SCIENTIFIC ABSTRACT KHRULEV, V.M. - KHRUNOVA, A.P.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000722410008-7
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: March 13, 2001
• Sequence Number: 8
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

PHASE I BOOK EXPLOITATION SOV/4911
KhrulevJ Valentin Mikhaylovich
-- ----------
Ispytaniye fanery (Testing Plywood) Moscow, Goslesbumizdat,
196o, 72 P. 3,000 copies printed.
Ed.: B. I. Zimin; Ed. of Publishing House: L. V. Nikitina;
Tech. Ed.: A. I. Kuzneteova.
PURPOSE: This book is intended for engineering and technical
personnel in woodworicing and bullding Industriez.
COVERAGE: The book presents general information on researc4
methods for plywood and on results of scientific research
conducted by the TsentralInyy nauchnoiseledovatellskly in-
stitut stroitellnykh konstruktsiy Akademil stroitelletva
i arkhitektury SSSR (Central Scientific Research Institute
of Building Structures of the Academy of Building ind
Architecture USSR), the Tsentrallnyy nauchno-isaledovatell-
skiy Inatitut fanery i mebeli (Central Scientific Research
Institute of Plywood and Furniture), and other research
organizations, dealing with strength and durability of

V.M.,, kand.tekhn.nauk
Problems in the theory of aorolerated gluing of panels made
-of.wood waste in a high-freq~enc7 field. Trudy Zap.-Sibefils
ASiA no.3:61-72 160. (MM 15:2)
(Induation heating)
(Hardboard)

YMMMO, V.V., kand.tekhn.nailk; MMULIV, V.M., kand.tekhn.nauk;
STAVITSKAYA, L.M., inzh,
Using plastic coating on facing tiles manufactured from wood
wastes. Der.prom. 9 no.9:16 S 16o. (MMA 13t9)
1. Zapadoosibirakiy filial Akademii strottelletva t arkhitektury
SSSR.
(Wood, Compressed) (Aminoplastice)

Use of epox:ide resins in the manufacture of abrasive vheels for
cutting objects made of reinforced concrete. Plaot.massy no,3:40-41
161. (MIRA 14:3)
(1poxy resilis) (Cutting machines)

12!wTLIEV, V.M.; NESOV, V.D,, inzh., nauchnyy red.; GLOTOVA, L.V, red.
izd-va; MOCHALINA.. Z.S,, tekhn. red.
(Strength and durability of glued joints In structural elemental
Prochnost' I dolgoveohnost' kleavykh soedinenii v stroitellnykh
Iconstruktaiiakh i detaliakh. Moskva, Gos.izd-vo lit-ry po stroit.,
arkhit. I stroit. waterialem, 1961. 328 p. (MIRA 15:1)
(Gluing)

KHRTJIE~, Valentin Mmikha lovich FRUDIN Anatoliy Somenovich; BEID2ERGVA,
t iva 8
Oastasiya S=ergeyevna; ADENOV, Viktor VasiVyevich; GUBESKOp.A.B..,
doktor tekhn. nauk# red.; AZAROVA, V.G., red. izd-va; PARAKHJU,
N.L., tekbno redo
[Wood gluing in foreign countriesl Skleivanie drevesiny za rubezh.om,
By V.M.Kbrulev i dr. Moskvaj, Goslesbumizdat., 1961. 301 p. -
(Woodwork) (MIRA 14:21)

KmuIBv,-v-ol4*--,-k--a-n--d-.te-kh nauk
Cutting reinforord-conerete flooring. Bet, i zhel.-bet. no.5:223-224
I t'l IMTRA Iz-f')

; - ,A~
. I . :.l.
...

YMULEV V.M., ~and.tekhnnauk
D=ability of glued joints in veneer, Der. prom..10 no..4:3.1-12
Ap 161a (MMA 14:4)
1. Akademija stroitel'stva i arkhitektury SSSR ~Zapadno-Sibirakiy
filial)
(Fl7wood) (Gluing)

KHRULL7. V.Mo.. kand.tekhn.nauk; 7MIKOV, F.T.t inzh.
Simplified method of manufacturing lightweight particle boards.
Der.prom* 10 no,22:15-16 D 161, (MIRA 14:12)
11 Zapadno-Sibirskiy filial Akademii stroitellet7a i arkhitektury
SSSR.
(Hardboard)

-mmLEZ'I-UIAntIn UikbaAmdoh.- PATUROYEVp V.V., red.,- BDYKO, L.I,p
red. izd-va; GRECHISHCHEVA, Vj., tekhns red*
(Durability of glued joints of wood) Dolgoveohnost' kleevykh
soedinenii drevesiny. Moskva, Gosloobumisdat, 1962. 157 p.
(MIRL 16:6)
(Gluing-Testing) (Woodwork)

KHRULEV) VA, kand.tekhn,nauk
Manufacture of lightweight particle boards by dielectric heating.
Stroi. mat. 8 no 809-40 Ag 162. (HIRA 15%9)
(iardboard) (Dielectric heating)

pKHR~UULLEVV, Vv.MM., kkand.tekhn. nauk
Characteristics of the gluing of plastics with wood. Der,prom.
11 no.1414-15 D 162. (K[RA 161l)
(Adhesion) (Wood) (Plastics)

IMRULEV V. M. -kand, tekhn., ntLuk
Rapid methods of testing glued Joints. Sudootroenie 28 no.10t
40-44 0 162o (KIRA 16.- 1)
(Gluing-Testing) (Shipfitting)

KHRULEV) V#M.; GUBENKOI A.B., doktor tekhn, nauk, retsenzent;
FREYDIN, A.S., kand. tekhn. nauk,, reteenzent; SKRIPOV,,
B.S., kand. tekhn.nauk, retsenzent; STVOCHKIN, F.P.,
dote., retsonxont; ZAYC9=A, N.A., red.; KASDOV, D.Ya.,
tekhn. red.
(Improving the durability of glued wooden structures and
building elements) Fovyaheniedblgovechnostikleenykh de-
reviannykh konstruktail i BtroitelInykh- detalei Moskva,
Goastroiisdat, 1963. 113 p. iMIRA 16:8)
(Plywood)

MMULEV, V.M.
Specilen for a rapid durability test of a wood adhesive. Zav.
lab, 29 no,lsgg 163, (MIRA l6j2)
1. Zapadno-Sibirakly filial Akademli stroitellstva i
arkhitektury SSSR.
(Adhesives-Testing)

KHRULEV, V.M., kand. tekhn. nauk; IVANOV, Yu.M., prof., doktor
-------Ukbn. nauk, red.,;.STRASHMYKH, V.P., red.izd-va; BRUSINA,
L.N.x tekhn. red.
[Instructions for quality control of glued joints in wooden
structures and building elements] Instruktsiia po kontroliu.
kachestva kleevykh seedinenit v dereviannykh konstruktsiiakh
i stroitellnykh detaliakh. Mo,akvap Stroiizdat,, 1964. 25 p.
.(MIRA 17:2)
1. Moscow. TSentrallryy nauchno-issledovatel~skiy, #stitut
stroitellnykh konstraktsiy.

