POT/OPERATIONAL TAPES - MISCELLANEOUS

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP94T00858R000601220001-8
• Release Decision: RIPPUB
• Original Classification: K
• Document Page Count: 28
• Document Creation Date: December 28, 2016
• Document Release Date: April 8, 2008
• Sequence Number: 1
• Publication Date: April 13, 1983
• Content Type: MISC

Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
TABLE OF CONTENTS - ESD MANUAL
G.(oss,gRy ,
POT Tapes/Backup and Recovery
t
Normal Run Data Flow Chart
Daily Schedule
Normal Sequential Program Operation Overview
ESD, Function and Purpose
MPFGEN, Function and Purpose
Rtgwesr 01:16K RErRR.+sA+~s~aa
PREDICT11, Function and Purpose
ASSIGNII, Function and Purpose
RETASG, Restart for Predict/Assign Listings, Error Messages
CAMS, Function and Purpose, Error Messages
BINLOC,"Function and Purpose
PASS11494 Procedure
OPS Officer Conflicts
Itemsifor Duty Officer
PRob e,l*,Vedc / h42 a ,~a mast s
,--rI ...._? Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8 = -- I P
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
GLOSSARY"'
CAT
CE
CI4S
CPAT
Conserv-a-trieve
Current Exploitation
Communications Management System
Collection, Planning, and'Targeting.
CPC Computer Program Component
CPCI-- Computer Program Configuration
CTF Conserv-a-trieve File
DMR .`Data Management Routine
D~iS Data Management System
E/ xpio Ldi.iraci I .:.,r
ESD Exploitation Support Data
FAL? ..File/Activity Log
I/S Imaging Satellite
MPF Mission Parameters File
NDS NPIC Data System
,.,.0/F Operations Facility
PAS Prediction/Assignment/Status Data
PASF Prediction/Assignment/Status File
PE
Preliminary' Exploitation
PF . Prediction File
PI Photo Interpreter
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
PIF PI On-Duty/Skills File
PLF Packet Location File
RSI Remote Symbiont Interface
SCF Spot Cable File
T/C Terrestrial Communications
TIP Transaction Interface Package
TPDF Temporary Prediction Data File
XAU Applications Support Utilities CPCI
XCH Communication Handling CPCI
XES Exploitation Support CPCI
XMN Mensuration CPCI
XMS Exploitation Management Support CPCI
PFF Page Format File
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
POT/OPERATIONAL TAPES - MISCELLANEOUS
TYPE
#REELS
LOCATION
Highlite
1
Hilite MRN/SSN
Library
(SPOT) Cable
Summary Cable
3 Times a
Day
1
Mission #
Cable #
Summary MRN/SSN
Library
(PEG)
Special
Twice a
Day
1
Mission #
Cable #
Special Summary
Library
Summary Cable
CPAT
1, Retrans-
MRN/SSN Mission #
Cable #
CPAT Feedback
1 Day
Li brary
mission Only MRN/SSN Time
CAMS Photo
CAMS Photo
1 Day
Library
Reference
Site System
Reference MRN/SSN
Library
Engineering
(KGSSE)
MPF Tape
1 Reel Per
YMPF IS/PASS REV Time 6000
Library
Pass
CAMS PREDICT
1, Retrans- CAMS PRED LIST MRN/SSN 6000
1 Day
Library
mission Only IS/PASS/REV Time
EEI (1110
EEI File for CAMS Time 6000
2 Cycles
Library
ONLY) Per
CAMS Request
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
POT/OPERATIONAL TAPES - MISCELLANEOUS (Continued)
TYPE
#REELS
LABEL -
SERIES
LOCATION
SOAK (Both
1
RPT 76 Mission #
1110-6000
Library
494 & 1110)
Cable # (PEG for 1110)
494-0-2999
COAK (Both
1, If pro-
(IEG for 494)
COAK Mission #, Cable #
1110-6000
1 Cycle
Library
494 & 1110)
duced
(PEG for 1110)
494-0-2999
BOAK
1
(IEG for 494)
BOAK Mission #, Cable #
1110-6000
1 Cycle
Library
(PEG for 1110)
494-0-2999
Microfiche
