SCIENTIFIC ABSTRACT STOROZHEV. A. - STOROZHEV, V.I.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R001653410016-4
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 3, 2016
• Document Release Date: August 26, 2000
• Sequence Number: 16
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

~r ThIc. L,tc, ~ 1-1 RI,(A - AJe 3?- 12-11/171
I ~Zf-
LA t U; V C,
te tLe titr-.ticn
tltr Is ~-,Illlrtcd,
v t'L
r- s! te tea
r t 1 1. 11
dencribe
f r 1 t I, re. I V -11, 1 F- i (1 1, rc fe -
4, 'A 'E3
i- t,)v "t,:te University -,.nJ 1151:s.~~ ~11
t i ai I ,, e rr. I t e t
of
til. 't i lo d- I. err, i. i. L I an-I tr e z r F,

STOROZHEVI A.
The decioicna of the December and Pek-asz7 P2&~ of the
Central Committee of the CPSU should 6e oarri~A out. Motallurg 9
no,70-6 Jl 164, (HIRA l7t8)
1. Zwnestitell pr"dasdatella zavodskogo komiteta, Cherepovetakogo
metallurgichookogo zavoda.

Abs Jotw rAf Z'14T - "401091Yn, Nn 1)59, In- 27919
Autheir V4ta, P. It.; Eydolfahtsyn, S. I.;
FXk,wa, M. A.; rArezim, Ye. K.
I rij t Not give'n
I t1s) T'he Influence of .1troptomycin Witt, an /Amixturo ef
mol,y~dArium on *.VA An!:-.nl Organimm
Irig llib : i tcLalknlc)g!ya, 190,A, 21, No 1, 67-71
Alba trac t : Prolonged sutcutanorus Introducticr. t,3 vhltoj z1v4 arA
rata of a solution 3f molybdenum yhosphatot (1) in a done
-4 ga= na vot'.3, as In tte form nf adzixturo to
of 0.2
atreptomycin does not Induce ar4 rAgativo Influence on the
Srcvtl, rrd levoloDuent of ycung anlmalA. 116Ultiple In-
IaAtlo%~s of 16-3C' ga= of I and its mixture vith strepto-
0 -IV
mycin do not Induce an irSluence on the fUnction of kidneys
arA diur"als. Prolonged Introduction to ralblilts of
C ard 1/2

ST090'Mr.7, A.; CNIJI'DWT-1, rinnhinist e Ink l.rrmontovegn krnr)A
1:1 for u~-, 1") b-,! 'A it Is for !a tr) livp unler commnism.
Wf,allurg I'i nc;.4t',~.'-,-;4 A p 116 5. (W11A Jqs7)
"'Affy. 11 Itn1o prcir nsionalIna o
k 0
-;w illui -'~ti~r-Aoy promynhl-nn, ;tt Chorapovo,.tAngo
ci~ f
r ~v "'cr
vrgii-h.i.,A v I

PITHICHRIKO. SOKKIR. Te.T.. Intherier. reteenzent; STCROZW, A.M.,
rodAktor; POPOVA, S.M., tothnicheekly redak-tor
(Antifriction materials and sliding boarings; reference manual)
Antifrlktsionnys naterialy t podsh1pniki skollshentia. Spravochnik.
Hooky&, Oos. nauch.-tokhn. lid-vo sashinostroits I sudoetrolt.
lit-ry, 1954. 383 p. NLRA 7slO)
Orriation) (Bearings (Machinery))

"TOROZHEVO
B.N., Inxh.
Exporience Jn the operation or a rubije cf, ~,, nr.z,:
annlysts In an 'AliduatrIal thermal 1-(,wer
onarg. 20 no.-1:9-10 J7 t65. i M i -. ~, )W 1. - )

0 : a

n o, go No au ONG 0 wouff'o

%
:
0
Its @Gott so the ress:
h
"
211
.7=11 low Wrote I
1t
h
s &t , 46. Z, iii r
41 wt A
oil larlict i-falIK" a atArfabow I-k-'.t in 0* rui,
#KIV, t*tmg* .4 fbw MIL ftlaiwt
0 Ibp t al. am ON r Owl $to matiff" I" ad"."it
"
a-hithiefiewtindif -4n
IM15
ff
-I
,,fvjv%qg v,.wh.4 k*4vcA.*j*a- A 41w"t-9 e

"
..I-rvv4.w% Owe M441-t f-fort 4 wmm.#A.. am
S."All
AtA Ou in^fm*% 4 .1 4 MA . dw rnw,so"
:
t-f,- -o""lissy Ok-rvAc. .4 1111V brart wtkKb ~
me t,v p"twnmArv wsl,.mwom~ thl wArs
'
too
'S. I" -n# ft'I"m " Its. W441rd "It"Itior MI I
h Al,*i-f. 111 114% a V1Wfj11f*( Ak IVIn On The mrvTwI- v see
00 tam -49 A, Kjw)AI&
so 0

so 0
be
sets .0
43 Is if a m a It no is
lo'
0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 00 0 0 41 49 46 0 0 od a 0 0 a 0 0 0 40 0 40 0 0 0 0 a 40 046 0 0 1

so The ey"awea"k of wripogom, I
o all .4 A " 44 1 - jq
0 IA. 1,Al,* 1"Op""We 14 tW424-1
hit 0 "4
""444"VI bit 1 1,0 1 1-0
elf
It
ZOO' 0 0
see
090
-00
AGO
see
too
too
0 4 6

I mi
-,h S t

Doc. VeterIn Sci.
D isprt)itlori: cp nint, 40,P Y*-04~rilsm c-f tliF~ Dltjr-~tlc Actionf
Nriyle Derivatives."
3 Jun. 49
?-'$-scow Vet,~rir~vxy Acrilimy
c,
Sun) 7 1

5-,iV(j7R?;V. 1.A.,; BIDXI,'SHTXni, S.I..: BY'KOVA, N.A.
- --
Pharmacological evaluation of bicillin. Antiblottki, Nook-ya 9
no.2:29-)2 )kr-Apr 56 (XLRA 9s3)
1. Otdol eksperimentullnoy tempit, (sav.-chlon-korrespondent AMU
SSSR prof. Z.V. Termollyova) Toesovusnogo nauchno-Issledovatel'skogo
instituta antibiotikov.
(PXUICILLIN, derly.
benzathins penicillin 0, pharsacol.)

v . -, ' i:' ';-Yfolfl, , Y.A. ; R'.RFZ INA . T J.
J
01r f 0 e! t ') f of -no!''thdo-I'm n-%,4, qtrantnnycln on evilmokle
Lwit,l emnviry In lCriel I JArn. I *11's. 71
(M:PLA 11:4)
.i I P44)vnt is I I Air ty t nit t I tiA ti intikov
-Mlnint-rmtvn 2dr,vookhrin"nlym S"R.
(MOLT1.4DENUM ,
mIxture with itrantimp-In. ph7,%tnj. A motO. off. on Pinimnle
(Tilts)
(.lM0,*PTOMTC 1.4.
--lxturm wit!i molybian,m. nh.,rrlol.. A, notql~. off. on
nnin,tis (R-.ifl)

