SCIENTIFIC ABSTRACT BOGDANOV, V. N. - BOGDANOV, V. P.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000205830002-1
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 43
• Document Creation Date: November 2, 2016
• Document Release Date: June 9, 2000
• Sequence Number: 2
• Publication Date: December 31, 1967
• Content Type: SCIENCEAB

16!; 5'_
3/137/62/000/004/182/2DI
A154/Aio.1
AUTHORS: Bogdanov, V.N., De-Millo, P.G.
TITLE: Butt-welding parts with a solid cross-section by the induction
heating method
PFMODICAL: Referativnyy zhurnal, Metallurgiya, no. 4, 1962, 71, abstract
4E399 (Sb. "Prom. primeneniye to'kov vysokoy chastoty v elektro-
termii". M.-L., Mashgiz, 1961, 74 - 77)
TEXT; Work carried out by NIITVCh in welding parts with a solid cross-
section by induction heating war, concentrated on producing 35 x 65, 35 x 75 and
50 x 90 flanges from grade 3 strip steel. The described induction heating
method is based on the use of the "proximity" effect. The inductor is made in
the form of 2 shorted loops, connected on one side by a jumper, on the other side:
the Inductor is connected up to the supply source. The ends of the item to be
butt-welded are placed inside the inductor loops, a certain gap being left be-
tween them. The magnetic flux created by the current ftowing In the inductor
loops in opposite directions induces in the metal ends to be butted currents
flowing in opposite directions to those in the loops, Nit also opposite to each
Card 1/2

Butt-uelding parts with....
S/137/62/00()/O()4/i82/2D i
A154/A101
other. As the current in the surfaces facing each other flows in opposite
directions, it becomes concentrated on these surfaces, due to the proximity
effect, thereby producing intense and fairly even liberation of heat at the weld
between the metals. During the process of expe rime ntat-Ion, the. following main
welding parameters were established: 1. The initial ga,, between the butt ends
should be _3 - 4 mm. 2. The gap between the inductor and %e workpiece should
ensure high efficiency of the inductor and can be taken as 4 - 5 mm. .3. The ups!t~
ting process is characterized by the speed, linear magnitude of upsetting, and
upse-tting pressure, 7he upsetting speed for the examined cross-section should
be >, 15 - 20 mm/sec. The linear magnitude of upsetting should be 4 - 6 mm. For
grade :5 stde-I the specific upsetting pressure can be taken as 4 - 5 kg/cm2. 4.
When welding 35 x 65 mm parts in 30 - 35 seo the power consumed under a hot re-
gime 13 65 kw. With increasing'cross-seation the power consumption and time alao
increase.
V. Tarlsova.
[Abstracter's note: Complete translation]
Card 2/2

BOGDANOV, V.N!j kand.tekhn.nauk; ROMASHEV, D.G., inzh.
Des1pn of flexible shells for "sheet"-type embankments. Trudy
LIVT no.19121-26 '61. (MIM 14:9)
(Embankments) (Sheet piling)

-BDODA.NOVt_V.N., kand.tekhnonauk
Stability of embankments in the form of thin anchored walls.
Trudy LIVT no.19:27-32 '61. (MIRA 14:9)
(Embankments) (Hydraulic engineering)

PHASE I BOOK FMLOITATION SOV/6216
Ilukhanov, Nikolay Famenovich, and Valentin Nikolayevich-,Pogdanov
Svar a metallov pri vysokochastotnom nagreve jHigh-Frequency Weld-
ing of Metals). Moscow, Mashgiz, 1962. 1U9 P. 7000 copies
printed,
Reviewer: A. A. Alekoeyevp Professor; Ed.: K. A. Kochergin, Candi-
date of Technical Sciences; Eds.,of Publishing House: R. N.
Onishchenko and N, Z. Simonovskiy; Tech, Ed.; M. M. Peterson;
Managing Ed. for Literature on the Design and Operation of Machines,
Lehibgrad Department, Mashgiz: F. 1. Fetisov, Engineer.
PURPOMe This book is intended for engineering personnel of machine-
building and metallurgical plants, as well as of scientific re-
search and planning institute3.
COVERAGE: The book reviews physical phenomena utilized in heating
metal with high-frequency current in the welding process. Con-
dition8 for the high-frequenoy welding of various articles are
Card 1/2-