KHRULEVY V.M., kand. tekhn. nauk
Characteristics of gluirW, foam plastics. Stroi. mat. 10
no.1:8-9 Ja'64, (MIRA 170)
I V 1,

ESSIOH NR,~ AP03093 8/ooj2/64/000/005/0601/0602
AUTHOR: Xbrulev# Ve X*
TITLEt Estimating the a ato of cemented joints in toots for resistance to water
phore.
and atmos
SOURCEt Zavodskaya laboratoriyas no. 5.9,1964$ 601402
TO -joint., water reistance Amosphere resistancop birch
4IG TAGSt cemented e
plyy 'cohesion failurep phenol formaidWiyde cement, urea. formaldelrjde' cement.,
.8 r strength
ABSTRAGTs. Accelerated oxperlmonts were performed to determine the resistance of
bialph plywood to the action of.waterp,heat; and atmosphere* Mathematical proc-
esaing of data proved that the change in thd percent of fallures after both the
accelerated and prolonged experiments is accompanied by a change in the coefficient
~v of the shearing strength of the samples. As the percentage of failures dimini-
ishod.. the coefficient v increased., It was also determined that with the decrease
in the percentage of failures the strength of a joint was increasirgly dependent
on the strength of the cement and its adhesion to the wood (rather than on the
i Card 1/2

4 ',Nf ILA*
A..wv
,e Of f-,31,hnj Cal R,~. j tn an
~iL 7c -,a s 1u no-q t ro
yen~Jya, no.
'nonAing; bond&-J 'Joint, bol',ed joint
loints (fnado-,by buit~i,%g -,oints during

Xa
L 20238-65
;CC&S'SIOU NRt AP4049496 SNC LOXV, 01
0 kg1cm
jcj,r t Land?~ h
Fig 1 Yield stress in shear 10 Rd
&s a function of joint

KHRUISVP V.M., Lind. takhn. nauk
Mechanization of gluing parts. Mokh. i iivtv,-,i. ))l-oizv. 18 no.9.-
19-21 S 164. (MIRA 17-11)

KHRULEVP V.M., kand. tekhn. nauk
Characteristios of the gluing of glass reinforesd plastics
Stroi. mat. 10 no.60-8 Je 164. (MIRA. i7310)
I I
I
I

,_KHRU,LP-,V,,._VA, kand. tekhn, nauk
Strength and sturdiness of bonded and bonded-screwed joints,
Vest. TSNII KS 23 no.4;50-53 164. (MIRA 1718)
1. Novosibirskiy inzhenerno-stroitellnyy institut.

T_ 1-.4844-66
ACC NRA AP6005829 (At) r'O E: UR/0374/65/000/006/0103/0107-,
AUTHOR: Khrulev, Ve X a (Novosibirsk)
ORGs none
TITLEt Surface roughitess and theological properties of adhesives
factors determining tba optimum thickness of the S.Lue'-
line,
SOURCE: Mekhanika polimarov, no, 6, 1965, 10.3-107
TAGS:. surface property, rheologic p ro p a r t y
6W*ehwvM, adhesive bonding, solid viscosity, surface pressure, surface
tensLon, glue LQjK44jVk
ABSTRAM '.The ef feet- of the su~rface roughness of nonporous materials,-.:
on theoptimum-thickneets-of a glue line was investigated, The author.
deduces a formula for,the penetration of the adhesive into surface of
microcavitieo as a function of geometrical parameters of the roughnes.s,,
A method
specific pressure, andleurface tension of liquid adhesives,
for computation of specific pressure Ias a function of pressing time and
viscosity of the adhesive to described, Orig. art. has: 3 figured and
6 formulge. (Based on authorl,s abstr&ct)
bond:
SUB COM II/ SUBM DATHt 13Apr651' ORIG RKFI 002/ OTH REF: 002-
*052*668*395
DC t, 6781621.792
L Card

Use of opthatio adhebives in power distribution.systems. Inargatik
23 no.20t27-28 0 165. (MIRA 19110)

L 3567-66 EVIT(,d)/f,~IPJ
ACCgssroN 14R., AP5024823 X I'M (m J;AWW/JW/ UR/0032/65/031/01q~~%3%1255
EMIUMH - , I . 11 , ~4 -1 ~ -.~ ., -
620.17
~.AUTHOR:- Khralev, Va -M.'
TITLE6. Demminiog'the servitm. life.,of an adhesivejoint from the data of'acc4le-~.
rated thermal a n
SOURCE: Zavd6kaya la~oratorfya, ve 31, no. 10, 1965, 1253-1255
TOPIC TAGS.-- adhesion, therma1aging:, mathematic.analysis
ABSTRACT-' The a hor describema mathematical method for estimating the length of
itime an adhesive bond,19 likely -to last from analysis of accelerated aging tests
:which consist heating specitwns t6 various temperatures and holding. Graphs are
:plotted showing.1he strength of the joint at various constant temperatures acting
ifor a more or less protracted leriod of time. A line is &awn parallol. to the
~x-axis which cuts off the sections of the curve corresponding to a 4efinite fract!o
!of_the__origiqal- strength -(approximately -75-90%).--- The -resultant - value-s- -of -logt
_-.71(where T Is the time required for a change in the given property of the adhesive
,joint to a certain value) are plotted in logT-1/7 coordinates. The values of-109T
ishould show a,, linear relationship if the thermal aging process corresponds,t.o.the.:..

~ m '' ---- " ~- -_. .1
- - . ; I . , ~. '. I ~ , " ~;;: ~ ~ ;!_,~ ~

KHRULEV, V.M., kand.tekhn.nauk
Selectina the thickness of a glued interlayer for joining
parts. Vest.mashinostr, 45 no,11:32-33 H 165.
(MIRA 18:12)

----WW/ RM
J*)_L __ ... ........
t 01261-67
ACC NR AP6003934 SOURCE CODE: UFV0091/65/000/010/0027/0028
JAUTHORs Khrulov,, Ve Me (Cudidate of technical solencos; Novosibirsk)
ORG: none
TITLE-.L. Use Of synthetic glues In power supply,equipment
SOURCE: &ergetiks mo 10# 1%5,, 27-28
TOPIC TAGSs epoxy plasticj, polyvinyl chloride.. ethyl alcohol, furane resin., electric
engineering, ~OA'
ABSTRACT: Instead of older Methods (soldering., etc.) synthetic glues are now often
used during tho installation and maintenance of electric equipment and supply linesa
Chlorinated polyvinyl chloride glue (solution of chlorinated polyvinyl resin in
methylene chloride or dichloroethane) is us&." for gluing junction boxes, but this must
be done away-from heating equipment in well--dventilat4 areas because grf its toxicity
and inflammability. Junction boxes, made f~.vm epoxidePcompound K-115,Vare simple) have
good electrical and mechaniciLl proper-ties,, and is ~re itively sEall in size. While
L
connecting bables, thr. junotd,(.n boxes are filled with a compound consisting of epoxy
resin F5-5#Vpolyester ~W-2,N uartz powder, and polyethylenepolyamines as a solidify-
ing ag The same comp-o-un-a is used for gluing together the halves of east junction
boxes. The gluing of polyvinyl'chloride shields of cables by using rubber provides for
I Card Ij/2 UDC: 668,31o658,26-