TAYS, R.A., STO-ItOMV, I.A.
- . ,
Pharmncolo of sodium and athylonallAnIne selts Of ChlortAtri,~!ycllne
(-r)tnV.ctn)Uth su-,7-Ar7 In Inglishle Famr. I tokse 21 no,58
76-78 S-0 '58 (MMA llsll)
1. Vsesoyusnyy notuchno-iosledowatellskly Inntitut oLntihiottkov.
(CHLMMTRACYCLIb-F.,
sodium & ethylenedinnine snlts, phnroAcol. (RdS))

STOROVIV, I.A.; ITI)MLIS"Ini. S.I.; VXTS. R.A. (Mosirra)
Iffect of antibiotics of the tetracycline series on the motor activIty
of the gastrointestinal system. Pat.fiziol. I eksp.terap. 3 no.41714--
75 JI-A.- '59. (MM M12)
1. Is Teesoyuznogo usuchno-Issledo7atol'skoro instituts, antiblotitoy
(Air. N.A. Oubernlyev).
(TLIMCYCLIBI pharrincology)
(GASMINTISTINAL STSM pharmcology)

STUAWHAV, I.A.; AMDAWSHTTMI, S.I.
fti,rmtrological evaliuxtion of nystatin. Antiblottki 4 no.3:
65-7o Itr-Ja IS,). (MM 12: 9)
1. Vauso.-nizznrf mvichno-tseledovatellskI7 Institnt antibintikov.
(ANTIBI(nics,
nystatin, pharowcol. (Hus))

I.A.; E'YD.-.'LlS'~TE'YN, S.I.; VEYS, R.A.
Phamaco IoF 1! 1 A
framycin aulfate# Antiblotiki 7 no.10:80(p 00
WIRA 161111)
*'aeor)yuzrrl nauctmo-,.
losledovatellskly InBtitlit antiblati-
kov.

VEYS, R.A.; STORCUMVP I.A.
n-armacology of erythrcaycin and Its derivatives, Ant4Aotiki
7. l'o#12:nOl-1106 D 162. (MIRA, 1615)
l@ 7sesoyuznyy nauchno-lasledayatellakly Inatitut antibiotikoy.
(BRYTHRO14YCIN)

SYKOVA, M.A,; STOP.OZHtV, I.A.1 BERZZINA, Y*.X.
Pharmacology of d-nyolos*rtn#j# Antiblattki 10 no.71626.
629 JI 165, ()a ItA 18 19)
1. Vassoyusnyy nauchno-Issladovatellikly institut antibiotikovs
Moskva,

VA J I V nnu Y,4.S-, ~,Vlti- tokhr-no'"',
t ' I 'I .
Ins,
ting akh
e em I hi I to~" - ic ~- -,r.* r-)l of tr.! r.,p h- I nSh t.
5 A 17; 12)
~ I s i4 no. 4 .- 0 '64. (WP
'n
-i'ltut
I

OlEY N 1 K , I , I k r, r, d , ekon . np, uk r naur- hn , ro t r . ; V01 4; C#* , AnPuc 11r,
NOV, I.I., nnucYx.. aol~r.; FIAKSI' S.
rvtr. SIZ: E 0 V. nauclji.
sotr. ;'.AC'-',AlkV, I.F.., nau-:~m. sotr.; SEFURNGAIA, L.~#j nauchns
zotr.; 3704=4, I.V.r nauchn. sotr.; GE:rISGIICh, G.B., nauelm.
z;otr.; S-EiXEYEV, V.P., nauchn. sotr.; A-LIBODUICII, A., nauchn.
notr,,- LISOV, V.Ye., red.; I;IKOIAYEV, D.N., red.- POVCYW-TVA,A.A.,,
teklu.. rA.
(Interraitional socialist division of labor] Sotsialisticheskoe
r;--.ezh6wmrt)rIn(,e razdolenle truda. Pod red. I.P.Oleinika. Mo.-
Own, lzd-yo ekon. lit-ry, 1961. 350 P. (MIRA 14:11)
1. kkadeT,-.Iya nauk S=I. Institut okonomiki miravoy eotslalioti-
cheskoy alstemy. 2,, Irstitut ekor-oriki mirovoy sotsinlistichaskoy
tet- 4
AN =H (for all except Usav, flikolayev, ronorare-va).
(Corramist countz1o.4-Division of lAbOr)

STOROVWT, LOT Petrovich; BAGR99.ff, T.T.. muchnyy red.; ITXSIU'-YICJ1,
G.M., nnuchnyy red.; rMINA, O.A.. red.; PERSON, M.N.. takhn.red.
(Collected problens on theoretical mechanics and theory of
machnnisms and nnchines] Sbornik zedach po teorstichaskol nekha-
nike I alementam teorli makhanismov i mashIn. Xoskva, Toone
uchobno-pedA9.0K.izd-vo Trudrazervisdat, 1959. 307 (MHU 13:1)
(Nechnnics-Probless. exercises, etajo
(Machnnical engineering-Problems. exercises, otc.)

~','(t7- --fl" 'i - , nLat't0-,,.*V prepriavatei'
t ,(,, I r , , 1-t 0
Charta for the arAlyals and sy-th-als of fvjr-bar l1rkagon.
A'7.v. *.*yi3. urhmb. zav. ; -Ashiroat7. no.."..7, I-P3 165.
(MIRA IS 9*1

V
ST(RUIE-VI M. V.
"Electric Power EconoV. in ForgIng and Stamping Shops,- Collection of Data of the
Scientific and Technical Session on Mectric Paver Economy (Sbornik mteri&lov nauchno-
tekhnicheskoy sessti po ekonornli elektroenergii), NO II, WIME, 1949, 139 pp.
All-Union Scientific and Technical Society of Power Engineers Moscow Divisicn, Industrial
Electrical Engineering Section
W - 153(8, 61' Dec 50

3,70-)(v'tr,'7 Y I ',c, r.,! . t -Avn. rwilc
I . so
Dnsirnirf, nu-m~, wid stoppAd fee(' rviA nr,m-~iri.
~2-%l 151. OTRA 1~:7)
(fill hydrq,-tl'.?-

ani Z&V, '!.V..-
IlTekhnolopiya metallov (Technology or Metals).
Moscow: %%shpiz 1195. 637pp R :4
K. 10 Reviewed in westnik Mashinostroeniya 34
No 11 103-8 (19-)

STOR01MV, N.V.. redaktor.
Introduction. On: Syshkov. D.A., ad. Zkonomila metallov v kasnochno-
thtampovoohnon proisvodstve. Moskva. 1953. P-3-13.) (KIJlA 7: 1 )
(Forging) (Panching machinery)

6-rowo-Z HEVII M V,
RTSUOT. D.A., rodaktor; OTOWMT, NsY*# redaktor; KIMWOVA, S.D., redaktar;
SAMUGMIKIY. T.1j. . InvZoner, FlMor.
(Zoonouislng metals la forgbg and stamplMl Zkononlia metalloy v Ims-
nechnoshtampovochnou prolsvodstvs. Moskva, Oos. nauohno-tekhu. Is&vo
mashinostrolt. lit-ry, 1953. 273 p. (NUIA ?.- I)
(Porging) (Phwblng swahinery)

