
Ramo-
R-W Dwg.
1 Req. Per
all dimensions 4.668 in. lg x 1.3
in. wide. Consists of the
following replaceable parts:
WooldridLe
50403343
Complete
Ass 'y.
ATTENUATOR. Rectangula
MP10562
Polytecsnic
R-W Dwg.
1 Req. Per
shape. Overall dimensions
4.688 in. lgx1.5?.n. wide
x 2 in. high. Four holes
0.50 in. dia, two holes
R&D
(Modified
per R-W
Dwg.
50403315
Ass 'y.
0. 047 in. dia tapped #0-80
NF-Z3 x 0.250 in. deep.
50403315;
580.
KEY. Made from steel.
MP10573
Ramo-
R-W Dwg.
1 Req. Per
Over-all. dimensions 0.062
in. thick x 0.625 in.?dia.
One slot 0.499 in. lg x 0.187
in. wide, two holes O.070
in. dia countersunk.`
Cadmium plated.
Wooldridge
50403310
Ass !f.
Approv d For Rel
IA-RDP81 B0087
 EQUIPMENT (NOMENCLATURE) MP 10566 OF SYSTEM 1
NAME OF CONTRACTOR The ~pKa~c~~d~;~~df z: .. rc;Jzctal
-1 _ 2 " 4 5
ITEM NO.I COMPLETE DESCRIPTION OF !TEM
COAXIAL CABLE Assembly.
Over-all dimensions 8.25 in. 1g
x 0.562 in. dia. Consists of the
following replaceable parts:
CABLE, Coaxial. Overall
dimensions 6.75 in. lg x
0, 375 in. dia.
TERMINATOR, Coaxial
Cable, Over-all dimensions
0. 50 in. 1g x 0.656 in. wide
x 0.484 in. high. Has hex
nut, 0.212 in. accross
facings, on one end. Term-
inator is mounted on a strap
having one hole.
PLUG, Coaxial. Over-all
dimensions 1.00 in. Ig x
0.562 in. dia. Bayonet.
lock plug.
COAXIAL CABLE Assembly.
Over-all dimensions 14.125 in.
lgx0.812in. wide x 0. 812 in.
high. Consists of the following
replaceable parts:
CABLE, Coaxial. Over-all
dimensions 10.50 in. 1g x
0.625 in. dia.
CIRCUIT
SYMBOL
CONTRACTOR'S ACTUAL MFG ,
STOCK NO. OF ITEM
N1Piud J Ramo-
Wooldridge
MP62999 American
Phenolic
MP`a3022
MP62018
MP x2382
6 7
STOCK NO. (EQUIPMENT
R-W Dwg, 1 Req. Per
50403344 Complete
Assay.
1 Req. Per
Ass 'y,
Industrial
Products
1 Req. Per
Ass 'y.
American
Series 3NC
1 Req. Per
Phenolic
31018
Assay.
Ramo-
R-W Dwg.
1 Req. Per
Wooldridge
50403345?1
Complete
Ass 'y.
MP63023 American
Phenolic
I Req. Per
Assay.
SHEET lab OF SHEETS
PARTS DATA LIST
8 9
RECOMMENDED QUAN.
PER EQUIPMENT
RG-58/ U
UG-88 3/U
RG-5/iT
Approvep For RelePse 1999109108 : CIA-RDP81 B00878
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
NAME OF CONTRACTOR T2,ie . mo-Woo1`drid e Corporation CONTRACT P.-W Pro',ect 5021
I 12
COMPLETE DESCRIPTION OF ITEM
3 4 5 6
JACK, Coaxial Panel. Over J304
all dimensions 1. 938 in. lg
s
x 0.656 in. (diagonally accro 11
flange).
PLUG, Coaxial. Over-all
dimensions
~ X1.75 in. lg x
0.812 in. dia.
COAXIAL CABLE Assembly.
Over-all dimensions 7. 375 in. lg
x 0.312 in. wide x 0. 812 in. high.
Consists of the following
replaceable parrs:
CABLE, Coaxial. Over-all
dimensions 4 in. ig x
0.625 in. dia.
TACK, Panel. Same as 13 502
PLUG, Coaxial. Over-all
dimensions 1.50 in. lg
x 0.75 in. dia.
Approv
or
7
ITEMS PER
Series N 11 Req. Per
As sly,
(3/Egp't.
Series N I Req. Per
'ri2-96 Ass 'y.
(1i Egp't. )
R-W Dwg. 2 Req. Per
3040334r,-2 Corrplete
Ass'y.
Series N
82-203
se 1999/09/08 : CPA=RDP81 600872000200040001
I Req. Per
s s'y.
1 Req. Per
Ass'y,
i Req. Per.
Ass 'y.
(6/Eq t.
SHEET 109 OF SHEETS
PARTS DATA LIST
8 9
RECOMMENDED QUAN.JANTYPE
PER EQUIPMENT ,
LTG-21 C/U
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
NAME OF CONTRACTOR The iio ooo{ riiTe Corporation R-W Pro?ect 5021
2 3
ITEM NO. COMPLETE DESCRIPTION OF ITEM
593 COAXIAL CABLE Assembly.
Over-all dimensions 19 ir, lo,
x 0. 75 in. dia. Consists of the
following replaceable parts:
595
596
597
599
CABLE, Coaxial. Over-all
dimensions 17.5 in. 1g- x
0.375 in. dia,
PLUG, Coa;:ial. Over-all
dimensions 1.50 in. lg x
0.75 in. dia,
COAXIAL CABLE Assembly,
Over-all d iaensions 5. 5 in. Ig
x 0.75 in. dia. Consists of the
following replaceable parts:
CABLE, Coaxial, Over-all
dimensions 4.25 in. lg: x
0.375 in. dia.
PLUG, Coaxial. Over-all
dimensions 1.50 in. lg x
0.75 in. dia.
CONNECTO3, Coaxial.
MP62029 Ramo-
Wooldridge
MP63023 American
Phenolic
MP62023 American
Phenolic
MP623S5
R-W Dwg.
1 Req, Per
Complete
50403345-4
Ass 'y.
Series N
1 Req. Per
Ass'y,
1 Req. Per
RG-5/ U
UG-18 C/U
82-203
Ass'y.
1 Req. Per
UG-276/ U
Ass'y.
(2/Egpt, j
4
6
SHEET 110 OF SHEETS
PARTS DATA LIST
8
CIRCUIT
SYMBOL
CONTRACTOR`S
STOCK NO.
1ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
MP62CI9
Ramo-
Wooldridge
R-W Dwg.
50403345-3
1 Req. Per
Complete
Ass 11y.
MP63023
American
1 Req. Per
RG-5/U
Phenolic
As sly.
MP62023
American
Series N
2 Req. Per
UG-18 C/U
Phenolic
82-203
Ass'-f.
Approvef For Rele4se 1999/09/08 : CIli1-RDP8113008781~000200040001-0
 EQUIPMENT (NOMENCLATURE) MP10566 OF S--"S'--'EM I
OF S
00040001-0
NAME OF CONTRACTOR The a :.o-Woold- id-3 Coy ,oration CONTRACT R-W Project 0:1 PARTS DATA LIST
1 2 3 4 5 6 7 8
COMPLETE DESCRIPTION
ITEM
CONT
O.
,
RACTOR S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG ' TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN,
PER EQUIPMENT
600 COAXIAL CA..;LE Assemaly. MP62031 Ramo- R-W Dwa. 1 Rec. Per Complete
Over-all dimensions 13 ii.. la x Wooldridge 50403345-5 Ass'y.
