SCIENTIFIC ABSTRACT SHNEYDER, YA. - SHNEYDER, YU.I.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R001549820001-1
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: August 23, 2000
• Sequence Number: 1
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

SIME'Y'DER, V.Ye., kand. ekon. nauk, dots.; TUROVSKIY, I.G., prof.;
ZAK, N.A., kand. ekon. nauk; BOGUSLAVSKIY, A.I., inzh.-
ekon.; SAEIKISM, D.I., kand. ekon. nauk, dots.;
A&FAIISKIY, L.Yu., kand. tekhn. rauk; GUSEV, S.G., inzh.-
ekon.; GORSKOV, V.A., inzh.-ekon.[deceased]; ILIRI, S.I.,
inzh.-ekon.; BALDIN, S.A., inzh.-ekon.; NAUMOVA, L.N., kand.
ekon. nauk
[Economics, organization and planning for the building
materials industry] Ekonorrdka, organizatsiia i planirovanie
pro.V~shlennosti stroitelInykh materialov. Moskva, Stroi-
izdat, 1965. 425 P. (MIiA 18:10)

SHITEYDER) Yn~
won(ler. to-,n. Din. 6 no.10,55-57 0 161. 14-~11"
(Kal-&.,Yvl-a ri~iservoir reo.ori-City plannin.cr)

SHNEMEH, Ya.A.
Device for e-.merimental studies on tissue and organ preservation by
means of refrigeration. "'ed. prom. 15 no..0:62-6-1 Ag 161. 14:12)
1. Nauchno-issledovatellskiy institut eksperimentallnoy khirurgiches'Kay
apparatury i instrumentov.
(TISSUES-PIESERVATION) (REFPJGEUTORS)

ST-I;EIDER, TA . A
2rganizatssie s.T.-eshann-,'-kh perevozok lr-hlebnykh gruzov na
On7nnization of mixed :7rain shipments on Vol a 7.
L- 9 (Vodnvi trens-
por~, 1940, no. 12, p. 1-3). DLU: HE56l.R8
SO: Soviet Transportation and Commur-icnti-)ns, A Bibliography, Library
of Congress, Reference -Pepartment, 'Alesh"naton, 1952, '--nelass-ified.

SHN3YDXR, Ya.A., inzhener-ekonomist Eauthor]; TARUTIN, P.P., laureat Stalinskoy
jTr~i_mI-i_,'_k&ndid&t tekhnicheskikh nauk Eredaktorl.
[Hauling bulk flour by track] Opyt organizataii bestaraykh perevosok maki
avtotransportom. Pbd red. P.P.Tarutina. Moskva, Gos.izd-vo tekhn.i ekon.
lit-ry po voprosam sagotovok, 1952. 57 P. (MIJU 6:8)
(Flour-Transportation)

SHNMER, Ya., inzhener.
Method of calculating the heat in the processes of covering fish with ice.
Khol.tekh. 30 no.2:57-61 Ap-Je 153. (MT-HA 6:7)
(Refrigeration and refrigerating machinery)

SHRUM, Ya., inzhener.
Transportation of flour in bulk. Muk.-olev.prom. 20 no-3:15-18
Mr 154. (MLRA 7:7)
1. Gosudarstvennyy institut Promsernoproyekt-
(Flour--Transportation)

SMIMER, Ya., inzhener;
Taking in grain soon to be received from the neif lands of Altai
Territory. *ak-elev.prom. 20 no.6:3-4 Je '54. OUBA 7:811
1. Goaudarstvenny7 institut Promzernoproyekt.
(Altai Territory--Grain--Storage) (Grain--Storage--Altai
Territory)

BRMT' P.P.' otvetstven:nyy red.; KOGAIT. A.O.. red.; KIJZIJETSOV. S.M., kand.
9
tokhn.nauk, red.; KULAKQVSKIY, A.B., inzh.. red.; KUROCHKIN, A.M.,
red.; PISAK, B.Ya., rod.; TROITSKIY, II.A., red.; SHIIEYDEIR Y&.A.,
red.; KWHETKOV, L.I., red., GOLUBKOVA, L.A., tekha.red.
[Designing grain warehouses and grain-processing plants]
Prooktirovanie zernokhranilisach i predprilatii po pererabotke
zerna; abornik statei kollektiva sotrudnikov instituta. Moskva,
Izd-vo takhn.i okon. lit-ry po voprosam mukomollno-krupianoi,
kombikormovoi promyshl. i elevatorno-skladskogo khoziaistva,
Vol..l. 1957, 59 P. (MIRA 11:5)
1. Gosudarstvennyy institUt Dromzernoproyekt.
(Granaries) (Flour mills)

SHNEYDER, Ye.A.; ZUBKUS, B.P.
Stratigraphy of Lawer and Riddle Devonian sediments in the North
Minusinsk Lowlan-d and Syda-Yerba Depression. Mat.,po geol. i polAskop.
Kras.kraia no.3:41-56 162. WIRA 17:2)
- - -- I...
- - -~~ ---z
. -z..--' - , ~ - - _: ~ i ~ -~ - .~. - ~ "I t~~ 'I-

ar: v- -r,
7-28 'f4.

DUVANOV, Pavel Antonovich; SOKOLOV, Yu.B., inzhener, redaktor; SHEMER.
Ye.B.. reclaktor; LYUDKOVSKAYA, N.I., tekhnicheskiy redakt*-~~~
[For high brick production from ring kilns] Za vysokie 30emy kir-
picha s kolitsevykh pechei. Pod red. IU.B.Sokolova. Moskva, Gos.
izd-vo lit-ry po stroitellnym materialam, 1954. 62 P. (KIRA 8:7)
(Brickmaking) (Kilns)

BEZBORODOV, M.A.; qHNNAKAL, V.L., nauchnyy rodaktor; SHHEYDER, Ya.B.
redaktor; PANOVA, L.Ya.,tekhnicheskiy redaktor
CH.V.Lomonosov, founder of scientific glassmaking] H.V.Lomonosov -
oBnovopolozhnik nauchnogo steklodelila. Moskva, Gos. izd-vo lit-ry
po stroit. materialam, 1956. 113 p. (EM 10:4)
(Glass manufacture) (Lomonosov, Mikhail Vasillevich, 1711-1765)

GUREVICH, Ileum LIvovich; SMIFYDM, Ye.B., red.; PYATAKOVA, N.D., tekhn.red.
-
[Our experience in the automatization of cement production]
flash opyt avtometizatsii tsementnogo proizvotstva. Mosl-va, Gos.
izd-vo lit-ry po stroit. materialam, 1957. 53 P. (MIRA 11:3)
(Cement industries) (Automatic control)

GEI~IOWA, M.M., red.; YEWRYCHEV, A.M., red.Cdeceased]; KOLERKOV. V.A.,
red.; LEVMAII, B.S., red.; LOGINOV, Z.I., red.; I/AYKOV, N.K., red.;
SMIRNJV, L.I., red.; ERLANDETS, Y.Y.,red.;--5XXTRER, Te.B., r6d.
izd-va; TEMKINA, Ye.L., tekbn.red.
[Proceedings of the section on building materials] Saktsiia
stroitollnykh materialov. Moskva, Goa. izd-vo lit-ry po stroit..
arkbit. i stroit. witerialam, 1958. 386 p. (MIR& 1~:1)
1. Vsesoyuznoye soveshebanlys po stroitel'stv-u. Moscow, 1958.
2. Glavnyy ekspert Otdola stroitellnykh materialov i lesnoy
prortyshlonnosti Goastroya SSSR (for Maykov).
(Building materiAls)