ST(2RDZHKV, M.V.
..
Sorm tasks In the field of forging. Yest.w%sh.31' no.1:7-11
ja 154, (MLELA 7~2)
(Forgi ng)

STCIRCWMV, N.V., redektor; KAMINVA, U.N.. tekhnichookly rodaktor.
(Progreast a technology of swaglUl Progressivnaia tekhaologlia Corte-
chey shtampovki. Kookwa, Goo. nauchno-tokhn. isd-vo m&ohluostreft.
lit-ry, 1955. 141 p. (Km 9M
I.Dow Inshoners, I tokhalka ImeAl F.I.Dzershinsksgs.
(Forging)
I

,IIADILIN, Anatlly Nikolayevich, kanlidat takhnicheakikh nauk, DUBININ.
Nikolay Petrovich, kandidat takhnichookikh nauk; ZHATTUNOT. Petr
Prokhorovich, kandidat takhnichnskikh nAuk: IWAYIN, Tasilty
Stepanovich. kandidat tekhnichookikh nauk; NAZAROT. Soorgey Tikho-
novich, kan4ldat takhnieheskikh nauk; FASCHBXXO, Konstantin
Petrovich, kandidat tekhnichookikh nauk; PMT, Ttktor Alsksandrovich,
k,andidat takhnicheskikh nauk; POPOY, Tevgeniy Alsksandrovich. kandt-
dat takhnichaskikh nauk; RASTOBOUT79T. Ivan Sergayevich, kandidat
takhnicheekikh nauk; STOROUST. Mikhail VasillyevIch. kandidat takh-
nichaskikh nauk; XCHSTAXTINOV, L.S.. kandidat tekhn1f!hesk1kh nauk.
re4aktor; ROZXHBMG. 0.A., kaodidat takhnicheskikh nauk, redaktor-,
MUDXL'. B.1., tokhnicheskiy redaktor
[Technology of metals] Takhnologits metallov. Pod red. N.F.Dublainas
lid. 2-oa. Moskva. Goo. nauchno-takhn. isd-vo mashicostroit. lit-ry,
1956. 550 P. (KIZA 9:8)
1. Prepodaystelt Moskovskogo fyschego takhnichealrogo unhilishchik
In. Baumana (for Oladilin. Dubinin. Zhnvtunov. trasavin, NalArov.
ftnchenko, Popov, V.A., Popov, Te.A., R&storguyev, Storozhev)
(Metallurgy) (Metalwork)

STOROUTV, 4.V.-, PXRLIK, I.L.
~- , - _ _ - . llwwle4V
"Inginmering methods for evaluation of stresses dq* to natal
prAsawnrk." Vast. mash. 36 no.9-.83-88 S 156. (4LRA 9:10)
(Urstins and stresses) (getalwork)

ACIUMAII. U.S.. xssIu2hennyy defoytell neuki I tekhritki, red.: BOGUSIAYbXIY,
B.L., prof. rt#4.,- OLIZMAVVIIKO, D.L., kAnd.trVriu.nvuk, rei.;
HABINOVICH, D.Y., ksnd.t~khn.vauIr. red.; SASOV, Y.Y.. lmnd.tekta.
n&uk. red.; STANUVICH. T-G.. insh.. red,; ST Imod,
takhn.nmuk, red.; GOKUIIA. Y.B.. red.: SCKOLRIT".Y., tokhn.red.
0
(Present-day trends in %be manufacturing of engineering equiprAnt;
a collection] Sovremomwe naprevientis v oblesti konstruiroventis
tokhnologichaskogo obomdoyantia; sbornik. Kop~-Yv# Goo.usuchno-
tokhn.1r.d-vo fmahinostrolt, lit-ryg 1957. 265 P,, (NDU l1.-2)
(Machine tools)

I jjQOK E'XPLOITAT,1011 ov/ 1167
3torozhev, Mikliall Vasil 'yevich, and Popov, Yevgeniy Aleksandrovich
Teorlya obrabotki metallov davienlyem (Theory of Metal Forming)
Moscow, Mashgiz, 1957. 323 [). 11,000 copies printed.
Reviewer: Unknov, Ye. P., Doctor of Technical Sciences, Professor,
0
Ed.: Ovchlnnikov, A.G.; Tech. Ed.: Model', B.I Managing
Ed, for Literature on Heavy Machine Building (Mas~g;,Z): 0010vinj
3
.J. Ya., Engineer.
PURPOSE: This book is Intended for students of polytechnical and
mechanical engineering vuzes specializing In forging and pressing,,
and for engineers and technicians.
COVERAGE: The book contains fundamentals of the theory of metal
forming according to the curriculum approved by the Ministerstvo
vysshego obrazovanlya SSSR (Ministry of Higher Education, USSR)
for polytechnical and mechan1cal engineering vuzes. The following
Ca rd- 17AD

Theory of Metal Forming
11G
personB are mentioned as having contrIbuted to this field:
Corresponding Members of the Academy oil' Scienl-es, USSR~ V,D-
Kuznetsov, A.A.Ilyi.-shin, and V.7. Sokolovskiy; Academicians
N.S. Kurnakov, N.N. DavIdenkov, S.A. Khristianovich and L.S.
1,-~ybenzon; and S.I. Gubkin, Ye. P. Unksov, G,A. Smirnov-
Alyayev, N.I. Korneyev, I.M. Pavlov, L.A. Shofman, A.Do Tomlenov,
K.N. Shevchenko, and I.A. Norltayn. There are 68 references., of
whIch 61 are Soviet --and 7 German.
TABLE OF CONTENTS:
Foreword 3
Introduction 5
Ch. 1, Nature of Plastic Deformation 8
Structure of metals 8
Concept of plastic deformation 12
Card 2/9

GOLUN, B.V.. rodaktor; ACMKAX, A.S., saslushennyy doystal' usuki I
tokhniki. redsktor; DOGUSLAYSEIT, D.L., professor. rednktor,
GLIZKARINKO. D.L., kandidat takhatchoskikh usuk, red*ktor;
RABINOVICH, B.V., kandidat takhajohoskikh nouk. rodaktor;
HAXHSHTAPT, A.G., kAndidat tekhatcheskikh nauk, red4ktor;
SASOT. Y.T.. kandtdat tokhnichookikh nmuk. r*dxktor--JMQ1=T. K.T.,
kandidat tokhnichookikh sauk. r*daktor; SOKOLOTA. T.F.. TWMITM
rodaktor.
[Present-day trends to vachine unnufacturing; a collection of
articles] Soyromennyo napravlonita v oblasti tokhnologit vashino-
stroontla; obornik. Kooky^, O**.umuchno-tokhn.izd-vo mashinostralt.
lit-ry, 1957. 363 p. (KIRA 10:11)
(Nachine industrY)