L 0591 -67 PdP(J)/EVP(k)/VdT(m)/-r-Wp(v)/E7,4P(t)/ETI TJP (c) gMAv4Y1VVff
_A~d_ N_R_: AP6009260
SOURCE CODE: UR/0122/65/000/011/0032/0033
AUTHOR: Khrulev, V. M. (Candidate of technical sciences)
ORG: None
TITLE: The selection of glue.,A 19~
qayer*thickness for joining parts
SOURCE: Vestn.ik mashinostroyeniya, no.,11, 1965, 32-33
TOPIC TAGS: glue, molecular interaction, metal gluing, surface property
ABSTRACT: The author discusses the basic principles oi glue and surface interaction
along with a diagram and expressions for calculating glue layer thickness. Optimum
gluing conditions are discussed. The degree of surface cavity filling in joining ma-
terials is a function of pressure. Surfaces separated by a gluv. layer can approach
each other to the point where the peaks of the two materials interlock during press
fitting if the pressure applied to the surfaces is sufficient. This process is ac-
companied by increased molecular interaction between glue and surface. The strength
of such joints is much greater than that achieved by a glue layer alone cr by dry
pressing. Data are discussed with respect to bushing joint strength and bearing ring
force fitting using a thin glue layer. These data show that the use of a thin glue
layer produces,joints which are 3.5 times stronger than those produced by dry force
fitting. A graph is given for determining -the thickness of the glue layer for the
case where press fitting is replaced by gluing. Orig. art. has: 2 figures, 5 fomulw
711B CODE: 13, l1/ SUBM DATE: None/ ORIG REF: 002/ OTH REF: 001
K11
UDc: 621.792.001.24

KHRULEV, Valentin Mikhaylovich; BRATCHIK, Ye.I., red.
[Synthetic adhesives in railroad technology] Sintetiche-
skis klei. v zheleznodorozhnoi tekhnike. Moskva, Transport#
1965. 150 P. (MIRA 18:2)

777
-26. upec-'r,"
vnvtl t IV nmnot"Iar-
-A t,-. n i S~tll~ j 1: 7
the j3hrshtaln methwll.
are

a uO
ka m
F, R Flit rVIES .:t
W. E~ Hill;
Mix c
ip
Ir
43
a Fria if
01
or F
V7

Card 1/2

L 632~-66- EwT(I)IFBD 13WIWS-2
ACC NR: AP5026699 SOURCE COM UR/0141/65/008/005/085710861
AUTHOR: Razin, V..A.; Khrule _~_V_V
ORG: Scientifie-Research Rgdjo Physics Institute, Gorkiy Univerni V (Nauchno-0
3.Ssledovatellskiy radiofizichesRiy institut pri Gor1kovskom univeRitete)
TITLE! Optimum wavelength and width.of spectral interval In studies of the polari-
zation of distributed cosmic radio-frequency radiation
SOURCE; 1VUZ. Radiofizika,- v..8, no. 5, 1965, 857
TOPIC.TAGS:. radio emission, cosmic radiation, antenna radiation pattern, decimeter
iwave
ABSTRACT: In.order to determine the optimum transmission bandwidth of the apparatus
used for measuring the polarization of cosmic radio-frequency radiationi the authors
shave determined.the dependence of the position angle and degree of polarization of
.the radiation on the transmission band. At frequencies above 600 Mc, the optimum
~width of the spectral interval is.large, and there are.no restrictions an the trans-
mission bandwidth of the apparatus in.connection with the rotation of the
Card 1/2 UDC: 621.396.628 523.164 523.164.41

AM M 6002292 SOURCE CODE: UR/0-14*'1/6s/008100611063/1068
A UTHOR: -Razln,,, V. A,; - Khrulev, ~N&Wv-
ORG; Gor'kiy State Upiver .at (GIo.rIkovokiy gosu.dar aItvennyy universitet) lb
TITLE: Depolarization of cosmic _rAgaion. due to the dispersion of Faraday rotation
of radio-wave polarization plane
SOURCE: IVUZ. Radiofizika, V. 80 no.. 6, 1965, 1063-1068
TOPIC TAGS: cosmic radiation, cosmic radiation polarization
ABSTRACT; Simplest cases of depolarization of cosmic r-f radiation were
considered by T. Hatanaka (Publ. Astron. Soc. , Japan, 8, 73, 1956). The present
article theoretically considers more complicated cases of the depolarization due to
both the Faraday dispersion and the finite bandwidth of measuring instruments.
1 U
These general formulas are developed1or the position angle; x and for -the
2
degre
e of depolarization: P F(E) cos (2t) d IF(E) dt where I, U are
integral Stokes -.parameterse Specific formulas for depolarization, normalized
LCard 1/2 UD9, 5Z3. ~641A:.621., Aza-

L 16ee5o-661.
ACC: NN AP6002292
frequency characteristic,. and relative passband.are tabulated for. these circuits and
conditions, single-circuit stagej two-circuit resonant stage, four-circuit resonant.
stage, Gaussian characteristics# two staggered circuits, three staggered circuits,
two pairs of staggered circuits$ two groups of.three staggered circuits, 11 -shaped
frequency charact-aristic. It is found that, with polarization >, 0. 05, the position
angle varies only by a few degrees for-a receiver passband within 1-21% of its
resonance frequency. Orig. art. has: 2 figures, 18 formulas, and I table.
SUB CODE: 03 SUBM DATE: ZZJun65 ORIG REF: 004 1 OTH REF:: 002.
76 a _51
6rd

WAMDVA, M.P., inzbener; KHRUMVA, I.K., inshener; BOCHKARWA. I.I..
1nshener. -X
O"W'" W-.V-Wft. "WO
New electric detoustorg of Umediate and short-delay effect*
Gore shur. no.4,#60.63 Ap '57. (NLRA 10r5)
(Ditonators) (Blasting)

KRULLTAP K.N.,, zasluzhennyy vrach RSF`SR (Moskva, Novyye CheremushkJ,
""~~~Vova d.7/1, kv.1,9)
Comparative evaluation of the results of treatment of a congenital
dislocation of the hip joint.in childran. Ortop., travm. I protez.
26 no.12j17-22 D 165.
(vim 19 & 1)
1. Iz Moskovekoy oblastnoy detskoy, orto ed n vrologicheakoy,
,V5, o- e
bolinitsy (glavnyy vraeh - P.V.I)akhom Submitted April 26,
1965.

XBRUISTA, L*Nq
ftmultaneous-study of conditioned reflexes of the earoua and zgeo"
salLvary glends, Trudy Instoysonerv0deiategerefixLol,
(MLPA 916)
1, Iz laboratorii vagetativnykh uslovnykh refleksovo xavadviyush6hLy
(SALIVARY GIANDS) (CONDITqW RKSPOM)

-[-A fT-[\ ('j- V r I V
USSR/Himan and Ania-I Physiology - The Nervous System. V-10
Abe Jour Ref Zhur Diol. p No 21 1958) 9063
Author L.N. IhM3' eva
Inat The Inatitute,of Hidi
er:Nervous,Activity of the Academy of
,
Sciences of theOffi.
Title Si=itaneow fterimental-Study o*f C' onditioned Ref lexee of
Serous and. Mkjcous,~Sallvary_ Repovt 2. Conditioned
Reflexes of- Serouo.,.wd_Mkwous- Glands in the Dog upon
Ewsure to Radiant, &,orgy.,
Orig Pub Trudy In-ta. byssh. nerva. deAtellnosti AN SSSR, Ser.
fiziol., 1956, 2, 267-272
Abstract Mae parietal region of a dog
vithLfistUlao of the parotid
-
and submaxillary sdand vas irradiated four times with co6o
(50 r). Changes in.conditioned reflexes were not observed
the first day. On the succeeding days there occurred an

XRRULEVA, L.N.
oi ga;;a rays on the higher nervous activity of dogej
Trudy Inst.vys'nerv. detat. Ser. patofiziol. 4:48-67 '58 (MIRA U:12)
1. Is laboratorii v7sehey nervno7 deyntellnonti zhivotn7kh
(zar; laboratoriyey - starshiy nauchnyy sotrudnik A.A. Pavlovskaya)
Instituta vysahey nervnoy deyatellnosti AN SSSR.
(GONDITIONED RESPONSZ)
(GAMA RAYS-PHYSIOLOGICAL IWFECT)