0. 75 in. dia. Consists of the
following replaceable parts:
601 CA:_ILE, Coaxial. Over-all MP63023 American 21-001 1 Reci. Per
dimensions 11.5 in. 1- x Phenolic Ass'y.
0.375 in. dia.
603
PLUG, Coaxial. Over-all
dimensions 1.50 in. lg x
0.75 in. dia.
CONNECTOR, Coaxial.
American
Phenolic
F
Series N
32-203
1 Req. Per
Ass 'y.
1 Req. Per
Ass'y.
SHEET 111 ?
HEETS
RG-5/U,
UG-18 C/U
UG-276/U
Approved For Releas 11999/09/08 : CIA-
, DP81 B00878R010200040001-0
 EQUIPMENT (NOMENCLATURE) - MP10566 OF SYSTEM1
NAME OF CONTRACTOR The Ramo-Woo?drid: Corporatio.i
I 2 3 4
ITEM M.
7
SHEET 122
SHEETS.
PARTS DATA LIST
9
PERMMENDED
COM PLETE DESCRIPTION OF ITEM I SCIRCUIT YAi?OL~ CO 57OCt(C 0.'SI ACTUAL
OF ITEMS ~ MSTO KP{~O.R ~ Ef2Ei1iPMENT I RECO
EOU PMENTAN,
604 IATTENUATOR, Coaxial, S.Z5 in.
1g. x 0. 375 in. dia, coaxial con-
n-6 tot4 at eaeh'ei1d, 20 decibel
1 attenuation.
?605
'606
607
C5C6A
and
C506B
RandD l
610 (CAPACITOR, fixed, hermetic- I C508. MP3006T HopV-ns H Y-THEB.M
11-- ___,,a 1 ,*K .. 1,.. n c[17 !K4104K
MOTOR, dual-bower, single-
phase, 60 cps, 115 vac.
CAPACITOR, fixed, dual-elec- C501A
trolytic, 2.750 Li. Ig x 1.375 ia. and
dia, 20120 mid, 450 vdcw. C561B
CAPACITOR, fixed, hermetic- C503
ally sealed, 1.127 in. lg x 0,400
in. dia, 0.1 mfd, + 10016, 200 vdc
+1Z5C to -55C ope'ting tempera-
ture,
in. dia, 0.1 mid, + 1090, 400 vrc
+125C to -.55C opeFating temper-
atuxe
Approve For Releae 1999/09/08 : C1
MP0'7503 Poiyte;hnic Type 130D
CONTRACT
-RDP81B008781 000200040001.-0
JAN TYPE
 EQUIPMENT (NOMENCLATURE)
MP10566 OF SYSTEM 1
NAME OF CONTRACTOR The r gg ~s~ y
2
ITEM NO. COMPLETE DESCRIPTION OF ITEM
612 CAPACITOR, fixed, electrolytic,
2. 75 in. lg x 1.375 in. dia, 20 mf
400 vdcw
613
614 CAPACITOR, fixed, paper-diel-
ectric, 6.125 in. lg x 2.062 in.
wide x 1.063 in. thick, 5 mfd,
+ 10%, 600 vdcw, +85C to -55C
operating temperature
SHEET 113 OF SHEETS
PARTS DATA LIST
i CIRCUIT
CONTRACTOR'S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
0511
MP33442
I Sprague
SP-CE31-2009
1
615 CAPACITOR, fixed, paper diel- C514
ectric, 5.063 in. lg x 4.750 in.
wide x 2. 312 in. thick, 4mfd,
+ 10%, 2003 vdcw, +85C to -55C
operating temperature
616 ame as C514 C516
617 CAPACITOR, fixed, paper diel- C517
ectric, 3.937 in. lg x 4. 750 in.
wide x 2.312 in. thick, 0.5 mfd,
+ 10%, 1500 vdcw, +85C to -55C
operating temperature
618 CAPACITOR, fixed, hermetically C518
sealed, 2.125 in. lg x 0.750 in.
dia, 1.0 mfd, + 10%, 200 vdcw,
+1250 to -550 s perating.tempera-
619 [Same. as C503
C519
MP33443 Cornell-
Dubilier
MP33444 Cornell-
Dubilier
MP33445 Cornell-
Dubilier
MP33446 I Hopkins
TJH 6050
TJU20040
HY-THERM
IK2105IC
Approve For Relefse 1999/09/08 : CIF-RDP81 B00878:000200040001-0
 EQUIPMENT (NOMENCLATURE)
NAME OF CONTRACTOR The R
~?- ff i Lea o E ~D21
2 3 4 5 6
6L0
622
623
626
627
628
629
CAPACITOR, fixed, paper diel-
ectric, 4.875 in. ig x 2.625 in.
wide, x 1.125 in. thick, 2 mfd,
+ 10%, 1000 vdcw, +85C to -55C
operating temperature
Same as C503
Same as C503
Same as C503
Same as C503
CAPACITOR, fixed, subminia-
ture, paper dielectric, 1. 375 in.
.'.g x 0.400 in. dia, 0.1 mf d, + 201,
400 vdcw, to 85C operating tem-
perature
CAPACITOR, fixed, hermetic-
ally sealed, 0.750 in. lg x 0.235
in. dia, 0.001 raid, + 10%, 600
vdcw, +125C to -55C-operating
temperature
CAPACITOR, fixed, electrolytic,
2. 75 in. 1g x 1.3 9'5 in. dia, 20
mfd, 400 vdcw
AF,ACITOR, fixed, silver mica,
0.688 in. lg x 0.438 in. wide x
0.219 in. thick, 0.001 mfd, +M' S
500 vdcw. Approve
CIRCUIT I CONTRACTOR'S
SYMBOL STOCK NO.
C523
C524
C526
0527
C528
C601
C602
C603
MP38957
ACTUAL MFG. MFG. TYPE OR
OF ITEM STOCK NO.
se 1999/09/08 : CIJ4-RDP81 B00878 T000200040001-0
SHEET 114. OF
-SHEETS
PARTS DP iA LIST
8 9
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
NAME OF CONTRACTOR
The Rf8Y d-% %s n - _ 501
ITEM NO.1 COMPLETE DESCRIPTION OF ITEM
SHEET 115 OF SHEETS
PARTS DATA LIST
3 4 5 6
CIRCUIT
SYMBOL
CONTRACTOR'S ACTUAL MFG.
STOCK NO. I OF ITEM
MFG. TYPE OR
STOCK NO.
630
CAPACITOR, fixed, silver mica,
0.781 in. lg x 0.438 in. wide x
0.219 in. thick, 0.002 mfd, + 5%O,
500 vdcw
C604
MP30063
631
CAPACITOR, fixed, silver mica,
0.812 in. lg x 0.812 in. wide x
0.156 in. thick, 0.003 infd, + 5%,
500 vdcw
C606
632
CAPACITOR, fixed, silver mica,
0, 812 in. lg x 0.812 in. wide x
C607
CM-30-622
0.156 in. thick, 0.0062 mfd, + 5%
500 vdcw
633 (
CAPACITOR, fixed, silver mica,
0.812 in. ig x 0.812 in. wide x
C608
CM-35-912
1
0.344 in. thick, 0.0091 mfd, + 5%
300 vdcw
634
Same as C643
C609
635
Same as C604
C611
636
Same as C306
C612
637
Same as C607
C613
638
Same as C608
C614
639
CAPACITOR, fixed, hermetic-
C616.