ACHURKIN, N.S., zaaluzhennyy dayatell nouki i takhniki. rodaktor; GLIZMA-
XKNXO, D.L., kandidat takhnichookikh nouk, radaktor; RABIJOYICHo
B-Y., kandidat tokhatchaskikh nauk, redaktor; STAMVICH, T.G.,
Inshener. redmictor; PTOROZZM kandidat takhnichookikh nauk,
redaktor; GOKIJN, Y-B'.. radaki or; !ARYKOYA. GA., redaktor
izdatellstys; SOKOLOVA. T.F., tokhatcheskiy redektor
(Problems of increasing labor productivity In the machinery Industry;
a collection of articles) Voprosy povyshentis proizvoditallaosti
truds v mashl motroentil abornik. Nook-vs. Goo. asuchno-tekbo. tsd-
vo mashinostrolt. lit-ry, 1957. 510 p. (MIRA 10-11)
(Machinery industry) (labor productivity)

- -'r , , . j ..:j: iauk; ?elr
ru. '. ;.i. nb4'- .- * ",.-%
A.-
to 1:4; Uy. )i any koon-
,Arovich. :.::ininovich. om-.. .~at to.:!., sL;'ic; . w ~Ik;
ch, raz'k.-

ias.'
n i A, Ira ad ids t i a he ;a u iA Xi-' _M.0 .

eree-(rovikA , k-e~
mdek"t Cr. A. A. -.,I cr'e:

t Toc h no I c i-,- mstb I !ov. -od
Irl . J-s. t, ttnt
1957. 56- %.
k ye tale)

GAZLROV. Artam Tjgranov!,~h,: ST(L'ROZM.. X.Y., rAi.; MHOVA, V.A.,red. tri-va.;
SMIRNOVA, G.V., takhn. rei. '
[Linkages in forge presseal $h*rntrno-ryChszhqq9 makhentimy
ku2me'l-ino-pressovykh mashin. Moskvsj Us. muchno-toftne W-vo
vishirinstrolt. lit-py, 19S4. 197 o. (HIPA 11 d2)
(Machinery, Kine-Attce of)
(Metalworking -Achinery)

voRcynn. M.V.# krind.tekhn.nw+, dots.
Rechanicnl dingrRm of deformatlons. Sbor.XOSSTAjiriN no.4:5-17
158. (XrRA 12:4)
(Deformations (Nechoknice))

UNKSOV. Teveenly Pavlovich, prof.. doktor tekhn.nauk; STOROURY, N.V.,
kand.tekhn.nauk, red.; SUPANCHMIKO, B.S., rod.izd-va; flulwAsq'i- -
B,I., tekhn.red.
[Inginooring theory of the plasticity; mothode for calculating
deformation stresses) Inshenernala taorita plastichnosti;
motody raschatn usilil daformirovenits, lzd.2., parer. Moskva@
Gos.nAuchno-tekhn.Isd-vo mashinostroit.lit-ry, 1959. 327 p.
(NIU 12;8)
(Plasticity) (Deformations (Mechanics))

KOWHIN, TevlTniy Nikolayevich, kAnd.takhn.nAuk-, tTZHCHRRIK, T.T.,
prof., doktor tekhn.nauk. retpentent: STOROUIV. N.Y.. kand.
teidin.nAuk. red.; ILIKIND. V.D., taklm.red#
[Banding, stretch-formin&, and straightening on presses;
techniquos nnd equipnentj Gibka. obtlashkA L preyka na
pressnkh: takhnologlia i oborudoyants. Moskva, Oos.nauchno-
tokhn.ird-vo minhinostr.lit-ry. 1959. 359 P. (MIRA 12:10)
(:Sheet-metal work) (Notalworking machinery)

11 .
L,I (I ) VICE' I BOOK FULOITATION SUV/,2944
Gubklti, Ser" y Ivanovich (Deceased )..,Mikba.'L I Va-I Ivevich jL2L&i6-~
E~,rls Favlov-1ch Zvoronoj, V,-t,3111Y
NorlLsyn'. Yt-':..- If
n

DUBININ, Nikolay Petrovich, kmnd*tekhn.nsmX; ZHXVTUNOV, Petr Prokhorovich,
knnd.tekhnonauk; STOROZOT, Mikhail fasillyevich, kand.tekhn.asuk;
POPOV, Taygenly Alsksandrovicb, kaud.tskbn.nsuk; RAZUOT. Sergay
Tikhonovich, kand.tekbn.nauk; UADILIN, Anatolly likolayevich.
katd.takhn.nauk; KRASAYIN, Vaslliy Stapanovich, kand.tekhn.nauk:
PANCHINKO, Konstantin Petrovich, kandstekhn.nsuk; POPOV, Viktor
Aleksondrovich, kand.takhn.nsjuk; RASTORGUM, Ivan Sargeyevicht
kand.takhn.nauk [deceased); SIMSHURINA. Te.A., red.isd-va; UVA-
ROVA, A.F., takhn.red.; MOMILI, B.I., tekhn.rad,
LTachnoloej of wtals) Takhnologila metalloy. Pod red. M.P.
Dublnlna. lid.3. Moskva, Gos.nxuchno-tekhn.1zd-vo mashinostroit.
lit-ry. 1959. 564 P. (MIU 13:7)
1. Prepodavatelt Moskovskogo vysshogo takhnicneekogo uchilishche
Imani N.Te.Baumana (for all except Shemshurina, Uvarovat "ell).
(metals) (metalwork)

IN
11

47

Ilk
Ion
I I F"" 841
Ila I
Jill 6;
fill
lit

SOV/122-59-4-15/28
AUTHORS1 Str)ro2hev X V., (Cand.Tech.Sci., D**"'~ )s
(Cand.Tech.Sci-9 Dwemt and
Kirsanoval S.B.t Engineer
TrrLE: Refinement of tile pattern of the Deformation Core and
Dottirmination of the Force in Die Stamping (Utochnenlye
formy ochap doformatall I oprodolonJYO usillya prI
jhtarapovke)
PERIODICAL: Vestnlk Yashinostroyenlyal 1959, Nr 4) pp 55-61 (USSR)
AB3TRACT: When forging In an open die, after the first stage of
filling the die cavity, the second stage consists of
pressing the excess metal from the die cavity Into the
flash and calibrating the height of the forging
(upzetting). The maximum forging pressure occurs
(luring upsetting. To find the relation between the
dimensions of the deformation core and the thickness of
the flashv tests were carried out with lead. Specimen
blanks were split in two halves and a grid was drawn on
one half. Both halves together were upset in the die,
after which the half with the grid (Fig 2) was photo-
,~,.-Ard 1/4 graphed. The deformed grid exhibits three zones, namely
the zone of large deformation, the zone of small

SOV/122-59-4-15/28
Rofinement of the Pattern of the Deformation Core and Determination
of the Force in Die Stamping
deformation and the undeformed zone. The first zone
Includes the flash. The tests were carried out with
different flash thicknesses. Specimens with a large
thickness revealed the three zones more clearly. The
dimensions before and after the final forging deformation
are tabulated (Table 1), Several geometric quantities
were recorded in specimens after the tests leading to the
mean height (thickness) of the flash during the
calibrating period. In forgings with small flash
thicknesies similar to those obtained In practice, the
deformation core Is small. To obtain a better measure
of the deformation core, a further test was conducted.
The specimen was photographed after upsetting and the die
was ;ubsequently ground down in the arting plane by the
amount of flattening of the flash. Re flash formed
during upsetting was removed do-om to the forging diameterg
and the forging operation was repeated. A substantial
degree of deformation was achieved in the centre of the
specimen without changing the conditions of upsetting
-ard 2/4 and the degree of deformation of the flash. The plotting