Xffeot of aminazine on the higher nervous activity in animals. Report
No.l. (dogs). Trudy Inst. vya. nerv. dieat. $or. fisiol. 3:151-158 159.
(MIRA 12:3)
1. Iz laboratorii vegetativnykh uslovrwkh refloksov, zav. - A.A, Fav-
lovskaya.
(GONDITIOM RMPOSSE) (CHIORPROMMUZ)

Influence of aminazine on the higher nervous activityof Aulmls
(dogs), Report No,2.Trudy Inst.vye,nerv.detat. Ser.fisiol. 4:.
141-151 16o. (MM 1317)
1. Is laboratorii vagetativoykh uslovnyiih refleksov Instituta
vysshey narynoy doyatelluosti AN SSSR. Zmveduyushchiy labor&-
toriyay*- A.A. Pavlorakwx.
(CELMPROMAZIU) (MMVOUS SYSTIM)

MULEVAt L.W.
Influence of =Lnazine.on the higher nervous activity of dogs,
Report No. 3z Cluinges in the conditioned and unconditioned
food reflexes following the use of aminazine. Trudy inst,
vys. nerv. deiat. Ser. fiziol, 5:217-222 160, (MIRA 13:10)
1, Iz laboratoril she nervnoy dayatellnosti zhivotnykh
(zav. - A.A, Fairlolvaya instituta ashey nermoy deyatellnosti#
(REELMS
(OHLORPROMAZINEI 37

--MUM1 ~Av LJ1 ~q
--------------------- -,
Influence of aminazine on the higher nervous activity of dogs.
Report No, 4: Influence of aminazine on the characteristics of
the basic nerve proceboelo and-on the.dynamics of experimental
neUroses. Trudy Insto vys, nerv. deiat. Ser. fiziol. 5:223-230
16o. (MIRA 13: 10)
1, Iz Laboratorii vyssheT nervnOy doyatelinosti zhivdtnykh
(zav. - A.A. Pavlovskaya instituta vysshey nervnoy deyatellnosti.
-(CHLORPROMAZINE) (VERVOUS SYSTEM)

kMUMAp L.N.
Effect of aminazine on the higher nervous activity in dogs. Zhur.
nevr.i poikh. 60 noo5t577-584 160. (MIRA 13:9)
1, Laboratoriya vyssey nervnoy deyatel.Inosti zhivotnykh (zav. - A.A.
Pavlovskaya) Instituta v~abhey nervnoy dayatellnosti AN SSSR Mo
skva
(CHLORPROmaINE) (CONDITIONED RESPONSE)

IMW- M-A L*N*
Effeet of large domes -of straima"Ine on the higher nervous aotivity
of dogpo Trudy Instavysoasrv.deiat. Ser.fisicl,, 71210-215 162.
(MM 1612)
(CKWMMUMIC) (COVDITIMn TMPMB)

KHR=VA, L.N.
Use of small doses of aminazine in experimental neuroses.
Zhurl nevr, i-psikh. 64 no. 12:1877-1882 164. (MIRA'18:1)
1. Laboratoriya uslovnykh refleksov (zaveduyushchiy - prof.
B.A.Aaratyan) Instituta vyeshey nervnoy deyatelinosti i
neyrofiziologii AN SSSR, Moskva.

L 0947-65 ZA (I,)-?
j- anob I o I o EQ t ino.
mt., rolont carrier,
aa-1monell aj, .,-pas toure-11 ap --:b
r.OG 0~4 On
:_1 T. ~Z.

Rpm IF Szourlolla PSeuauuuuuruuxugff-~L- aria J- alul:laj.I:L 01 Ljj-!UuCFvj-a WIUI-W LULLE= JilE-
mm I ;stora;ze cites Mus musaujus and NJ--otua ripvalls were mogv arzen !
VA,

and Mu- mueval,,75 were mootly
-r~.Tt the -or -'s
wl,,r) 43alidono sia a-na -)Bijg,
2/-3
Mi i
T-k
atior, -,of-the-yanistry of TTqeT--
00 C
(MER

MKHTAY,JIODZHAYEV, S-.T.; KOLONTAROV, I.Kh.; ROZOVp M.N.; BURSHTFYN, I.I.;
IgiRULEVA, TJO; ARETSKAYA, Yu.S.; POPOVA, N.M.
Production of gUnite by.burning in a rotary kiln. Uzb. khim.
zhur. 7 n0.5:43-1+9 163. (MIRA 17:2)
1. Institut khimii AN UzSSR.

KHRULIKEVICHII 0 nAh.
Maintenance system for "Ferguson" machines. Tekh.v sellkhoz. 19
nq-5:59-60 My 159. (MIRA 12:7)
1. Minskiy traktorMy savodo
(Agricultural maebinery-Maintenance and repair)

KHRULIKEVICK, O.A.
In India and Burra, Kekh. I elek, sots. selikhos, 16 no~3:56--57
156, (India--Agricultural machinery) (MIRA 11:6)
(Burma--Agricultural machiner7)

5/121/61/000/008/005/006
DOWD113
AUTHOR: Khrullkov, V.A.
TITLE: Grinding of permanent magnets
JL2
PERIODICALs Stanki i instrument, -22
4no. 8, 21
TEXTi~ The author discusses the grinding of permanent magnets made of hH
(AN), PH.K (ANK), and 14 KO (ANKO) cast alloys which are widely used in the
instrument making industryt and gives practical advice on means of - elimi-
nating fragmentatior and,scaling. The magnetic alloys are solid iron so-
lutions with an Ni, Al, and Cc base. They can be ground without defects
by means of abrasive wheels made of mono- or electro-corundum of M 3 W)
to e 1 (81) hardness with a ceramic bond, or wheels with S1 to(? 2 (S2)
hardness with a bakelite bond. Grinding of magnets with silicon carbide
wheels ofCM 1 (SMI) to M 3"(M3" hardness leads to fragmentation and scal-
ing. Measurements of the cutting-force components during cylindrical in-
feed grinding at various speeds gave the following results; (1) The opti-
mum speed for magnets id 35 m/min. At this speed and a transverse feed of
0.2 mm/min, neither fragmentation nor scaling occurs, and the specific
Card 1/2
f M

-,a,. Ing , he a t -res. ~-3,, ant -i- ' oy
P'~l P T'O S EA,ND COVERAGE: The boo
k cit, -s the results of resaa7c- ccnducted b
Y71
ners ljoing a
t, brasive wheols.

