SCIENTIFIC ABSTRACT KIM, G.V. - KIM, M.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000722520020-1
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: June 14, 2000
• Sequence Number: 20
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

KIM, G. V., Cand Tech Sai -- "On the vacuum distillation of
certain semi-products of lead-zinc manufacture." Alma-Ata,
1961* (Min of Higher and Sea Spec Ed KSSR* Kazakh Polyteoh
Inst) (KL, B-61, 244)
- 243 -

S/137/61/000/011/001/123
A06O/A1O1
AUTHORS; Kim$ 0. V., Ponomarev, V. D., Abdeyev, M, A., Kvyatkovskiy, A. N.
TITLEi Determination of the t-enmdynamlo oharnotorlottoti or zinc in Lho
zihc-lead system at low concentrations
PERIODICAL: Referativnyy zhurnal, Metallurgiya, no. 11, 1961, 3, abstract 11A21
("KazSSR Fylym Akad. khabarlary, Izv. AN KazSSR. Ser. metallurgii,
obogashcheniya i ogneuporov", 1961, no. 1 (10), 20-25 (Kazakh.
summary)
TEXT: The activity of Zn in Zn-Pb alloys was determined by the method of
measuring the e.m.f. of concentration circuits of the type: Mri, electrolyte,
Zn2+1 Zn + Pb+. A mixture of chlorides of K, Na, Li, and Zn was used as the
electrolite. Alloys with Zn content: 0.01; 0.05; 0.1; 0.3; 0.5% were
investigated. It was established that the activity isotherms (between 500 and
8000C) have a sharply expressed positive deviation from the law of ideal mixtures.
The entropy of the mixture and the partial enthalpy remain without change between
the limits of _900-8000C for one and the same alloy. They depend only upon the
alloy composition. The formation of Zn-Pb alloys is accompanied by an endothermic
Card 1/2

3/13'1/61/000/011/001/123
Determination of the thermodynamic ... A060/A101
effect. A 11nonr dopetidonce in demonatrated betwoen tho logarithm of lint,tinl
pressure. of Zn vapor (In the Zn-Pb alloy) and the temperature. Tile positive
deviation from the law of Ideal solutions and the slight endathermic effect of
the mixture favor the distillation separation of Pb-Zn alloys.
T. Kolesnikova
[Abstracter's note: Complete translation]
Card 2/2

KM O*V*j ABDMMV,. M.A.; PONOMAREY, V.D.
Preesure of zinc and cadmium Vapor above their a.Uoye. ,Trudy
Alt.GMNII AN KazakbASSR U14&-55 161. MM 1W)
(Zinc-cadmium alloys-~bta.Uurgy) (Vapor pressure)

KIM, G.V.; Y!"DiTTET, V-q.
Cont Inuous zinc. rcnoval "; - - 1,-il-:.,i -,nfir):- Trudy Inst. met.
i All Kazakh. 893-5 1;-.l (1,11PA 1718)

KIMt G.V.; ABDRYEV, M.A.
- - --mmoklum~
Vipor pressure In the system copper - lead with a low con-
centration of lead. Zhur. neorg. khim. 8 no.6:1408-1421
A 163. (MIRA 1616)
(Lead-copper alloys) (vapor presmire)

YI~OYITP Et V.-,~ I ; TALT ~V, ; 'i~ .:,Is ".. ' ',
2 ~' - r(3'P,,V,2, f:-i, -1 r: ~~ ., -i -v - --, vi i! I., ,- Trucl.-~,
" y ~ ..,
.~i, t I , . vv) ' . iLrC,. A14 '-: - ~, I ' ' .~ . - I , , -,I)

KIM,, G.V.; KVYATKOVSKIY, A.N.; ABDEM, M.A.; GOLOVKO, V.V.
Vacuum treatment of blister copper. Trudy Alt. CNIII All Kazaldi SSR
14:86-89 163. (IIqRA 16:91
(Coppbr---,M*WIurgy) (Vacuu--i metallurgy)

M) G.V.; ABD"-*YEV, M.A.; MONASYPOVA, R.I.
Stabilization of metals in capper-cadmium sint-3r cede. TrAidy Alt.
GHNII Ali KRzahh. SSR 14:100-103 163. (MIJILA 16:9)
(Nonferrous metals-Motallurgy)

Klylr
I. rp~-opDrtls)o nf C,.i ij and Zh-r neorg,
kh'An. -0 no.51-o-.4`54-12r6 ll~y 1614:0i 411RA 18i6"
i