GOV11232- 59-4-15/26
Refinement of the Pattern of the Deformation C"ore and Determination
of the Force in Die Stamping
of the deformation core by this procedure presented no
further difficulties. The relative thickneJ303 Cf
deformation zones were plotted against the relative
diameter5 of the forging (Figs 5 and 6). The thicimess
of the first zone at half the forging radius differed
little from combined axial thicknesses of the first and
jecond zones. The thickness of the deformation zon,3-i at
half the radius away from the axi3 was also plotted and
found, like the thickness along the axis, to incitase
progre5sively with the ratio of the diameter to the flash
thi--kne.ss. The thickne3s along the axis of the
deformation zone did not vanish even at small diameter/
fla5h thickness ratios. When the3e ratios were about 20,
the ratio of deformation zone thICkne3S to flash thi,imess
was about 3.5. The diameter/flash thickness ratio also
affects the pattern of the deformation zone. At a ratio
of 3, the deformation zone is a bi-concave lens. At large
ra-tios, tile "lens" becomes bi-convex. The usual
Card 3/1+ analytical solution for the deformation zone assumes this
to be conical or a stepped profile. A better solution

jOV/122-59-4-15/28
Refinement of tl-,e Pattern of the Deformation -Coore and Determination
of the Force in Die Stamping
assumes an elliptical shape. With the help of simplifying
assumption (plane strain), the forging pressures are
obtained by analysis. For forgings which are round or
nearly round in planform, the equilibrium equations are
used In spherical coordinates when the deformation is
ax1ally !iymmetrieal. The analysI3 of this case is also
treated.
There are 11 figures, 2 tables and 8 Soviet references.
Card If/If

oq% o
-InITV-1 -T-M
-I V. t" 1101
jo ... tic
-.pi -;V`4#j%uq
-tq; I I wm. 4

BRTUXHAIIOT. Indrey Nikoloyevich; VfOROmms NoTep kand.takhn.nauk#
reteenzent; MMIZ. TuoL*g Insh., red.isd-va; UTAROTA. A.?..
takhn.red.
[Forgine. and die forgirig) loykm I ob"emale shtempovka.
Moskva, Goo.nauchno-takhn.isd-vo washinostroit.lit-ry, 1960.
375 P. (MIRA 14:3)
(Forging)

GUBKIN. Sanjay lynnovioh [decensed]. Prini-vil uchnstiye STOR02M. X.T..
PIMIN, I.Ta.. rateanzont; SHIRNOT. T.5., red.; ULAUOTSXATA,
I.A., rud.lzd-va; ISLAYrIMIA, P.G.. takhn.red.
(Plantle deformation of metals) Flostichasknia, deformntelie
motallov. Moskva, Goo.nauchno-takhn.izd-vo lit-ry po chernoi
i tsvetnoi matallurgil. Vol.l. [P"sicowchnnical principles
of p1natic deformation] Fiziko-makhanicheekle oenovy plnstl-
chankot deformatail. 1960. 376 p. (MIRA 13t2)
(Deformations (Nechanics)) (Phyoicnl metallurrj)

PEASE I BOCK EXPLOITATAUN SC 7/47 1 F
3,,vremennoye sostoyanlye I napravlenlya razvltlya tekhn--logil mSsh1n-,,fitr-,-yen1Aya
I priborostroyenlya (Present State of the Manufacturing Processes In the Ya-
chine and Instrument Industries and Trends for DeveloFment) Xoscrvp Xzshgiz,
'163 P. 5,000 Copies printed.
Ed.s Anatolly Nikolayevich Gavrilovp Doctor of 'technical !;eiences, Professor;
!~:anaglng Ed. for Literature on Machine Building and Instrument Construction
('-!ashgiz)t N.V. Pokrovskiy, Engineer; Ed. of Publishing House: G.F. Kochetoyap
-Englneer; Tech. Eds.: V.D. ElIkind and A.Ya. 7ikhanov.
PURPOSEi This book Is Intended for technical and sc!entlfic personnel In the
machine and Instrument industries and for students and teachers of schools of
higher education.
COVERAGE-i The book deals with current theory and practice in the manufacturing
processes of the machine and Instrument Industries and Includes discussions on
trendn for development. The physical nature clf the pr"esses and their tech-
rical-economic features and possIbIlitl4es are cc-nsidered. Particular attention
Is given to n;--d and progressive processing (supersunic machinIng, electric
machining, cold resevorking, precision casting, precision pressing, new methAs
of weldings ntc The book consists of papers presented at the All-'~Mon
-f,'nrd i/11

FreBent State (Cont.)
SC";/4 7 18
:k,-Iontific-Industrial Conference on "Advanced Xijch!no and Instruirmnt Yanufse-
t 1.ArIng Processes," hold in 1W. The paperg have been reviced in the light
of recent developments In the field. A chapter to devoted to the autc-catIcr,
and mechanization or the Industry. Scvlet and references accc=-
pany some of the chapters.
TABLE CF CGINTE1,73:
Foreword 3
1 n 1. rrduc t I on [A.N. Gavrilcv, Doctor of Technical Sciences, Frofeszi~rl
PART 1 . THEORY AND PPACTICE IN IMANUFACTUIRlING FRCOESSES
OF THE WHINE LND INSTRUX-ENT INDUSTRIES
Ch. 1. -the Elements of 7ypification of Manufacturing Prccesses In Yachine
Building [F.S. DemlyanrA, Doctor of Technical Sciences, Professor]
Problems connected with the typification of manufacturing processes
2. Bas:1-1 principles of classification c,f parts and typification of their
manufacturing processes
Card Ql-~-;

V/4'1
10jwhining errors caused by deformatAnns of tk,e w,~rklng system under
t.Lo Flotl,-,n of 7!utting frrcen 83
~7h. IV. The [Present] State of Frounding, and Prospective Prcblems [D.P.
Uct-r of Technl~~al Sclenceil 98
Ch. V. The Present State ani Problems of Die-Forging Pri~~cvaaen [M.V.
StoKgzhev, Candidate c1f Technical 107
11 r
Heating process _'7
2. Forging process 100
J. Hot die-11"ormIng Tr, oess 11,4
Ch. VI. The Present State of Cold Stamping In the Mw7hine and Instruzent
Industries and Basic Development Trends [A.';. Yal(~v, Candidate of
Techn!~7al Sciences] 128
1. Features of the [present] state cf cold stamping 128
4. Basic trends for the development of cold stamping 130
3. Mechanization and automation of cold-stamping processes 144)
C, h . VI I . Surface Cold-Plastic Wcrkirg cf Metals [1.7. Kudryavtgev, Dcctor
cX Technical Sclences, Professorp Yu.G. Shzneyder, "'andi'date zf Tech-
nical 6,:~Ienceo, and Y~i.!#'. Shukhc~v, Docent! 163
Card 4/1 1

and
17 .7

ri"
I % a if :lye
it 'A A -r.:ty&t
7.
jk-, a
gave 4-.* r
At:
t I ores-
o v
-,7
m ~T this
It dnve-cp~.ent of
z in 4!, jl!! 43~e~ ,ally
'n
C- rr P -:7 t! -7 L R! f . 2:
-etalworX-
-Ine
Ing 1-n -.r!
f., a d o
.reasing
-.I s
rf? at sup-
7