7- e sea r c h
can also bi. useE',,;L to '.each.!r!3 2ind stu-
institutes.
Introduction
C staf--of-t6e-irt of polishinx heat-recist-Int allov-,
-'4

WINSM, X.Ye.j NAYERMAN, M.S.; PETROEW, L.K.; POPOV, S.A.,
kand. tekhn, nauk; KHRULIKOV, V.A..,, kvnd.tekhn.naukpretsen-
zent
(Efficient use of diamo nd tools) RatBional'.-jaia ekgplta-
tataiia almamogo instrumentao IBy] M.E.Kaminskii i dr,
Moskva# Mashinostroenie, 1965. 238 P. (MIRA 18:6)

ANDREM) G.S., kand. tekhn. nsuk; BOKUCHAVA -G V., kand. tekhn. nauk,
dots.;-BRAK", L.A., inzh.j BUDNfK0`VA: A.V.., inzh.; GORDON,
M.B.p kand. tekhno nauk# dots.; ZHAVORONKOV, V.N.., inzh.;
KAR23AVINA, T.V.,, kand. tekhn. nauk; KOROTKOVA,, V.G., iuzh.;
KORCHLK, S.N.0 insb.; KLUSHINI MoI., kand, tekbn. nauk, dots.;
KUZNETSOV, A.P., kand.--tekbn. naukj, dots.; XURAKIN, A,V.p inzb.,j
LkTYSMj V.N.j #zb.; OLIIKH(YVSM, V.N., inzh.; ORLOV, B.M...
kando tekhn, naW--# dots,; OSHERp R,No-, insh;.- PODGORKOV VOVOI
inzh.j ; SILIVESTROV; V.D*, kand. tekbn. nauk [deceased.11
TIIMaIGV, V.M.., inzb.; TROITSKAYA,, D.N.,, in2h..,- KMWj.-U10V' V!.A.)
-tekbn.
inzh.j-, LESNICIWKO, I.I., red. izd-Ta; SOKOLOVAP TaFe.,
red.; GORDEYEVA, L.P.,, tekhn. red,
(Lubricating Iand cooling fluids and their use in cutting metaIS3
Smazoehno-okhlazhdaiusbehie zhidkosti pri rezanii metalloy i
tekhnika ikh primeneniiao Moskva, Gos. nauchno-tekhn. izd-yo
mashinostroit.-lit-r7o 1961, 291 p, (MIRA 15 -.1)
(Metaluorking lubricants)

PER, Abram Grigorlyevich; KMLIKOV, -V A.. kand. takhn.naukp retsenzentj
KUNIN, P.A., inzg.-,red.; kEPANOVA, A.A.p red. izd-va;
NOVIK, A.Ya., tekhn. red.
[Diamond and fine machining In the manufacture of instruments]
Almaznaia I tonkaia obrabotka. v priborostroenii. Moskva,
Oborongiz, 1963. 186 p, (MIRA 16:4)
(Metal cutting) (Instrument manufacture)

VIPAIISKIY, Yu.K.; GOROKHovsKir, Yu.N.; KHRULIKOVA. IT.D.
Investigating the capacity of photographic materials for
reproducing small details of the optical image. Part 3:
Iffect of the positive printing conditions on'the
reproduction of two-dimensional objects. Zhur.natich.i prikl.
fot.i kin. 5 no.1:15-19 Ja-F ,6o. (MIRA UiO
1. Gosedarstyannyy optichaskiy institut imeni B.I.Vavilova.
(Photographic sensitometry)

K14RUI,'KDVA,
ow-" '(1040 . of znlw,6 in
d J)'111 N N4.14% 111141 voying elah.u.
In.21 of M-4011 "tic alu'llell
The conco. at Zml was 0AW N. Tim reditelkin of Zo in
bwall. MWO Allk. than 2-0 SAHMIA MlMC44~WAVVTUUIIllV#J
at the top. , Ifor then solas. the polartimphic wave
"'juatloa r - rl/. - (2.3 RT1xF) bf (i~(ij - i)), where
. /.Is the hall-wave I - /# does not ap
in Its PIMPIC I'mm, "M04ZIN-taluts were madc t 0. p"r
.st"13()Iwltbodropping-Ilgck-ctfode. PoralkAliconcus.
limn 11.1 to I N. the c4~mtlm (*,/,)& - - .1 - 0XK) folt
-141*- arliclobw it , LUM, 1,401). awl IALI Nt
lemps. 0i , Itud 30" mp, For amem 1.1 to 2.0 N
v~4 0.12 lot Acm-4 whefe Aug. 6 flit av~
fl, of the Oil - Wad 1.1471 r*-* - IAM. aral
r;: a 1-465, &;W000 with the hall-wavc "stUl
111 ustion applicable to coinplex4onning cotoplis.
so/ji,ldlog VII- p2.I(Rr/*F)Irulk-Atcsa value
fly lurallot,11 (OW6 -
1.00 V. F10111 the Value$ ObUitli'd 101
the t#lnp. two,, tbe.brAt of Activation is 18.10) kilo-
Valorles. A. Leviton

GABROVSKI, N.;
Atv-Dical case of Raynod's dlisass. Suvrem. mod., Sofia 8 no.2slO3-108
1. Is Okolliskata bola4 @a - Ikhtimn (Gl, lakar; L Georgisv)
(RAYUMIS DMIMbl, ages reports,
atypical oase (Bul))
El -7; w L~

IV
41
V1
V fy)
ut
it
jj~aj
ots.
V-s!
pill! HIP
v
it P: -ri.,
1,i J W APH
I
V ell 5
9 -. !
;A1
slmv
.,j
a
13
6 A' PAS
fa

$0v/125-59-9-9416
AUTRORt GuValo. Tu. D., Candidate of Technical Rejences, Rabl-
1,jo~enberg.c.^- end
welds
TITLE$ Electric Welding under Slag of Circu=fOrInItial
of Thickwalled Tanks
PSUODICALs Avtozx~labeokaya ovarks# 1959t Or 9o p, 64-73 (VSIR)
ABSTRACTs The Barnsullskly Boiler-Torko In cO-OP*ratiOn with the
Institute of Electric '4elding isent ?atoll has.
in 1953-195S.. worked out and Introduced the method Of
o and circumferential
1 O:rIc welding of longitudinal ~ f
Id f r boilers and hydraulic press dru". made,O
:
a A -to 20 am-
steel 22 k old having . evai thick,,--- e- apa-
in P14 1. a cylindrical tank of 1000-20c0 liters C
city with wells 70-15 ca thick, working under pressure
Of 390 atm. Is given. Refers the new process was in-ro.
ducod, such tanks were made of forged shoets. or they
Card 1/~ were all-forgedl am a result of this method of =anufac
jf2g. a atm 04804 of metal w.904 Inomachi Ing
a~4 cr *mounted to 73-e. while the proc an atm.-
:hlnlng and finishing took 2 to 5 s*0k2--Tt* new method
nobles manufacturing Of cylindrical tanks, out of two
parts prepared by.hot stamping under pressure of 0000
'tons. Welding of circumferential jointx is performed
by. two electrodes at the oJActrode food speed of IN
NVhOur. At the beginning Of the praossa. the tension
of the eras apyl ad Is 40 to 42 volts;~ later as. when
the process becomes stabilizede the tension I* raised
u p 0
21,t;Z4t;OltN, and the electrode food speed u tr
The slag puddle Is 45-55 = deep. In able
1, figures showing the conditions of woldits are given,
f +
,rn compliance with the regulations a the 17 osgortekh-
admor and of the technical conditions of M. the
quality of welds undergo** a control sh1ch Is performed
by means of tatrx-aonia defactoncopes that permit
Card 2/3 disclosing of such faults which could not be detected
by using other methods of checking, and which shorten
the process ofr -rays *~amlnstlon. The exazInation
':fd",; rul*' performed an 25~ of circumferential
era am thick to 90 minutes. Table 2.61ves the :ve_
r flCurea on toNt" of welds )vtvtr.C dl- - 155 sm.
Wag
di" was performed Z)y 3 -1002 *I*ctr7d* wire -L h
application of poster fluxTAN-S?*. Thtr;.are 2 tables.
6diagrams, I photograph and 7 Soviet forences.
ASSMIATICIN 1) Barnaul'okly kotoltwy rarod (Parnaul Pailer Torkel,
(Rabinovich) 2) Orden* trudovogo krnsnogo rnamenj Instj
tut eloktroavarkL iM*Zli T6.0,rStona AN USTR (Order or
the Red Penner of labor Institute of TIQC%rlr 'Velding
Lineal YO.O.Poton,A3 Ukrl',70, (P*11for.1upalo, Rosen.
b&rgvKhrum4xh*)
30MaTTXDs August 21,1958
card 3/3