MP30067
Hopkins
HY-THERW
ally sealed, 1.125 in, lg x 0.562
1K4104IC
in. dia, 0.10 mfd, + 10%, 400
vdcw, +125C to -55C operating
temperature
7 8 9
ITEMS PER
EQUIPMENT
RECOMMENDED QUA
PER EQUIFMENT
JAN TYPE
Approve
se 1999/09/08 : CIP-RDP81 B008781f000200040001-0
 EQUIPMENT (NOMENCLATURE)
NAME OF CONTRACTOR The
2
ro
o~
otctricig
CIRCUIT I CONTRACTORS
SYMBOL STOCK NO.
643
645
646
CAPACITOR, fixed, hermetically
sealed, 2.125 in. 1; x 0. 750 in.
dia, 1. 0 mf d, + 10%, 200 vdcvi,
+125C to -55C operating tempera-
ture
CAPACITOR, fixed, hermetically
sealed, 0.875 in. ig x 0.400 in.
dia, 0.022 mid, + 10016, 400 vdcw,
+1250 to -55C operating temper-
ature
CAPACITOR, fixed, miniature
electrolytic, 1.063 in. lg x 0.375
in. dia, 50 mfd, 6 vdcw
CAPACITOR, fixed, silver mica,
0.281 in. lgx0.500 in. wide x
0.188 in. tnicic, 20 mmf, + 5%,
500 vdcw
CAPACITOR, fixed, miniature
electrolytic, 1.063 in. lg x 0.375
in. dia, 10 mfd, 25 vdcw
CAPACITOR, fixed, flat disc
ceramic, 0.594 in, dia, 0.02
mid, 600 vdcw
Approve
-RDP81B008781
. 6
000200040001-0
7
SHEET ll6 OF
SHEETS
PARTS DATA LIST
S 9
 3
EQUIPMENT (NOMENCLATURE)
NAME OF CONTRACTOR The
2
ITEM NO.
649
651
656
1W
$y
i
CIRCUIT
SYMBOL
oRrd
ICAPACI"'OR, fixed, silver mica,
0.781 in. lgx0.438in. widex
0.219 in. thick, 820 mmf, + 5%,
500 vdcw
Same as C601
CAPACITOR, fixed, silver mica,
0.781 in. lg x 0.438 in. wide x
0.219 in. thick, 560 mmf, + 5%,
500 vdcw
CAPACITOR, fixed, silver mica,
0.781in. lgx0.438in. widex
0. 219 in. thick, 150 mmf, + 5%,
500 vdcw
Same as C601
CAPACITOR, fixed, silver mica,
0.500 in. lgx0.281in. widex
0.188 in. thick, 50 mmf, + 5%,
500 vdcw
CAPACITOR, fixed, silver mica,
0.500 in. 1gx0.281in. widex
0.188 in, thick, 30 mmf, + 5%,
500 vdcw
Same as C604
C629
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MEG. TYPE OR
STOCK NO.
C631.
C633
C634
C636
NIP30060
CM-20-151
C637
Approve For Rele se 1999/09/08 : C -RDP81B00878 000200040001-0
ITEMS PER
EQUIPMENT
SHEET 117 OF
SHEETS
PARTS DATA LIST
8
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
 EQUIPMENT (NOMENCLATURE) MP 105.6 OF SYSTEM 1
NAME OF CONTRACTOR
2
The i4isfe41Vi1 o [OKM TOM NAV j,ct 5021
3 4
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
ACTUAL MFG.
OF ITEM
MEG. TYPE OR
STOCK
NO.
ITEMS PER
EQUIPMENT
RECOMMENDED OUAN.
PER EQUIPMENT
JAN TYPE
657
CAPACITOR, fixed, plastic film
C633
MP3396l
Plastic
OF30-503
1
dielectric, 2, 25 in. lg x 0.75
Capacitor
in, dia, 0.375 in. 1g. 8-32
threaded connecting studs at each
end, 0.05 mfd, 3000 vdcw
658
DIODE, silicon junction, 0.265
CR501
MP55018
Transitron
IN 34A
13
in. ig x 0.125 in. dia, 1. 25-in. -
throng
except 505,
I
gg aL lead at each .end.
CR513
513)
659
DIODE, silicon junction, 0.265
CR514
MP55020
Hughes
6003
5
in. 1g x 0.105 in. dia, 1.125 in.
through
(except 515)
lg axial lead at each end.
CR518
600
DIODE, germanium, 0.265 in.
CR601
MP55010
Hughes
D;199
2
lg. x 0.105 ii. dia
661
Same-as CR 601
CR602
662
LAMP ASSEMBLY, dial, screw-
DS501
MP59114
Dialight
#81410-112
1
in cap, green convex lens, two
soldering lugs.
663
FUSE, 1.25 in. lg x 0.25 in.
F501
MP57005
Littel?use
Slo-Blo
2
dia, 3 amp, 125 volt
#313003
664
Same as F301
F502
Approve
For Rele
se 1999/09/08 : C
-RDP81B00878
000200040001-0
SHEET 118 OF SHEETS
PARTS DATA LIST
6 7 8 9
 SHEET 119 OF
S SHEETS
NAME OF CONTRACTOR The aPrpiioA oo ri e or)oratio: CONTRACT R-W Proiect 50'1 PARTS DATA LIST
I 2 3 4 5 6 7 8 9
ITEM NO, COMPLETE DESCRIPTION OF ITEM CIRCUIT CONTRACTOR'S ACTUAL MEG. MEG. TYPE OR ITEMS PER RECOMMENDED QUAN. JAN TYPE
SYMBOL STOCK NO. OF ITEM STOCK NO. EQUIPMENT PER EQUIPMENT
665 LCK, power, non-polarized, J501 MP62027 American #61M10
ale receptacl, 15 amp. Phenolic
666 JACK, coaxial, 1.031 in. ig with
J601
MP62032 American Se rie s BNC 2 tJG-290/tJ
.688 in. sq. flange, four 3-56 Phenolic 31-003
ead mounting holes.
I
. 875 in. Ig x 3. 562 in. wide x
.125 in. thick, four 0. 375 in.
g, 8-32 thread mounting studs,
15 henries, 120 ma
J602
666A ame as J601
667 ELAY, ther
50 i 1g (3
in.
a, 9-pin
mi
668 ELAY, elec
:. ~ 1o
s n r
c
s coil
mal, time delay,
086p"gas) x 0. 875 in.
niature base.
tro-magnetic, 4
Itraw,: fl5.aq, 60
p
.
G69 OIL, choke, solenoid wound case
671 ROIL, r-f choke, solenoid wound
EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
15/16 in. lg x 9/32 in. dia, 68
icrohenries, 750 milliainp
Approve
MP68005
MP68G10
MP40017
For Release 1999/09/08 : CI
6N060T
HSM 307
:0404-40
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
NAME OF CONTRACTOR The R?6?-o fie, u21
i 2
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
672
Same as L503
L504
673
Same as L503
L506
674
Same as L503
L507
675
COIL, choke, 1 millihenry 75 ma
L601
MP40023
National
150
2
676
Same as L601
L602
677
COIL, choke, variable, mounted
L603
MP40026
Miller
4413
1
on 1.063 in. lg x 0, 375 in. dia
form, 750 to 1400 microhmnrjr
range.
678
METER, over-all dimensions
M501
MP66501
Roller-
Model TDGR
1
3. f0 in. dia x 2.50 ia. 1g, 200
Smith
microamp movement. Scale
modified to read R.F. WATTS.
.679
RESISTOR, fixed, composition
R501
MP20375
Allen-
HB
14
RC 41GF 474
470, 000 ohms, + 5%a, 2 watt.