17 oW I
4~ffl~ !pn!. yet
i n
ek,
7. T
call
.*eat
s T e:~
a 2
-t. 1: 7 1~ It 7 t-
ca. i

'STUSAIXV, M.V.p kard.Lekhn.rAukg dots.
BerAing of the columns on hydraulic presses. Sbor. MDSSI,'AhY.IN
no, 505-125 160. (KM 14:2)
(Hydraulic presses)

Z;TUhOZH6v, M.V.
Explanations to the article "Dynamics of a friction presses.*
Veste mash, 41 no* 5:55-56 My 161. (MIRA 14:5)
(Power presses)

ALEKSEYEV, S.A.; ZWA'I.r,., D.F.; KML-XiSI-11 V.V.; KALCV, A.S.;
MARTSIT-OWSM, P.L.;MOID"ACK, A.Y.; I'SWWV, V.A.;
TEVEROVSKIY, P.A.; UISIN, R.I.; DK~~SIN, A.A*# rotsenzent;
SOKMOVSKIT, M.A.p reteenzent; STEFA14=9 Y.F.v retsenzent;
SlOhOZHEVO H.V., retsenzent; TILMCV, P*Iop retsenzent;
PALIKEVICH, A.S.0 retaonzent; CHUMSHEVICH, V.A.# retsenzent;
KHISI11p R.I., red.; GWTSOV, A.D., red.; VOLISYM # V.S.,, red.;
STRUM "IAKII, Ye.l., red.j SWENOVA, M.H., red. 17.d-va; PMELO,
B.1*9 takhne reds
[Manual for the ostablishtent of norms in the machiner7 industry
in 4 volumeel Spravochnik normirovshchika-mashinostroitelia v
4 to,-akh. Poskva, GoB, nauchno-tekbno izd-vo rashinostroit. lit-
ry. Vol.3. (Establishing norms for founding, stamping, welding,,
pairting~ total plating,, and woodwork) Normirovanie liteinykh,
kuznechrWkhp chtampovochrqkh, svarochMkh, lakokramochrykh rd-
bot., metanopokrytii i derevoobrabotki. 1962. 671 p.
(MIRA 1514)
(Fachinery industry-Production standards)

Miklail 1, e-niy Aleksnndrovich;
dot.-., "etcenzentj
-n . Z-49d .
YORITEYEV, V.A., red.; GCR~~K;LVA, S.S., t,~,kl~
[neory or ri~,ntal-wo:-~Irw by j~res.-ur"I Teorlia obrabow me-
tallov L.,11.2., jo-(~r. Moskva, Vy:,-sl.nla ,ftola,
P63. 3P,8 -,,. (NIRA 17:2)

,A"F,- SEAYA
wo born roi7jrg curvey of fo.relgn engincer-
obzor za-
ico
(!,'I;-.A 17:

-% I ~I I .. .~ - ~ ~ %..; .,-,; -~, ": ~ -. . '.. , ;. , , - .1!~
I i
. ~ - *,~- f- ' ~i e a Li t on-a t 1 -: G :* " c or- , -' ~ %.;- ' . r, -:' I tjr-- :- ! a r,
t :; ~ ~; I- ;-., r, ~-. . " r k , , " . ." 3 no . 111 ;, 4-2 5 N it - .
M I FU 18: 3 )

H 1 V !i k I KO'i "il F ',,f A K U-1 , A
MA 8)
Zhukc,:)' Glavnyy Inzh.
nn-h;y ~-;'~nln;kTor NJ -B f o.
Mo-fri~,-,vikoy !-'iq (for Kislynki-,,v).

n,;j
al
tv

IY.SYIJYOV, V.A., dotsont, kRnl.tekKn.nquk; '"XROZ111MI, dotaentp
knnd. tAklin.nnuk
Inveatigating the ntrength of l=ber-cvrylnp,, lie-ting dump barges.
Trudy NIIVTa no.l4t43-54 163. (MIRA 1714)

ST OR 0f V, 'I. F. , "*rob' e-is of the streneth and desirn of c,)nnections
in -mahinp Phips." Vin River Fleet USSA. rorlkly In!.,-t of Water
Transport Engineers. Chair of Hull Desim and Structural 'Ifechanics
of 'hips. Gorlkiy, 1956. (rissertation for the Derree of Canrli-
dRte in Technical Sriences.)
Source: Knizhnaya letopis' No. 28 1956 Voscow

STORGZHI;V, ikolqyju 'I.Yu..:-edaktor-. SAGALI. A.L.
'riil 13* O'n i4 n t ;V I TASITT I IIA A -1 a *K t o r I r -Aa t a I I a t va ; KRA SKA U
AJ..takhnlcheskiy redaktor
(Determining strains to connections between ships during
towing] Opredelenle uslill Y sviastakh methdu sudsal pri
tolVainit. Moskva. lzd-vo OBschnot trantoort.0 1956. 177 p.
(KLRA JO.-4)
(Towing)

STMOZHSV. !1. P.,)mnd. t etch n. nank
Iffeat if the heeling of a ship on the forces In coupling arrangovents.
Protm-takh. abor. no.4:31-17 159. (VIU, 13110)
1. %uchno-1*91#3dovatellskly tustitut vodnoeo transportn,
(Towine)

STOROZHZV, 14.r., 1rxh.
Fi-ild testing In the pusher handling of towe vith space at thm st4rz.
Rach. transp. 18 no.4:31-33 Ap 159. OGRA 13il)
(Towtug)

I ., ~ ~,
w m 4 .4 .: . , I . ...
L, !: 0 1 # , t% rx 0 11 r, f -d's~ ne! - t-:' r - 4 ~;c` - 1, ~ I - ;t- "' . t 1, fkn Ir. 1,~ -.1 .9 .
:,~, fer). ( .,,: -L.- I -,~ . -~ )
I
(Tj:,,I)ws ..-TA il, I v,)

STO-Ar-ly-W, I.y., j,_=d.t9khn.nauk
dy of corrosion* Rach.trangp. 18 0-104'SS
Device for stu Nift 1~0
0 1590
(Corrosion and antlCOMStTOS)

ARTAMOUTCIECY, A.; GARIWJV. K.;.STOROZ13T. 1.
Use nf sectional barge trains on Siberian rivers. Rech.
transp. 19 no-7:12-15 JI 160# (XIU 13 '. 8)
(Siberia-Rivers) (Towins)
w