KOVALEVSKIY, Pavel Ippolitovich, i-nzh.; PITSKELI, Lev 'Naumovich.
kand, tekhn.nauk; KISELEV, Petr Mikhaylavich, rpl. nalicim.
sotr,, inzh.; S.E=Dam?, Ye.B., red.
[Vibrocompaction of brick blocks for industrial installations;
practices of the laboratory for winter operations of the Sci-
ent-ific aesearch Institute of Organization, Mechanization,
and Technical Aid for Constructi=, Section of Large-Blcck
Construction of the Scientific Resears-h Institute for Constr-ac-
tion and of the "Teplomontazh" Trust] Vibrouplotnenie kirpich-
rrykh blokov dlia promyshlennykh sooruzheni-i; iz opyta labora-
torii zirnikh rabot 1.II014TP, sektora krupnoblochnykh
tsii NII pc stroitel'stvu i tresta "Teplomontazh." Moskva,
Gcsstroiizdat, 1963. 4-9 p. (I-IIIU 17-.6)
1. Akaden-iya stroitellstva i arkhiltektury SSSR. Nauchno-
issledovatel'skiy institut organizatsii, mekhanizatsii i
tekhnicheskoy pou.oshchi stroitelist-N-u. 2. Laboratoriya zim-
nikh rabot Nauchno-issledovatellskogir) instituta organizatsi-l-,
mekhanizatsii i tekhricheskoy pomoshchi stroitel'stvu Lkademii
stroitel'stva i arkh,-tektury SSSR (for Kovalevskiy). 32. Ruko-
voditell sektora krupnoblOchnykh kanBtm6cigdy Nauchnc-issled-,
vatel'skogo institu'a pa stroitel5st
i arkh-itekt-ary SSSR (foi- 114-tskeli). 4. Sektor krupnoblochg7kh
konstruktsiy Eauchro-issledova-tel's-kogo instituta po stroltei--
st-m Akade-di streite-lTs'.va i arkllitektury SSSF (for K-4selev).

GURVICH, Ruvini I-likhaylovich, kand. tekhn.nauk, dots.; SBEYDER,
Ye.B... red.
[NI,anufacturing large sand-lime concrete products; a
lecture with slides] Proizvodstva krupnorazmernykh sili-
katobetonnykh izdelii~ lektsiia s diafillmom. Moskva,
Gosstroiizdat, 1963. 12 p. WIRA 17:9)
1. Moscow. TSentrallnyy nauchno-iss-iedovateltskiy institut
organizatsii, n;ekhanizatsii i tekhnicheskoy pomoshchi
stroitellstvu.

SfUk,YUEAY le.G. (L'vov, ul.Engellsa, d.25, kv.4)
Practical value of studies in punctate cy-tology in the diagnosis of
cancer of the mammary gland. Nov. khir. arkh. no./+:89- Jl-Ag 160.
7ILRA 15:2)
1. Patologogistologicheskaya laboratoriya Llvovskogo oblonIkodispansera,
Nauchnyy rukovoditell raboty - zasluzhennyy deyatel nauki, prof.
M.K.Dall. (PUNGML-~b (~L4UWiY GLOD-CM CER)
.(DIAGNOSIS, CYTOLOG16)

~i~' Eli I C' H, , bavi j Y'~-fj il * h., in:~r Ar 'I ati :y xen- lyev! Al,
V~j
-'zlze~,,fra7 =4 ---rev, for zrie c.lnstmv-
tirn of :-cmple-ely prefabricated api-rtm-en-.. h~,Jses~ Vcscow
B-u-; I-d
-L.g ~rusr, llc-'S cf ~-ha Vai-n A-3ministraL41m
4a brigada l.V,Diulzareva
na stro e sl - te po Ir ,-) s'-,- -1 --,vk ri zrdl vk n dom.-- vtrest
Aka,~em--ya stro,-e:--'tA,a 1 arkhitekT.~-ry SSSR,, Nauchno-
--ledovatel ~ 31 or -~:u! i za s i mek'-an4 zats4
e ,,e S koy p on, 2. lia--I~al'nik *ekh-
Ll
F.17he~-k~~'r:. orr,-'Ia tr-,"sta Ilelo,-gorgstroy" (fr)r Gliceirich).
3, kLiskogn gosudars-~veniicg.) strulte-31no-
n c; ia z h n reo ~ a n,), Glqvnr,g -.de.-Lemya po zhi ii -=h~-,h-
n., vi : grazhdaas-~:--~a: Z-t 7'1~ I I t: S-rj -de 'loskvi-

AID P 3646
Subject USSR/Medicine
Card 1/1 Pub. 37 - lo/18
Author Shneyder, Ye. I.
Title Some problems of industrial hygiene during the processing
of staple fibers
Periodical Gig. i. san., lo, 41-43, 0 1955
Abstract Air pollution by carbon bisulfide in Moscow textile
factories, where colored staple fibers are processed,
is discussed. Investigations of sanitary conditions
are described, and recommendations for the improvement of
these conditions are made. 3 tables.
Institution : Moscow Medical and Epidemiological Station
Submitted : Mr 5, 1955

SMPNDBR, Ye. 1.
"Sovetskaia meditsina", a survey of numbers for 1957. Gig. i san. 24
no.4:87-90 159. (14I-RA 12:7)
(.qKDIGIN3--PFMIODIQA1S)

SHMYDER, Ye. V.
Larvicidal properties of certain phosphorus organic insecticides.
Zhur.mikrobiol.epid. i immun. 28 no.9:86-91 S '57. (MIRA 10:12)
1. Iz TSentrallnogo nauchno-iss ledova tell akogo dezinfektsionnogo
instituta.
(INSECTICIDES, effects,
phosphate organic cpds., larvicidal eff. (Rus))
(PHOSPHATES, effects,
insecticide organic spds., larvacidal action (Rus))

SHTEYDO, Yu., starshiy nauchnyy soturudnik
Evaluating the resistance of individual potato varieties.
z1ashch. rast. ct, vred. i bol. 10 no.12:22-23 165.
(1,111PA 19: 1)
1. ilauchno-issledovatellskiy institut kartofellnogo khozyaystva.

SHNEYDF.R,Yii.G., kandidat tekhnicheskM nauk
FIffect of surface microgeometry- on the operational properties of
instrument parts. [1zd.] LONITOKASH no.34:106-116 '54.
(MIRA 8:10)
1. Leningradskiy Institut avintsionnogo priborostroynniya
(Surfaces (Technology))

YEFREMOV,I.P., kandidat tekhnicheskikh nauk; SHNEYDER,Yu.G., kandidat
tekhnicheskikh nauk
Investigation of the machining of stainless steel used in tool
manufacture. [Izd.] LONITOMASH no-34:167-177 154.
(MIRA 8:10)
1. Leningradskiy institut aviatsionnogo priborostroyeniya.
(Surfaces (Technology))

USSSR/ Ln,,~In~,rxinL; Zpr:clal tools
(' Jard 1/1 rub. 103 - 11/25
Authors -hn(!ydcr, Yu. G.
Title The desIL;n of a surface-compressInC and hardening tuol Inecrporating
a sprinE-nctuatcd roller
PeriodIC&j 1 Stan.i. instr. 1. 2,27-28, Jan 1955
Abstraot I A description it. presented of a tool havinC, a roller mounted )n
s pin 'winich in, octuai.ed by a sprIng carried In a bolder. The
tool in pressed aea-inst the ciraular work in tile luthe., to compross
mid harden fhe surface of mr-tal -pecimens. thereby Increasinj- tile
microhardnebe of the work by 20-403. Table, drawine.
Institution
Submi t~ t ~ d

SOV/ 137-57-10-19 194
Trans I a ti on f rom. It eferativnyy zhurna I, i'vietallurgiya, 1957, Nr 10, p 107 (USSR)
AUTUIOR- Shneyder, Yu.G.
TIT LE Cold Pressworking of Metals (Kholodnaya obrabotka metallov
davleniyem)
PERIODICAL: V sb.: Progressivn. tekhnol. v mekhanosborochn. proiz-ve.
Leningrad, Lenizdat, 1956, pp 176-198
ABSTRACT: Knurling (K) as a machining process is characterized by
higher labor productivity than butting. K yields surface finish
in the VVV8-;~~VV10 -quality range. Deformation of the metal
strengthens its surface layer. In the absence of special equip-
ment, K may be performed on cutting machine tools. A de-
s( ription is presented of the K of embossed symbols an steel
printing disks iri~;tead of hand engraving. The time required to
make the disk is reduced from 5-8 shifts to 1-3 min, The de-
sign of a fixture (F) that may be mounted on a lathe for plane-
tary thread rolling is presented. The F permits the rolling of
thread of less than 3-mm diameter and it may substitute, in
small-lot manufacture, for the inefficient system of thread-
Card 1/2 ~:utting by tap. The stamping of flat and cylindrical parts by K

