SCIENTIFIC ABSTRACT PODPEROVA, A. - PODRAZHANSKIY, A. S.
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP86-00513R001341510014-1
Release Decision:
RIF
Original Classification:
S
Document Page Count:
100
Document Creation Date:
November 2, 2016
Document Release Date:
June 15, 2000
Sequence Number:
14
Case Number:
Publication Date:
December 31, 1967
Content Type:
SCIENTIFIC ABSTRACT
File:
Attachment | Size |
---|---|
CIA-RDP86-00513R001341510014-1.pdf | 3.13 MB |
Body:
"In
J4,
-X 1 0Z--,Rj i, Z 11'. L A - 5,
iz!j'tj by )j~j- Ille 1--tj --ra
Ck,! n; i~4,Me b- (Clii~
r
ings,
HEGTI, R.; HORACEK, J.; LONGAUSR, E.; PODPEROVA, M.
Ihecylenic acid in the tratment of psoriasis and other der-
matoses. Lek.listy 6 no-5:151-154 1 Mar 51. (CLML 20:6)
1. Of the Dermatological Clinic of the Slovak University. Brati-
slava (Head--Prof. J.Treger,M.D.) and of the Dermatological Clinic
of-M&s&x7k, University in Brno (Head-Prof.A.Tryb,M.D.). Authors mire
M.D.Is.
PODPOLIN~~;,.S.A. Prinimali uchastiye: YUMASHEVA, T.I., ass.;
RODIONOVA, Ye.I., kand. med. nauk
(Municipal polyclinic] Gorodskaia poliklinika. Moskva,
TSentr. in-t ugovershenstvovaniia vrachei, 1963. 259 P.
(MIRA 16:11)
1. Kafedra organizatsii zdravookhraneniya TSentrallnogo
instituta uso7orshenstvovaniya vrachey (for Tumasheva,
Rodionova).
(CLINICS)
PODPLETM. M. I.
Student brigade of a boarding school. 31ol.v shk-ole no-3:47-51
*-Te '59. (itIRA 12: 9)
1. Direktor shkoly-internata Na.2 Sal'skogo rayona Rostovskoy
ablasti.
(Sallsk District-Agriculture-Stud7 and teaebing)
i
, ?/l ..
PODFMIN, I., kapitan.
, -Tr-!Mlnng mortar course members In independent action in firing.
Voen.vest.36 ao*2:56-58 7 '57; (MLU 10:3)
(Nortare(ordanance))
33934
6/079/62/032/001/012/016
,9 .2 J9 Q11 D204/D302
AUTHORS3 Kormer, V.A., Petrov, A.A., Savichg I.G.9 and
Podporinag T.V.
TITLE: The kinetics and mechanism of the addition of lithium
butyl to vinyl ethyl acetylene
PERIODICAL: Zhurnal obshchey khimii, v. 32, no. 1, 1962, 318-319
TEXT2 LiBu was reacted with vinyl ethyl acetylene (I) in undecane
at 20 and 30OC9 under argong in molar proportions of I -~ 1 and 1 g
2. At 200C the reaction gave an allene hydrocarbon (II) in 56 %
yield after 20 hours. Concentrations of I and II were determined by
infrared spectroscopy. The reaction proved to 4e kinetically of the
o = 0.1333
f-Irst order, with velocity constants K20o = 0.0643, K30
hr-*1 and with an energy of activation equal to 12.7 Kcal/mole. The
rate controlling process is thought to be the monomolecular decom--
position of a complex which forms as an intermediate stage. It was
also observed that I decomposes faster than II is formedg especial-
ly at the higher temperature and when I was in excess. This is as-
Card 1/2
BURKOV, V.V#,j FODFORINAP Ye.K.
Morphology and genesis-of streniiuft-b~aring barite concre-
tione in the Mangyablak Peninsula. Trudy IMRE no.17:33-46
163. (WRA 16: 11)
BURKOV, V.V.; PODPORINA, Ye.K.
Geological and mineralogical characteristics of some
strontium deposits in the Mangyshlak Peninsula and Northern
Caucasus. Krat. soob. IMGRE no.1:101-103 160.
(MIRA 17: 3)
BURKOV 3. V.V.; PODPORINA, Ye.K.
Rare elements in kimberlites. Dokl. AN SSSR 163 no.1219-1-200 Jl 165.
(KRA 18.-?-.
1. Institut mineralogii, geokhimii i kristallokhimii redkikh elementov.
Submitted FebruarY 4, 1965.
PODPORM., Ye.K.
Celestite in Tithonian sediments of the Kislovodsk region.
Trudy IMGRE no.7:118-122 161. 1 (MIRA 16:3-1)
BURKOVY Vladimir Viktorovich; PODPORINA Y2ygeniya Xuzlminichna;
SERDYUCHENKO, D.P., do or geol.- neral.nauk, otv.red.;
VIASCIVP K.A., glavnyy red.; GRISHIRA, T.B., red.izd-va,-
GUSIKOVA, O.M., tekhn.red.
(Strontium; mineralogy, geochemistry, and main types of deposit
Strontsii; mineralogiia, geokhimiia i glavnye tipy mestorozhden1l,
Moskva,, Izd-vo Akad.,hauk SSSR, 1962. 178 p. (Akademiia nauk
SSSR. Institut mineralogii, geokhimii i kristallokhimii redkikh
elementov. Trudy, no.12). (MIRA 16:2)
1. Chlen-korrtsPondent AN SSSR (for Vlasov).
(Strontium)
BEMAYEV, Georgiy Sergeyevich; TARACBNIKOV, Petr Isayevich; PODPOPIM p
~V.G. doktor tekhz6 nauk# reteenzent; ANSMVI M.A. OWO
~;~. naukp redol VAY&M'Ijr D&Bap )jmde tekl~. mauk, red.
K=;;Yl, G.N.., red.izd-va; CHFAS, red. izd-val SHGHETININA.,
L.V-..,',-tekbn. red.
[Technological process*#.i* the mamifacture of shafts] Tekbnologiia
proizvodstva valov. Mashgiz, 1961. 250 p.
(MIRA 15:2)
(Shafting)
SlUpd4ov, V.S.; KAI-EIISKIY, M.D.; ~QPPQR It
K I I -V-G KELISKIY, I.I.;
Llf -,_; DUI
NEBUIT, L.11z; ZZAIZSSJJY, A.".%; KOSTEUKO, M.V.; RWDONa-.Y V.S.;
SFCIER13ACMV., O.V.; WPATIN, I.A.; 1'-,'jA.EC;l:TOVJ" 1.2%; FILARREXVI
S.N.; KRYUROV, K.P.; SIIW,,LOBOV, K.S.; BOSIINYAKOVICH, A.D.;
BURGSDORF, V.V.; NOVGORODTSEV, B.P.; GOKIIBERG, M.M.; STEFAIIIOV, K.S.