High--Frequency Welding of Metals SOV16216
discussed and designs of welding machines described. Induction
butt welding of tubes and solid sections Is also described, along
With tube making by induction and radiofrequency welding and
other technological processes. No personalities are mentioned.
There are 23 references: 17 Soviet and 6 English.
TABLE OF CONTENTS:
Foreword 3
Introduction 5
Ch. 1. Theoretical Fundamentals of High-Frequency Heating
of Metals 6
1. Flow or alternating current In conductorB.Pbenomenon
of electrical skin effect 6
2. Closeness effect 10
3. Circular or spiral effect 15
4. Phenomenon of electromagnetic induction. Magnetic sicin
effect 17
Card 2/1,

- - A
2
BOGDANGV, V.N., inzh.; PEYSAKHOVICH, V.A., inzh.
UFs of induction heating in the production of sheet steel. Sbor.
trud. TSNIICHM no.28tl97-211 162. (MIRA 15:11)
(Tin plating) (Induction heating)

TIKHOMIROVP V.I., doktor khim. nauk; GORBUNOV, S.A., inzh.; FFDOROV,
A.K., inzh.1 BOGDAf_NiO-_vh,---vv!.'.N kjnzh.
Character of nonmetallic inclusions during the buLt.
of pipe heated by high-frequency currents. Svar. proizv.
no.11:10-12 N163. (MIRA 17-.~)
1. Leningradskly ordena Lenina gosudarstvennyy universitet
imeni A.A. Zhdanova (for Tikhomirov, Gorbunov). . NaLchno-
issledovatel'skiy institut tokov vysokoy chastoty im.
V.P. Vologdina (for Fedorov, Bogdanov).

BOGDANOVp V.N.; LIFNITSKP' A.M.; RUSSIYAN, S.V.; SURDLOV, V.I.;
"O"~'~-HPANOV, N.P.; VYSIIEMIRSKIY, M.N., in7,b.$ retsenzent
[Design of Ailly mechanized automated iron foundries] Pro-
ektirovanie kompleksno mekhanizirovannykb i avt=atizirovan-
nykh chugunoliteirykh tsekhov. Pod red. S.V.Russiiana.
Moskva, Mashinostroenie, 1964. 322 p. (MIRA 17:10)

ACCESSION NR: AP4029388 8/0135/64/000/004/0030/0031
AUTHOR% ' D'yachkov, If. 1. (Engineer) Fedorov, A. X. (Engineer); Bogdanov, V. W.
.(Engineer); Tikhomircrv, V..I:. (Doctor of Chemical Sciences)
TITLE: A method of protecting* seem from oxidation in welding pipes by high fro-
quency currents
S01MCE: Svarocbnoye proizvodstvo, no. 4, 1961F, 30-31
TOPIC TAGS% oxidation, welding, high frequency current, cellulose, nitrocellulose,
cellophane
ABSTRACT: The authors included a means of supplying a heated surface with organic
substances, with which the products of thermal dissociation combine oxygen in stable
chemical compounds, thereby avoiding metal oxides in the weld scams which lower the
mechanical strength. This may be accomplished by a gas mediumi formed by the dis-
sociation products of --ellophane and nitrocellulose. This medium has good protectiva
properties and does not cause carbonization of the metal in the heating zone. The
authors conclude that the best regime for welding No. 10 and No. 20 pipes with high-
frequency currents (indgetion heating) with the above -mentioned protective media is
by heating to 1280-1300 C after first dressing the surfaces to be welded. The
:Card 1/2

ACCESSION NR:' AP4029388----'----
amount of the protective material must not be too great@ Origo art* hast 2 figures
ASSOCIATION: NIITVGh im. V, P. Vologdina
SUBMITM: 00 DATE ACQ.- 28APr64 ENCL: 00
NO PEP SOV: 002 OTHER:. 000
CODE: NL
Card

MARSHAROVY I.K.; B)GDAIJOV, V.N.
Mechanism of the dissolution of copper and brass in concentrated
inorganic acid solutions. Izv. vys. ucheb. zav.; tsvet. not. 7
no.6:116-120 164. (MiRA 18:3)
1. Voronezhskly gosudarstvennyy universitet, ha-~edra fizicheskoy
khimii.