SOV125-59 -3-4/13
18(5).,~25(5)
AUTHOR: Voloshke-vich, G.Z., and Khrundzhe, V.M.
TITLE: Elcetric Welding with Covered Electrode by a Melting Work-
Piece (Elektroshlakovaya svarka plavyashchimsya mundsh-
tukom)
PERIODICAL: Avtomaticheskaya s varka, 1959, Vol 12-, Nr 3, pp 32-34.
(USSR)
ABSTRACT: A description of the method of welding with melting,work
pieces, of the construction of the melting work piece, of
the necessary equipment as well as of the technique of
the welding process is given. The melting work Diece can-
be fixed between the two pieces to be welded in a movable
as well as in an immovable way. This method is to be re-
commended for welding pieces of a width of more than 500
mm and a length of more than 1000 mm, for welding of in-
tricate profiles and joints that are inaccessible. The
selection of the work pieces depends on the material of
the pieces to be welded. The diameter of the work piece
Card 1/3 should not be more than 10-50% of the welding seam. The

SOV/1.!25- ~9-3-4/13
glectric Welding with Covered Electrode by a Melting Work Piece
construction of the melting work piece is described in
Fig. 1. The melting work piece consists of a sheet of
approximately 4-5 mm thickness, upon which a thin sheet
is welded byspot welding in which the covered electrode
is led. According to the author, construction (1v is
the best of possibilities (la), (lb), (lv) and (1gPIt
can be taken from Fig. 1 that the melting work piece can
have any shape Fig. i2 shows an example for the mounting
of immovable m;lting work pieces. The material of the ~
insulators should be of the kind that melts under process-
ing and will be taken up by the pool of slag. The best
material is glass wool, the worst asbestos. In Fig. 3
an apparatus is shown, by which the electrodes can be led
continuously. Speed can be calculated by an equation (1)
which is demonstrated in figure 6. Fig. 5 shows an appa-
ratus which enables an additional correction of the lead-
ing of the electrodes. The latter one, however, is only.
applicable in a limited way. (Maximum width of the melt-,
ing work piece is 200-300 mm). By equation 4, the nec-
Card 2/3 essary distance between the electrodes can be calculated.-

-4113
SOV/125- 59-V
Electric Welding with Covered Electrode by a Melting Work Piece
There are 6 diagrams and 1 Soviet reference.
ASSOCIATION: Ordena trudovogo krasnogo znameni institut elektrosvarki
im. Ye. 0. Patona AN USSR (Order of the Red Banner of
Labor Institute for Electro-Welding im. Ye. 0. Pator~ AS
UkrSSR) .. '
SUBMITTED: November ;22, 1958
Card 3/3

PEASK I BOox UriolTATION 30V/5078
AvAdeftlya naulc MR. 11yov. Instytut ol*Ictrozv&rYuvann7A
Thedrent" now7kh sposobov evarkI v promyshlonnost'; abornlk otAteY.
T". 3. (Introduction of low Welding Kethods in Industry; COI-
lectlan of Articles. v. 3) Xlyev, Gas. jxd-va Uklm. lIt-ry
Ua,53R, 1960. 207 p. 5,000 copies printed.
Spoci Agencyt Ordena. Trudavaeg Kmsoogo Znamenl Inatitut
alsictroavarld Imeni Wmdexlka Ye. 0. Patoom. Akadeall n"k
Ukralaskoy 33H.
Zd.t K. Maremko; Teich. Ed.. 3. Mtusevich.
PURP=s MU olicrtlca of articles in Intended for personnel In
the welding industry.
COVXRM: fte articles deal with the ecabined experiences of th*
luxtItut elektrosi-ki Iment Ye. 0. Patom (Electric Welding
Institute Imeni To. 0. Paton) and several industrial enterprises
in sol clentifle and engineering problgxm In welding
technology. Problow In the application of new Methods Of R4-
Ch"ised Welding and clectroalsS welding in jjodustr7 are discussed.
?Mx is the third collection of articles publIsbed under the same
title. The Yoreword was written W B. YO. ftton,~ Acadeniclan or
Uw Ag"way of Sel"ces 01cminjan 33A and L4oln prize winner.
Them am 00 references.
TAKE OF CCKTS=I
_Xskra. A. is. A. Sterentogen lCandIdato or,
Engineer. Elect--Ic
Welding 2_.L_Arj4mzJt-
MvLnser. Zudmovskly- zavad Isent 11 .licha (Zbdsnov Fient
ImanI 11.1lich)J, fg.~~RibLn;o,!Ir (Engineer, Bammul-Alcly
r P
kot*11477 zavod u or Plant)) and 1'7-0=71ch
n"
lxngtnoer. New Xrm-torsk Xachinery
Q. Ilactroo2ag
Waldlnj or Steol-FlAts Structures
17

of Techn%cli
A. 3. [Englocer), A_JL
~=
J
esj
and I-T-119vikov-13enior Engineer, Electric -Weld-
;u
Ing Instl to Electroalag Welding or
Structures for Chanical Equipment made From medium-Anoy Steel
Forged Sections 32

-3--L-[Cand1dato or Technical Sciences).
XI
923M
,.
fmn,&,,,v (Engineer, Itlectric Welding institute ineal
b

I- of tfQ-'dLng DeWt-
7aron), and
-
-
-
straltel 'ny-y zavod latent
Rent, Podol 'skly a"
Wm
a
S. 0. OrdrbOalkldze (Podol'sk Machinery Plant 1xital
S. 0. Ormioalkidio)].' slactroblag Welding of larger Firnloo
ftoo or M28)19T Austonitic Steel
&MM!SkL -SX. [Candidate of Technical Sciences],
1 -Cln I

-T
D
2naln""
a' O*r I a
R
h~
i
le
~
.'
j
. I
-
41 1 InAtItu n
.. to Ismoni Ye. . p&tcn p 3, SIn
I
I
.,
tn
SXIZ-Ilf*&d Of Welding Engineering D~partawnti. J
31-
(Weldin
Sho
P
roCe
g
p
TH. dA Enalnearl. Autocatic
MMA
curoelas Voiding or Ke Sulb-and Larv-ThIcImiess
Titanium Products
64
flnglnoirt% RIOCtrit Voiding Institute Iment,
ton A. Z-%V% IHGftd Of Welding Laboratoir7,
VNIISTJ . and A x Chier or the Bureau for ass-
21ne Construe
on
t on AT91-2 33SR (Main AdmV..stration or
the Oas Industry =R)I- xechanized Mtbciia or welding
ass Pipeline*

TOLOSHOV CH, a.&.; MMUNDZHN, T.K.; SUBHOMIK-SLIUSAWM0, I.I.
Reconditioning the stand of a three-ton ha=wr. Aytonevar.
13 noe7t76-79 Jl -160a (MIRA 13M
1. Orden Trudovogo Krasnogo Znameni Inatitut elaktroevarki im.
Ye.O.Patons AN USSR.
(Power presses-Raintenance and repair)
(Blectric welding)

SHEK XTER, S.Ya.; ZADOROVINYY, N.K.; KHRUNDZHE, V.M.
---------------
An 18 electrode unit for molten461ag 4rcless electric welding.
Biul.tf-kh.-ekon.inform. no.9:25-27 '61. (MIRA 14:9)
.(Electric welding)