Nikolai Pavlovich Vinogradov; obituary. Elektrichestvo no.10:
91-92 0 161. (MIRA 14:10)
(Vinogradov, Ilikolai Pavlovich, 1886-1961)
:),~r i . ,
~
FCDFC-R,lJl;,V.G., Doc Tcch Sc-i-(diSO-1
Lcn~ 195P- 31 rn (7--in uf III, t 11.1-1
150 co- ic'n (1~,, 17-53,132)
ACC s NR:
AUTHMS:
AT7005727
todporldn, V. G.; Alenin, 1". P.
ORG: none
s~buti d~ IEI~~6~166160bl~6~1008010082-
TITLE: Torques during coarse tooth cutting of heat resistant steel M'135VTYU
0
KUM: Leningrad. Politekhnicheskiy institut. Trudy. no. 267, 1966. Avtomatizatsiya
i tei~~ologiya mashinostroyeniya (Automation and technoloey in the machinery industry),
80-82
TOPIC TAGS: Ametal cutting, gekr cutting machine, tool ai4qy, steel/ na?35V-jYu steel,
4M steel, VX8 tz=L alloy, TWO:tac& alloy, 5312 gear cutting machine
ABSTUCT: Experimental measurements of the cutting torques required during coarse
gear cutting of steel IW35VTYu gear teeth as a function of cutting parameters were
made and compared with cutting torques required for 40Kh steel teeth. A modern gear
cutting machine (model 5312)(Was used with aA*Ulle-tooth miller of 160-mm diameter
plated with hard alloys VK8 for ~toel KhN35 U and TWO (for stool 4M). Curves
of cutting torque as a function of cutting speed (v --20--200 m/min), feed (Sz =
0-04--0-4 mm/tooth), modulus of cutting wheel (m - 2- 6 mm) and tool wear (h3 = 0.1--
0-5 mm) are presented*for the two metals, and empirical equations are derived from
these results in the form:
ACC NR: AT7005727
MXP=156,5i~-o-l3S.0-56mo-53h,0,69- kgm (steel Eh'135VWu);
MNP 3W""S,"'W-hO-'- kgm (steel 40Kh),
and
N, = 0,213V"7SO,--%mO -5'h.O,-fi9 kgm (steel IW35VTYu)p
0,048tP"OSO-'2n?AhO,I kgm (steel 40Kh),
respectively. In generaly the cutting torque for the heat-resistant steel is 2.5--4
times higher than for steel 40Kh. Orig. art. has: 12 formulas and 4 figures.
SUB CODE: 13/ SUBM DATE: none/ ORIG REF: 002
Card 2Z2
VULIF, A.M.. U r. pro ... doktor tekhn. nauk, retsenzent;
Lh~g~, ~.. , Md. tekhn. nauk, red.; KUREPINA, G. H. P
red.izd-va; SPEROSKAYA, O.V., tekhn. red.
[Metal cutting] Rezanie metallov. Moskva, Mashgiz, 1963.
427 p. (MIRA 16:9)
(Metal cutting)
25(l) PHASE I BOOK EXPLOITATION SOV/3457
Podporkin
Obrabotka nezheatkikh detaley (machining-of Nonrigid Parts).
Moscow, MaoWz, 1959. 207 P. Errata slip inserted. 4,000
copies printed.
Reviewer: Ye.I. Zazerskiy; Ed.: A.N. Ogloblin, Docent; Eds. of
Publishing House: I.A. Borodulina and A.I. Varkovetskaya;
-Managing Ed. for Literature on Machinery Manufacturing (Leningrad
Division, Mashgiz): Ye.P. Naumov, Engineer.,
PURPOSE: This book is intended for technical personnel of machinery-
manufacturing plants and scientific research Institutes.
COVERAGE: The author dic6fes the characteristic features of the
michining and'cola straightening of nonrigid machine parts. '
ConsJderable attention is paid to the analyiis of elastic defo'r-
mations of..the system maebine-Itool-work-cutting tool when shafts
and common nonrigid parts are mounted by different methods for
Card 1/ 5
Machining of Nonrigid Paris .90V/3457
machining. He also discusses methods used for Increasing pre-
cision of machining, and ways of damping vibrations.' The
theoretical principles of calculation are illdstrated by ex-
perimente,* and accompard'e"cl by practical recommendatio'ns. No
personalities-are mentioned. Thei%e are 32 references) all
Soviet.
TAKE OF CONTENTS:
Introduction 3
Ch. I. Cold Sirkightening of Nonrigid Parts by Plastic Bending 7
1. General remarks
2. Defortiation ind residual stresses
3. Deformation and residual stresses
distorted by e 'xternalforces
4. Deformation and residual stresses-in
5. [Bending] moments in straightening
6. Check experiments
7
In ordinary straightening 11
in straightening parts
30
two-way straightening 39
45
54
Card 2/ 5
Machining of Nonrigid Parts SOV/3457
Ch. It. Elastic Deformation of a System With a Shaft Supported on
Centers 64
l.. Rigidity of mounting between centers 64
2. Forces acting on
the centers of the machine.-tool 67
3. .
-Deformation of a'system caused by transverse forces 71
4; Deformation of a system due to axial forces 79
5. General expression for the pliability of a system 85
6. Deformation of a system under a vdriable.imdlal cutting
for,ce 89
Ch..III
.
Increasing.Accuracy of Machining by Displacement of the
,
,
System and by Equalization of it,s,Pliability I 94
1. Changing the initial position of'thelaystem 94
2. Equalization of the pliability of the system In machining
plain shafts 98
3. Class~gication of shafts by their rigidity 109
4. Equalization of the pliability of the system in machining
stepped shafts 113
Ch.-.IV. Elastic Deformation of a System With'the Shaft Carried on
Centers and Rests 116
Card V5
Machining of Nonrigid.Parts SOV/3457
1. Rigidity of holding in a rest n6
2. Mounting on centers and a stiady rest 118
3. Mounting between centers and a follower'rest 125
4. ting between ce'nters and two.rests
Noun 129
5. '
Comparative ekperizients 131
Ch. V. Elastic Deformatton of a System With Shaft Carried in a
Chuck, Tallstock Center and Rests 137
1. Rigidity of fastening in a chuck 137
2. Mounting in ch4ok and tailstock center 143
3. Mount4ag in chuck, tallstock center and steady rest 153
4. Mountftln chuck, tailstock center and follower rest 157
5. Comparative experiments 160
Ch. VI. Inaccuracy in Machining Shafts 166
1. Gefteril remarks a66
2. vDimensional"wear.4nd thermal deformations of the tool 168
3. Errors, of the machine,' tool, and fixture's 1z6
4. Determination of the total erroir'of machining
Cavd-4/5
Machining of Nonrigid Parts
SOV/3457
Ch. VTI. Damping of Vibr 'ations ift Machining Nonrigid Shafts
1.* Damping.of vibrations by artificial resistance
2. Vibration-damping follower rest
3. Vibration-damping steady rest
Bibliography
AVAILABLE: Library of Congress (TJ 1160 P78.)