1
(IEG for 494)
Micro Mission #, Cable #
1110-6000
1 Cycle
Library
(Both 1110 &
(PEG for 1110)
494-0-2999
494)
(IEG for 494)
Plot Tapes
1
Plot IS/PASS
6000
Scratch After
PAS Archive
2
Mission #, Date
Already Labled
6322, 6301
Plotting
1110 Room
CRF Archive
2
Already Labled
6233, 6336
1110 Room
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
POT/OPERATIONAL TAPES - BACKUP & RECOVERY
TYPE
#REELS
Audit Trail
3-4
Operational Audit 6000
1 Cycle
Tape
Weekly Data
Per Day
22 Per
Trail Time:
Operational Data 6000
4 Cycles
Library
Base Secure
Daily Data
Week
10 Per
Base Weekly Generations
(DBSTON) TIME: in Library
Operational Data 5000-5050
4 Cycles
1110 Room
Base
PFF Save
Day
1 Per Day
Base Daily (Daily (Old Contingency
DMP N) TIME: Tapes)
Daily PFF Time 6478,6045,6170
3 Cycles
1110 Room
Weekly Secure
6
Secure Save All 6000-6099
3 Cycles
1110 Room
Daily Secure
3
Operational Time:
Secure Daily Time: 6000-6099
3 Cycles
1110 Room
Rolout
-
Rolout Operational 6000-6099
Until Inactive
1110 Room
Backup Master
1 Per Day
Backup Master Operational 6000
7 Cycles
1110 Room
1 Per Day
LIBSAVE Operational Time: 6000
3 Cycles
1110 Room
TSS File
1
TSS File Operational 6000
3 Cycles
1110 Room
Account File
Time:
Account File 6000
3 Cycles
1110 Room
Operational Time:
Approved For Release 2008/04/08: CIA-RDP94TOO858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
POT/OPERATIONAL TAPES - DUAL IDF PROCESSING
TYPE
#REELS
LABEL
SERIES
RETENTION
DISPERSION
494 Generated
1
RPT 75 Cable #
0-2999
3 Months
Library
Cable (IEG)
MSN #
Intersystem
1-2
I/P INTERUPD Time
6000
7 Cycles
Library
Maintenance
TIF T
ape
1110 SAC Out-
1
SAC RPT 75 Cable #
6000
3 Months
Library
put Tape
MSN #
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
'."'7'Y`,;f';YPa'~tT?2????.:"'pia?''r..`7~LF,i'?3?R?.~a?,re?{}?r,;~ao!n+~~.?^,, -t~,r?K ~?-- ,atr s
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
1110 OPERATIONS SCHEDULE -- (1800 - 0600)
(1730)
--
1.
After release of 1700 highlight and after HDCOPY of 2100
summary, ST POT*CONT.CHISTPAS,,,DMS/DMS (PAS Archival)
(1830)
--
2.
After PAS Archival (#1), you may process ESDs as received.
(0815)
--
3.
Initiate KGSSE job: modify card deck and load card deck:
IERRUN
(2115)
--
4.
After release of 2100 Summary Cable, initiate external update
(if IEG releases cable), and clean up USF (during training
period 1 Aug - 15 Sept).
EXT-UPD. - USE CARD DECK
ST POT*CONT.DMPUSF,,,DMS/DMS
(2145)
--
5.
After Summary Cable and external update (#3), initiate inter-
system maintenance:
ST XAU*SYM.RUNSTRM,,,DMS/DMS
(2215)
--
6.
(Sunday - Friday) After inter-system maintenance (#4) FINs,
start daily DMS TIPOUT and PFF save:
ST NDS*RECOVERY.DAILY-OUT-P ,,,DMS/DMS
ST DBS*DATA-PROD-LD.PFFTIPOUT,,,DMS/DMS
NOTE: Do not hold ESDs or users.
(2215)
--
7.
(Saturday) After inter-system maintenance (#4) FINs, initiate
weekly DMS TIPOUT.
ST NDS*RECOVERY.WEEKLY-OUT-P ,,,DMS/DMS
NOTE: Hold ESDs and inform OPs Officer that Data Base
will be locked out for about 1-1/2 hours.
NOTE: If WEEKLY cannot be started before 2300, hold
until Sunday, but do daily TIPOUT instead.
(2345) -- 8. Allow ESDs if held by WEEKLY DMS TIPOUT.
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
1110 OPERATIONS SCHEDULE -- (1800 - 0600) (Continued)
(0000-
0400) -- 9 . Between ESDs during the hours 0000 - 0400, i n i t i a t e
three Data Base maintenance runs.
