SCIENTIFIC ABSTRACT V.M. CHERNYKH - V.I. CHERNYSH

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000308620016-5
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: June 12, 2000
• Sequence Number: 16
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

CHEi-dffiffl, V.11. (Fosk,,ra)
Method for staining of sections of burned skin. Arkh.
pit. 21
no.9:7-3.,74159. (141M 14: 8)
(SKIN) (STAINS AND STAINING (MIGROSGOPY))

ACC N1,
AR6036288 SOURCE CODE: UR/0285/66/000/009/0019/0019
A1JT1-1OR:__C.hernykh, V. N.
TITLE: Use of acoustic vibration energy for the atomization of liquid
fuel
SOURCE: Ref. zh. Turbostroyeniye, Abs. 9.49.118
REFSOURCE: Sb. tr. Leningr. in-tinzh. zh.-d.-transp., vyp. 246, 1966,
85-90
-nni-I A
TOPIC TAGS: atomization, liquid fuel, U acoustic
vibration energy N,0~~ j-1,d1C11j 71.oAl
AJ~STRACT: High-quality fuel dispersion can be obtained by means of
h-f vibration
energy. It is noted that liquid fuel atomizers in which sound energy
is generated
by aerodynamic converters are both simple and economical. A liquid fuel
atomizer in which acoustic energy is generated by means of an "eddy
whistle" is
described. The results of an experimental investigation of the
influence of acoustic
vibrations generated by the "eddy whistle" on the degree of
atomization dispersion
as well as a diagram of the experimental system, are given. Based on
these
results, it is concluded that acoustic vibrations generated by an
"eddy whistle"
Card 1/2, UDC: 6 6'0 06 9. 8 3:6 6 2, 6 J. 8

CHERNYKH, V.P.; ARSHINOV. F.L.
Planning, instAllation and operation of a pneumatic
dust
elimination avatem in the agglomeration plant of the
Southern
'*Q~Jiokel Combine. TSvet.met. 28 no.2:16-23 Mr-Ap 155.
(MIRA 10:10)
(Ore dressing) (Pneumatic-tube transportation)
(Dust-llemoval)

SHERITYICH Vladirdr Petrovich:. 141111MA.,
-.T,, red.
Z,=M,,==J-_-,,,; ---r- ---,~-,- ,
[Effect of specialization upon the level o.'L'
lat;or produc-
tivity] Vliianie spetsializatsii Pa uroven'
proiz-~odi-
tellnosti truda. Moskva, Ekonomika, 1965. 99 p.
(MIRA 18:9)

by_ce/vy 9H, V V

AID P - 5258
Subject
USSR/Engineering
Card 1/1
Pub. 11 - 9/15
Authors
Sterenbogen, Yu. A., V. V. Chernykh, D. P. Antonets,
"

k '7
im. Paton,.,
Iskra (Elec ( ', L'
and A
S

.
.
Nov-Kramatorsk Heavy Machine-Building Plant, Zhdanov

Machine-Buildirig Plant)
Title
Special features of the resistance
slag welding of

22K plate steel.
Periodical
: Avtom. svar., 4,
96-103, Ap 1956
Abstract
: The authors describe some chemical and
mechanical

characteristics of the 22K plate steel, the welding of

this steel 200 to 270mm thick, and the tests given the

finished
specimens. The SvlOG2 electrode wire and the

FTs-7 flux were used.
Five tables, 2 photos and 1 draw-

ing.
Institution
: As above
Submitted
: No date

9159 N Y)0y, V V
AID F 5263
Subject USSR/Engineering
Card 1/1 Pub. 11 - 14/15
Authors : Rosenberg, 0. 0. (Electrowelding Institute im. Paton)
and V., V. Chernykh (Novo-Kramatorsk Heavy Machine-
Buifding-:-M--AWMIWF.~~' Stalin) .
Title : Resistance slag welding of framework for forging and
stamping power presses.
Periodical : Avtom. svar., 4, 124-1-29, Ap 1956
Abstract The authors outline the design of the 200-ton framework
and the welding of component parts. The framework is
made for a 4,000 ton power press. One photo, 4 drawings
and 1 table.
Institution : As above
Submitted : No date

SUBJEM USSR/Welding 135-2-5/12
AUTHORS: Guzenko. I,G., Engineer, and Chernykh, V.V., Engineer.
TITLE: Introducing electric slag-welding at the New-Kramaborak
Machine-
building plant (Vnedreniye elektroahlakovoy svarki na lqovo -
Kramatorskom mashinostroitellnom zavode (gorod Kramatorsk).
PERIODICALt "Svarochnoye Proizvodetvo", 1957, #2, PP 15-18
(USSR)
ABSTRACT: The plant's experience in slag-welding heavy parts
(rolling
mill frames of up to 900 x 900 mm in aizet hydraulic turbine
shafts, ate.). Referred to as completed or as yet in produc-
tion are items as specified in the following;
A series of die-forging presses of 4,000 tons and 6,300 tons,
with frames especially designed for slag-welding on the auto-
matic machine A-372-M, turbine shafts for the Varvarinskaya
hydro-electric plant (VarvarinakayaFk3~G )l the first turbine
ahaft for the Kuybyshevskaya hydro-electric plant (Kuybyshev-
skayaT13C)i one turbine shaft for the Kamakaya hydro-electric
plant; production of welded turbine shafts of the
type of the Kuybyshevskaya, and the Stalingradekays, hydro-
Card 1/4 electric plants and still larger shafts being made
possible.