Card 5/5
190
190
197
201
205
f
VK/J*b
4-1-5-60
PODPMKIN. T.G.
Center-rest vith a vibration &mer. Stun.i instr. 24 no-7:12-i4 ji '53.
(MLRA 6:8)
(H&chine tools)
SOV/122-59-3-20/42
AUTHOR: _R9 n, V.G. (Candidate of Technical Sciences, Do-s~it*
_qporki 1. ,,
TITLE: Classification of Shafts According to their Rigidity
(Elassifikatsiya valov po ikh zhestkosti)
PERIODICAL: Vestnik Mashinostroyeniyaj 1959, Nr 3, pp 64-67 (USSR)
ABSTRACT: Errors when turning shafts can be reduced, not only by
increasing the rigidity of the lathe and tool, but also
by ensuring constant elastic deformation of all elements
during the turning operation, and by matching the elasti:,
deformation of the shaft to that of the lathe. The
elastic deformation at any point on a shaft being turned
between centres is expressed in formula (1) which
includes terms and e for the elastic deformation or
%e latRe tail and head stocks respec-tive-
displacement of I
ly. The terms within the square brackets can be combined
to give the term ei in formula (2). Transverse er-f-o-I-E. '
such as ovality, are generally due to inconsistency in
the tool force Py; longitudinal errors, as out of
parallelism, barreling or waisting, are due to the varying
elasticity of the system a'ong the length of the shaf-"-.
L
Card 1/4 Fig 1 illustrates the relative magnitude of error si (in
microns per kg. of tool force) along the shaft for
SOV/122-59-3-20/1+2
Classification of Shafts According to their Rigidity
a
different values of the ratio k = I/d where 1 is the
length and d diameter of the shaft. It can be shown that
minimum error will obtain when the rigidity of the shaft
and the rigidity of the tail and head stocks (assumed to
have equal rigidity equal to ce) bear the relationship
given in Eq (3). For usual practice, where he shaft
being machined is turned end for end when the cut has
traversed half the length of the shaft, minimum out of
parallelism error will obtain when k is related to e3
and En as in Eq (6). Thus from Eqs (3) and (6) it can
be seen that the rigidity of the lathe should be matched
to that of the shaft if minimum longitudinal error is to
be attained. Therefore, a system of classifying shafts
according to their rigidity will be useful. The length
over diameter ratio, k, is not satisfactory, since with
the same 1/d ratio, stiffness increases as d becomes
larger. Also, the classification should take into
account the normal rigidities, F-3 ~nd En of the tail
and head stocks of the lathes in which shafts are
Card 2/1+ machined. Therefore, shafts should be classified as
rigid, medium, or flexible according to whether
SOV/122-59-3-20/1+2
Classification of Shafts According to theirRigidity
a.0 = k3/24d is less than, equal to, or more than (63+6n)
Using normal values for rigidity and E 2
of 83 ni
it is founds for rigid shafts e 4 0.2 microns/kg;
for medium shafts E~ = 0.2.to 1.8 microns/kg; and for
flexible shafts c > 1.0 microns/kg. This classifi-
cation is presentea graphically on a log-log basis in
Fig 2 where the shaft diameter is given on the ordinate,
and the critical rigidity ep on the abscissa for various
values of k = 1/d. Examples are given of the usefulness
of this graph to calculate appropriate shaft length to
diameter ratios to attain a given parallelism requirement,
or for selection of required rigidity characteristics in a
lathe to turn a shaft of given dimensions. Modifications
are given to deal with the case of a stepped shaft9
dimensioned to give approximately constant bending resis-
Card 3/1+ tance along its length. In this case the critical
SOV/122-59-3-20/42
Classification of Shafts According to their Rigidity
flexibility is found to be 1* times that of a
corresponding parallel shaft.
There are 2 figures.
Card 1+/)+
ROZENBUT, Grigoriq Borisovich- PODPRUMIIKOV VasiIi7 Ivanovich;
'- MIIMT'Fa-r~ovid"';
KIGHKIN, Viktor Vasil7ye ~Icn;'~ -
KATRICH, Aleksandr Nikolayevi-,h; ZAVGZD.', L.F., -ved. red.
(The USB-2m high-speed plow] Bystrokhodnaia strugovaia usta-
novka USB-2m. Moskva, Nedra, 1965. 136 p. (MRA 18:8)
PODPRYADOII, B.N., Inzh.
Machines on the approach tracks. Put' i put. khoz. 01 no.2:41. 165.
1. Stantsiya Likhobory, Moskovskoy dorogi. (MIRA 18:7)
MTOV, V.M.; FODPRYADGV, B.N.
Greation of track workers' cities is an urgent probj.&m. putt
:1,put. khoz. 9 no.1l.-g 165. IMIRA 18:11)
1. Starshiye inzhenery Gosudarstvennogo instituta tekhniko-
ekonomicheskikh izyskaniy i proyektirovaniya zhaleznodorozh-
nogo transporta,
-PODPRYADOV, B.N.
Improve the I"crms of pblic A Vjtlv,,r7, 3 ?, -
..S a na
1
31-32 '64. fj~'.
i I _ 1'7. 9 *
1. Starshiy inzli. otcliela putil', stan-~sl~ya Likhobory, MlOskcvqk.-,y
dorogi.