MPF Purge : ST XAU*CNAK.CPURGEMPF,,,UNIVAC/UNIVAC
CRF Archival: ST XAU*CNAK.CHISTCRF,,,DMS/DMS
FAL Purge : ST POT*CONT.PURGE/FAL,,,DMS/DMS
(0545) -- 10. CPAT Feedback runs.
(1800 -- 11. Every three hours allow CAMs Photo Reference to run.
2100 If not in backlog:
2400
0300 ST XES*DIANE. ,,,DMS/DMS
06001
otoo
iJLoo
/S-00)
j Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
r t
1100 OPERATIONS SCHEDULE -- (0600-1800)
1.
Process ESDs as received.
(C)
ce4T
(0800)
--
2.
IEG training begins (through 1600)
(0845)
--
3.
CPAT Feedback runs.
(0900)
--
4.
Morning Highlight runs.
(1100)
--
5.
Morning Summary runs.
(1200)
--
6.
Noon Highlight runs.
(1630)
--
7.
CPAT Feedback runs.
(1700)
--
8.
Evening Highlight runs.
9.
Start PAS Archival after 1700 Highlight transmitted and after
HDCOPY of 2100 Summary taken.
ST POT*CONT.CHISTPAS,,,DMS/DMS
10.
Every three hours allow CAMs Photo Reference to run. If
not in backlog,
ST XES*DIANE.CAM,,,DMS/DMS
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
NORMAL SEQUENTIAL PROGRAM OPERATION OVERVIEW:
In normal operation an Exploitation Support Data (ESD) Transmission
is received from Ground Communications (GC). The receipt of an ESD
message will be announced by the message "DTXO1 will FIN and "Rsspp" will
start; where ss is the satellite number and pp is the PAS number. Rsspp
will start the Computer Program Configurations (CPC's), or programs, MPFGEN,
PREDICT11, ASSIGN11, CAMS, and BINLOC in series. After the CPC's have run
to normal completion, the message, "Rsspp Normal Termination" will appear
on the console. "Rsspp*" will precede all the normal console messages for
each CPC.
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
ESD, FUNCTION AND PURPOSE
The ESD shall be transmitted from the Operations Facility (0/F)
through the 9480 at G/C, to the Univac 1110 at The ESD STAT
will be used to produce a comprehensive target acquisition list, identify
targets that require confirmation feedback to Collection, Planning, and
Targeting (CPAT), locate targets within images, and assign preliminary
exploitation responsibility to individual PI's. The transmission of ESD
and CPAT data is the primary function of the DLT 310 Enhancement which
resides in the C/SP as part of the IPL software. The following console
message applys:
"DLT001*RECYC OUT-NO RESP" - The U-1110's C/SP software is attempting
to establish communications with G/C. Acknowledge for STAT
RECYCLE BLOCK is not being received.
STAT
OPERATION ACTION - Contact G/C OPS, orb to
verify operational status of DLT communication line
(SCM210 CHNL 21). If their end is good, contact
NPIC/COMMO
RECYCLE - Operator may initiate a recycle if requested by
G/C 0 Simply DN 7/8 and UP 7/8 for transmission STAT
of recycle.
NOTE: If G/C resets the SSN numbers back DLBOOO, ST POT*CONT.DELETE-
DLB,,,DMS/DMS
j Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
. "DLTOO1*RECYC-ACK'D"-
"DLTOO1*RECYC-REC'D-
T/C acknowledged the U1110 C/SP's RECYCLE, and we received
and acknowledged RECYCLE. This path is ready to send and
receive CPAT and ESD traffic.
3. "DTXLLLSTART" - ESD message received from the 0/F
"DTXLLLFIN" - ESD message successfully received from the
0/F, if no error message apperas between
START and FIN.
NOTE: DTX = Data Transmission
LLL = Last three positions of Sysgen'd Data Line Ter-.
. minal line ID (i.e., DLT 001 ~
The DTX message is in the file name XCH*DLNSSS.
SSS = Is the unique message station serial number.
N = The last letter of the originators routing indicator
(i.e., RUXFFA = T/C, RUXFFB = 0/F
DL = Constant within C/SP software.
1 7/7 - RMSU03, 9300
7/8 - DLT0O1, 9480
7/9 - DLT0O2, Datex HDQTS.