SOV/ 137- 57-10-19194
Cold Pressworkincy of Metals
0
with the aid of the F on milling machines and lathes considerably increases
the production rate and quality of application of markings as compared to
the hand method, and the consumption of expensive marking irons is th 'us
reduced. The designs of knurling F for the finishing and hardening of sur-
faces are presented. The sizing of spherical surfaces is examined. The
materials used, the heat treatment of the knurling rollers, and K proce-
dures, are indicated.
V. 0.
Card 2/2

AID P - 4289
Subject USSR/Engineering
Card 1/1 Pub. 128 - 14/25
Author Shneyder, Yu G Kand-Tech. Sci., Dotsent
Title Surface Strengthening of machine parts with a spring
ball.
Periodical : Vest. mash., #2, p. 48-52, F 1956
Abstract : A resilient spring ball as a tool for strengthening and
smoothing machine part surfaces is described. Various
designs of such spring ball tools are shown. The tool
is attached to a turning lathe so that the strengthening
and smoothing increases with the increase of the tool's
pressure on the surface and with the decrease in the
tool's rotating speed. Diagrams, photo, charts.
Institution : None
Submitted : No date

SMYDER, Yu.G.
Cold roll forming. Priborostroe4e no.5:17-20 Ky '56. (MLRL 9:8)
(Rolling (Metalwork))

_~': , N 2 - ~ , -1 , - I . .-
" I ., ~- P 1 11 ; ,, ~:" - ! ,
SHNETDER, Yu.G.
Small-size ball rolling machines. Priborostroenie no.10:27-28
0 157. (MIRA 10:11)
(Rolling (Metalwork))

25(l) PHASE I BOOK EXPLOITATION SOV/3273
Shneyder, Yurly Gr-~_,gorlyevlch, Candidate of Technical Sciences
Chistovaya obrabotka metallov plasticheskim deformirovaniyem;
obzor (Finishing of Metals By Plastic Deformation; a review),
Leningrad, Leningr. dom nauchno-tekhn. propagandy, 1958.
76 p. 6,200 copies printed.
Sponsoring Agency: Obshchestvo po rasprostraneniyu politicheskikh
i nauchnykh znaniy RSFSR. Leningradskfy dom naUchno-tekhni-
cheskoy propagandy'.
Ed.: D.B. Vakser, Docent.
.PURPOSE,-. This book.is,intended for metallurgists, particularly
those concerned with aetal-finishing processes.
COVERAGE. The book surveys the most widely used methods.'of burn-
ishing plane and cylindrically curved metal surfaces. Only
the rxewer methods., as practiced both in the Soviet Union and
Card 1/3

Finishing of' Met,,i.1.9 (Cont. SOV/3273
elsewhere, are described In detall. ReGults of recent inveati-
gation3 In this field are given. There are 16 references, of
which 12 are Soviet and 4 are German.
TABLE OF CONTENTS:
Introduction
3
Ch. I. Finishing of External Cylindrical Surfaces 5
1. Burnish rolling 5
2. External burnishing with roller burnishers 23
3. External burnishing with ball burnishers 35
Ch. II. Finishing of Internal Cylindrical Surfaces. 50
4. Sizing of precise small-diameter holes with single-
button burnishers 50
5. Sizing of deep holes with composite burnishers 55
6. Internal burnishing with roller burnishers 57
7. Internal burnishing with ball burnishers 6o
Card 2/3

Finishing of Meta
Ch. III. Finishing
Bibliography
AVAILABLE: Library
Card 3/3
'Oon,~-, SOV/3273
of Flat Surfaces. Ball and Roller Burnishing 7.2
78
of Congre5s(TS 653 S45)
VK/jb
4-4-60

S~UIEYDPT G' . (,Candl Irecl I. IGWI -I Qiu~'*
V 11-LN1 tMA Lill*
and. Tech. Scl.): GRIGGRI)TV, B. V. ( and. Tech. Sci.);
C
FELI? -e. 1. (C- - -
xi'li. "Fxaim;Ples of -Mecb--iization and Automation of InstrLm--ent-rarts manufacturing
'.;processes Automa~ion and liiechanizat~on of Production Processes in instILL-ent
U
I MashCiz,
Manufactixrin,gr, Moscow,, 1958- 591 P-
PURPOSE: This book. is intended for engineers, technicians, and scientific per-
corinel concerned -with mechanization and autormation of production processes in
Instrument malufacturing, and for students and teachers of this Subject in vuzes.

AUTHOR: Shneyder, Yu.G. 121-4-12/32
TITIE: Finish Idlachinin_- of Cornnponents by the Plastic Deformation of
Their Surface (6histovaya obrabotka detaley plasticheskim
deformirovaniyeiii poverkl7-,nosti)
PERIODICAL: Stanki i Instrument, 19,18, No.4, pp. 25 - 26 ~U66X)
ABSTRACT- A -tool is described for burnishing a hydraulic ram
cylinder (50 mm. bore, 'jL~O nUn length) by means of two diamet-
rically opposite balls of 11 mr. diameter. The balls are carried
on ball bearinr-s in hinged levers pressed out-wardly by a coiled
C. tD
spring between the t-j.,o levers. The machined material is 0.451/6
carbon steeli the rollir,)- speed, 80 m/min; the feed, 0.22 MM/revi
the pres_:-ure on the ball, 30 kg. Machine oil lubrication is
C)
used. After 12 minutes, a surface finish of the 9th grade is
achieved. The external burnishing of a fashioned handle on a
copying lathe is illustrated. German tests with the ball
burnishin.6 of cast _Jron slideways in machine tools are briefly
sum., arised.
There are 3 figures and 1 table.
AvAILABLE: Library of ConEress
Card 1/1 1. Burnishing tool-Design 2. Burnishing tool-Operation

SHNEYDRdi, Yu.G., kand. tekhn. nauk.
11 1.10,0 ~sin~g ball rolling in finishing precision holes. Vest. rAsh. 38
-55-56 Mr 158. (MIRA 11-2)
n
o.3:
(Rolling (Metalwork))

MISHIN, Ivan Alekseyevich; SEHOOT, S.P., kand.tekhn.nauk, retsenzent;
SO:-;YDERs..Tu.G., kand.takhn.nauk, red.; SHATILOV, Y.A., inzh.,
rea-.,-- '
____ DUDUSOVA, G.A.. red.izd-va; FRUMKIN, P.S.. tekhn.red.
[Wear resistance of tractor engine parts] IznoBOBtoikost' detalei
avtotraktornykh dvigatelei. Moskva, Gos.nauchno-tekhn.izd-vo
mashinostroit.lit-ryt 1960. 137 P. (MIRA 13:3)
(Tractors--Engines)

PHASE i'-Z"AA &W'WiTATTON SOV/3933
Shneyder, Yuriy Grigortyevich., Candidate of TechrIcal Sciences
Kholodnaya besshtampoveya, obrabotka tochnjkh detAley davleniyem (Cold
Presavorking of Precision Parts Withowt Die Sets) 2d ed., rev. and enl.
Moscow, Masbgiz,, 1960. 309 P. 7,000 copies printed.
Reviewer: Ye. N. Nikitin, Engineer; Ed.: D. B. VakBer, Docent; Ed. of
Publishing House: A. I. Varkovetskaya; Tech. Ed.: P. S. Frumkin;
Managing Ed. for Literature on Machine-Building Technology (Leningrad
Division, Mashgiz): Ye. P. Naumov,, Engineer.
PURPOSE: This book is intended for designers and process engineers at
machine and instrument plants. It may be also useful to students of
tekhnikums and schools of higher education. .
COVERAGE: The book deals with several methods of accurate pressvorking of
machine and instrument parts without the sets. The essentials., equipment
and tools used, engineering and economic indices, and the field of
application of each method are presented. A classification of methods
of cold presavorkiag without the sets used in the Soviet machine and
instrument industries is also presented. No personalities are mentioned.
There are 93 references; 79 Soviet, 7 German., 4 English,, and 3 Czech.
Card 113