Bradley
680
Same as R501
R502
681
Same as 8501
R503
682
Same as R501
R504
Approv
For Rel
se 1999109108:
A-RDP81B0087
000200040001-
683
Same as R501
R506
SNOW
SHEET 120 OF SHEETS
PARTS DATA LIST
3 4 5 6 7 8
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
3 4
6 7
ITEM NO.
COMPLETE DESCRIFTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEt4S PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
684
Same as R501
R507
685
Same as R501
R508
686
Same as R501
R509
&87
RESISTOR, fixed composition,
R511
MPZOO15
Allen-
HB
9
RC. 41 GF 511 J
510 ohms, + 5%, 2 watt
Bradley
688
RESISTOR, fixed wirewouad,
R51Z
MP20050
Sprague
.Koolohm
2
2500 ohms, + 5%, 25. watt
25 NIT
689
RESISTOR, fixed, wirewound
R513
MP20056
Sprague
Koolohm
2
7500 ohms, + 5%, 5- watt.
5KT
690
ESISTOR, fixed, composition,
R514
MP20320
Allen-
EB
3
RC 20 GF 154 J
50, 000 ohms, + 5%, 1/2 watt
Bradley
691
ame as R514
R516
692
Same as R501
R517
693
Same as R501
R518
694
RESISTOR, fixes, composition,
R519
, MP20192
Allen-
GB
1
RC 3OGF 101 J
00 ohm, +5%, 1 watt
Bradley
Approve
For Rele
se 1999/09/08 CI
-RDP81B00878
000200040001=0
8
9
 MP10566 OF SYSTEM 1
NAME OF CONTRACTOR The RapoCaoo rz ee r>>oratzor
4 5
PPoject 5021
6 7
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL h;FG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
695
Same as R511
R 521
596
Same as R511
R322
697
RESISTOR, fixed, composition,
R523
MPZOZ96
Allen-
EB
6
RC LO GF 104 J
100, 000 ohms, + 5%, 1/2 watt
bradiey
698
Same as R512
R524
699
RESISTOR, variable, wirewound.
R526
1vtP20007-
Ohmite
AB
1
1000 ohms, 2 watt
GU ln21
700
RESISTOR, fixed, composition,
R527
MPZ0230
Allen.
EB
1
RC 20 GF 330 J
33 onm, + 5%, 1/2 watt
Bradley
701
Same as R5i1
R528
702
Same as R3U
R529
703
RESISTOR, fixed, composition,
R531
MPZOZ40
Allen-
GB
I
RC 30 GF 133 J
13, 000 ohms, + 5%, 1 watt
Bradley
704
RESISTOR, fixed, composition,
8532
UP20321
Allen-
GB
1
RC 30 GF 512J
5,100 ohms, + k%, lwatt
Bradley
705
Same as Rr5U
R533
Approve
For Rele
se 1999/09/08 : C
-RDP81B00878
000200040001-0
SHEET 122 OF SHEETS
PARTS DATA LIST
8 9
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1 SHEET 123 OF SHEETS
2&e 19991091 R-
NAME OF CONTRACTOR he a -o-Wooldridse Corporation CONTRACT R-W Project 5021 PARTS DATA LIST
( 2 3 4 5 6
7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
706
Same as R511
R534
707
RESISTOR, fixed, wirewound,
R536
MP20049
Sprague
Koolohm
1
10, 000 ohms, + 5%, 5 watt
10 KT
708
Same as R511
R537
709
RESISTOR, fixed, composition,
R538
MP20016
Allen-
1-7 3
1
RC 41 GF 205 J
2 megohms, + 5%, 2 watt
Bradley
710
Same as R511
R539
711
RESISTOR, fixed, composition,
R541
MPZ0017
Allen-
HB
1
RC 41 GF 125 J
1.2 megohms, + 5%, 2 watt
Bradley
712
RESISTOR, variable, wirewound,
R542
MP20057
Ohmite
Type AB
5
100, 000 ohms, 2 watt
(modified per
CU 1041
-W Dwg.
50403329-3)
713
Same as R523
R543
714
RESISTOR, fixed, composition,
R544
MP20020
Allen-
HB
1
RC 41 GF 682J
6, 800 ohms, + 5%, 2 watt
Bradley
715
RESISTOR, fixed, wirewound,
R546
MPZOO18
Sprague
Koolohm
1
35, 000 ohms, 50 watt
0419
Approved
or Releas
1999109108: CIA
DP81B00878R
0200040001-0
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
NAME OF CONTRACTOR The R 9W 6rW M
- o21
7
SHEET 14i
SHEETS
PARTS DATA LIST
8 9
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
CONTRACTORS
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
JAN TYPE
SYMBOL
STOCK NO.
OF ITEM
STOCK NO. i
EQUIPMENT
RFSIS'gOl,,..fixed, wirewound,
Sprague
Koolohm
4, 900 ohms, 5 watt
KT5
RESISTOR, variable, 5,000
Onrnite
Type AB
ohms, 2 watt
mod3fied per
CLU 5021
R-W Dwg.
!0403329-1)
718
RESISTOR, fixed, composition,
5, 000 ohms, + 5%, 2 watt
R549
Allen -
radley
719
RESISTOR, fixed, wirewound,
6, 000 ohms, 10 watt
RESISTOR, variable, 10, 000
Sprague
Ohmite
Koolohm
IOKT
Type; AB
ohms, 2 watt
,modified per
R-W Dwg.
CLU 1031
Same as R514
Same as R523
040 3329 -2 )
Same as It523
Same as R542
Same as R542
R556
Approved For Release 1999/09/08 : CIf-RDP81 B008781J000200040001-0
 EQUIPMENT (NOMENCLATURE) MP10566 OF SYSTEM 1
NAME OF CONTRACTOR
726
3 4 5
COMPLETE DESCRIPTION OF ITEM CIRCUIT rC1_5qTnr1( NTRACTORI ACTUAL N;FG.
SYMRni Nn OF ITEM
RESISTOR, fixed. composition, R559 MPZCZI8 Allen-
4,300 ohms, + 5%, 1/2 vatt I Bradley
728 Same as R542
729 Same as R513
730 Same as R523
731 Sarno as R523
732 Same as R501
I '436 IREMTORL fixed. wirewound. 18572 I MP20065 I Ciixema
ZOO ohms, + 1%, 1/2 watt
73a (Same as R572 I R574
SHEET 125 OF SHEETS
PARTS DATA LIST
6 7 8
MFG. TYPE OR ITEMS PER RECOMMENDED QUAN.