SOV/124-58-11-13134
Translation from: Referativnyy zhurnal, Mekhanika, 1957, Nr 11, p 180 (USSR)
AUTHOR: Podporkin, V. G. -
-------------
TITLE: Cold Straightening of Nonrigid Shafts (Kholodnaya pravka
nezhestkikh valov)
PERIC~)ICAL: Tr. Leningr. politekhn. in-ta, 1957, Nr 191, pp 110-138
ABSTRACT: Formulas are derived for the determination of the characteristic
parameters of the straightening process (restoration of an original
straight-line shape) of slightly bent shafts. Consideration is given
to the case in which the article was initially free of any initial
stresses and strains and in which the bending has created therein
specified residual stresses and strains. Also studied is the case
of two-stage straightening; however, here the change in elast'ic-
plastic properties in the metal owing to repeated loads is over-
looked. The formulas are valid also for a material which has a
yielding region up to a certain strain, but which, upon still
greater strain, exhibits a linear work-hardening. Graphs are
adduced showing the residual str -&- in straightened articles.
~ ~Azs;t
Card 1/1 V. V. Moskvitin
PODPRYADOV. Ilikolay,Androyevich; XkRGOLIN, Ya.A., red.; SOROKIN. N.P., red.;
. ---
.-P.' *',-' 6khhered.
[Fighting drifting sand on railroad tracks] Bor'ba s poschanymi
zenoommi no zheleznykh dorogakh. Koskya, Goo. transp. shol.-dor.
Ud-vo, 1958. 134 p. (MIRA 11-.4)
1.9milroads-Track) (Send)
PODPORKIN, Viktor Crigorlyevich
,for Doe of Technfieft Sci on the basis
of dissertation defended-29 Doe 58 in Council of *be LonloWt Poly-
MwImi"fy-
technical InstiOmb* im. Kalinin, entitled: *I;Lp**"~i of Non-Rigid
Partn"., (EMViSSO USSR, 2-619 30)
408
PODPORM, Viktor Grippg.,' ~ch- BOLISHAKOV, Sergey Anisimovich; VULIF,
_~V ;we, k, -
'ti tekha. ots., reteenzent; ANSZWV, X.I., kand.
naux, d
tekhn.nauk. doteent, red.; HUNITSKIT. L.M., kand.tekhn.nauk,
redo; BORODULINA, I.A., red.ixd-va; PMISUYA. R,.,G.. tekhn.red.
[Cutting tools and m6tal machining] Tochenie metallov i reziny.
Pod.red. K.A.Anserova. Izd.2., dop. i perer. Koakva. Gos.nauchno-
takhn.izd-vo mashinostroit.lit-ry, 1958. 145-p. (Bibliotecbka
tokaris - novators, no.2) (MIRA 12:3)
(Cutting tools) (Turning)
CIPODPOEXI G.- ZAZER IY, Ye.I., inzh., retsenzent; OCLOBLIN, A.N.,
A
dofsenz.-Tw~-, BORODULINA, I.A., red.izd-vA; VARKOVETSKAYA,
A.I., red.izd-va; SHCHETININA, L.V., tekhn.red.
(Machining nonrigid parts] (Ybr3botka nezheatkikh detalei.
Moskva, Gos.nauchno-tekhn.izd-vo mashinostroit.lit-ry, 1959.
207 P. (MIRA 12:12)
(Metal cutting)
9X;7!1,0PTA MICA See 6 Vol 13/7 Into-mal Led. Oiily 50
3612. PROBLEM OF DETERMINATION OF THE VOLUME OF RED CELLS
(Russian text) P od r a b i n e k P. A. - LAB. DELO 1957, 2 (10-13)
The author criticizes 1h-f-WMdre-Zf-3oku"V- Determination of the volume of red
.cells in Panchenkov's apparatus', using data of the comparative determination of
the volume of red cells with the aid of a haematocrit and Panchenkov's apparatus. (S)
PODRABINEK, P.A.
Determining the volume of er7throcytes. Iab. delo 3 no.2:10-13
Mr-Ap '57 OCLRA 10:5)
1. Iz gorodskoy ob"yedinannoy bollnitsy (dir. S.V. Afanaslyev),
Blaktrostall.
(BRYTHROCYT]IS)
PODRAB INEK, -
Portable rack for the determination of the erythrocute sedimentation
reaction. Lab.delo 5 n0-5:45-46 S-0 159. (MIRA 12:12)
1. Iz glektrostallskoy obwyedinennoy bolinitsy (glavnyy vrach S.V.
Afanaelyev), glektrostall.
(BLOOD-- SM I MENTAT ION)
PODRABINEK, P.A.
Making a correction to the volume of erythrocytes in the erythrocyt,*-
sedimentation reaction. Lab. delo 7 no.5:35-38 My 161
(MiM 14: 5)
1. Istomkinskaya bollnitsa Moskovskoy oblasti (glavnyy vrach D.D.
Przhedetskiy). (MTHROCYTES)
SOV/177-58-11-21/50
AUTHOR: Podrabinek, P.A.
TITLE: The Determination of the E.S.R. inInclined Capillaries
PERIODICAL: Voyenno-meditsinskiy zhurnal, 1958, Nr 11, pp 61 -
64 (USSR)
ABSTRACT: I. Roshonok (1937), K.A. Aleksandrov (1938), L.I.
Rogova (1940) and I.G. Burchinskiy (1948) indicated
that the inclined position of capillaries in deter-
mining the E.S.R. may serve as source of considerable
error,and they recommended using capillaries in
strictly vertical position. Proceeding from the fact
that erythrocyte sedimentation occurs more rapidly
in inclined capillaries than in vertical ones (Fuen-
te-Gita), in the last ten years many foreign authors
and D.B. Marshalkovich developed and suggested me-
thods of accelerated determination of the E.S.R. in
inclined capillaries. By means of a support equal
to the one suggested by D.A. Marshalkovich, the
Card 1/3 author investigated the sedimentation of erythrocytes
SOV/177-58-11-21/50
The Determination of the E.S.R.. inInclined Capillaries
at different angles of inclination of the capillaries
and revealed that the velocity of the B.S. - rises
with the increase of the angle of inclination. S.D.
Balakhovskiy (1928) has shown that in inclined capil-
laries the blood stratifies into two parts. Based
on his own investigations, the author concludes that:
1) In determining E.S.R. in capillaries, inclined at
an angle of 200, the sedimentation of erythrocytes
in the course of 11 minutes has nearly the same value
as in vertical capillaries in 1 hour. 2) In inclined
capillaries, simultaneously with an increase of E.S.R.,
the velocity of the sedimentation relatively reduce
In determining E.S.R. in capillaries inclined at 20
in the course of 11 minutes, it is necessar~,,proceed-
ing from the value of the E.R.S. of 20 mm, to intro-
duce correction by adding to the found value of the
sedimentation the half of it. 3) The introduced
correction of the E.S.R. value does not relinquish
Card 2/3 the individual divergency in the indicators of the
SOV/177-58-11-21/50
The Determination of the B.S.R. in Inclined Capillaries
E.S.R. to be determined
pillaries. In order to
necessary, for example
lary during 15 minutes,
hourly E.S.R. There is
in inclined and vertical ca-
escape errors, a control is
an B.S. in a vertical capil-
which shows the approximate
1 Soviet reference.
Card 3/3
P~OIDRABDMK.