Cold Pressworking (Cont.)
TABLE OF COMXNTS:
SOV13933
Preface 3
Ch. I. Essentials and Characteristic Features of Cold Pressworking of
Vp-tals; Without Die Sets 5
1. Cold plastic deformation- of metals 5
2. Effect of cold pressworking on the operational properties of metal 11
3- Classification of methods of cold presavorking of metals withoirt
the sets 22
Ch. 11. Forming 34
4. Rolling of metal sheet.., band, and shapes betveen rolls 34
5. Rolling thin [narrow] band betveen balls 45
6. Drawing shapes vith solid., compQsite, and roller-type dies 50
7. Rotary svaging of c~rlindrical and shaped parts 68
8. Reduction of tubular parts with [rotarjr] dies, rollers, and balls 82
9. Forming hollow parts on spinning lathes 86
10. Thread rolling with cylindrical or flat dies with half-ring-and-
rollex- and with thread-rolling heads 93
Card 2/3

Cold Presavorking (Coat.) S017/3933
11. Rolling splines and serrations 134
12. Rolling of small-modale gears 144
13. Working shaped parts by rollin betveen rollers and. flat dies 158
14. Xhurling Of signs 16T
Ch. M. Sizing 1T8
15. Burnishing of shaft-and axle-type parts betveen rollers 178
16. Piercing and broaching holes vith burnishln~ punches and broadbes 196
17. Burnishing of holes vith inserted-blade., rollers and ban
burnishers 222
3.8. Roller burnishing of gear threads and teeth 234
19. Ball burnishing of spherical surfaces 238
Ch. IV. Finishing and Work Hardening 241
20. Roller burniphin of oirter surfaces 242
21. Ball burnishing of outer surfaces 268
22. Roller and ball burnishing of holes 289
23. Work hardening by shot peenin , ball bUrniFthin and b 298
Bibliography 307
AVAILABIX: Library of Congress vx/pw/-ec
Card 3/3 8-25-6o

GATRILOT, A.N., prof., doktor tekhn.nauk; DEMIYANYUK, F.S., prof., doktor
tekhn.aauk; MITROFANOY, S.F., kand.tekhn.nauk: KORSAKOV, V.S.,
prof., doktor tekhn.nauk; IVANOV, D.P., doktor tekhn.nauk; STO-
ROZHHV, M.V., kand.takhn.nauk; MALOV, A.B., kand.tekhn.nauk;
KUDRYAW07, I.V., prof., doktor tekhn.nauk;-
kand.tekhn.nauk; OV, Tu.V., dotsent; KAZAKOV, N.Y., kand.
tekhn.nauk; ZOLOTYKH, B.N., kand.tekhn.nauk; ROZENBERG. L.D.,
prof., doktor tekhn.nev , ISITHIMOVICH, D.Ya., inzh.; NIKOLAYEV,
G.A., prof., doktor tekha.nauk; VLADZIUVSKIT, A.P., doktor tekha.
nauk; SHAUMYAN, G.A., prof., doktor takhn.nauk; KOSHKIN, L.N.,
kand.tekhn.nauk; BOBROV, V.P.0 kand.takha.nauk; HOVIKOV, M.P.,
kand.tekhn.nauk; VIKHMAN, V.S., kand.tekhn.nauk; TWIR ISHER, A.V.,
kand.tekhn.nauk; KLIMERKO, K.I., prof., doktor ekonom.nauk;
VYATKIN, A.Ye., inzh,; SATELI, E.A.9 prof.. doktor tekhn.nauk;
FOFANOV, I.G., inzh.; MATVEYENKO, V.V., inzh.; KOCHETOVA, G.F.,
inzh., red.izd-va; HLIKIND. V.D., tekhn.red.; TIKHA OV,.A.Ya.,
tekhn.red.
[Present status and trends of future development of technological
processes in the manufacture of machinery and instruments] Sovre-
mennoe sostoianie i napravleniia razvitiia tekhnologii mashino-
stroeniia i priborostroaniia. Moskva, Gos.nauchno-tekhn.izd-vo
mashinostroit.lit-ry, 1960. 563 P. (MIRA 13:7)
(Kachinery industry--Technological innovations)
(Instrument manufacture--Technological innovations) (Automation)

PHASZ I BOOK ZIMITA-M% SOV/4118
I p~lbcr"tfty~--.- (F~ ... St. If th. ?r ....... L. -.n. ~1-
ohint ~=d lutr~-* ll.dusri-i -1 f,r
1%0. 563 ;. 5,000 C.pl.. pri.td.
Ed.t Anat.1!4 %U=lVW-h Doctor I.' T.Ihnic.l &:l.nvta, P,f...
yawgiftc Fd. for = YAC.4-4,10 Building and :nl..r=emt C-dtr~tl
I.T. ftk.~.kl Egj- rl Ld. ~f P~bll.h--;; I.F. K-
Egtn-~; fth. U.., V.D. Wkizd -d LT..
b-- k !.t..dd for toohnl-~l -1 --,l Li th.
.d 1.d,otri.s mi I.. mtl~!,.L. -d t ... h.,s of oh..10 1,
CQTE=E t
~~: bok deali wlth th-rj ~nd ;mzti-a 1- tr.* -.1-turtr.9
pmI. f tn. -d
Aloal-m!o and 1t"I .-I
1. ti-m t I- In; "2tiI
-W~q, ,! ", -1.1- rr
.."j: P.
Th. boak ;-S-ted t h.
~,nf.,r- 'Ad,-.d -nd intr--nt Yl I
-I'd
tr-=g P~ h.ld 1, .95,q. 7h. plp,~ b,,, in th
. --_ 4z ttq Jold. A c~A; qr 1 !-T t"d Ith, a'
of
.rA of tn. jn,&_,.,y. 5,
PZnz ~ of I~pt.r~.
AMX CY C=7ES-51
lntr~lwtjca (&.1. CArrilcr, Dvtor of 7*ehnlml Pmf.-cr)
n=lla M rAATICI IN X--;t7AC:l;lQN'
T -a VACHVE AIND
Ch. 1. -he 11 of or X. ~f..t,rtn;
B.iLu
:zgc (F.3. D".Ir.trlk, DII
P~bl 9 =ootd ith th~ ~3

Present State (Cant.)
SOV/4718
3. Machining errors caused by deformations of the working system under
the action of cutting forces 83
Ch. IV. The [Present] State of Founding, and Prospective Problems [D.P.
Ivanov, Doctor of Technical Sciences] 98
Ch. V. The Present State and Problems of Die-Forging Processes [M.V.
Storozhev, Candidate of Technical Sciences] 107
1. Heating process 107
2. Forging process 109
3. Hot die-forming process 114
Ch. VI. The Present State of Cold Stamping in the Machine and Instrument
Industries and Basic Development Trends [A.N. Malov, Candidate of
Technical Sciences] 128
1. Features of the [present] state of cold stamping 18
2. Basic trends for the development of cold stamping 130
3. Mechanization and automation of cold-stamping processes 1.40
Ch. VII. Surface Cold-Plastic Working of Metals [I.V. Kudryavtsev, Doctor
of Technical Sciences, Professor, Yu.G. Shneyder, Candidate of Tech-
nical'Sciences, and Yu.V. Shukhov, Do~en_Tl 163
Card 4/11

Present State (Cont.)
SOV/4718
1. General information 163
2. Physical bases of processes of the surface cold~pressworking of
metals 164
3. Methods of surface pressworking 167
4. Technical-economic possibilities and effectiveness of surface press-
working 177
5. The practice of employing surface pressworkingin the machine and in-
strument industries 186
Ch. VIII. Present State and Problems in the Field of Metal Cutting
[N.F. Kazakov, Candidate of Technical Sciences] 197
1. Present cutting-tool materials and their cutting properties 198
2. The use of ceramic tools 203
3. Physical bases of cutting-tool wear in machining a heat-resistant
alloy 206
4. Selection of some rational parameters of the cutting portion of tools 221
5. Improvement of cutting-tool operating conditions 225
6. Quick method for determination of tool wear 228
7. Some problems in the use of lubricating coolants in metal-machining by
0utting 232
Card 5/11