'S 2V4s?'t, 0t'3uc Gu%,0 a .JPi
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
STAT
STAT
STAT
STAT
STAT
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
REQUEST FOR RETRANSMISSION
When it is necessary to get a retransmission of a message from
the following procedure is to be followed:
1. Inform the Op's Officer of the requested retransmission.
2. Call GC and tell them you are requesting a retransmission.
a. Give only the last 4 positions of the original messages
station serial number, i.e., DLB024 - Request B024 be
retransmitted.
b. The date and time of the original message may help GC
locate the message.
3. Log retransmission as such.
STAT
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
MPFGEN, FUNCTION AND PURPOSE:
The MPF Generation CPC is the first program to be executed upon
receipt of an ESD. MPFGEN does the processing necessary to generate
three principal outputs: (1) The Mission Parameters File (MPF) stored
in the NPIC Data System (NDS) Data Base, (2) the MPF written to tape,
and used as input for the 494 MPF maintenance CPC, and (3) the Temporary
Prediction Data File (TPDF) to be used 'as input by the PREDICT11 CPC.
Console Messages:
MPFGEN REQUESTS A 7-TRACK TAPE FOR 494 MPF - Operator action
self explanatory.
PLEASE UP A 7-TRACK DRIVE IF NONE ARE UP NOW - Operator action
self explanatory.
494 TAPE HAS BEEN WRITTEN - No operator action required.
HAND-CARRY TAPE TO 494 ROOM - Operator action self explanatory.
MPFGEN NORMAL EXIT - No operator action required.
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
PREDICT11, FUNCTION AND PURPOSE:
The PREDICT11 task predicts target position in the PI reference
system updates the Prediction/Assignment/Status STAT
Data (PAS) File of the NDS data base with target position and related
target header information on a pass-by-pass basis, sends predict lists
back t creates the "PRDFIL" File, and inputs to the ASSIGN11
task.
PREDICT11 runs under the Data Management Systems (DMS). Console
indications of normal execution, as well as error codes, can be found
in the operators reference manual for DMS.
PREDICT11 normal console indications are:
PREDICT11 Task Initiation
PREDICT11 Task Normal Termination
PREDICT11 sends all error messages to the 1110 printer and all CPAT
error messages and/or fatal error messages to the 9300 printer at the Site.
If Assign errors and cannot be completed -
RETASG can be run to get the areas Predict/Assign listing. Use as last
resort only.
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 I
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
ASSIGN11, FUNCTION AND PURPOSE:
The ASSIGN11 program assigns predicted targets (if they are to be
exploited) and predicted images to PI's and sends back assign lists to
STAT
Preliminary Exploitation (PE) targets and images are assigned to
on duty PI's with the required skill.
Current Exploitation (CE) targets and images to be exploited at
the Exploitation Facility (E/F) are assigned to PI's in the proper
component with the required skill.
There are Start and Finish messages on the console.
The ASSIGN11 program creates the "ASGFIL" File input to the CAMS
and BINLOC task, as well as TGT-RCRD's for the CTF.
The PREDICT/ASSIGN listing produced by ASSIGN11 will be printed
at both the 1110 printer and the 9300 printer at the Site.
ASSIGNII normal console indications are:
"ASSIGNII Execution Started"
"ASSIGNII Normal Termination"
i Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8 i I
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
PROGRAM RETASG
PURPOSE: The purpose of this program is to recreate the PREDICT/
ASSIGN list.
PROGRAMMER: P/A Team
CAPABILITIES: 'RETASG' is capable of generating a PREDICT/ASSIGN list
STAT
for any IS and PASS. Optionally, a summary PREDICT/ASSIGN
listing of all IS and PASS's for a mission may be requested.
Two listings will be generated for each type. One will be
transmitted t and the other to the E/F. 'RETASG' STAT
does not update the data base.
USE: 'RETASG' solicits input from the system console. The inputs
are:
(1) IS # (i.e., "O1")
(2) PASS # (i.e., "05")
(3) MISSION # 55YYDDD
where: 55 = Constant
YY = Year
DDD = Julian Date
An IS and PASS of zero (0) will indicate that a summary
listing for the whole mission is desired.
'RETASG' can be initiated from the system console with
the following input: ST POT*CONT.RETASG,,,DMS/DMS
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
CAMS
Function and Purpose
The CAMS Predict List Task is a batch program which sends a list of
predicted targets to the COMIREX Automated Management System (CAMS) at
CIA Headquarters.