I ~. ~ I
.- i

t ;
I I -

XIM. I.A.
The problem of classifying upper Permian Ored beds" by maans of
ostracoida. Geol. abor. no.3:33-37 155. (MIJU 8:6)
(Volga Valley--Geology. Stratigraphic)

K IF, I I tv a Lukich B!-_E.;'J"UV , M. . , red.; N , I` . ~ red .
(Duvelopmunt. of the state budget in t tn) ?'Ln-.-~aLh ~
Hazvitie gosudarstvennogo bludzLeta knzLH',-Yo_;
Alma-Ata, lzd-vo "Kazakhstan," i ~>,) F .
k"AhA

~ KIM, L11ya laik~ch; ZHIZNEVSKIY, F., red.; KUZDIBAYEVA, A., tekhn.
red..
(Budget and developing the econmqr and culture of Kazakhstan)
Biudzhet i razvitie ekonomiki i kul'tury Kazakhstana. Alma-
Ata, Kazakhskoe gos.izd-vol 1961. L14 p. (MM 15:3.)
(Kazakhstan-Budget) (Kazakhstan-Econc-mic conditions)

DULOVA, V.I.; LBOUTIM. V.B.; KIK. I.N.
Strength of acids in cyclehexanone. Trudy SAGU no-134:69-73 158-
(Acids, Organic) (Cyclohexanol) (MIRA 12:4)

50) SOV/63-4-1-25/31
AUTHORS: Dulova, V.I., Kim2 I.N.
TITLE: On the Strength of Acids in Cyclohexanone (0 sile kislot v
tsiklogeksanone)
PERIODICAL: Khimicheskaya nauka i promyshlannosti, 1959, Vol 41 Nr ly
pp 134-135 (USSR)
ABSTRACT: The dissociation constants of several acids in cyclohexanone
are investigated here. The results are shown in Table 1. The
effect of cyclohexanone is similar to that of acetone and
cyclohexanol, but the differentiation effect of cyclohexanone
is somewhat lower (Table 3)-
There are 3 tables and 5 Soviet references.
ASSOCIATION: 3redneaziatskiy osudarstvennyy universitet (Central Asia
State University~
SUBMITTED: JulY 14, 1958
Card 1/1

KIMP I.N.
"-- Elea-tromechanical device for closing charging holes. Gidroliz.
i lesokhim. prom. 14-no..8tl9-2O 161. (MIRA 16:11)
1. Yangi-Yul'skiy gidroliznyy zavod.

L 09260-67
ACC Mt A?602_997_2_ SOURCE CODE-.-uR/6U37~6-/656-/61T/-Oi-66-/&-l~-6~
INVLNTORS: Dolmatov, V. Ya.; Kim, I. P.
ORG: none
TITLE; An acid-resistant material. Class 60, No. 184690 /announced by Central
Scientific Research and Design-Experimental Institute of IHdustrial Buildings and
Structures (Tsentralinyy nauchno-issledovatellskiy i proyaktno-eksperimentallrqy
institut provshlonnykh zdaniy i sooruzhoniy)7
SOURCE: Izobrot prom obraz tov zn, no. 15, 1966, 166
TOPIC TAGS: sodium compound, filler, zaid resisting material) aniline
ABSTRACT: This Author Certificate presents an acid-resistant material based on water
glass arA a mineral filler with an admixture of sodium fluorosilicate. To render this
material waterproof, it is mixed with Suryl alcohol taken in the amount of 3-10% by
weight of the water glass, and with a hardener such as aniline hydrochloride in the
amount of 0.45--1.5,49.
SUB CODE: 07/ SUBM DATE: 18Jan65
Card __1/1
666.