85365
S/046/60/006/004/015/022
t/,,p ~'Ad 3 10 16 1- B019/BO56
AUTHORS: Bykov, N. S., ~jhnqy
TITLE- An Experimental Investigation of the Action of Surface
Quality Upon the Damping of Surface Waves
PERIODICALi Akusticheskiy zhurnal, 1960, Vol. 6, No. 4, PP- 501 - 503
TEXT: The authors deal with results obtained by an experimental
investigation of the effect of the surface quality of a sound conductor and
of the working method upon the damping of surface waves. The investigations
were carried out on rectangular specimens having a cross section of
40-20 mm and a length of 450 mm. Treatment was carried out by shaping,
milling, polishing with abrasive powders and pastes and by means of
chemical polishing. Measurements were carried out by the pulsed method. It
was found that the manner of treatment has a considerable effect upon sound
damping in the sound conductor. The strongest damping coefficient was found
in the case of a surface treated by a shaper. In the case of milled sur-
faces, the machine construction becomes noticeable with the damping
coefficient. Also the direction of the treatment with respect to the sound
Card 1/2

86 36 5
An Experimental Investigation of the Action S/046/60/006/004/015/022
of Surface Quality Upon the Damping of Surface B019/BO56
Waves
ray becomes considerably noticeable. If the direction of treatment is
perpendicular to the sound ray, the damping coefficient is greater by
15 - 20%. In chemical polishing, an influence is found to be exerted by
the layer being formed on the surface of the specimen as well as by the
method of polishing. There are 2 tables and 3 Soviet references.
ASSOCIATION: Leningradskiy institut aviatsionnogo priborostroyeniya
(Leningrad Institute of Aviation Instrument Construction)
SUBMITTED: February 15, 1960
Card 2/2

5 Z// I ~!
A 161 /A 130
A:J -0 :3 Y'.
d V , S E i
n. o' 1. - ~,n 1,~- -TI al
r :-'& r-,rS'--- -fenly
PERH AL,, -a ,-3. 1-..
r-it ng nd b -g
1 - Tr E-
ard
a 5T-
aT'; " ! -
AMrikNlil
,r~ ar ~ a
0 f
IN
Ti
Al
1 0,

2511,10 ~ , -, .- ".., ' )- '% , , 1C' *-
:if 0 -:Z tj

8K'I ~1~7.5)
rad. bt-n di-m-
V,~

k 19
f
s
ma a - - _
'
y ar'j
flr-sil
7~
-77- wl 7 5
L
: angle,
J an

Mir. ;.7r ana
p
-z sr: 17- iz: L". a ir- r-`~ - -d
r
h
-
-'d
a- lq~=6' li f
Pro-
i -n vw i 13, f7ifn C, ~ I
a na
p~r 1 -2 - -2Laz--~~S 'kaf-,er T,4rning) Higher ball
3
pie'-S-z~jr~- wa-z ni-a~--4 `~,r -.r-,n ~cr and a lumil nt-m
-
Wcrldaarden~
d su

f a c .
-
r
xg ~
nm E c a t b
d n-j--
-e taLl
:uii d'
a

~r
deep -
-
-
e,
ome
- of' b ni~hlra
ur. -

ar e 0 1 -
ar~ f I iz .IT S anJ 4 i-f. e r Sc,,r'=* bloc and- 2 nxr-SovIE-r-
b I '7--.-~ H r;,,' a S z
read az fol-cmc- "Me~ai-
r 1~ d~~c l C;n"
n:'
i "Ma~ 1 1956

lard .
.

SHNEYDEa, Yu.G.~ kand. tekhn. nauk, red.; FREGERp D.P.9 red. izd-vaj BELOGU-
9 tekbn. red.
[Refining and strengthening of metals by pressure] Chistovaia obra-
botka i uprochnenie metallov davleniem; bibliograficheskii ukazatell.
Leningrad$ 1961. 29 p. (MIRA 14:7)
(Metals--Cold working)

SOKOLOV, Sergey Pavlovich; SIMMER, Yu.G., kand. ftkbn. nauk, retsenzen-t;
KUDASOV I, G.F., k~Kd',--takhn-.--naukf-red..3 GLYASS, V.D., inzh..,red.;
BORODULINA, !.A., red. izd.-va; NIKOLAYEVA, I.D., tekhn. red.
(Fine grinding and lappin-I Tonkoe shlifovanie i dovodka. Pod ob-
0
shchei red. G.F.Kudasova. Moskva, Gos. nauchno-tekhn. izd-vo mashi-
nostroit. lit-ry, 1961. 85 P. (Bibliotachka shlifovshchika, no.9)
(Grinding and polishing) WIRA u.10)

4HII.-L;YDER, Yu.G., kari.tekhn.nauk
I
Press finishing of Wts. lashinostroitell no.lC:32-34 0 161.
M
(MIRA 14: 5")
(1-letals--Finishirg)

S/122/'61/000/012/004/008
D221/D303
AUTHOR: Shney~~r,_jqs_G., Candidate of Technical Sciences,
bo-cent
TITLE: Finish machining by pressure
PERIODICAL: Vestnik mashinostroyeniya, no. 12, 1961, 43 - 50
TEXT: The accumulated industrial experience and the results of ex-
periments permit the main principles for selecting the arrange-
ment, 1"ool and operating conditions to be forrulated, The purpose
of the machining (sizing, finishing or work hardening), dimensions,
design and rigidity of the workpiece, the magnitude of production
and variety of components determine the above. Roller or ball bur-
nishers with rigid, flexible or impact action are used at present.
The main feature of burnishers is the resilient contact of the de-
forming element with the machined surfaced The illustrated designs
are reliable and long lasting, without the need for precise align-
ment of the relative position between the work-piece and the tool.
The amount of burnishing is easily controlled, and uniform finish,
Card 1/4

S/122/61/000/012/004/008
Finish r-,achining by pressure D221/D303
Azovskiy zavod kuznechno-pressovogo oborudovaniya (Azov Factory of
Forging and Pressing Equipment). The inertia two-ball burnisher is
used for finishing cylinder blocks in autoi7obile repair shops in-
stead of honing heads. The pressure of balls is varied by speed
changes. The rigid ball burnishers are developed by the Fiz:Lko-
tekhnicheskiy institut All BSSR (Physical and Technical Institute
of the AS BSSR) for finishing hydraulic cylinders. The tools with
taper rollers operating on the principle of self-drive were desig-
ned by the factory "Krasnyy ekskavatuor" of Kiyev and by NIITrak-
torsel,'khozmash. Aal illustration is given of a hydraulic machine
with three cylindrical rollers, one of which may be tilted at an
angle, and thus an axial component is formed. The NIITraktorsell-
khozmash has developed a unit on these lines with taper rollers
which impose the drive instead of the ~.,iorkpiece. Larger diameter
multi-ball heads are designed by the above-named Institute for
burnishing slideways of machine tools, A single ball too! is used
for burnishing aluminum alloy to obtain high optical qualities.
There is a non-linear relationsh-iD between 'Uhe parameters of bur-
nishing (pressure and feed) and its main index of surface finish.
CL,-rd 3/4

S/122/61/000/012/004/008
Finish machining by pressure D221/D303
The optimum conditions of machining by plastic deformation is the
main factor for- its effective application, The practice and inves.-
tigations indicate that pressure should be minimum, and whenever
possible a flexible tool should be used. Experimenial determination
of optimum pressure is obtained by a pass with low force, where
traces of preceding operations still remain, Then the pressure is
increased until the required finish is achieved. The feed has a
secondary importance. There are 14 figures, 1 iable and 8 Soviet-
bloc references.
Card 4/4