STOWMILV2 N., dotsentj SUVELLV, M.
Wider use of ship handling by the downstream pabing method. Recb.
tremsp. 20 n0-4:15-16 Ap 161. (MITIA 140)
1. Novosibirskiy institut inzhonerov vodnogo transports (for
Storozhev). 2. Kapitan teplokboda "Akademik Villyams" Irtyshakogo
rechnogo paro4odstva (for Shevelev).
(Tqving)
TW

STOROZU-Vi N., inzb.
Effect of angular and cross currents on the handl of pusher barge
trains. Reah.transp. 20 no.6:43-44 J9 161. (PaPA 144)
(Barges-Handling) (Wand navigation)

STOHOUEV, ltllolay Fadorovich; 171"'EOVICH, G.11 ., red.; bEl: AK, 'Yu.l,.,
retsenzent, KAII, F.M., red. izd-va; BO-11.1VA, V.A., takhri.
red,
[Blementail strongth calculations of ~;hlp structurea and
-,ni3r - amye rtxch4ty proclmostl nxr-,ovykh kon.-
rech, zjZler-ent.
struktnii i vekhani=nov; abornik zadach. Mool-va, Izd-vo
"hechnoi tran--port," 1962. 260 p. (FXAA 15:U)
(Navnl architecture-Problersy exerci-~as, etc.)

STOROZHEV, N.Y., dotment, kand. takhn. nauk
Effect of linkage rigidity and the tine length of force
application on the amount of istress occurring in the con-
necting links. Trudy HIIVT& no.101119-127 162.
(MIRA 1616)
(Towing) (strains and stresses)

TUMHCRZNKOO P.Le, irzho; STO=HEV# NoYs, kand. tvUw,.
I - ........-
Laying underwater pipe.Unes by the froo immersion method.
Transp-stroi. 23 noslWS-32 0 963. (MIRA 17#8)

ORO: None
Cr. f, or&*
Novo;zil-4 ri;k I mit i t u lii-l~eri-ri,v ,r t IL. ru,,.y, no. 10, l964.
Vopro,3y gidr( i k 11U 3"
-,tokhr, roblems of 11ydrmilic eng rin 59-()
interference, pendulum mitionj
c 41. i~~r; , I i,~,ht
S?YIP A) "? P r- Oq Ir/0 Al
luth,*-'r d 1. scuszsc s t hie. re (if buoy signal lights In
-1- h,,tr~ ""liatal plant, ~i,~Iv io;,. c:' lruii-. Cardqn suspensions
I ror Qil,- 1~vris i 1i r lo v.. i w AJ ?- h, tie puricrm of re i-ic A ng
,-Ve
t'-.c ~v:q~, i t UZI... E,-" ")!.. o i I :at i otir, ir, t~-.A- ,314n 11 1 i ~A-- t ~i,,ir Ine rct.~try mot I ons of the tuol
ha"re shown, ti.,at mor"t 01, hav,- the opposite effect,
-y e r,, 4,~ -.. '. "y i.-v:rtasr r~tth,~-r of rotary moticni, 05-
'j' L):' [I ;,1Lj'.tj1jjt.r-~ On ~j r()Ckj,'jg JP-u, ',ivre:! In tin effort to clar'fy this
..e art, A
thrtt tLe ,olr," c,!' th,? pendulum describes har-
1, "or"s 'n Q h or' zor, -.L' p! ri:-.t! ar; it s j!~owr, h at th-? perdul= 'At self
'nazi a c'u'pleA mozlic-n conalating Of two It is shown that the
Ca(d UX: 627 .9

ACC NR:
v en;; i 1-M "ky L. t 1, i I i zi I t S P~ r I od w iI, re s 1L c t t o t h a t
' ' cul.'silkral,ly grestter an-d -init;;ill disturbances frcn ex-
of Z.
(C. g. eusts of Wind) arc S.Ince It Is practically impos-
'n in,reane tw~ perlod f the to any ~r al. extent try increasing lts
0 e
the !W-i.or the use of weiiirhts on t,ne up-per section to increase the
:wnt of lcorLiri with respect to the axis of wisperislon. Signal narker designs are
gAven s.,.owini* Incorporation of the propose~l nethcd for increasing the period of the
pendulwm. Orig. nrt. has: 3 figures, 11 formulas.
Sull CODE: 13 SUBM DATE: None/ ORIG REF, 002
Card 212 HLP

N.F.
the qt"np.!, ")f a r~n
till! nbo-le water
IT V, 7)
Lcrdngrad (for

'71 01 ~ I r
L, ~ - ;,. u , ". 1. k - - - , i -, ~ " , ; lA7N"*.K*l'f,
.1 . .- 1- - -. , .. " " W , ~ . I , J. rp;,
-1 .* !: . I , rf~ .
" ~nu,: A
r. -uvo r F~ A 1 1 t ., o f rive r -ier,,-qe Is and trn ins i Urrq,.,l inero so t I
I
rvchn,-kh ounov i on-,itnvov. Vorkynt 'Arrfxnsj,,().-~o 1965. 11.5 1).
(YIRA IPt9)

ACC "o-or-raph R/
Ui
Isaneuverability_9f -r-iver-boat3l and cargo carriers (Upravlyaycmoat'
-sudov i no3tavov) Moscow, Izd-vo "Transport",, 1965.
145 P, illu3,0 biblio, Errata slip inserted. 2000 copies printed,
TOPIC TAG': iniand waterway transportation, navigation equipment,
ship naviration.
PIMP003-13 AND COVERAGE: This book is intended for on-InecrIn:,, and
o'.-heis shippln_,, personnel, and profe:isors and students in schools of
hi,.7her education. The book deals with the fundamentals of river-
,J
vensel navigation, such a3 with maneuverability, effects of currentb,
parnmetero of Cyroccopic turn-rate indicators, and
f.-yrosco,pic nutomatic pliots, and navJ-,IatIon. SImple devices for
dotei,iiinlngr the ttirn rate and drift anfole, nnd recording the txwning1
c-Ircle are discussed. The author made"an extensive use of the
results of experimentation conducted on Siberian waterwaye, No
personalities aro mentioned,
TABLE OF CONMENTS [abridged]:

ACC NRijjj'G000587
C11.1. 1-lanouverability of river Vessels and Barge Trains -- 4
Ch. 11. Relation between the Overall Dimensions of Pusher Barge Trains
and tho,3e o"L' tho Watemay -- 35
Ch.111. Effect of Plank Currents on Barge Trains -- 53
Ch.IV, Maneuverability of Barge Trains; Visibility Conditions -- 66
Ch.V, Gyroscopic Turn-Rate Indicator -- 78
Ch.V1. Automatic Pilot for River Vessels -- 102
Ch.V�X. Maneuverability of Asyanetric Barge Trains -- 122
SUB CODE: 17) 07/ SUBM DATM 02Jun65/ ORIO REF1 041
Card 2/2 ----- --

ST C " HL", f L , -. .
UsIng nomograms for the synthesir cf fc-ir-bar II.-Jrfiges.
m
loor. mash. i mekh. nc-103/104i2f,36 li-w..
( , 11 ~.A 'A ` . ~- . ~.