STOCK NO. (EQUIPMENT PER EQUIPMENT
Approvefi For Rele#se 1999/09/08 : W-RDP81B00878F000200040001-
The R ei~kddld ea~4 1l18i6S: CI t 1R94878I3IO0W2Q@84 $)8d-9021
 3
EQUIPMENT (NOMENCLATURE)
MP10566 OF SYSTEM 1
lyiff?yq0cFog1aR
NAME OF CONTRACTOR he
3 4
?Pt?- Sp
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
739
RESISTOR, fixed, wirewound,
R576
MP200G2
!ycor
Type 507A
3
300 ohms, + 1%, 1/2 watt
740
Same asR576
R577
741
Same as R576
R578
742
RESISTOR, fixed, wirewound,
R579
MP20034
Cinema
R-111E
1
150 ohms, + 1%, 1/2 watt
743
RESISTOR, fixed, wirewound,
R531
MP20042
Cinema
R-111E
1
3000 ohms, + 1%, 1/2 watt
744
RESISTOR, fixed, wirewound,
R601
MP20055
Cinema
R-111E
2
50, 000 ohms, + 516, 1/2 watt
745
RESISTOR, fixed, composition,
R602
MP20334
Allen-
E3
1
RC20GF561J
560 ohms, + 5%, 1/2 watt
,radley
746
Same as R601
R603
747
RESISTOR, fixed, composition,
R604
MP20254
Allen-
E3
1
RC20GF632J
6300 ohms, + 5%, 1/2 watt
Bradley
748
RESISTOR, fixed, composition,
R606
MP20213
Allen-
E3
2
RCZOGF43ZJ
4300 ohms, + 5%, 1/2 watt
radley
749
RESISTOR, fixed, composition,
R607
MP20175
Allen-
E3
1
RC20GF514J
510, 000 ohms, + 5%, 1/2 watt
Bradley
750
RESISTOR, fixed, composition,
R608
MP20123
Allen-
EB
1
RCZOGF242J
2400 ohms, + 5%, 1/2 watt
Bradley
Approv
d For Rel
se 1999/09108:
A-RDP81B0087
000200040001-
SHEET 126 OF
SHEETS
PARTS DATA LIST
 EQUIPMENT, (NOMENCLATURE)
MP1056b OF S'~rSTEM I
NAME OF CONTRACTOR i eXR9e o0-0r :~ee o o at:oii -O AC - ode t 0 1
PARTS DATA LIST
T
OF SHEETS
ITEM NO
. COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
RESISTOR, fixed, composition,
R609
Allen-
RC-20;;F131?
180 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
MP20168
:lradley
Allen-
RC20GF244J
240, 000 ohms, + 5%, 1/2 watt
Bradley
RESISTOR, fixed, composition,
MP20130
Allen-
RC20GF106J
10 megohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
MP20296
Bradley
Allen-
RC20GF104J
100, 000 ohms, + 5%, 1/2 watt
Bradley
RESISTOR, fixed, composition,
MP20112
RC20GF391J
756 I
390 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
R616
MP20380
Bradley
Allen-
RC20GF753J
75, 000 ohms, + 5%, 1/2 watt
Bradley
RESISTOR, fixed, composition,
MP20325
Allen-
27, 000 ohms, + 5%, 1/2 watt
Bradley
RESISTOR, fixed, composition,
R619
MP20238
Allen-
200, 000 ohms, + 5%, 1/2 watt
~~radley
R621
RESISTOR, fixed, composition,
MP2017Z
Allen-
300, 000 ohms, + 5%, 1/2 watt
Bradley
RESISTOR, fixed, composition,
R623
MP20119
Allen-
1500 ohms, + 5%, 1/2 watt I
Bradley
SHEE
Approvgd For RelEase 1999109108 : qIA-RDP81B0087qR000200040001-I)
 EQUIPMENT (NOMENCLATURE) MP10566 OF S--.'S'_--EM 1 SHEET 12 OF SHEETS
NAME OF CONTRACTOR 'he -eGlt6@1cIB~ed0a on r p -t
c x021 PARTS DATA LIST
2
3 4 5 6 7 8
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
ACT
O
UAL MFG.
F ITEM
MEG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
RESISTOR, fixed, composition,
MP20133
Alle
n-
RC20GF3023
3000 ohms, + 5%, 1/2 watt
RESISTOR, fixed, composition,
MP20367
r
Alle
adley
n-
RC20GF203J
20, 000 ohms, + 5%, 1/2 watt
r
adley
RESISTOR, fixed, composition,
MP20116
Alle
n-
RCZOGF51ZJ
5100 ohms, + 5%, 1/2 watt
r
adley
Same as R623
Same as R606
R629
769
RESISTOR, variable, wire-
wound, 25, 000 ohms, 2 watt
MP20052
- Ohinite
Type AC
CLU-2531
RESISTOR, fixed, composition,
Allen-
RC41GF203J
20, 000 ohms, + 5%, 2 watt
R634
3 radley
RESISTOR, fixed, composition,
Allen-
RC30GF622J
6200 ohms, + 5%, 1 watt
R637
radley
RESISTOR, fixed, composition,
68 ohms, + 5%, 1/2 watt
Allen-
Bradley
RC20GF680J
Approvgd For ReIE se 1999/09/08 : CPA-RDP81B00878R000200040001-q
 3
EQUIPMENT (NOMENCLATURE)
NAME OF. CONTRACTOR
MP10566 OF S-'--?'STEM 1
-he Apprame` i5okd eleasea899109 o
TP
2 3
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
LAMP, ballast, candelabra base) RT601
6 watt, 125 volt
SWITC =i, toggle, double pole,
single throw, 15 amp, 125 volts
SWITCI_ Assembly, rotary, S507AT'
shorting, , 3 pole, 3 position,
600 indexing
SWITCH A:;serrbly, rotary,
shorting, 2 section, 2 pole, 5
. osition, 3u? indexing
'TRANSFORMER, ;power
TRANSFORMER, power,
ELECTRON TUBE
Same as V501
601AB
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
General
Electric
MFG. TYPE OR
STOCK NO.
MP60009 J. T.
Instrument
MP6001o
Centralab Switch Ass'y.
(Modified Per P-170
R-W Dwg. Indexing
50403355) Ass'y.
PA-2
Sw itch Ass'y.
PA-300
Indexing Ass' -u,
Centralab
(Modified Pe
R-W Dwg.
50403354)
Rayco
Rayco
RCA
V503 I MP47324 I RCA I OB2
Approvel For Rele Ise 1999/09/08 : CI -RDP81B00878 ,000200040001-0
ITEMS PER
EQUIPMENT
SHEET
OF SHEETS
PARTS DATA LIST
RECOMMENDED QUAN.
PER EQUIPMENT
9
JAN TYPE
 EQUI
PMENT (NOMENCLATURE) MP10556 OF SYSTEM 1
SHEET L30 OF SHEETS
a F
CUM
NAME OF CONTR
T
?
!
e
l
AC
OR 2:ne ~
$
o?r re ae
Cororation
CO RACT R-W Pro:e2L : O i PARTS
l
DATA LIST
2 3 4 5 6 7 8
COMP
LETE DESCRIPTION OF ITEM
CIRCU IT
CONTRACTOR'S
ACTUAL MFG.
MEG. TYPE OR
ITEMS PER
RECOMMENDED QUAN
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
.
PER EQUIPMENT
1C0
Sarre as V503
ELECTRON TUBE
RCA
796
Same as V506
ELECTRON TUBE
ELECTRON TUBE
Same as V501
ELECTRON TUBE
Same as V501
Same as V501
Same as V503
Same as V503
ELECTRON TUBE
ELECTRON TUBE
V519
MP45005
Sperry (Mod-
ified Per R-WW
Dwg. 504033UJ
ELECTRON TUBE
V601
MPA5022
Approv
For Rele se.1999109108 : C
 EQUIPMENT (NOMENCLATURE) MP'~0;:5; OF SISTEM 1
SHEET 131 OF SHEETS
NAME OF CONTRACTOR 'Lie. Approv rcReI C$99( U8o1~CIA-~e f}~ 8R0002~0 rope 5021 PARTS DATA LIST
ITEM NO
COMP
9
.