TITLE t Introducing electric slag-wblding at the
Now-Kramatorsk Machine-
building plant (Vnedreniye elektroshlakovoy avarki na Novo
Kramatorskom mashinostroitellnom zavcide (gorod Kra
.3
The capacity of available equipment Is sufficient for welding
circular joints on steel 35 UP to an outside diameter of 2.5
m
and a wall thickness of 400 mm.
Experimental multi-electrode weldifig machine A-395 has been
used for-welding the smaller frames composed of castings
welded
together, A now automatic welderp A-480, has been designed
and
the welding technology for welding big sections with applica-
tion of a continuous plate(Abstractc.rls comment: app2arantly
a sheet, orplate used an melting electrode) has been
developed
at the Electric Welding Institute imi. Paton, and in 1956
this
new method has been introduced at the New Kramatorsk plant
for
production of big rolling mill frames. One example of such,
work is the 90 tons frame for the Ashinskiy metallurgical
plant.
This stand consists of four parts, with cross sections up-to
750 x 780 mm at the bottom, and 725 x 750 mm at the top.
The "continuous plate" electrodes have been applied in the
pro-
duotion of four heavy stands for the Ashinakiy and the
Card 2/4 Zaporoxhakly metallurgical plants,

TITLEi Introducing electric slag-welding at the low
Kramatorsk Machine-
building plant (Vnedreniye elektroshlakovoy evarki na Novo -
Kramatorskom maehinostroitellnom zavode (gorod Kramatorsk).
1:35-2-5712
Two 77-tone frames of maximum section width of 900 mm for
the Chelyabinskiy metallurgical plant - are being built (as
the first in this design type) of heavy rolled stock, with a
36 % economy in weight in comparison with the cast design.
The
parts of this frames are designed for welding on welder
A-372,
the final assembling after intermediate heat treatment will
be
done on welder A-480. The material of the rolled elements in
this frame is steel 3, of the cast elements - steel 25A .
Also
mentioned is a press croashend composed of two steel castings
of 30 tons and 7.5 tons in weight respectively which has been
joined on the automatic welder A-401 (which is designed for
circular welds of large width). The plant has designed and
built a special stand(abown in photograph for welding
such welds.
Serious drawbacks of slag-welding process is the liability
of the weld metal to develop hot cracks, and the brittle
breakdown.of the base metal - cast as well as rolled - as the
slightest stress concentrations (defects in metal, or
notches).
Card 3/4 The access to some spots in-oomplex workpieces is
too difficult

TITLE: Introducing electric slag-welding at the Now Kramatorsk
Machine-
building plant (Vnedreniye elektroahlakovoy svarki na Novo -
Kramatorskon mashinostroitellnom savods (prod Kramatorsk).
135_2_~/12
for the machine A-372-M# and the welding technology or such
welds is yet in development stage. Not satisfactory are also
special devices for moving the welding equipment, tilting the
workpiece for assembling the components. Not yet solved is
the problem of closing the weld in welding circular seams on
very heavy'sections,
Two now slag-melding methods - with a fusing holder tip, and
with & "continuous plate" - are yet to be assimilated in the
plant. ,
The article contains 5 photographs and 2 drawings.
INSTITUTION: Now Kramatorsk machinebuilding plant
(Novo-Kramatorskiy
mashinostroitellnyl zavod).
PRESENTED BYt
SUBMITTEDt
AVAILABLEt At the Library of Congress
Card 4/4

CHERRIKA, V V -
SOV/122-58-7-27/31
AUTHORS: Byalkovskaya, V.S., Candidate of Economic Sciences and
,Q42Fykh.,_~V:-.- Engineer
TITLE: The Economic Effectiveness of the Manufacture of Large
Welded Components (Ekonomicheskaya effektivnost'
proizvodstva krupnykh svarnykh izdeliy)
PERIODICAL: Vestnik Mashinostroyen-iya, 1958, hr 7, pp 79 - 83
(USSR)
ABSTRACT: Electric slag welding has removed many limitations
which
existed in fabricating by welding of large machine
components. In a Stu ut by the chair for the
organisation of nachaXn&y-feO~-4rises within the
-Moskovskiy inzhenarnD-ekonomicheskiy institut (Aloscow
Angin-eering and Economic Institute) imeni Ordzhonikidze
in --c-operation with the Zavod tyazhelogo mashinostroyeniy,a
(Heavy Engineering Works) of Kramatorsk, the economic
effectiveness of making large welded components has been
examined. Basic components were chosen in three groups,
namely, welded frcm forgings, welded from castings and
welded with rolled steel. The c!:-impaxison covered metal
utilisation, lebour cost, duration of manufacturing cycle
and production cost. In the absence of prices for unique
facilities, their utilisation was not examined.
Cardl/2 Tables 1, 2 and 3 reprodu~~e summaries of the aaalysis
for

4
~5 0~^Ip leV CAAok2

ACC NRs
AR6036288 SOURCE CODE! UR/0285/66/000/009/0019/0019
AUT110R.:_ Chernykh, V. N.
TITLE: Use of acoustic vibration energy for the atomization of
liquid fuel
SOURCE: Ref. zh. Turbostroyeniye, Abs. 9.49.118
REFSOURCE: Sb. tr. Leningr. in-tinzh. zh.-d. transp., vyp. 246,
1966, 85-90
TOPIC TAGS: atomization, liquid fuel, ii. acoustic
vibration energy , //,-- i-1