32959
S/12 62/000/001/006/011
L) D036YD113
AUTHORS: Voloshkevich, G.Z.; Sushchuk-Slyusarenko, I.I.;__K:nrundzheV.11.
TITLE: Electroslag welding of the runners of radial-axial hydraulic
turbines.
PERIODICAL: Avtomaticheskaya svarka, no. 1, 1962, 46-58
TEXT: The authors d escribe a technology which they developed for manufactur-
ing a 120 ton runner for a 225,000 kw turbine for the Bratskaya GES (Bratsk
Hydroelectric Power Plant ) by joining the separately-cast blades to the
upper and lower crowns by electroslag welding with a consumable electrode-
holder. The runner could not be cast in its entirety because its shape was
too complex to permit obtaining a high-quality casting of the required pre-
cision. The Water Turbine Office of the Leningradskiy metallicheskiy zavod
(Leningrad Metalworking Plant) had originally suggested using electroslag
welding for joining the blades to the upper crown,and manual welding for
joining the blades to the lower crown. The blades were held in position'
while being welded to the upper crown by normal n -shaped clamps joined to
the blade by heavy welds; a proportioned counteracting moment was applied to
the blade edgea duringwelding by pre-tensioned spring clamps (Fig.2). The
Card l/ 7

32959
S/125/62/000/001/006/011
Electroslag Yielding D036/D113
general arrangement of the blade and upper crown is shown in Fig. 4, in
which(l)are the spring clamps welded on to given points on zhe blade,(2)are
the normal U -shaped clamps for holding the lower end of the blade,(3)are
glass fiber inserts for insulating the consumable electrode-holder and(4)is
a clamp which is welded on to the blade and which thrusts against a boss on
the crown. The latter clamp prevents the blade edges being displaced in the
upper part of the butt. The position of the outlet edge of the blade was
taken as a base for the assembly. The welding conditions for welding the
blades to the upper crown were as followsi welding voltage 43-46 v; fead of
welding wire 160 m/hr; number of wires - 2; depth of slag Pool 45-50 mm. The
welding was carried out with an A -545 (A-545) Yielder, A 14 -a (AN-a) flux,
eB -io r2 (Sv-lOG2) welding wire and an 8 mm thick consumable electrode.-
holder made of er-3 (St-3) steel. One butt took 2 machine-hours, the total
time required to assemble and weld one butt being 3.5 hrs. Before welding
on the blades to the lower crown, the edges of the blades were trimmed by a
special P -930 (R-950) device, in which the cutting torch could move along
its axis along guides parallel to the generatrix of the internal conical
surface of the crown and at the same time turn about the runner axis. When
Card 2//

32959
S/125/62/000/001/006/011
Electroslag welding D036/Dll3
assembling the lower crown and blades,.the lower crown was clamped by three
struts of refractory steel (Pig.1) in order to preclude geometrical dis-
tortion caused by welding stresses.and subsequent heat treatment of the two
halves of the crown. For welding the blades to the lower crowns a manipu-
lator held the runner at an angle of 450 to the horizon. The welding con-
ditions were as followsz. welding voltage - 44-47 v; fe-,' of welding wire
177 m/hr; number of wires - 2; brand, of welding wire - ~~0-10 r 2 (Sv-IOG'--),
depth of slag pool - 45-50 mm. An IZ;r.3 (St-3) consumable electrode-holder
8 mm. thick was used. The welding took two machine-hours and the total
time required for the assembly and welding of one butt was 3-5 hrs. An
accuracy of 1 mm was aohieved in the radius of the inner surface of the
crown after welding. The conclusions are as follows: (1) A flexible attach-
ment by spring clamps may be used in..addition to a counteracting moment for
obtaining accuracy of the measurementoafter welding, in addition to a
counteracting momenti (2) The precision of the dimensions of a welded-cast
runner is determined by the precision of the blade blanks. A considerable-
number of errors in the blade dimensions can be compensated for during the
assemblyi (3) Use of a flexible attachment for manufacturing the first
welded-cast turbine runner for the Bratsk Hydroelectric Power Plant allowed
Card 3/1

32959
S/ 125/62/000/001/006/011
Electroslag welding ... D036/DI13
the accuracy of manufacturing the runner to be increased several times in
comparison with a solid-cast runneri (4) A special gas-cutting apparatus
should be used for trimming the blade edges connected with the lower c*rownx
(5) Welding the lower crown to the blades should be carried out by'the
electroslag method. The costs,of making T-joints with a conical axial su-c-
ace do not exceed those*incurred when welding the blades to the upper crown.
There are 11 figures, 2 tables and 3 Soviet references.
ASSOCIATION: Ordena Trudovogo Krasnogo Znameni Institut elektrosvarki im.
Ye.O. Patona AN USSR (Electric Welding Institute "Order of f1he
Red Banner of Labor" im.Ye.0. Paton of the AS UkrSSR)
SUBMITTED: JanuarY 31- 1961

EPRUNDVE, V.M.; SHEKHTER, S.Ya.
Electric slag welding of a conical crusher shaft. Avtom.svar.
15 no.5:72-77 MY '62. (MIRA 15:4)
1. Ordena Trudovogo Krasnogo Znameni Institut elektrosvarki
ineni Ye.O.Patona XI USSR (for Khrundzhe). 2. Konriunarskiy
metallurgicheskiy zavod (for Shekhter).
(Crushing machinery--Maintenance and repair) (Electric welding)

SUSHCHUK-4SLYUSARENKO) SHEKHTER, S.Ya.
Providing for the dimensional accuracy of cylindrical articles
during electric slag welding. Avtom. avar. 17 no.2:77-80 F .164.
(MIRA 17:9)
1. InstitiA elektrosvarki-im. Ye.O. Patona AN UkrSSR (for Sushchuk-
Slyusarenkc; Khrundzhe). 2. Kommunarskiy metallurgicheskiy zavod
(for Shekhter).

KHRUNDZHE . V. M.
Reconditioning parts by electric sl6g welding with a con-
sumable tip. Avtom. svar. 17 no.8t89 Ag 164.
(MIRA 17-11)

(m)/F-VjP(t)/EWP( )IF-WP(b)1F.V1A(r,) jD/iff,
L5019-66 EVfr k
ACC NRs SOME CODES Uft/0286/6 /01-13/011-3
AP5022041 5/000/014
Y Cf, 0
AUTHORS: Paton, B. Ye.; Pudko, D. Hedovar, Khrundzhe Mol
P 7 rekhtiff, r~c.
L,,its,7uk-Khudi!%, V. A. Sayenko, Ni, I' L.; ly~~ -~e
'(q-t5'~Salov Ye. M. Baran
S. Vo
OROS none
TITLE. Amethod for,obtaining two-layer-rolling. Class,49., No* 173115ttute I
Iof Electrit: Welding im -0
Ye 0 ~Faton, AN UkrSSR (Institut elaktrouvarki AN U krM2/j
3OUW8z Byulletenl izobreteniy i-tovarnykh znakov,j, no.. 14, 19659, 113
TO 'C TAGS metal rolling, metal claddint Iindustry
mea
ABSTRACTS This Author Certificate presents.a method for obtaining two-layer:
4
rolling by lining a plate ingot with a solid plate. To produce proper adhesion
between the layers., the plate ingot is l1ned with aplate of cladding metal to
which is welded a plate of metal an elogous in composition to the one being lined.
SUB CODB: IEI MV SUBM DATE 1--64Ju163/ ORIG REF: 000/ OTH REFS 000
.CArd
(2:) 7 07-:,?- 3