. k-! i ~ ,
, t!. V.N.
1
7 1 . * -, " I ~l
~. i~r, i.ng fo,.)n -d r i r -, !:it nil Is :~-' ;im ' - .: - --- -. , ; ~ -,
1 1. t, L rt 11, v. rc,.'! , j.: -19 Y! 16 " I ( .: ~ i~; - ~ " 1
i~ . - ! 4.

BOGDANOV, WDONSKOrp I V, doktor ~ekhn. naul , retsenzent;
-7 1, A.A.1karid, tekhn. naukp rod.
[High-froqusnoy uelding of metals] Vyookoobastotrialft
evarka motallov, Pod red. A.A.Fogs)ia. Moskyap Machino-
stroonie,p 1965, 65 po (Bibliotechka vynokochastotnika
tormiota, no,13.) (MIRA 191l)

(3 c, (,. o /) t,)o V, v), N,
TITKOV,V. I.; BOGDANOV,V.'11.; KAMOV,A. 1.
---------
,Uctiou of p9trolauu tank farms] Proektiravanie
[planning and constT
i stroital'stvo neftebas. Moskva, Goo.nauchno-tekh. izd-vo nef-
tianoi i gorno-toplivnoi lit-ry, 1953. 424 p. (MIRA 8:9)
(Petroleum-Storage)

AID P - 2728
Subject USSR/Engineering
Card 1/1 Pub. 78 - 25/27
Autbor Aranov.1ob, D.
Title Titkov, 'V. I., Boldanov I. It. and VmXtarov, k. 1.
Proyektizovanlye I stroftel,srvo neftebaz planning
and building of oil-bases 1953 (Review)
Periodical t Neft. khoz. V. 33, #6, 92-94, Je 1955
Abstract The reviewed book deals with all the aspects of
planning oil depotessmall and large, and in its
second part treats construction materials. and
building procedures, also plans of various types
of oil storage and tanks.
Institution : None
Submitted : No date

Z' t' e~'-
V, Aj,
15-57-1-1052D
Translation from: Referativnyy zhurnall Geologiya, 1957, Nr 1,
p 168 (USSR)
AUTHOR: Bogdanov, V. N.
TITLE: S Ana---I
tability Analys -s of Sloping Soil Masses (Analiz
ustoychivosti zemlyanykh mass obkosnogo profilya)
ABSTRACT: Bibliographic entry on the authorts dissertation for
the degree of Candidate of Technical Science,
presented to the Leningrad Engineering Institute for
Water Transportation (Leningr, in-t inzh. vod. trans.),
Leningrad, 1956.
ASSOCIATION: -Leningr. in-t inzh. vod. trans. (Leningrad Engineering
Institute for Water Transportation)
Card 1/1

GLUKHANCV., Nikolay Panienovich.;-~~-Yjamtin-Niko2ayevich;----
AISKSEYEV, A.A... prof.., retsenzent; KOGMG1F, K.A.., kand,
. tekhn. nauk.. red.j ONISHCHENKO, R.N.j, red. izd-va; SDDNOVSKIY
N.Z.., red. izd-va; PETERSON.. M.M.., tekhn. red.
(Welding mete-Is with high-frequency heating]Sverka metallov
pri vysokocbaeUtnom nagreve. Moskva,, Masbgiz91962 189 P.
(KMA i5s.11)
(Metals-Welding) (Induction heating)

BOGD4WV,_-Y,,~,, insh.; ZUBAROV, D.L.p insh.
Using high-strength cast iron in shipbuilding. Sudostroenie, 29
no.6s57-59 Je 163, (MIRA 16:7)
(Shipbuilding materials) (Cast iron)

S NO REr SOVI.-7,000- OTHERt ON

~,BOGDANOV, V.P,__.
Use of blimetal tubes in shipbuildingo Sudostroenie 26 no. 3-1:55-
58 N 16o, (MIRA 101)
(Marine pipe fitting) (Tamirmted metal)