ACC NR: AP7000912 SOURCE CODE: UR/0138/66/000/012/0015 0 18
AUTHOR: Kim, 1. P.; Yegorov, Ye. V.; Gol'danskiy, V. I. Dogadkin, B. A.; Tarasova,
Z. N. -1 -, - I 0_ '. -- - ~ - -I... I
ORG: Moscow Institute of Fine Chemical Technology im. 1-1. V. Lomonosov (Moskovskiy
institut tonkoy khimicheskoy teklinologii); Institute of Chemical Physics AN SSSR
(Institut khimicheskoy fiziki AN SSSR); Scientific Research Institute of the Tire
Industry (Nauchno-issledovaLel'skiy institut shinnoy promyshlennosti)
TITLE: Radiation-induced vulcanization with 20-30 Mev electrons
SOURCE: Kauchuk i rezina, no. 12, 1966, 15-18
TOPIC TAGS: radiation induced vulcanization, fast electron, high energy electron,
irradiation vulcanizate, induced radioactivity
ABSTRACT: The radioactivity of rubbers, rubber mixtures, and their ingredients
irradiated with 20-30 Mev electrons has been Investigated. The study was under-
taken because 5-10 Mev electrons, currently used in radiation-induced vulcanizat.
penetrate only to a small depth (2-4 cm in a substance with a density of 1 g/CM3.)
and, therefore, are unsuitable for the vulcanization of large-si7.e products.
Theoretical analysis of the problem and experiments showed that:'l) the reactions
proceed under the effect of electromagnetic radiation generated as a result of
deceleration of fast electrons in the substance; 2) irradiation of rubbers, rubber
Card 11?
UDC: 678,028:66,085
mixtures, and their ingedients with fast, 20,30 .Mey electrons forims the radio-
0 5)
active isotopes C11A . and Zn63 na a result QR y, n-type photonuclear reactionsl
3) owing to the short halflife (minutes or tens of minutes) of these isotopes, the
radioactivity which is induced in the irradiated specimens decays in a Matt r o
hours; 4) rubbers, ruHvr mixtures, and their ingredients are not activated with
secondary netitrons; 5) the use of fast, 20-30 Mev electrons for the vulcanization
of lirge-si'ze rubber products presents no da ger for personnel, provided that the
irradiated products areheld in isolation fon one day. Orig. art. has: 2 figures
and 2 tables.
SUB CODE: SUBM DATE: l2jul65/ ORIG REF: 0051 OTH. REV: 002/ ATD PRESS: 5108
L.Card 212

INSULATION
"Experience In Preventive Tests of the High Voltage Insula-
tion of a Generator" by I. S. Kim, Elelctricheskllye Stantsii,
No - 5, May 1957, Pages
On the basis of experience with breakdowns of various high
voltage generators, the author recommends that generators be
tested for high voltage at voltages up to 2-1/2 times the
normal ac rating and foiAr times the normal dc rating. If
spare windings are available, It is recorl,mended to raise the
test voltage even higher, --nd thun eliminate (by breakdown)
the weak portions of the existing wLnding.
Card 1/1 14
XHODAVOVIGH, I.Ye.; Vz;FELOVA, N.V.; ODISRARIYA) G.F,.P. I-jjj-FAyFV V,A,;
GANCHVA, G.I,.,- M)A40.
Study of ragUA~arities of pressure change and gas movement along
a gas pipeline in unsteady flow. Trudy VIIIIGAZ no.13:3-26 161.
I (Gasi, Natural--PipelineB) (MIRA 14-12)

Kim, K. -
Important factor in the organization of mixed brigades in construc-
tion. Sote.trud 5 no.2:123-125 F *60. (MIRA 13:6)
1. llachallnik otdela truda i zarabotnoy platy Dallshakhtostroya.
(Construction industry-Production standards)

XIM, K. T.
Gra-lua-te ~tudlent, wrItten u t~ :' r t r,- 'e -r(!f-,> )!* Can il i-A~, ~~f Tf~r,!,nlcali -
Scicnce3 Jntit'-ed "Investigation ofTr,-m:-,ition Froces.,Ps of' tin Asyncl-ronoii- :'!ichir.(,.:;
at Ve Cbmigong Speed of tl~e Rotor." Kiyev, Ukrajnshy-a ssr.
Soviet Source: N: Pravda llkrzdn,~, Kiyev, 30 J.,in 51
"Tream.,.re InIzind", on filo ill Lfl~r,,iry oll'
ill IWAFt t
Air Information Dlvi3lon, Reprt No.-_25G%

KIM'K.I. -..~
A method of calculating transition processes In asynchronous
motors. Trudy Inst. energ. AN UzSSR no.?:88-96 153.
Ollectrie motors, Induction) OUMA 8:9)

KIM, 1. 1.
I-------
Kaxi-1- electromagnetic moment calculations for electric
motors under owing load conditions. Trudy Inst. energ.
AN UzSSR no.7:97-104 153- (KLRA 8:9)
(Illectric motors. Induction)

x1m, K. 1.
Effect of the degree of compensation In the intermediate
synchronous compensator-on dynamic stability of electric
transmission. Izv.AN X1r.SM no.6:57-64 158. (NIU 11:12)
(Electric pove'r dietribution)