LETE DESCRIPTION OF ITEM
CIRCUIT
CONTRACTOR S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
JAN TYPE
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
799
Same as Vii1
V602
600
ELECTRON TUBE
V603
MP45015
RCA
6U8
1
301
ELECTRON TUBE
V604
MP45032
RCA
2D21
1
ELECTRON TUBE
V606
MP45024
RCA
5670
1
.03
SOCKET, electron tube, 9-pin
XV501
MP47332
Elco
TS102C01
10
304
Same as XV501
XV502
805
Same as XV501
XV503
306
Same as XV501
XV504
307
SOCKET, electron tube, 4-pin
XV506
MP47335
American
146-01
2
Ceramic
303
Same as XV506
XV507
809
SOCKET, electron tube
XV508
MP47342
E. F. Johnson
122-101
1
310' '
SOCKET, electron tube, 8-pin
XV509
MP47345
Elco
TS101COZ
3
811
Same as XV501
XV511
812
Same as XV509
XV512
Approve
For Rele
se 1999/09/08 CI
-RDP81B008781
000200040001 -0
I 2 3 4 5 6 7 8
 EQUIPMENT (NOMENCLATURE) MP103o6 OF SYSTEM 1 SHEET 13Z OF SHEETS
NAME DF CONTRACTOR AFI re*E@r glpage4g9~j89 o;9lALR,8N1R~W8R0R2 ,?o -Q. G21 PARTS DATA LIST
2 3 4- 5 6 7 9 9
ITEM NO. COMPLETE DESCRIPTION OF ITEM CIRCUIT CONTRACTOR'S ACTUAL MFG. MFG. TYPE OR ITEMS PER RECOMMENDED QUAN. JAN
STOCK
NO. OF ITEM STOCK NO
EQUIPMENT P
R
.
E
EQUIPMENT
YPE
TYPE
613
Same as XV501
XV513
:14
Same as XV3O1
XV514
31
Same as XV501
XV516
X16
Same as XV501
XV517
?17
Same as XV509
XV513
Same as XV501
XV511-/
SOCKET, electron tube, 7-pin
XV601
MP47347
Elco
TS1O2C01
3
X20
Sam. as XV601
XV602
. 2i
SOCKET, electron tube, 9-pin
XV603
MP4733Z
Elco
TS103C01
2
22
Same as XV601
XV604
:23
Same as XV603
XV605
623A
METER, frec-,uency, micrometer
M303
MP66504
Microwave
MA-547
1 Rec. Per
dial, two type U5-23/U connec-
Associates
Ass' y.
tors, 2.4 - 4.0 ',.mc frequency
range
323.;
METER, frequency, direct read
M504
MP66508
F-R Machine
X410A
1 Req. Per
ing, type UC-39/U flange, type
Ass'y.
RG-52/U waveguide, 3. 20 to
12.40 lane frequency range
Approve
For Rele
se 1999/09/08 CI
-RDP81B008781
000200040001 -0
 EQUIPMENT
(NOMENCLATURE)
MP10566 OF SYSTEM 1
NAME OF CONTRACTOR y'=1e ~~oFd~seg8991~$olA~a1~~ j - t .021
I 2 3 4 5 6 7
ITEM NO. COMPLETE DESCRIPTION OF ITEM CIRC
I
U
T
CONTRACTORS
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
JAN TYPE
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
324
OSCILLOSCOPE, Cathode-Ray.
MP63320
Tektronix
Model 310
1 Rev
Per
Rectan;ular case. Over-all
.
dimensions 17 in. 13 x 6. 75 in.
Complete
'
wide x 10 in. high. was a 3.00
Ass
y.
in. dia screen and controls mou-
mounted on front panel. Power
requirements 105-125 volts.
glue perforated case.
Approve
For Rele
se 1999/09/08 CI
-RDP81B00878
000200040001-0
SHEET 133 OF SHEETS
PARTS DA
TA LIST
 EQUIPMENT (NOMENCLATURE)
RE-RECORD EQUIPMENT
NAME OF. CONTRACTOR `=he eW6otdWda.%ecI I a
ITEM NO.
2
6IA
COMP
'
g
LETE DESCRIPTION OF ITEM
CIRCUIT
CONTRACTOR
S
ACTUAL MFG.
MFG. TYPE OR
ITEMS PER
RECOMMENDED QUAN.
JAN TYPE
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
PER EQUIPMENT
;Z'
GROUP?D-:'.ASED RE-RECORD
Ampex (Mod
EQUIPMEPi T. A group of units
ified by Ram
-
and interconnecting cables assem
Wooldridge)
bled as shown in figure 1-4 and
figure 1-24 of System 1 instruc-
tion guide (MP10010). The com-
plete equipment includes the fol-
lowing replaceable parts and
assemblies:
o26
MP10;;11, COMPLETE ASSEM- L i
MP10311
Ampex (Mod
OF RECORD-AI D-PLAT ACK
ified by Ramo
AMPLIFIERS AND MOUNTING
Wooldridge)
RACK. Over-all dimensions
25.7:; in. high x 23.5 in. wide x
13 in. deep. Model 350-3P appears
on nameplate of case. Includes
the following replaceable parts
and assemblies:
327
AMPLIFIER, Master Record
MP10306
Ampex
5701R3-1
1
and-Playback
(Modified)
(Modified Per
figure 1-26
and 5-18 of
System 1 In-
struction Gui
,
MP10010 )
2
AMPLIFIER, Slave Record-
MP10116
Ampex
5701R3-3
2
and-Playback.
(Modified)
(Modified Per
figure 1-26
and 5-18 of
System 1 In-
.
struction Cuid
MP10010)
Approve
For Rele
se 1999/09/08 CI
-RDP81B00878
000200040001-0
W 3021
6
SHEET 134 OF
SHEETS
PARTS DATA LIST
8
 EQUIPMENT (NOMENCLATURE)
RE-RECORD EQUIPMENT
NAME OF CONTRACTOR ": 1 8!' oFoQrcRe~e S~~ 9JoQ l 8o1CIA- , -o ac: X321
I 2
In addition to the amplifier parts
listed in the Ampex Operation-
and-Maintenance Manual, the fol-
lowing replaceable modification
parts are used in the amplifiers:
CIRCUIT
SYMBOL
CAPACITOR, fixed, paper C1302
dielectric, 1. 56 in. 1g x 0.62-
in. dia, 2 mfd, 200 vdcw,
700 C operating temperature
CAPACITOR, fixed, paper
dielectric, 0.625 in. lg x
0.31 in. dia, 0.05 mfd, 200
vdcw
RESISTOR, fixed, composi-
tion, 470, 000 ohms, + 5%,
1/2 watt
RESISTOR, fixed, composi-
tion, 1. 5 megohms, + 5%,
1/2 watt
RESISTOR, fixed, composi-
tion, 130, 000 ohms, + 5%,
1/2 watt
SWITC1-i, :at-handle toggle.
Over-all dimensions 1.625
in. lg x 1. 5 in. wide x 0. 5 in.
thick. A SPDT switch.
Approved For Rele
4 5 6 7
CONTRACTOR S
STOCK NO.
MP30.069
MP30034
MP20375
ACTUAL MFG.
OF ITEM
Allen-
_
radley
Allen-
_radley
Allen-
radley
3
H & H; Spe-~
cialists
MFG. TYPE OR
STOCK NO.
1.136
ITEMS PER
EQUI PMENT
e 1999/09/08 : CI#-RDP81B00878 ,000200040001-0
SHEET
8
PARTS DATA LIST
OF SHEETS
RECOMMENDED QUAN.
PER EQUIPMENT
 EQUIPMENT (NOMENCLATURE)
RE-RECORD EQUIPMENT
NAME OF CONTRACTOR The RUHrB-- P~ ~;$@ - affect 5021
ITEM NO
. COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
835
Same as S1301
S1302
836
SWITCH, Rotary. Four pole
S1303
MP60005
Centralab
P123
3
two position switch.