~'UTHG*:~S:
TITLE:
':~ERIGDICAL:
S/046/62/008/002/015/016
B100108
Bykov, X. S.,
The effect of rollin- of sound conductor surfaces on the
0
damping of surface waves
Akusticheskiy zhurnal, v. 8, no. 2, 1962, 240-241
',-':'XT: RectanEular sound conductors (300-40-20 mm) of C-T. 45 (45 steel)
were rolled smooth by means of a ball. The load on the ball was varied
between 15 and 19 kg. The surface finish of the end product was V 6, the
2
microhardness H n = 273 kg/mm . Damping was measured by an impulse method,
emitter and receiver were polystyrol wedges. For different frequencies
damoing decreased with increasing load on the ball. With higher loads
damping increased owing to damage on the surface (Fig.). There is 1 figure.
U
ASSOC!-'TION: Leningradskiy institut aviatsionno-go priborostroyeniya
(Leningrad Institute of Aviation Instruments)
V)
S TUB~-'I TT 7D: May 24, 1961
Card 1/2

S/122/62/000/()12/004/007
D262/D3O7
Shneyder, Yu. G., Candidate of Technical
6ciences, Docent
Calibration of blind precision holes by
hard alloy burnishing broaches
C j I (~RL: Vestnik mashinostroyeniya, no. 12, 1962,
50 - 53
Various experiments with burnishing
broaches for calibratin,~_: blind holes in 4X15 (4Kh13) steel
,ILL, titartium alloy ;;rC2 (VT2) are described and the results
analyz-:-d. Conclusions: Alii~mment of,the blank and the broach
with third. class accuracy is necessary and sufficient for nor-
ma, burnishine. ~,relininary treatment of the hole should be of
Stier, accuracy that the calibration process is limited to plastic
deformation of' t`ie surface unevenness. There are strict depend-
ences between tiChtness, broaching effort and deformation,
Card 1/2

SI'122/62/000/012/oo4/007
Calibration of olind ... D262/D507
w~,ich permit fairly accurate determination of the size of the
worked ,ole without the aid of measuring instruments. A high
ael:ree of accuracy in normal working conditions can be obtained
'by aiviaing the parLs, after their preliminary treatment, into
i-,roups accordint: to size and then applying to each group one
or several broaches of various sizes, suitably selected.
(Z'xample: I - broaches 10.012 mm and 10.016 mm in dia.(con-
secutively), I! - broach 10.016 mm dia, III - broach 10.021
dia. ) C-libration of holes with first class accuracy or
,~~ven hi,!~her is possible. This method of calibration, compared
with manual abrasive lapping increases the productive capacity
5 times. There are 6 fij-,ures.
C;arc~ 2/2

BYKOV, N.S.; SHNEYDER Yu.G,_
Effect of rolling treatment of an acoustic line on the attenuation
of surface waves. Akust. zhur. 8 no.2:240-241 162. (MIRA 15:8)
1. Leningradskiy institut aviatsionnogo priborostroyeniya.
(Sound waves)

SHNEYDER, Yu. G., kand. takhn. nauk, dotsent
Gauging precise blind holes with hard-alloy smoothing broaches. --
Vest. mashinostr. 42 no.12g50-53 D 162.
(MIRA 16:1)
(Broaching' machines)

SHNEYDER, Yuriy Grigorlyevich, kand. tekhn. nauk; VAYNTRAUB, D.A.,
red.
(Surface quality and operating characteristics of parts of
machines and instruments; shorthand report of a lecture) Ka-
chestvo poverkhnosti i ekspluatatsionnye svoistva detalei
mashin i priborov; stenogramma lektsii. Leningrad, 1963.
(MIRA 17:5)

P/;"/000/002/096/010
Dow=
AUTHORS Shn der,
_Tu.G. and Nikitin
J'i
7, 4
'TITLE, Yinishing butt..end surfmes by pressure
D:.
1- 1963 29-M
PERIODICAL: StWd i instrument,, 000
TEEN A new ban burnishing method for flat and sphorical liat end suifados is.'.,
described. The method'uses.'a resi3.imt3y,motmted:freeVzr#ating large. er. i-1,
Uibe. -We Wrnishing -pass idth
:on a
ball under slight, ssurep and is performed
pre
in diamete. finiWon.surf, lizinari
a ball,-*120 am r. g;Lvca a mirror aces pre
V
-io - 7- artic1cp.'resents the results:of
chined by cutting. 8th.clabs finish. -Thie
experimental investigation in.'whi cimns X staili - bmas' cast ~ U~on'*Md*.
ape C
d' pressure. detexw
duralnnin were buAd .an&ihe effect of the ban d"meter- axA
she
-ball m~untini is described and inustratei. Burnishing -of zrade - v.4r.
mined. The
steel covers by a- 6im ba3_1 oh- a t;urret .3Aihe is aLm peacticedh The siWlicity
-and :".
high productivity.ofthe method*is emphisizeds There are,5 figures.
Cara, 1/1

PISAiUVSKIY, Ylo.!sey Isaakovich, kand, tekhn.riauk~ SENEYDER, YuG,,
kand. tekhn.nauk, retsenzent~ VAKSER, D.B., dots, red,;
VARKUrETSKAYA, A.I., red,izd-va; BARDINA, A.A., tekhn.red,
[Rolling precision threads and splines] Nakat3ruanie toch-
nykh rez1b i shlitsev. Moskva, Mashgiz, 1963. 175 p.
(MIRA 16,46)"
(Screw thread rolling)

PISAREVSKIY, Moisey Isaakovich, kand. tekhn. nauk; SHNEYDER Yu.G.
kand. tekhn. nauk., retsenzent; VAKSER, D.B., dots., red.;
VARKOVETSKAYA, A.I., red. zd-va; BARDINA, A.A., tekhn. red.
(Rolling precision t3reads and slots] Nakatyvanie tochnykh
rez1b i shlitsev. Moskva, Mashgiz, 1963. 175 p.
(MIRA 16:7)
(Screw-thread rolling)

SHHEYDER, Yuriy Gdallyevich; MITROFANOV, S.P., doktor tekhn. nauk,
retsenzent; SKRAGAN, V.A., kand. tekhn. nauk, red.;
VARKOVETSKAYA, A.I., red.izd-va; SPERANSKAYA, O.V.,
tekhn. red.; PETERSON, M.M., tekhn. red.
(Metal finishing by pressure] Chistovaia obrabotka metallov
davleniem. Moskva., Mashgiz, 1963. 268 p. (MIRA 16:8)
(Metals-Finishing)

SUMER', Y4.G.; NIKITIN, V.IL
Finish burnishing of end surfaces. Stan.i instr. 34 no.2:29-30
F 163. (HIPA 16:5)
(Metals-Finishing)

L 13121-63 BDS/EWF(k)/1MP(q)/EWT(M) AFFTC/ASD Pf-4 JD11M
S/1.22/63/000/004/004/006
AUTHOR: Shneyder, Yu.,q. 59
TITLE:
Finishing and hardening of metal surfaces with vibro-rollind
413
PERIODICAL: Vestnik mashinostroyeniya,~no. 4, 1963, 5.0-52
TEXT: in the metal working industry, various methode of finishing and
toughening of the metal surfaces with pressure are widely used, e.g., the rolling
of external and flattening of internal cylindrical surfaces with rolls and balls
(the deforming elements). The microgeometry of the surfaces is not optimum for
some conditions of operations. A new method of rolling, i.e , a vibrating
method is studied. A scheme 'of vibro-rolling with balls and the apparatus for
vibro-rolling are shown. Burnishing with vibrating balls is comparea w2'th other
procedures of roiling with balls and data are given for the relationship of the
Card 1/2

L 13'121-63 S/122/63/000/004/004/006
0
Finishing and hardening of metal...
value of residual deformation vs. the force of rolling and of depression. The
relation of residual deformation vs. the angle of the screen W- was studied and
a graph of the motion of a vibrating ball is illustrated. During vibro-rolling,
the height of the irregularity of the surface vs. the angle of the screen was
studied. The investigations developed the possibility of treatment with vibra-,
ting balls of inner cylindrical (flat and shaped) surfaces, and also the POSSL-
bility of increasing the productivity of rolling with balls because of the
increase of the input. There are six figures.
Card 2/2