ACC N.Rt AP6035713 SOURCE CODE: UR/0413/66/000/019/0058/0058
INVENTOR; Maksimovich, B. I.; Dudko, D. A.; Khrundzhe V. M.
ORG: none
TITLE: Electroslag welding of low-melting metals and alloys with high heat con-
ductivity. Class 21, No, 186586
SOURCE: Izobreteniya, promyshlennyye obraztsy, tovarnyye znaki, no. 19, 1966, 58
TOPIC TAGS: electroslag welding, A di-n:z, Jxke~x heat conductivity
low temperature metal, metal property
ABSTRACT: This Author Certificate introduces a method of electroslag welding of
low-melting metals and alloys with high heat conductivity. To obtain high-quality
welds, the lower part of a nonconsumable electrode, which is immersed in a slagbath,
is enclosed in a refractory .tube*and in this way is electrically insulated from the
molt-enslag leaving only the face of the electrode in contact with the alas.
SUB--CODE: 13/. SUBM DATE4*.'l3May65/
Car'~ 1/1 UDC-' 621.791.793

KALITA, P.G., gornyy inzh.; SHKOLYARENKOI F.N., gornyy inzh.;
KHRUNIC zh.-elektromekhanik -
Analyzing the work of the Yurkovo open-pit coal mine of the
"Vatutinugoll" mining administration. Ugoll Ukr. 9 no.12:
24-26 D 165. (MIRA 19:1)
1. Rudoupravleniye Vatutinugoll.

KHRUNIQW, Yuo A.
"Investigation of Automatic Processes of Electrode Production." Cand Tech
Sci., Moircow Order of Labor Red Banner Higher Technical School imeni Bauman, Min
Higher Education USSR, Moscowj 1955. (1:L, No 15., Apr 55)
so: sum. No. M., 2 Nov 55 - Survey'of Scientific and Technical Dissertations Defended
at USSR Higher Educational Institutions (16).

- MMURICHEV, lu.A.
Productivity analysis of automatic electrode velding machines.
. . [Trudy) MM no.38:181 196 '55. Oaft 9:8)
(Ilectrods;-Welding)
i -

'P, A~/A/ / C- //,- V, b. /) -
, Y
ABRMOVICH, I.I., prof., AIMINDER, AsG;, Insh., ANTOSHIN, Ta.V.. lnzh.,
ARKHANGILISKIT, L.A., Insh., ASTAr1YZV0 B.S., kend. telchn. nauk.
AFAHASITEV, L.A., iazh.1 1,31ARGSHTM I.I., lash., BORISOV, Yu. B.,
insh,., red., BTALYT, I.L., Insh., ;~VVITUff,. A.M.. in'zb., GERMAN,
D.11s., lnzh., GINZBURG, Z.g., insh., GOAOSHKM. A.K.,inzh.,
TmoKimcnix, mr., inzh., zuIM, V.A. ka ad. teldhn. nauk,
ZABTYATIV, Te. I.,kand. tekhu. nauk, Cdecesseal, ZCB19i, V.S., insh.,
IVMOV, G.P.,kand. tekhn. nauk, XAPRANOV, P.N., iuzh,, KONDRATOVICH,
V.7771- inzh., XOSTJ9t3v. S.K..i~zh.. KOVAL' SKIT, N.N., lnzh., KNUGLTAK,
L.A.,-inzh.,LUXTANOV,T.P,, inzh. LVIDUS, A.B., kand.' tekhn'. nauk,
LIVSHITS,G.A.j kand.tokha. nauk, LISWSKIT,I,.H.,inzh.,xrGAL33TA,
Te.Ta.,inzh*,NOSK1%R.A., kand, takhn. nauk; PRONIKOV,A.S.,
doktor tek-hu.nauk,.=1R3k,Z.L..kand. tekhn'. nauk, RUDYK, M.A.,
inzh.,SOKOLOVA,N.V.,inxh SAKLINSKIT,V.V.,in%h.,SAKffAROT, V.P.,
Cx_~',TXACHX*Si1T.
inth., TOKARI, X.M.j G.t.,inzh
na If F,~e
-,,Tu.A.,kand. takhn. 'uk, TSOPINOX.G., inzh., red.; iM-ffit"OOL
liz so 30KOLOYA,T.F., takhn. red.
[Handbook for machinists of machinery pleats in two volumep] Spravochaik
mekhanii~a mashin6stroitell nogo savods v dvukh tomakh. Most-va, -,Goo.,
nauchno-tekbas,1xd-vo masbinostrott. lit-ry. Vol. 2,[The tecbnology
ot repair work] Tekhnologiia reciontao 0tvs red, tome IU. S. Boriaov,
1958. 1059 P. (NIZU il,;10)
(Nachinery--Mainteuanoe and.repa~r)
(Machine-shop practice) '

t a
all
CIE fill Ill j1,111,11,1111,
MLL-

KAUFMAN, Mikhail Simonovich; KUZNETSOVA, Anna Alekseyevna;
Dmly-Andreyevirehj BRODSKIY, S.I., red.; BORUNOT, N.I.j
tekhn. red.
[Manufacture of spirals, grids, and leads of electronic
vacuum devices]Proizvodetvo spiralei, Betok i vvodov elektro-
vakuumnykh priborov. Moskva, Gosenergoizdatp 1962. 262 p.
(KIRA 16:4)
~(Blectron tubes)

MUNOV) Hope
Signalizotion on automobile roads snd city strecte.Proc.Cen'tr.Autoexploit.
inst., 1934,Not7-

"Effective Application of, Altermtin Current "ela-.vs for Srlu3i Equipment
on USSR No. 2,
Vol 61
Avtonatika i Dilekhanika, io. 2, 3, h, 5, (19U).

FLIT, S. M. at. nauafin' aotr. i POLYAKOVj A. A. - kand. tekhn. nauk i
KUDUAVTSEV., 0. K. - o. at. nauahin. sotr. i GUREVICHO L. V. Kande tekhn-
.nauk i MMOVO N. P. Kand. Ukhn. nauk
Akadwaya koumnallnop khQzyayatva Ime K, D. FamfUova
Oanovnyye Maropriyatiya p0 Gbespechaniyu Bezopasnouti Dvizheaiya V Gorodakh
Page 79
SO: Collection of Annotations of Scientific Research Work on Construction, completed
in 1950.
Moscow, 1951

GURVICH,L.V.; YAMPOLISKATA,T.G.; KMUYLVA,L.B.,' KOMIOV,N.P.. redaktor:
OTOCHEVA,M.A., redaktor; PWRCNSKAYA,Te., tel9-nfcl'e';-k-Y"'iedakor
[Road traffic signal Dorozhnye signallnyo snaki, Moskva. lid-yo
Ministerotva kommunallnogo khoziaistva RSFSR, 1935. 46 p.
(Traffio-regulations) (MLU 9:2)

__gMLIIOVA. Agpe, aepirunt; SMEWY. H~So, professor# zaveduyushchiy; 7URABOY, N.M.,
nauk, direktor.
Novocillin in the treatment of.early forms of syphilis, Vest.venA derm. no,
4:51-53 Jl-Ag 153. (MM 6:9)
1. Otdel sifilidologii TSeutrallnogo kozhno-venerologichiskogo instituta
Hinisterstva zdravoolthraueni7a SSSR (for ~Taelov). 2. TSentrallnyy kozhno-
venerologicheakly ~netitut Ministerstva zdravookhraneniya SSSR (for Turanov).".
(Syphilis) (Penicillin)