837
MP10920, HIGH-SPEED TAPE-
MP10920
Ampex
5700
1
TRANSPORT MECHANISM (RE-
CORD). Over-all dimensions
17.4 in. high x 23.25 in, wide x
20.5 in. deep. Model 350-3R
appears on nameplate of case.
838
MP10639, LOW-SPEED TAPE-
MP10639
Ampex
5700
1
TRANSPORT MECHANISM (PLA
-
(Modified)
(Modified Per
BACK). Over-all dimensions
-
.figures 1-25
17.4 in. high x 23.25 in. wide x
and 5-15 of
20.5 in. deep. Model 350-3R
System 1 In-
appears on nameplate of case.
truction Gds
MP10010)
In addition to the tape-transport
parts listed in the Ampex Opera-
tion-and Maintenance Manual, the
following replaceable modifica-
tion parts are used in the low-
speed tape-transport mechanism.
839
BRACKET, Capstan-Motor
MP10147
Ramo-
R-W Dwg.
1 Req. Per
Mounting. Made from alum-
Wooldridge
50499020
Ass'y.
inum. Square shape. Over-
all dimensions 2.50 in. lg x
2.50 in. wide x 0.250 in,
high. One hole in center
0.937 in. dia, four holes
Approv
d For Re!
ase 1999/09/08
IA-RDP81B0087
R000200040001-
SHEET 136 OF SHEETS
PARTS DATA LIST
 EQUIPMENT (NOMENCLATURE) RE-RECORD EQUIPMENT
NAME OF
CONT
RACTOR she I~b 8 e@sg
2 3 4 5
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
39
BRACKET, Capstan-Motor
Mounting. (Cont'd.)
MP10147
Ramo-
R-W Dwg.
1 Req. Per
0.218 in. dia countersunk
Wooldridge
50499020
Ass'y.
spaced equally 2.00 in. from
the center at 900. Four hole
0.147 in. dia tapped 10-24
spaced equally 2. 625 in. fro
the center at 450. Blackened
.
340
MOTOR, Capstan.
.1301
MP10640
TECDEV
5630-5C
1
(Modified Per
R-W Speci-
fications)
841
CAPACITOR, Capstan Motor
G1301
MP30066
TECDEV
Part of S630-
1
Starting.
5C Motor
842
MP10404, COMPLETE ASSEMBL
MP10404
Ampex
3741-1
1
OF POWER SUPPLIES (3) AND
MOUNTING CASE. Over-all
dimensions 9. 5 in. high x 14. 5
in. wide x 11. 75 in. deep.
843
IN TERCONNECTING CABLES.
The cables are interconnected as
shown in figure 1-24 of the Syste
1 Instruction Guide (MP10010).
The interconnecting cables are
tabulated below:
844
POWER-SUPPLY EXTEN-
MP63007
Ampex
3814
3
SION CABLE.
344A
BIAS-INTERCONNECT ?bv
For ReI
se?4'l 9 :
A-R S8087
R000 N6O40001-
2
CABLE.
T
T
I
0000
SHEET 137 OF
SHEETS
PARTS DATA LIST
 EQUIPMENT (NOMENCLATURE) RE-RECORD EQUIPMENT
NAME OF CONTRACTOR The a C' - 5021
SHEET 13S OF SHEETS
PARTS DATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
845
POWER-INTERCONNECTIN
MP63010
Ampex
5759-1
1
CABLE.
846
MODIFIED POWER-INTER-
MP63011
Ampex
5759-1
1
CONNECTING CABLE.
(Modified)
(Modified Per
Ampex 5759-1 cable modified
figure 5-17 of
to include W1301 extension
System 1 In-
cable.
struction Geri
,
MP10010)
847
W1301. A two-wire extension
W1301
MP63026
Ramo-
None
1
cable. One end has Cinch-
Wooldridge
Jones S-304-FHT-K connec-
tor. Other end of cable con-
nected to J407P of Ampex
5759-1 cable. Wires join
_
pins 1 and pins 2.
848
PRIMARY-POWER CABLE
MP63012
Ampex
None
1
Approv
For Rele
se 1999/09/08: C
A-RDP81 800878
000200040001-
 EQUIPMENT (NOMENCLATURE) AUXILIARY E;ZUIPMEI:T SHEET 13 OF SHEETS
R oo4dre e st rat or, - rod c 0 1
NAME OF CONTRACTOR ie R
ky"
I 2 3 4 5 6
PARTS DA
7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
349
CA:: .LE, Unit Extension.
W511
MP63017
Ramo-
R-W Dwg,
Wooldridge
50401567
850
CABLE, Test'.- orn Feed. A 5-
W510
MP63014
Ramo-
None
ft. piece of RG-9/U coaxial cabs
Wooldridge
terminated at each end with a
series N UG-21C/U plug.
851
CA=BLE, Test-Set Primary-
W507
MP63015
Tektronix
COP-16-8
Power.
852
CABLE, Unit Cl, Monitoring.
W513
MP63025
Ramo-
R-W Dwg.
Wooldridge
50404081
853
CABLE, Unit D Printed-Circiit-
MP62997
Ramo-
R-W Dwg.
Board Test.
Wooldridge
50401515
Approve
For Rele
se 1999/09/08 C
-RDP81B00878
000200040001-0
TA LIST
 EQUIPMENT (NOMENCLATURE)
NAME OF CONTRACTOR The o- oo d_:a e
-00%14 FAA FAD
I
orr,oration
1 2 3 4
CON
ro; ct 5021
OF SHEETS
PARTS DATA LIST
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
X54
CA=ALE, Unit a Monitoring.
W512
MP63021
Ramo-
R-W Dwg.
Wooldridge
50401539
855
DE-MAGNETIZER, Head.
MP10143
Ampex
704
856
HEADPHONES (2000-ohm impe
MP10505
Trimm
Featherweight
ance).
Headset 104
857
TOOL KIT, Electronic Techni-
MP10190
cian.
858
TOOL KIT, Laboratory.
MP10192
Approve
For Rele
se 1999/09/08 C
-RDP81B00878
000200040001-0
SHEET 140
 EQUIPMENT (NOMENCLATURE)
AUXILIARY EQUIPMENT
NAME OF CONTRACTOR APPIMle#E@T ~a~ 99(p9(Ql Cltb
2
COMPLETE DESCRIPTION OF ITEM
X59 DOLLY, Table Top.
860 TAPE, Measuring. 6 ft. steel.
861. JIG, Test (for Unit L Printed-
Circuit :oard).
862
METER, Tension (0 - 3 oz.).
METER, Tension (4 - 32 oz.).
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
MP10225
WMIRR
ACTUAL MFG.
OF ITEM
Magnesium
Co. of Am.
Ramo-
Wooldridge
MP10207 CARPO
(Dist. by
George
Scherr)
MFG. TYPE OR
STOCK NO.
4 - 32 oz.
Approvtd For Rel t ase 1999109108: I IA-RDP81 B0087fR000200040001-
CARPO
(Dist. by
George
Scherr)
ITEMS PER
EQUIPMENT
SHEET 141 OF SHEETS
PARTS DA
RECOMMENDED QUAN.
PER EQUIPMENT
TA LIST
9
JAN TYPE
 EQUIPMENT (NOMENCLATURE) AUXILIARY EQUIPMENT
SHEET 142 OF SHEETS
NAME OF CONTRACTOR The 5X8f r, or orao CONTRACT R-W P a' ct PARTS DATA LIST
2 3 4 5 6 7
COMPLET
E DESCRIPTION OF ITEM
CIRCUIT
CONTRACTORS
) ACTUAL MFG.