Utilization of the Riva-Rocci sphygmomanometer for detemining
0
capillary resistance. Sov. med. 25 no.4:125,-126 Ap 162. (IlIiLA 15.6)
1. Iz Elektrostallskoy ob"yedinennoy beltnitsy (glavnyy
vrach S.V. Afanaslyev)
(CAPILLARIES (SPHYGI40MANUIC, TER)
PODRABDIEK, P.A.
Data concerning the role of hemotonia in erythrocyte sedimen-
tation reaction. Trudy mol. nauch. not-r. MCNIKI no.l.-234-240
t59, (MIRA 16:11)
1. Iz gorodskoy ob"yedinennoy bol'nitsy g. Elek-trostall i
nauchno-eksperimentallnogo otdela (rukovoditell doktor med.
nauk O.-I..Voronkova) Moskovskogo oblastnogo nauchno-issledo-
vateltskogo klinicheskogo instituta imeni Vladimirskogo.
POMRAIBIMM, P.k.
Affect of compaction of erythrocytes on erythrocyte sedimentation
rate. Biul.eksp.biol.l, med. 48 no.12:51-54 D 159. (KIRA 13:5)
1. is gorodskoy olilyedinannoy bollnitsy (glavnyy vrach S.T. Afanael-
ye,r), g. Blektrostall. Predstavlena, daystvitelln" chlenom ANN SSSR
V.T* Phrin"-
iBlooD sormunow)
PODRAP,U=
Relation between erythrocyte sedimentation reaction and the
quantity of erythrocytes in the blood. Trudy mol. nauch.
sotr. MaMIKT no.11241-250 159 (MM 16til)
1. Iz gorodskoy ob"yedinennoy bollnitsy, g. Mektrostall i
nauchno-eksperimentallnogo otdola (rukovoditell doktor mod.
nauk O.I.Voronkova). Moskovskogo oblastnogo nauchno-iseledo-
vatellskogo klinicheskogo instituts. imeni Vadjmirskogo.
Or
PODROINEK, P.A. (g.Elektrostal')
Brythrocyte sedimentation r6ACtion. Felld. i akush. 21 no.4:58-59
A-D '58. (MIRA 11:4)
(3WO-SEDIMENTATION)
PODRABINEK, P.A. (Blektrostall)
Nodern concepts of the mechanism of erythrocyte sedimentation rate.
Usp.sovr.biol. 48 no.1:7-4-87 JI-Ag 159. (MIRA 12:12)
WOOD SIDIKWATIOI)
USSM/Human and JM-Arzil r-hysiology - Dlo.:)(~. F or mcd Elements. T-3
Abs Jour : RLA' Zhur - Biol., No 18, 1958, 84012
Author : PoO_-abinck,
Inst
Title : Oh,'. 1-rol1em of '_ie Volume of ErythrOcyLos.
Orig Pub : Lanbor. delo, 19-57, No 2, 10-13
Abstract : As blooa volume indicators, Octerminea by the mcth-_)O
N.P, Sokolov (Klin. med., lgz,4, 32, 2) and in hcn~itic
chambers were compared, it was shown that the first arc
lover than the latter. Mien 1-ematic chambers arc use'l.
fluids are not secretec' by erythrocytes. It has,been cs-
tablisher! that a correlation exists between the crythrocy-
tes' setting time and the number of rotations of the cen-
trifuge. The capillaries of the Panchenkov apparatus with
a sowed off ungraduatcC. point replace factory naa~_c henntic
chambers. -- M.B. Gol'CbcrG
Card 1/1
PODRABILM-M, P.A.
Detertaining erythrocyte sedimentation rate at shorter intervals.
Yrachgdelo no.8:861 Ag 158 (MIRA 11.08)
la BolInItan goroda Elektrostall, Moskovskoy oblnsti.
(BLOOD-SEDIMENTATIOU)
,-PADRLBINEK, P.A .~.SILANTIUVA, S.M.
FmaliLation of Vald-n's cup.endothelial test (concerning the article
of KiV.Istcmina and V,A.Neiman published in "Iaboratornoe Delo'12
no.6, 1959). Lab. delo 7 no.3:26-27 Yr 161. (MIRA 140)
l.'Istomkinakaya bollnitsa (glavnyy vraah D.D.Przhedetakiy), Noginsk.
(LEUCOCYTOSIS), (PJMMATIC FVER)
PODRABINISK, P.A.
Evaluation of the fractional reaction of erythrocyte sedimentation.
ja
Vop. Idin. pat. no.3:140-146 161. 0 FA 14:12)
1. Iz Gorodskoy ob"yedinennoy bollnitsy, g. Elektrostall, Moskovskoy
oblasti.
(ERYTIUIOCYTES) (BLOOD-ANALYSIS AND C10,11STRY)
PODRABINEK) P.A.
Use of heparin as an anticop-gidant in application of the
erytbrocyte sedimentation reaction. Lab.delo 7 no.21:51-
52 N 161. WMA 14: 10)
1. Iatomkinskaya bollnitsa. Moskovskoy oblasti.
(HEPAIMN) (BLOOD-SEDnMTATICIR) (MTHWCYTF.S)
PODRABINEKO P.A.; KAZAKEVICH, I.I.
Physical principles of the change in the distribution of e-.7thro-
cy-tes in suspensions during the course of time. Biofizika 7
no.4:488-491 162. (MIRA 15-11)
PODRABINEKv P.A.
Electrophotometric determination of the osmotic resistance of' erythro-
cytes. Lab. delo no.1:24-28 164. (HIRA 17:4)
1. Istomkinskaya bollnitsa (glavnyy vrach - D.D.Przhedetskiy), Noginsk.
f
PODRABINEK, P.A.
Review of G.I.Burchinskii's book "Erythrocyte sedimentation reac-
tion." Lab. delo 10 no.3:189-190 164. MRA 17:5)
PODRABINEKY P.A. -1 --
Revie*-~-Of,-L-Todorovls book "Clinical and laboratory studies in
pediatrics." Lab. delo no. 12-.752-753,164. (MIRA 18:1)
PODRABD~-EK, P.A.
0
Physfcochemical foundations of the osmotic resistivity of
erythrocytes. Biofizika 10 no.1:118-122 165.