Lu-Jy (.1,vitior ;yoviuh, hit i!ci. Loklm. naLlk-, dot f3.
VALITOVY R.Z., red.
[Technological guarantee of the surface quality of
machine and' instrument parts; verbatim r
eport of a
lecture delivered at the Leningrad House of Scientific
and Teelmical Propaganda in Yiar~,h 1963] Tekhnologiche-
0
ske-e obespechenie, kacheE-Tva poverkhnosti detalei miashin
'xiborov; stenogramma leh.-tsii, prochitannoi v LDNTF v
marte 1963. g. Leningrad 1961
33 P. (MIRA 17:9)

ACCESSION NR: AP4033600 s/ong/W000/004/0021/0023
AUTHOR: SILneyder, Yu. G. (Engineer)
TITLE: Effect of machining electromagnet armatures on their service
characteristics
SOURCE: Priborostroyeniye, no. 4, 1964, 21-23
TOPIC TAGS: electromagnet, electromagnet, armature, electromagnet armature
burnishing, ball burnishing . I
ABSTRACT: The results of an experimental investigation of the effects of work-
hardening by ball burnishing the cylindrical surface of a power magnet armature
are reported. The armature was made from brand E Armco steel (0. 04C,
0. ZOMn, 0. ZOSi, 0. 025P, 0.03S, 0. 15Cu, balance Fe). The surface machined on
~ turning lathe had a 6th class r'oughness; after burnishing by a 6-mm ball (with
~ force of 5-6 kg; feed, 0. 2 min/rev; speed, 50 m/min), the roughness was
Card 1/2

L 29963-66
ACC NR. AR5023751 0
L")OURCE CODE: UR/0276/65/000/00'-~/~.,-OL-'-/~-,.,-02'
AUTHOR: ;,loi-ialkov, A. X.; Shneyder, Yu. G.
TITLE: The effect of technological factors on-the precidion"nand ma-,-
netic characteristics of magnetic line elements in small-dimension
selsyns during stamping,
SOURCE: Ref. zh. Tekhnologiya mashinostroyeniya, Abs. 8V204
REF SObMCE: Tr. Leningr. in-t aviats. priborostr., vyp. i~', 1964,
41-45
TOPIC TAGS: metal cutting, metal forming,
ABSTRACT: Results are given on the investigation of the effect ol' tlie:
L)
production precision of flanking die matrix, their position toward the ;I
strip, and the condition of the lip as far as the precision, and tne
nagnetic properties of the pinched blanks of stator and toroid plate-s
of small dimension stamps are concerned. It was established that the
effect of technolosical factors in stamping magnetic circuit on the
selsyn perfonnance property is essential and should not be nel-lected,
By settirzZ a time L-1mit for regrinding., of the flanking., die matrix On

PROSKURYAKOV, Yu.G.; SlMj=,-j G., kand. tekhn. nauk
,u I
retsenzent; MALOV, A.N., prof., retsenzent; FEDOROV,
V.B., kand. tekhn. nauk, retsenzent; STESIENKC, N.N.,
inzh.,, red.
[Hardening and sizing working methods] Uprochniaiushche-
kalibruiushchie metody obrabotki; spravochnoe posobie.
Moskva, Mashinostroenie, 1965. 205 p. (MIRA 19:1)

CS, TIM, Y DE R P Yu . G . P k a n d . t 9 kh n . n a Wic
FinisUng holen by pressure. M-fashinostroitel' no.6:25-29 Je 165.
(YJRA l8s7)

DET., Yu~ G--.1-r :Y'- 'I a Til -1 e IE F
a ct? fc%rme -.r, p at a 0,-
lirl c, nd - r c :i v sh 1 e r a C, n
ing- by Fre-= sur,~ Vy -rl-? ,ly rr.,e !a it, 3 !'Z' r
me-riz.a '- re?hlma :brabo!.tul 3--vll~-nJ,,~-,r..

BUNLIA, L."
Lo rE, I-Jt', G.G.,
:i, Ls. r, r 3 IC 7'
HA 1 E

MP(c) - JD
L 27919-66 EWT(m)/EWP(e)/LW(k)/EWP(t)/XT1
ACC NRz AF6017712 SOURCE CODE: UR/0119/65/000/009/0030/0031
AUTHOR:./Bulovskiy,,,P. 1. (Doctor of technical sciences); Yfftrofanov, S. F-. (Doctov
of technical sciences][Mn (Candidate of technical sciences)
ORG: none ~Y_
TITLE: All-,Union inter-higher educational institution conference on problems of'~
progressive instrument building technology
SOURCE: Priborostroyeniye, no. 9, 1965, 30-31
TOPIC TAGS: precision instrument industry, powder metallurgy, metalworking',, metal
stamping, printed circuit
ABSTRACT. The conference was held in Leningrad 21-23 April 1965, and,
.heard reports on the following subjectsi The main directions of
development and problems of progressive instrument building technolo
gy
,and problems for educational institution workers in the expansion
,of production, improvement of quality and reliability, durability,
!accuracy and technological level of instrument design, etc.;-the
limportance of increased metay strength, possibilities in thisArea being;
'offered by filament-orystallconstructions; powder metallur a
9y-85
!basis for instrument building; progressive methods of metalworkinglo
sheet cold stampingg its current state and prospects; classification ofi
icold-stamped parts; cold non-stamp metalworking involving pressurev
iaggregate machine tool construction in the USSR ard abroad; fine
Aiamond tool working; electrophysical and electrochemical new methods :i
en
Card 1/2

SENEYDER, Yu.G., kand. -tekhn. nauk
Methods of finish machining of metals. Mashinostroitell no.10:26-27
0 165. (MIRA 18:10)

:Lol8o-66 WT(M)&9(t)LW(b) JJP(c) JD
ACC NR, D5026560 SOURCEICODE: UR/0286/65/0001019101171011
INVENTOR: Shneyder, Yu. G.; B a3gy, I,. V.
qY1 Y Y,
ORG: none-
TITLE: Method of manufacturing aluminum mirrors. Class 48, No. 175365
'j ";'
SOURCE: Byulleten' izobreteniy i tovarnykh znakov, no. 19, 1965, 117
TOPIC TAGS: aluminum.,mirror,
ABSTRACT: This Author Certificate introduces a method of manufacturing aluminum mir-
rors by plastic deformation. To obtain high reflectivity in the mirror, the mirror
blank is first surface rolled with a ball at least 100 mm in diameter at a feed of
0.003-0-005 mm, and then electropolished. [ND]
SUB CODE: 11, 13/ SUBM DATE: 06Dec62/ ATD PRESS: ~41~~
uDc: 621.35T.66

go
~v I 6b Ig
13TL
OD
50
e&33~
L-66 0j t
the
ces)
0.-0-Yl--.;i ScIeW %lie
Of of
0 pc-bl'
\kc, V'orle Of tbjB effer-t
'p. 0TUG*- ts'011 Olf e
I
~25
ISL b'a of
iana % IF,- NO aalxs
i -ril oft~~ 13We q t to of Lae
2.r,-f Ole travLo 2a elD
Prot acc, 0rostic av& alla
plr~b VeT b~ea
roto., able
Tmc e :k(je%
.oed,
t~c
SUB C e
0.PIC, eto jo-re Poln%q~~U% jrnetW')'& oletuo
Orrl. ge tile 2.r_C Tmac '0~% .acOv"000
tW
0$
,beet, 9 -le 93' 13D-
,.,.res-a e
2/,2

SMTEYDER, Yu. I., inzh.
Using g7psum in making soundproofing materials. Gor. khoz. Mosk.
32 no-7t35-36 JI '58. P (mmjl.-O
(Acoustical materials),

SWEYDER, Yu.I., J-nzh., SH',!aGIOVA, V.P., kand. tekhn. nauk
Gypsum perforated slabs for soundproofing premises. Stroi.
mat. 9 no.7:33-34 J1 163. (MIM 16:1-1)

B.Ye-..; SHHEYDER, Yu.I.
Friction welding 0 machine parts. Stan.i instr. 28 no.9:40 S '57.
(MIRA 10:10)
(Welding)