WWARTH, L., editor; BUNIMOVICH, A.I.[ translator] ; VISHERMSKff, S.L.
[translator]; TZLISNMA, Tu.B. [translatorh CEEM, G.G.,
redaktor; BOGDANOT, V.P., tekhnicheskiv rodaktor
[Modern developments In Cluill dynamics; high speed flow. Translated
from the lInglish] Sovrsuennoe sostoianis aerodinamiki bol'shikh
skorostsip Pereyod's angliiskogo A.I.Bunizovicha. S.L.Fishnevetskogo
i IU,B.Iliseeva, Pod red, G.G.Chernogo. Moskva, Izd-vrj Inestrannoi
lit-ry. Vol.2. 1956. 382 p. (XI2A 9:7)
(Iflui& dynamics)

BOGUNOV, V.P.; FAVOROV, B.P., Jnzb.
WON"*m"
Introduction of plastics into shipbuilding, Sudostroenie 27
no.2:53-55 F 161 - (MIRA 16t7)
(Shipbuilding--~Bquipment and supplies)
(Plastice)

BCGD,AI-.,OV3, 'Viadimir Favlovich; FAYOROV, B.P.. *nzh., re-~Senzent,:
~M .- t; 1, E1711.4, I.-D" rea.
;I E , retsenzen
[Ecunorw of nonferrous metals in shipbuildim! (in the design
of ship systems and piping)] Ekonomiia tsvetnykh metallov v
sudoE.troeiiii (pri proektirovanii. sudovykil sister.-I i trubopro-
vodov). Leningrad, Sudostroenie, 1965. 129 p.
(I'll"'uti 1-8:9)

BOGDANOV,,. V.P.
%Nmnm~
Method of determining the mobility of foreign bodies in the bronchi.
Vest. otorinolar. go.3:74-75 Kay-June 50. (wa ig..4)
1. Of the IM (Otorhinolaryngologicsl) Clinic (Head - Prof. A.I.
Geshelin) of Odessa Medical Insitute.

BOGWOVg V. P.
Modifications of the auditory organ in hypertwwion.
Test, otorinolarop Moskva 13 no*'3 :22-26 Sept-Oat 19539
(GIKL 25:3)
1; CwAidate NedUal Goiences. 2. Of the Clinic for
MUmmiss of the Urp Throat, and Nose (Acting Be&d -
Docent M,I. Garihin), Odessa Medical Institute.

DOGWOT Ve.p'-
Modification of laryageotovW In neoplastle illsomme
Test. arlmlar. Moskva 15 no,6:6_3-67 *19V,,-Mft1q53.
(Gin Z50)
1. . CmAidate Medical Solances. 2, Of the Clinic for
Useasem of the Xar, Tbroat. and lose (Aating Elead --
Dooent M~. .1, Aarshin), Odessa Medical Institute,

BOGDANOT, V.P., kandidat meditsinskikh nauk
Method of repair of lar7ngo-tracheal stoma. Vest.oto-rin. 18 no.3:
47-49 Xy-Je 156. (MI2A 9:8)
1. Iz kliniki bolezney nkha, gorla i nosa (i.o, zav. kafedroy -
dotsent M.I.Garshin) Oiesekogo meditainskogo institute, imeni
N.I.Pirogova
(IARYIIX. - 'surgery,
lar7ngotrachooetom.v. covering of stoma (Rus))
(TRLCHRL, surgery,
. same)

KkVUMI,, YeImtorina Daitzriyevniq INDRMVI, A. P.; BOGMINOV, V. P.
*Some properties and thi structure of a glucosamine-aspartic
fragnent from ovalbwrdn.0
Report to be submitted for the 3rd Intle Symposium on the Chemistry
of Natural Products (IUPAC), Kyoto., Japonp 3.2-18 April 1966

MAMHAKOVI I.K.;,-4QGDANOV. V.P.
1-1--,",
Mechanism of the selective corrosion of copper-zinc alloys.
Zhur, fiz, khim. 37 no.12t2767-2769 D 163. (HIRA 17tl)
1. Voronezhskiy gosudarstvennyy universitet.