(14IRA 18: 5)
1. Istomkinskaya bollnitsa Moskovskoy oblasti.
ACC NRi AP601-21532 soma coDr-,: uR/o402/66/000/003/0371/0371
AUVAOR: Podrabinek, P. A.
ORG: Istomsk Hospital (Istomskaya bollnitsa, Noginsk)
TITIE: Effect of influenza virus on the resistance of erythrocytes
SOURCE: Voprosy virusologii, no. 3, 1966, 371
TOPIC TAGS: human diaeaao, virus disease, influenza, disease resistance, 4X000
ABSTRACT:
.,The effects of various'concentrations of influenza virus on human blood cells
Vere'determined. Resistance to hemolysis was reduced even when virus
preparations were used in*1!800 dilutions. The clinical method involved
wpa the acid erythrogram; it is recommended for influenza virus titer.
[WI A- .. 50; CBE No., 101
SUB CODE.- Wsm DATE: none/
PODRABIDEK, P.A.
Hydrodynamic properties of the erythrocyte, Biofizika 10 no.2-.367-
368 165. (MIRA l8s7)
. . 1. Istomkinskaya bollnitsa, Noginsk.
I
BABICHEVp Ye.A.; BUROVA, N,.N.5 GOLODKOVSKAYA, G.A.; DOBRUSKINA, I.A.:
KAGNER, M.N.; NONOPLEVA, V.I.; KRASILOVA, N.S.; LEONOV, G.P.;
MURZAYEVA, V.E.; PQ
,_DRAB1NEK,_R_A.; PRYAKHIN, A.I.; RYZHCV,
B.V.; SERGEYEV, Ye.14.,- FEDOFOV, T.O.; FIDELLI, I.F.; EPSHTEYN,
G.M.[deceased]; SHCHEKHURA, I.I., red.;.-GEORGIYEVA, G.I., tekhn.
red.
(Geology and engineering geology of the upper Amur Valley]Geo-
logicheskoe stroenie i inzhenerno-geologicheakaia kharakte-
ristika doliny Verkhnego Amura. Moskva, Izd-vo Mosk. univ.,
1962. 317 p. (MIRA 16:3)
(Amur Valley--Geology)
(Amur Valley-Engineering geology)
PODRABINIK, ?%.If
IJ I'l.
"Calcium and Phosphorous Balance in
Abiotrophic Children Fed Various Diets,"
Pedistriya, No. 3, 1948. Gen. Sci. Res.
Pediatrics, Inst., Min. Public Health IRSFSR,
-01948-.
C n KOVA, A.P.; PODRABINIK, G.K.
kw.
Certain characteristics of liver function in dysentary, in children.
Pediatriia, Hookya, No.3:32-34 May%-June 51, (CIKL 21:4)
1. Of the Clinic for Acute Children's Infectiing and of the Biochemical
Iaboratory (Head--Doctor Medical Sciences A.N. KvyatkovskRya), Central
Scientific-Research Pediatric Institute of the Ministry of Pablic Health
RSM (Director-Prof. S.P. Borisov).
POIRABINIK, GA.
Biochemical modifications of the blood in donors giving blood
over prolonged periods. Report no.l:Studies on the concentration of
protein and gamma globulin in the serum of donors. Biul. eksp.
biol.i mod. 41 no.2:45-47 F '56. (HURA 9:6)
1. 1z biokhimichaskoy laboratorii (zav.-kaudidat biologichookikh
nauk G.H. Podrabinik) i donorskogo punkta korevogo otdela (zav.
L.I. Orriianova) Khabarovskogo nauchno-ionledovatellskogo instituta
vaktainleyvorotok (dir. A.M. Krupnikova) Hinisteretva
zdravookhrmaeniya SSSR. Predstavlena daystyltelinym chlenom
ANN SSSR S.Ye. Severinym.
(BLOOD MANSFUSION,
donors, blood proteins in (Jius))
(BLOOD PROTNINS,
In blood donors (Run))
pLrotdu are
PODRABINIK, G.M.; PIKOVETS, P.T.* PIROG(AT, I.Ya.; LEVEMWEEN, A.V.
P
Dynamics of the content of proteins and ga=.a glebulir-s in
antidipbtheria sera in the process of the immunization of borses.
Nauch. oan. proizv. bakt. prep. 10:227-243 161. (MIRA 18t7)
1. Khabarovskiy institut epidemiologil i mikrobiologii.
PODRABINNIK, I.M.
New technological process for manufacturing spikes for heavy and
medium harrows. Biiil.tekh.-ekodoinform.Gog.nauchi-i~sl.inst.nauch.i
tekh.inform. no.9:72-73 163. ' (MM 16:10)
PODRA.BI11141KP I.M.
Review of G.D.Falldman's book "Cold extrusion of steel, Kuz.-
shtam. proizv. 5 no.12:45 D '63. (MIFA 17: 1)
PODRABINNIK, I.M.
The K960 single-crank simple-action press with 2,500-ton capacity.
Biul.tekh.-ekon.inform,Gos.nauchdfisal.inst.nauch.i tekh.inform.
16 no-4127-29 163. It (MIRA 16:8)
(Power presses)
PODRABINNIX, I.M.
-------
Using bottom drive in the manufacture of presBes. Biul. tek-h.-
ekon. inform. Gos. nauch.-issl. inst. nauch. i tekh. I-'orm. 17
no.2:24-27 164. (MIRA 17:6)
PODRABINNIK, I.M.; RODOV, Ye.M.
Rigidity of mechanical presses for cold extrusion and the accuracy
of parts produced. Kuz.-shtam.proizv. 7 no.2:24-27 F 165.
(MI&k 18:4)
S11 93/61/000/005/004/00 61
A004/A 104
AUTHOR: Podrabinnik I. M.
TITLE: The K383 closed-type double-crank press of 2,500 tons capacity
PERIODICAL: Byulleten' tekhniko-ekonomicheskoy informatsii, no. 5, 1961, 28-30
TEXT: ' The K383 double-crank press has been developed in 1960 by the SKB-10
of the GosudarstveraWkomitet Soveta Ministrov SSSR po avtomatizatsii i mashi:nc-
stroyeniyu (State Committee for Automation and Mechanical Engineering of thle
Council of Ministers USSR) and was built at the Voronezhskiy zavod tyazhelyld"
mekhanicheskikh pressov (Voronezh Heavy Mechanical Press Plant). It is intended
for the cold stamping of large parts. The press is driven by an individual
electromotor connected with the press flywheel by a V-belt transmission. The
flywheel together with the body and driving disks of the coupling rotates on th.~
shaft of a pneumatic multi-disk friction coupling. The coupling is blocked with
a multi-disk friction brake. The coupling being operated, the brake is switched
off autopatically. The press is put into operation by admitting air into the
pneumatic cylinder, whose piston presses the driving and driven disks of the
coupling together. A toothed wheel mounted on an intermediate shaft rotates the
Card 1/3
S/193/61/OW/005/004/&ri6
The K383 closed-type double-crank press ... A004/A104
right branch of the drive directly while the left branch is operated by an idler.