00
.3

.1 1 14
i ~,'O 14 i
1. v
ig it K 0 1 u I I 95'r
it 1
a I ... I 1 4V. t,
1
~
'J
--&.-I--L,.AA ,

p, t I-des, y ... tile 'tet'j" jv'jvv~ ,I Imi,
-
fil
t
It l
t
h
fl
i
f
Ii
.
l~t,i p
ntli
v% %i
ti
e prol"
its mvii. bilt ijitiv
y
.'etivity.
'Ily(r. "Ith high c'1111I.-Mic a, tivltv It-thilit% ale
t.t ferturitt glucose. sticirow, K citi-mr. mil glvt.i nil
mitch gre.11,r fh.m that F. sillith
.
1A
14.
WALLUPGOCAL LITIRITA.Itt CLAWFICA710.
gi.
r I
n AV K) a it 4 99 it C9
it r,
0 0
40 0
go 0
zoo
0
'a-
'c- k"0
'~v jog
-4
II ~09
910 n I
Oi
a 0 *see ***I

SHNFYDER, YU. I.
SHNEEYDER, Yu. 1. "On Dates of Spraying (with Bordeaux Mixture) Citrus Crops against
Bacterial Necrosi-s," Sad i Qgorod, no. 11, 1950, pp. 43-45.
80 Sa13
SO: SIRA SI - 90-53, 15 December 1953

USSR/Biology - Antibiotics, Plant Sep/Oct 51
Dioeowes
"Biological Role of Phytoncides in Higher Plants,"
M. V. Gorlenko Yu. 1. Shneider
"Zhur Obshch Biol, Vol XII, Wo 5, 363-366
Discusses the theory of B. P. Tokin who assumes that
the production of phytoncides is a process of evolu-
tion in certain plants who by this process create a
natural immunity to certain bacterial diseases. The
authors conducted expts which demonstrated that the
effects of phytoncides on bacterial. diseases affecting
citrus crops is seasonal, and that the pathogenic mi~,
cj,6ftx&ca plants is undergoing a const change. Their
224T3
conclusions are that phytoncides as a biol phenomena
are to be considered only in the light of the general
condition of the plants which produce them. Study is
now conducted on the effects of phytonc.ides on bac-
terias pathogenic to certain types of plants, particu-
larly the effect of garlic and onion phytoncides on
diseases affecting these particular plants and others
224T4
LI
R. .1
Vj

Bacterial necrosis of citrus plants. Yu. 1. Shneider, (Alt-
nt -Sr - .
Soviet Pla Protection Inst., Mosc6irv dfronj Yikro-
bWoliyu 20, 41-51(1951).-%ecrursis on lem d *
on" -=W
twigs. orange leaves and other citrus plant puts was
to Barlerium citriput ' . Its optimum temp. range is
15~25 e. It survivv% nvur 0* but is sensitive to temp%.
above 2.5*. Its season (Black Sea region) is March to
May. Spraying with 1% Bordeaux mixt. is effective if
aided by ntrirt grove sanitation. Julian F. Smith

Of C
N .0pper 0
(R
are
CId.
SMTDM, Tilt I.
Bacterial necrosis of the lilac. Biul.Glwi.bot.sada no.16:99-102 '53-
(=A 7:4)
1. Moskovskaya stantsiya, zashchity rasteniy.
(Lilacs--Diseases and pests)

SHNEYDER, Yu. I.
"Granozar;' for Con,:
anorAnon,
fasoli
,.I..
12142* p 1u. I.-S, cr. Zel e ie, v.
trol of hneld ore d
d1la b.rlby s bakteriozorn
no. 4, Apr. 1054, P, log""' reduced disease Infe"at""
Three to five g' r kg, of seeds
R"A Increased yi-TOC. t-.bl-.

USSR/Biology Phytopathology FD-i4lq
Card 1/1 Pub. 73 - 8/11
Author Shneyder, Yu. 1.
Title Coryneum blight of apricots in Krasnodarskiy Kray
Periodical Mlikrobiologiya, 23, 6, 698-701, Nov-Dec 1954.
Abstract Faperiments show that the causative agent of coryneum blight of apricots
in the Krasnodarskiy Kray is not basicaLly Clasterosporium carpophilum,
but a new phytopathogenic bacteria called Pseudomonas caucasicum. Diseased
trees serve as a reservoir for the causative microorganisms, and as the
source of infection during the spring- period. Fourteen Soviet and five
non-Soviet references are citea.
Institution The Moscow Plant Protection Station
Submitted March 16, 1954

SHNEYIER, Yu.I., kandidat biologicheskikh nauk.
Contribution of Soviet scientists to the science of plant
bacteriosis ("Bacterial diseases of plante.0 H.V.Gorlanko.
Reviewed by IU.I.Shnaider. Priroda 43 n0-7:121-122 Jl '54.
(Plant diseases) (Gorlanko, M.V.) (MI,'RA 7:7)

GORLMO, M.V., doktor biologichaskiktj nank.; SHNNYDER, Tu.I.. kandidat
biologicheakikh naak.
Summer seeding as means of controlling bacterial pustule in bekns.
Dokl. Akad. selikhbz. 21 n0-8:38-40 '56. (MLRA 9:10)
L. Mosk-6vakaya stantsiya xashchity rasteniy. PredatAvleno sektsiyey
sitghchity rastenly Vaesoyuznoy ordena Lenin& akademii sellskokho-
%yaVatvennjvkh nauk Imeni V.I. Lenina.
(Beano-Diseases and paste)

SHNEYDER, Yu.I., kand.biol.nauk
Goryneum blight of stone fruits and its control. Zaohch. rast.
ot vred. i bol. 3 no.5:24 3-0 158. (MIRA 11:10)
l. Mookovskaya stantsiya zashchity rasteniy Vaesoyuznogo nauchno-
isoledovatellskogo institute zashchity rasteniy.
(Stone fruit--Diseases and pests)

SHITEYDER, Yu.I., kand.biolog.nauk; SAMOSUDOVA, Yr..V.
Incidonce of thn bacterial wilt of corn in the Soviet Union.
DokLAkud.sollkhoz. 24 no-8:39-42 '59. (141RA 12:11)
1. VBosoyuzn3rz nauchno-inaledovatellskiy institut fitoputologii.
Prodntavlona nf)ktniyey zashcbity rasteniv Vaegoyuznoy alaidemii
9nlIskokhnzyayatvennykh nauk lu.V.I.Ioanina..
(Corn(Maisse)--Dis eases and pests)

SIRJEYDER, YU.I.
"Bacterial diseases of plants." Heviewed by IU.I.Shneider. 11auch,
dokl. vys. shkoly; biol. nmiki no.2:191,7-200 162. . (MIRA 15:5)
(BACTERIA, PHYTOPATHOGENIC)

LA 7' 1 CHE W, IM-D., kand.sellskokhozyaystvennykh nauk; SHNEYDER Yu.j.,
kand . lopf cheskikh nauk; KASHM,'iNOVA, 0.1.
Late fall sowing as a method for developing a comparatively
disease resistant variety of sugar beets. Agrobiologiia no.3:
447-448 My-Je 162. (RIPA 15:10)
1. Vsesoyuznyy nauchno-issledovatel'skiy institut kormov,
Moskovskaya oblast'.
(MOSCOW FROVINCE-SUGAR BEETS-DISEASE AUD PEST RESISTANCE)

VLASOV, Yu.I.; SHNEYDER Yu I j PORIZIBSKAYA, N.B,
Virus diseases of pulse crops. Zashch. rast. ot, vred. i
bol. 7 no.2:18-19 F 162. (MIRA 15:12)
1. Vsesoyuznyy institut zashchity rasteniy i Vseaoyuznyy
institut kormov.
(Virus diseases of plants)
(Legumes-Diseases and pests)

KARAVYANSKIY, N.S., kand.sellskokhozyaystvennykh natik;_;~Iqj~YDER, Yu.I._,___
kand.biologicheskikh nauk
From the practices in the protection of forage beans. Zashch.
rast. ot vred. i bol. 7 no.3:24-25 Mr '62. (AURA 15:11)
1. Vsesoyuznyy nauchno-iasledovatel'skiy institut kormov.
(Beans-Diseases and pests)
(Plants., Protection of)