Selecting the optimum parameters of the damper of vertical
vibrations of higb-spoed. electric locomotives . Trii+.r TE ITZHT
3070-65 162.
Determi-ning the generalized disturbing forces acting upon
the ChS2(type 259) electric locomotive during the movement
on a track with joint-oonnected rails. Ibid.: 86-92
(MIRA 1618)

KAVERZNEVA, Ye. D.; BOGDAN01r, V. P.; ANDREYEVA; A. P.; SHKIKOVA, F. V.
"The chemical bond of the polysaccharide-prosthetic: group in ovalbumin, and
the situation of this troup in the protein molecule."
report submitted for Natl Mtg, American Chemical Society, Philadelphia, 5-10
Apr 64.
Inst of Organic ChemistrT, Wscow

MARSHAKOV, -11,Y.;-PP,~,I)AN~PY, V.P.
Corr lon ara ele~ of all, Y,.. --he ccl-.qL--r--z~-nc-
Part ;Ll. Zi: 38
J!T
_RA ~Fz])
(,ox- ~'sicn and electrocherni-~al behavior of ailoys Lhe corFer-zin2
sysleme Fart, 3. lbld.,.-II915-191"cl
-';. l'-lrcra3nnld'.y gosuclarstw-rinjy ur.-Jve.,-F:];' "et.

ZP
51'

- --- - - -- _____j
I -BOGDANOV, V. P., KAVERZNEVA, YF.. D., and TSEE DE-FAN (USSR)
"A Study on the Carbohydrate-Poptide Fragment from Ovalbumln,u I
Report presented at the 5th International Biochemistry Congress,
146scow, 10-16 Aug 1961

KAVERZNSVAt Ye.D..; 'BOGDANOV9 V.P.
Isolating from egg albimip~ a.fragment consisting of a polysaccharide
and aspartic acid, Bickhimila, 26 no. L105-109 Ta-F 161.
(MIRA 14:2)
1. Institute of Organic Chemistryl Academy of Sciences of the
U.S.S.R. Moscow.
(AISUMIN) (POLYSACCHWDES) (ASPARTIC ACID)

KAVERZNEVA, Ye.D.; BDGDANOV, V.P.
Improved method for separating the aspartic-polysaccharide fragment
from ovalbumin and some of its characteristics. Biokhimiia 27
no.2:273-278 Mr-Ap 162. (MIRA 15:8)
1. Institut or anicheskoy khimii AN SSSH, Moskva.
(ALBUMM (POLYSACCURIDES) (ASPARTIC ACID)

BOGDANOV, V.P. , ililkh.
Using the el6etronic analog computer for studying the ve-rti'cal
xibrati6ns of a'hlgh-spo-ed electric locomotive. Trudy MIIT
no.135:58-65 161. (MIRA 15:1)
(Electric locomotives-Vibration)
(Electronic analog compubero)

BOGDkNOV V P insh. (Tomsk); MKHEYEV, V.P. (Tomsk); POPOV,, V.P. (Tomsk)
===:=L~
"Plastioa im railroad transportation" by I.P.SitkovskU,
Reviewed by V.P.Bogdanov, V.P.Mikhoev, V.P.Popqv. Zhel.dor.-
no.4:95-96 9 162. (NM 15311)
(FIS13tio4) (Railroada--EquipmeAt and supplies)
(Sitkovakii, I.P,.)

FEDEL Vladimir Borisovich. Prinimal uchastiye GRIGORIYEV, Ye.T.,
inzh.; PAKHOMDV, M.P., doktor tekhn. nauk.. retsenzent;
DANOY V F kand. takhn.nauk, retsantent; LISOVSKIY,
A.S.? e i. nauk; KROVORUCHKO, N.M., insh., red.;
VOROTNIKOVA, L.F.,, tekhn. red.
(Design of the mechanical part of electric rolling stock]
Proektirovanis makhanichaskoi chasti elektropodvizhnogo
sostava. Moskva, Tranotheldorizdat, 1963. 422 p.
(MIRA 16:10)
(Electric railroads-Rolling stock)

MARSHAKOV, I.K.; BOGDANOV, V.P.; ALEYKINA, S.M.
Corrosion and electrochemical behavior of alloys of the copper -
zinc system. Part 1. Zhur. fiz. khim. 38 no.7:1764-1769 i1 164.
OURA 18:3)
1. Voronezhakiy gousdarstvennyy universitet.