The slide block travels on four prismatic bedways. The lower supports of the
connecting rod are mounted on the slide block, to which also the upper part of
the die is fixed. The distance between slide block and table can regulated by an
individual flanged electromotor via two worm gears. In the extreme regulation
positions an automatic switch-off of the electromotor is provided for. Two kinds
of upper ejectors are mounted on the press, rigid and spring-mounted ones. Six
hydropneumatic cushions with pneumatic holders are mounted on the press table,
which eject the parts in the time prescribed by the operation cycle. The teolLni-
cal specifications are the following: rated press capacity - 2,500 tons; slide
block stroke - 500 mm; number of slide block strokes per minute - 8; dis-,an-~
between table and slide block in its lower position - 1,250 mm; regulation
magnitude of the distance between table and slide block - 500 mm; table
dimensions; from right to left - 7,500 mm; from front to rear - 2,000 mm;
slide block dimensions from front to rear - 1,500 mm; thickness of the die
support plate - 300 mm; aggregate clamping force of the table cuBhionz - r-00
tons; cushion stroke - 250 mm; aggregate ejection force of the table cushions -
53 tons; power of main drive electromotor at 1,460 rpm - 125 kw; power of
electromotor of the mechanism of distance regulation between table and slide
Card 2/3
s/1q3/61/0oq/oo5/0o);/006
The K383 closed-type double-crank press .. A004/A104
block.at 1,460 rpm - 14 kw; overall dimensions of the press in the plane: from
right to left - 10,340 mm, from front to rear - 3,600 mm; height of press over
ground level - 8,800; weight.(approximate) 525) tons. There is 1 figure.
Card 3/3
ra 2
'o 00
541
.W~gnlfl
RV
M-V'Mc
CIOS
ke*
0
t V -9 -.1C:1
IF, ruada4H,
cit. 0
Av
1:
2 1
r4
~v to
z v
A J9
o 0.
X
A . ".I
F.A
I d
* U R K
41
Aut=ttloa of Cold [lb-tall Gtcu-,plng ProducLion COV15580
Mro,poltrhiy, Yu. A. Clannification and Selection of the ArrangeZent
of C= 1'~~vhwdn= for Autvvitic Die-Forming 11achines
OA.ikov, H.L., awl Te. Ya. Antomovskiy. Som Proble= in tba 11--thods
of D--ciaming Cam
rieloterov, Yu, A. Y=hanizatlon antl Autozation of Stamping Operations
in Instruir4nt VzO,Unp,
Oitnik, H.A. Automation of Gt=ping Operations
Zha-:;iro, V.I. A 113dern Auta-zatic Press
Tartalzvoldy, I.?. Determination of the Basic Pazrametcrs of Vibratory
Presses for Tri=~ Op-,rations
Podrabinnik, I.M. Automtic 11achine for Fabricating Vim Products
AVA31A=1 TAbrary of Congress
2G6
229
237
244
259
264
272
5-13-61
PODRABIMK, P.A.
Toward an estimation of a special norm Onorma") for the erythrocyte
sedimentation rate. Vrach.delo n0-11:1213-1215 N '59.
(MIRA 13:4)
1. Bolluitea goroda Blektrostall, Moskovskoy oblasti.
(IMEMMYTIS)
PODRABINNIK, I.M., inzh.; RODOV, G.M., Insh.
A two-speed clatch for draw presses. Kash.Bel. no.6-8?-69 159.
(MIRA 13-6)
(Deep drawing (Metalwork))
(Clutches (machinery))
RODOV, G.14.; PODILILBIMTIK, I.M.
Automatic sheet-stamping presses with bottom drives. 34U1.
tekh.-elcon.inform. no.5:30-31 '59. (MIRA 12:8)
(b)2eet-metal work) (Power presses)
:Z
AUTHORSi Podrabinnik, 1.14., and Nenartovich, N.L., Engineers
TITLE: The Modernization of an Automatic Nail Making Islachine.
(1dodernizatsiya gvozdillnykh avtomatov)
PERIODIGALs iMashinostroitell, 1958, Dr L pp 20-23 (USS11)
ABSTRACT: The single-stroke crank machine IIA713AII producing round 3 x 80 mm
wire nails has been modernized by designers V.I. Potapov,
N.L. Nenartovich, S.Ye. Folomejev and I.I. Sak-Sakovskiy of the
Plant 118 let Oktyabrya" (" 8 Years of October") in Serpukhovo.
The article gives detailed infol-mation on design changes made
on the heading mechanism, the die-clamping mechanism and the
blank-feed mechanism of the machine. The result of the im-"ove--
ment is an increased work speed, from 400 to 600 strokes per
minute. The noise and vibration of the machine were reduced.
The authors recommend analogous modernization for other automatic
nail machines of IIA71511 Wei these of the plant "Proletars-
kiy trud", and nail machines of other plant design. There are
5 diagrams, 1 photo and 2 tables.
1. Nail mking nachine-ReikadellUg
ROWY, Grigoriy Matveyevlch;,PO4U=MllX,,,Izraill~-Hoisoyev-i-ch-;-..LOBACHU,
F.T., ihzh.. retsenzent; TOSKUS-USKIY, N.N.. inzh., red.-,UTARO--
TA, A.Y., tekhn. red.; GO~A, L.P., tekhn. red.
(Automation of stamping equipment] Avtowtizatsila shtempovoch-
nogo oborudovenlin. Moskva, Goa. nauchno-takhn. izd-vo mashino-
stroit. lit-ry. 1961. 133 P. (MMA 14:5)
(Automation) (Sheet-notal work) ..(Forging machinery)
PODRABINNIKO I.M.
The K383 double-crank closed press with 2j.500 ton eapacit7.
Biul.tekh.-ekon.inform, no.5:28-30 161. (KLRA 14 -.6)
(Power presses)
s/i8Z/6o/ooo/oo2,/oG4/612
A161/Ao2q
AUTHORs Nesvit, S.M.0 -4odov, G.M.; Podrabinnik, I.M.