The output from this program is a list of images and of predicted
targets for each pass, formatted for machine processing by the 25X1
CAMS computer. copy of the list is printed on the system printer in
the printout of the XMS runstream.
There are Start and Finish messages on the console. If a Start
message is produced but no Finish message and no error message appears
and BINLOC starts, CAMS has determined that the predict list was previ-
ously generated and has exited.
A tape is produced containing a backup copy of the message. The
program will output the message PLEASE MOUNT BACKUP TAPE. If no 9-track
tape drive is in an UP state, the operator must UP one via a key-in
before CAMS will proceed. Scratch tape and cards for the time being.
At the conclusion of CAMS execution, a message may be output:
NUMBER OF BAD COMIREX INDICES = NNNN
This indicates that one or more targets have badly structured COMIREX
indexes. However, the CAMS program has executed properly unless other
error messages appear. Do not restart the XMS runstream. No action
need be taken unless the Data Base Administrator has requested that
this problem be reported to him for analysis.
Note: Log all messages in Operations Log.
Note that CAMS sends output to DLTO02. When DATEX receives it, it
will acknowledge it with a run started on the 1110 called DTX02. DTX02
will START and FIN with no error message. The SSN number and message
reference number.(needed for Recams) are displayed on the console at run
time.
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8 ; F
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
CAMS ERROR MESSAGES
CONSOLE MESSAGE
Header Could Not Be Read
Initialization Failed
.Image-Count Error
r
Pi
xj
si
yy'
Target-Count Error
Termination Routine
Failed
Error Accessing PAS
File."
EXPLANATION
A DMS error occurred
reading the CAMS header
from the CHF in the Data
Base
1. DMS-.problems imparting
or opening data base.
DMR or TIMER is pro-
bably down.
. Probable DMS error reading
or updating FAL in Data
Base.
2. Possible hardware problem.
The number of images in the PAS
file does not match the count
generated by ASSIGN-11 -- Data
Base may be invalid, However,
a predict 1 ; :-w;
CAMS.
The number of targets in the PAS
file does not match the number
stored by PREDICT-11 -- Data
Base may be invalid, However,
a predict list was sent to
CAMS,
A DMS'error occurred in the
termination of CAMS,
A DMS error occurred reading
from the PAS file to the Data
Base.
Call Data Base Rep,
1. Restart DMR/TIMEI
2;' If this does not
correct the probl
call Data Base RE
Call Data Base Rep.
1.
2.
Call Data Base RE
Do not restart Xt
runstream.
3. Call CAMS and wa;
+1;e3n, +h:,+ Vv-nA;,.4
v
List nlayie bad.
1. Call Data Base RE
2. Do not restart X1
runstream,
3. Call CAMS and wa:
them that Predict
List may be bad.
Call Data Base Rep. ;
Call.Data Base Rep'.
%i,'r3!R?~"''PR :"~ir~!;S4.TT~'.^.~~Sr-~r~cR'.^~S!tRt;+^RzF'+:T-'4fY ~ iw,p'I^~'r!;-;n-?. WTwJ!' ..t-il?*'"?,. \.~-: ,'t?;;;;",~!s'!P v^
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
RTNIOC. FUNCTION AND PURPOSE :
?'~ ~:.:.. ? :i': ~a?'?' .l;: l'. .T~ `Y-/. -'.i ~~~. ~',~~?d~'y, -~ ~ X ~ +. t:; ?;%/:?? lC,!'~..rh'~~ t.: ri,.'~ '~
.ti .~. .i?%t, .?f'F.?f`!J [~~ `'~...f .~w:_.~=ty .? _'%.~.. .i+. ?,.A~~~"?~S`.'.?Y, ''.''?L:'i; ti:?: t.v..'r.ct't;~'~- ;;w.S, l:~? :?~?f+
The?BIN Location and PI Assignment Task (BINLOC) is a TIP Off-Line
This task will require target MRN and associated image and assign-
Batch. program initiated by an XMS' Runstream. It will be executed on a
pass-by-pass basis, throughout the imaging day, as soon as assignments
for a given pass have been made to the "PAS" file by the Target
Prediction and Assignment Function.
ment data for all PI, CE, and active COMIREX targets. Note, theTGT-
RCRD's must be in XPRI/MRN order. It will generate "VIRK-PACK" records
rnmcEQU_a_-rQtr -F (CTF) file for the target folders to be retrieved.