MEG. TYPE OR
ITEMS PER
RECOMMENDED QUAN
SYMBOL
STOCK NO.
OF ITEM
STOCK NO.
EQUIPMENT
.
RER EQUIPMENT
OSCILLA`.kOR, Audio. 5 cps -
=ewlett-
LOOCD
600 l:c. Output 20 Volts (no load]
Paclkard
Internal impedance: 600 ohms
OSCILLOSCOPE. Driven sweep
to 0.1 microsecond per cm.
(Requires plug-in preamplifier).
PREAMPLIFIER, Plug-In.
High gain. Sensitivity: 5mv. /
cm. Frequency response to 9
mc. Used with Oscilloscope
MP10218.
PREAMPLIFIER, Plug-In.
Dual trace. Sensitivity: 0. 05 v.
/cm. Frequency response to
8.5 mc. Used with Oscilloscope
MP10218.
Approved For ReI ; se 1999/09/08: A-RDP81 B0087 , 000200040001-
 EQUIPMENT (NOMENCLATURE) ALMILIARY ' Ip Ei
4pproved For Release 9 ~I09108 CII -RDP81B0087RRnnronnnann01 0
NAME OF CONTRACTOR 's'he Ramo-Wooldriu,e Corporation CONTRACT R-W Projcc 5G21
I
ITEM NO.
FCOMPLETE DESCRIPTION OF ITEM
PRO:E, Oscilloscope. Attenu-
ator.
vOLME'ER, Vacuum-rube.
Frequency response: 20 cps-700
me. Range: 0-300 volts ac and
dc. Input resistance and capacitance: 10 megohms, 1.5 micro-
microfarads.
870 VOL'TMET'ER, Vacuum Tubei,
Measures a-c volts, d-c volts,
resistance, and power level
edb)?
871
METER, Flutter. 0 - 0.5% and
0 --Tiro ranges.
TACHOMETER, Stroboscopic.
3 4 5 6
CIRCUIT
SYMBOL
CONTRACTORS
STOCK NO.
MP10194
ACTUAL MFG.
OF ITEM
Lewlett-
Paczard
General
Radio
MEG. TYPE OR
STOCK NO.
P510A
SHEET 143 OF
SHEETS
PARTS DATA LIST
7 8
ITEMS PER
EQUIPMENT
9
JAN TYPE
Approved For Releate 1999/09/08 : CI)-RDP81B00878RP 00200040001-0
 EQUIPMENT (NOMENCLATURE)
AUXILIARY EQUIPMENT
NAME OF CONTRACTOR The a- ge orparatzan CON RACT R-W Project 5021
I 2 3 4
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
873
METER1 Frequency. Portable.
MP10208
J. B. T.
34 - FP-9M
56 - 64 cps range.
Instrument
874
HORN, Unit Al Test.
MP10405
De Mornay
DDL-S-127
Bonardi
~
875
ff
HORN, Unit AZ Test.
MP10313
Waveguide
(to R-W Spec-
ification)
876
TRIPOD, Test Horn (Modified).
MP10506
Davidson and
Includes Star -D-Conquest: Tri-
Linhof
pod manufactured by Davidson,
and Panoramic Head manufac-
tured by Linhof.
Approved
For Relea
e 1999/09/08 CI
RDP81B00878R
00200040001-0
SHEET
OF SHEETS
PARTS DATA LIST
5 6 7 8
9
 EQUIPMENT (NOMENCLATURE) AUXILIARY EQUIPMENT
NAME OF CONTRACTOR The ?o~ ogrl i~ r ra aa~ CON A T iolec 3021
2 3 4 5 6 7
ITEM NQ.; COMPLETE DESCRIPTION OF ITEM
77 MOL'PL 'a', Unit Al hest-3:worn.
writ A2 Test-Torn.
CONTRACTORS
MP106 i4 Rarno- I R-W Dwg.
Wooldridge 50403352
MP10656 Ramo- R-W Dv..
Wooldridge 50403353
879 KNO , Tape editing. Used with
10-1/2 in. NARTE Tape reel.
REEL, Magnetic Tape. 10-1/2
in. HART:;.
;
SHEET 1 OF SHEETS
PARTS DATA LIST
8 9
RECOMMENDED QUAN,
JAN TYPE
Approved For Rele
se 1999/09/08 : CII -RDP81 B00878 , 000200040001-0
 EQUIPMENT (NOMENCLATURE)
AUXILIAR EQUIPME;
NAME OF CONTRACTOR etyei~6?2ileased~991
2
COMPLETE DESCRIPTION OF ITEM
TAPE, Magnetic. 0.250-in.
wide, 6500-ft. Reels, .0005
Mylar.
TAPE, Magnetic. 0.250-in.
wide, NART3 3600-ft. Reels,
Mylar.
TAPE, Splicing.
884 SPLICER, Tape.
3 4 5 6
CIRCUIT
SYMBOL
CONTRACTOR S
`STOCK NO.
ACTUAL MFG.
OF ITEM
Atdiota --e
Minnesota
Mining
Minnesota
Mining
Robins
Industries
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
Approvtd For Rel t ase 1999/09/08: i IA-RDP81 B0087 R000200040001-
SHEET 1'0'
SHEETS
PARTS DATA LIST
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
 EQUIPMENT (NOMENCLATURE) AUXILIARY EQUIPMENT
NAME OF CONTRACTOR
The R CWebRdleas oli999f 8--: CI e R1W878ROOQQ00d9G01-00 1
I 2 3 4
SHEET 147 OF SHEETS
PARTS DATA LIST
5 6 7 8
ITEM NO.
COMPLETE DESCRIPTION OF ITEM
CIRCUIT
SYMBOL
CONTRACTOR'S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
JAN TYPE
TAPE, Magnetic Tcst.
MP10144
Ampex
6000-A1
36
CEMENT. 7-1/2 oz. Tube.
MP10220
Presstite
Zorlock
Engineering
337
CHEESECLOTH. (10 yd. Roll).
_
MP10219.
888
DESICCANT. (1 fib.)
MP10212.
Socony
Sovabead
Vacuum
889
OIL, Instrument. (4-oz. Bottle).
MP10156
Approve
For Rele
se 1999/09/08 : C
A-RDP81B00878
000200040001-0
 EQUIPMENT (NOMENCLATURE) AUXILIARY EQUIPMEN
NAME OF CONTRACTOR 'r r?~e orl ~ e ra } ec 502.1
SHEET 140 of SHEETS
PARTS DATA LIST
I 2 3 4 5 6 7 8 9
1390
COMPLETE DESCRIPTION OF ITEM
ALCOHOL, Grain. (1 Gal.)
TAPE, Electrical. (1/2 in.
wide.)
'CIRCUIT
SYMBOL
CONTRACTOR S
STOCK NO.
ACTUAL MFG.
OF ITEM
MFG. TYPE OR
STOCK NO.
Minnesota
Mining
ITEMS PER
EQUIPMENT
RECOMMENDED QUAN.
PER EQUIPMENT
Approved For Release 1999109108 : CIA f RDP81 B00878RR
00200040001-0
 Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
PARTS-DATA LIST
SECTION III
NAMES AND ADDRESSES OF MANUFACTURERS
Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
 X1A5a1
Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0
Next 3 Page(s) In Document Exempt
Approved For Release 1999/09/08 : CIA-RDP81B00878R000200040001-0