T=a- Automatic Press With Floating Crosshead
PERIODICAL: Kuznechno-shtampovochnoye,proizvodstvo, 1960, No. 2, pp. 13 - 15
1
TEXT: Detailed design and operation information is given on the new "A863"
(A863) high-speed sheet-stam2ing automatic press with "floating" --rosshead, de-
signed at IKB~10) and builtIt Ryazanskiy zavod TRTTO (Rya-
zan' TKPO Plant . The press is designed mainly for blanking. The design prin-
ciple is Illustrated in Figure 1, and design and operation in Figure 2, where"f
is the electric motor driving the shaft "2" bearing a faceplate with an adjusta-
ble crank (for adjusting eccentricity), and "4" is the "floating" crosshead pBr -
forming complex reciprocative motion in vertical and horizontal direction siMA -
taneously. The comparatively simple material feed mechanism consists of two
feeding and two fixing tongs repeating the motion of the crosshead (Figure 3).
The crosshead is a light-weight casting of a high-strength aluminum alloy rein-
forced by ribs and having a cylindrical bore in the bottom to accommodated the
shank of the die and a fixing block. The fixing tongs are shown separately in
Card 1/2
S/18Z/60/000/002/004/012
Automatic Press With Floating Crosshead A161/AO29
Figure 4. Waste sheet metal is cut by shears installed on the output side ofthe
press. The nominal work pressure of the press is 25 tons; the crosshead travel
is adjustable between 5 and 75 mm; the crosshead nan make 2W, 250 and 270 runs
per min; band metal,width accommcdpted is 180 mm, and feed steps are adjustable
between 10 and 150 mm; the three-speed motor works with 7, 9 and 10 kw. The
kinematic connection is such that the feed step is always twice larger than the
crosshead travel. Lubrication is liquid, central, from a built-in pump with a
separate electric motor. The advantages of thr press are its high productivity,
simplicity of design, high accuracy of feed, accessibility and convenient set-
ting, and Its disadvantages the kinematic connection between crosshead travel
and feed step increasing the Inertia of mobile masses and impairing the stabili-
ty of the press, and considerably higher weight compared to automatic sheet
stamping presses with bottom drive. There are 4 figures.
Card 2,/2
. PODROIIINIK. I.M., inzh.; RODOV, G.H., inzh.
., machines. Maoh-361- no-5:230-235 158.
Now horizontal forgirg
(HIJU 12:n)
(Forging Rachinar)
~*-:I=h.; NNNARTOVICH, R.L.. inzb.
Ondernization of automatic nail"aking machinns. Uni0iinn."troltel
no.7:PO-23 JI #58. 04IRA 12: 10)
(Nailn-and spikes) (Machine tooln)
.RODOV, G.M.; PODRABINNIK. I.M.
Development of the manufacture of presses in the German Democratic
Republic. Biul. tekh.-ekon. inform. no. 4:88-91 161. (MIRA 14:5)
I (Germany,, East-Power presses) I
DDLI SrTY, V. , POMAMWIY, B.
Attachment for enlarging. Soy.foto 20 no.6:32 Je 160.
(MMA 13:7)
(Photography-Inlarging)
PODRALS, V. P.
Cand. Tech. Sci.
Dissertation: "Fundamentals of t-~e -ethod for invest tigating autaaatic te-lephicne
station test circuits in systems with distributed parameters."
27 Oct 49
Moscow Electrical &gineering, Inst. of Comunications
;-AQ k" lVio5lva
Sum 71
PODRAZHANSUlk, Ye.I.1 LYALIKOV, Yu.B., doktor khim.nauk, prof...
nauchnyy FR-.-; HATKOVSKAYA, N.A., red.; MMELIBAUM, X.F.,
tekhn. red.
(Polarograpby; index of litemture on polarogiaphic study
methods, 1950-1957]Poliarografiic; ukazatell literatury po
poliarograficheskim meto4am issledovaniia, 1950-1957 gg.
Kishinev, 1960. 72 p. (MRA 16:2)
1, Akademiya nauk SSSR. Moldavskiy filial, Nauchnaya bibliotaka.
(Bibliography-Polarography)
POrRASKY. E.
Universally designed industrial buildings and their standard types. p. 453.
POZM',:I STAVBY. (Ministerstvo stavebnictvi) Prahal Czechoslovakia, Vol. (1)
no. 9, (September) 1959.
Monthly liat of East European Accessions (EEAI) LC. Vol. 8, No. U,
November 1959.
uncle
PCIDRI-7KY , Y . ; k'TEt"'A, J .
1- , "L ~r:,- T.
"Significance cf Uriversa"lity- --ir, C-ur IT-d-ustrial 7. (", 7f"I-l -
Vol . 2, 1-c. 17, loe-,---enbc-.r 1954, ?-,,aYia, czec,~.)
SC: "crth-Ly List of East Euxonear, Accessiors (77A!), I-C, VC. , /-, Vo. 3,
March 1955, lincl.
PODRASZKO, J.
The diTrIng of rapeseed. p. lt9.
(PRZD-TYSL SPOZYWCZY. Vol. 11, No. ~, Apr. 1957, Warszawa., Poland.)
SO: Monthly List of East European Accessions (EI:AL) Lc. Vol. 6, No. 10, October 1957. Uncl.
YUG03LAVIA / Chemical Technology. Leather. Fur. H-35
Gelatine. Tanning Agents. Industrial
Proteins.
Abs Jour: Ref Zhur-Khimiya, No 23, 1958, 80031.
Author ; Kovac 169 Po~s~ki~.
Inst : Not given.
Title : The Production of Casein.
Orig Pub: Mljekerstvo, 1958, No 2, 43-44
Abstr--ct: The technological process is described concern-
ing the production of casein from skimmed milk
by the a8dition of whey and an initial heating
at 34-35 C., followed by heating to 420C. -
to facilitate the formation of casein grains
and finally up to 600C., to promote its solidi-
fication.
Card 1/1
119
PODRAZHANSKIY, A. S.
* The oldest (16th century) medical textbook printed in Russia (Pniversitt~- of Ushgorod)
y
(Russian text) SCIVETSK. ZDRAVCCIM. 1954, 1 (39-44)
SO: EXCERPTA MEDICA, Section IVY Vol. ?, No. 11
FCMAZHANSKIY. A.S.. doteent
I- -
ffistory of pharmacy in Lvov. Apt. d'elo 3 no.5:43-45 s-o 154.
(KIRA 7:12)
1. Is maditsinskogo fakullteta Uzbgorodskogo universitsta.
(PRARMACT,history.
Poland)