?BINLOC will produce two printed reports of the target folders to be
.-retrieved from the CONSERV-A-TRIEVE (CAT) on the 9300 printer at the
E/F. The "Remote" subroutine will be used to send the two reports to
the E/F printer. These reports will contain separate lists of the
folders which are currently in and currently out of the CONSERV-A-TRIEVE
Control. The reports Will be used by the Intelligence Assistant to
direct manual retrievals in the event of loss of computer support and
will allow the Assistant to find and retrieve those folders already in
the Exploitation Environment.
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
BINLOC will give no start instruction but will term with the message:
"NORMAL TERMINATION OF BINLOC"
followed by:
Rsspp*MSG: Runstream RUNXMSsspp normal and Rsspp FIN.
S4 r+
Xnns is c-ckT. ?rJA- E-RRj)12
1115 fuhACCQvk Will C,6 !1C- l-!
~NI~C .4101Ai 'kO oh 0~4 Vtv5ioq
*Ala? ~k% Always Worktd k)?
dos.- , .nod uealc
~V%%Sl,ts ( ,+ sl~0AJ
rI Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 correct pass and date was input.
..:.output and notify Data Base personnel.
same results, there could be a data base problem. Save all the
Run the program again. If the input is correct and you receive the
"NO IMAGE-ID FOR PASS PPYYDDD".
"DMS ERROR TRYING TO FETCH TGT-LOC-STAT FOR THIS IMAGE-ID".
"NO TGT-ID FOR THE FOLLOWING IMAGE-ID AND TGT-LOC-STAT".
"NO TGT-LOC-STAT FOR THE FOLLOWING IMAGE-ID".
Errors 2 through 5 are all data base problems and are printed'.
on the on-line printer. Save all output for Data Base personnel
to examine.
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
,Error Procedures
Check your input with the error message and make certain that the
"NO PAS INDEX FOR PAS PPYYDDD" or "NO INDEX RECORD FOR PAS PPYYDD."
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
OPERATING PROCEDURES FOR "PARSONS"
1. Run after each ESD run is completed.
2. You will need a 7-track drive.
3. Start the program from the console.
ST POT*CONT.RUNPASS11x?DMS/DMS
4. Mount the tape per instructions.
5. Console message will appear next.
"ENTER PASS/DATE FROM LAST ESD..."
"ENTER PPYYDDD"
6. You will enter data as in the following example:
EX., 0277111
7. The first two characters -02- are the Pass received via ESD. The
third and fourth characters are the Year. The last three characters
are the Julian Data during which the mission started. For example:
When setting the Julian Date, schedule for the Julian Date
will be one (1) more than the actual Julian Date of the
first pass (01).
The Julian Date will be the date when the mission ENDS
rather than the date when the mission begins.
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
OSG Duty
STAT
1. Each day at 10 p.m. and 7 a.m. make sure U-1110 is at MAX configuration
if equipment is not down.
2: Keep abreast of Delta Problems (sign on yourself if necessary); try
to get terminals upper your knowledge... keep count of "terminals
out" twice/day and feed back to OC/OSG & .coordinate 25X1
3. Keep abreast of Inforex printer status.
4' On Delta Problems try to cVdi nate your activities wi tFE:]Delta STAT
Tech person on duty.
5. If you believe Delta repair man should be in to keep our Delta 25X1
reliability acceptable, contact and between you make the 25X1
decision.
6. Attempt to run PLOT.
7. Call into= to CH/OSG each a.m. at around 0300 and give each situatio;STAT
status---if CH not available, dictate to Secretary.
a. Computer Configuration; lxl, 2xl, etc.
b. Terminal Status (multiterm); number of terminals down.
c. Inforex Status; number of printers down.
d. 9300 Status
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
STAT
Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
 Approved For Release 2008/04/08: CIA-RDP94T00858R000601220001-8
OPS OFFICER CONFLICTS:
If you are having trouble with ops officer, and a mutual
compromise cannot be achieved, do no ue - request him to call Mr.
home phone
Executive software - Call
Other problems - Call
STAT
STATAT
STAT
Approved For Release 2008/04/08: CIA-RDP94TOO858R000601220001-8