L 11127-66 EWT(m)/T r)J
r_Ae'~Nl ~sjj_5_02214_0_ SOURCE CODE: UR/0310/65/000/009/0030/0032
'_ I/ ~.(
AUTHORt St xhov,, V. (Senior rese&rch associate)
ORG:_N1lV 11-/~
TIM: Criteria for determining time for diesel lubricating- oil change
SOURCE: Rechnoy transport, no. 8, 1965, 30-32
TOPIC TAGS: lubricating oil, lubricant viscosity, lubricant property
ABSTRACT: A new method--developed by the Scientific Research Institute of Water
Transport--for evaluating the quality of diesel lubricating oil is proposed. The
method provides for determining water content, mechanical and sludge deposits and vis-
cosity of used lubricating oil. The maximum acceptable water content In used diesel
lubricating oil Is set at 2%. The limit of acceptable oil contamination with mecha-
nical and sludge deposits to defined in terms of an oil spot diameter on standard
filtering paper. Viscosity Is expressed an the relative time It takes an air bubble
to pass through a standard tube filled with used diesel lubricating oil (based on the
time required for such a passage through a fresh oil sample). The lWts of oil vis-
cosity deviation are set at 20% to +25% with respect to the viscosity of a fresh die-
sel lubricating oil. Orig. art. hasi 5 figures, 3 tables.
SUB CODE: l1/ SUBM DATEt 00/ ORIG REF: 003/
UDC: 521.8921621.435.0011
Card 1/1

STOROZM, V.
11conomic union between town and country In the people's donocracies
("Xconotic alliance of the working class and the farmers In the people's
ienocracies of larop*Q by T.N. Starodubrovskata. Reviewed by V.Storothey).
(MIRA 13,
Top. okon. no.3:63-67 Mr 160. .2)
Okirope. lastern--Agriculture)
(Stsrodubrovskala, T.N.)

STUR041mv, T..
Land rent and rent relations In the people's democraclese Tops skono
no.12:111-120 D 160. (X1U 13:12)
(Europe, lastern-Rent (Economic theory))
(Europe, lastern-Agriculture, Cooperative)

AC C IN R
, 6j
j_ V. Goleahchikhin, Yu.
AU' 11 OR idstorozh~ev
011Gi N11W
TITLE: Some operating problems of M-50 cUccel enginea
SOURCE: Rechnoy transport, no. 8, 1966, 29-30
-LC-?!C TAGS: diesel engine, marine engine, engine cylinder, cavitation, corrosion/
/V/.S() offsr4 e_Ajoooc
ABSTRACT: Investigaticno carried out on Vjiketn-ty-pe vessels operated on the Gb'
Rivcrhaa revealed that nearly 50% of their out-of-service time wan due to defects
in the cylinuler sleeveg of their M-50 diesel engines. Generally, the sleeves
cracked at up to 3-= pitting depths and the cracks were located at 45-degree.angles
to -the craniDhaft. Fatigue tents led to the conclusion that the pitting was no'. a
result or corrosion and that the cracks were not due to excessive stresses. It was
found that pitting arises on a bushing's side independent of its position relative
Zo the cooling-water feed line, it occurred during the pgver strcke (see Fig. 1) and
Card 1/3 uDc: 621.436.004

F---7
ACC "RI
100
Fig. 1. Diagram of forces and cavitation
damage on sleeves
1 and 3 - -Cayitational wear along the line d
the cooling-vater outlet; 2 - cavitational
wear in the plane normal'to the cranUbaft.
mostly showed a cavitational character. Cavitation takes place as a result of the
high-frequency oscillation of,the sleeve due to the normal component N of the forc*

ACC NRi
acting during the engine's power stroke. Observations revealed that bright, chrome-,
plated bushings',,',better resisted cavitation damage than did ~admlu*-plated bushings
of a dul-1-y-e-11--ow color. Orig. art. has: 2 figures and I table. ((z
SUB CODE: 13, 21/ SUBM DATE: none

-- i, ul-
VAISILITSGIV, V.D.; YA G*K,,,',~',C`,'l(;E, ~i Li --im.
MUM, Ye.I.,, lU;'0VUOVq Ya.A., kara. eiror, nnul.; 1,~A'AVIY---V3'1:AlAP
E.D.; CIMIsIK, I.P., kand. akon. rAuk; '~-MTW~--ILAYA,
SKVO-TXVA, A.I.; ~X)4(,UVA, li,V.; =11MOVA, I.A.;
IRIGUZKO, Y.Ye.; Yu.V.; Jilk~'J"NILA, ';.I.; ItAT.,
0 kand. lator. rviuk, i-6d.; L,1T',,:.l"ll'l;Af Ye., ed.;
J jfj !
M
G.1 tekhn. md.
[EconorV of the poo-de's domoci,acies In 'Aguran for 19601 Skono-
lka stran sol-sialiotichorkogo laveria v tqifralh 1960 g. NA
red. 1G.B.Gertsovicla, l.r.Cloinika, V.1.0toro-Ami. 1'0!;Iv,-i, tzd-
vo votnial'no-okm. lit-r-j, 196L 231", p. 15:4)
(Comini:A count r I ca - -Ec ono-.Ac cor.ditions)

U8=10,-Marina Ajoksand-roma; ;.I., otv. red.;
GERTSOVICH, G.V., red. izd-va; YEOGOVA, 1;-F-, tekhn. red.
(Developing
sticheskol
1962. 214
the socialist econoU7 of Hungary)
ekormomiki Vengrii. V4skYap Izd-vo
p. Olungary-Econor4c conditions)
Ra2vitie sotsiali-
Akad,nauk &SM,
WRA 15:4)

G. M. ; OLEYNIK, I. P. , doktor ekon. nauk, i%YAb1j.'JHKIN, T. V.
doktor ekon. nauk; DUDINSKIT, I.V., knnd. ekon. naukj
MIFCSHNICHENKO, B.P.t kand. ekon.nauk; SEPdEYEV, V.P.,Jand.
ekon. naukj TARNGVSKIY, 0.1., kand. ekon. nauk; STOFOZUV, V.I.,
kand. ist. nauk; KONOVALOV, Ye.A., kand. ekcn. nauk; GERTSOVICH,
G.B., kand. skon. nauk; POFOV, K,I., kand. ekon. nauk, red.,4
ZEVIIN, L.Z., red.; NIKCLA'F6V, D.N., rs,-J~; PAK, G.V,, red.;
GERASIMOVA, Ye.S., tekhr.. red.
(The building of communism In the U.S.S,R. and cooperation among
the socialist eountrieslStroitel'stvo koTmunizza v SSSR i sotrud-
nichestvo sotsialistichaskikh stran. Pod obahchei red. G.M.Soro-
kina. Moskva, Zkonomizdat, 1962. 334 P. (MIRA 16:2)
1. Akademiya nauk =R. Institut ekonoziki mirovoy sotsiallatiche-
skoy sistemy. 2. Chlen-korrespondent Akademil nauk SSSR (for
Sorokin).
(Communist countries--Foreign economic relations)