KIM, K. 1.
Analyzing the effect of params"Gors of a iiyncbronous mchine on
the zone of ae3mchronous self -excitation. Trudy Inat.vod.khoz.i
energ. All Kir.SSR no-5:131-138 159. (14HIA 13:5)
(notary converters)

KIM, K.I., kand.telth.nauk
Overload capacity of an asynchronous motor with rotor
excitation and jolting load. Energ. i alektrotekh. prom.
no.2:42-47 AP-Je 162. (14M 15: 6)
1. Institut olektroteldufflkl AN USSR.
(Eleotric motors, Induction)

KIM, X.I., kand.tekhn.nauk
Comparative analysis of the effect of synchronous and asynchronous
compensators on the dynamic stability of an electric power transmission
system. Izv. vya. ucheb. zav.; energ. 6 no.5115-19 IV 163.
(baRA 16:7)
1. Institut elektrotekhniki AN UkrSSR.
(Electric power distribution)

KIMP K.I.
~ -1-- -
Suppression of the Hall effect In continuous media. Dop. AN URSR
no.8:1052-1054 163. (MIRA 16:10)
1. Institut elektrotekhniki AN UkrBSR. Predstavleno akademikom
AN UkrSSR K.K. Khrenovym
(Hall effecti

4'i
4,
t?4'
.7f .
It

i . I . . . ; II
. . . i
1 .1 . . - II .

. . I
. .. i

8/207/62/000/006/025/023
xl9l/z435
AUTHOR: -Kiin, K.K. (Novonibirsk)
TITLE: Contribution to the analysis of liquid and steam-liquid
ejectors
PE'RIODICAL; Zhurnal prikladnoy mekhaniki i teoreticheskoy fiziki,,,
no.6, t962, 134-137
TEXT: 'In most investigations devoted to the analysis of ejectors,'
cylindrical form of the mixing chamber forma part of the analysiSs
An analytical treatment of liquid and steam-liquid ejectors in
given with an arbitrary distribution of static pressures in the
mixing chamber. The problem in given a uni-dimensional treatmenth,
-In the analysis of an otberwise conventional ejector arrangement,
the friction forces are neglected. In the beginning of the mixing
chamber the velocity distributions across the driving and entrained
fluid sections aro assumed uniform. The length of the mixing
chamber is assumed large enough to ensure uniform velocity
distribution across its end section. The basic equations are set.i*
up and the task formulated to find a solution yielding the maximum
ejection coefficient. Treating the steam-liquid ejectorfirst, .
it is assumed that the steam issuing from the nozzle becomes fully
Card 1/2

/,,7/6,/ooo/00.6/025/025
Contribution to the tuinlysis E191/F-435
candensed inside Lhe mixing cliamber, that the density at the
mix3rig charyiber exit is equal to the density of the ejected liquid
and that the static pressure at the exit is equal to the pressure
in the space into which the ejector in discharging. The
relations between the velocities and the several design crose-
sections are obtained for the optimum ejoction coefficient under k1
various assumed conditions. In all-liquid ejectors It in assumed
+,hat the densities of the driving and entrained liquids are equalmd
that the static pressures of the two liquids are equal at the entry
to the mixing chamber. It is shown that the maximum value of
the ejection coefficient depends on the pressure drop and the
distribution of static pressures inside the mixing chamber. The
t4o types of ejectors are similar in principle. The shortcomings
of the uni-dimensional treatment are briefly mentioned.
There are 7 figures.
SUBMITTED: July 21, 1962
Card 2/2

KIN, K.N., inzh.
Automatic control of the TIcosity of concrete mixes during
the process of mixing. TrLdy NIIZHB no-33:29-40 164.
v (MIRA 18:2)
1. Nauchno-issladovatellskiy institut betona i zhelezobetona
Goestroya SSSR.

KIM, X.T. -
Method for lessening films on the surface of copper tubes and rods.
TSvet.met. 27 no-5:55-58 S-0 154. (MIRA 10:10)
(Pipe. Copper) (Sheet-metal vork)

18-5100 9- 1 C- 11/18
AUTHORS: '--kim K.T., Kornakov, D.Ye. and Safronov, N.V.
TITLE., A Method of Extruding Tubes with a Small Inside Diameter
PERIODICAL: Tsvetnyye inetally, 1959, Nr 10, pli 65-66 (USSR)
ABSTRACT: Until recently, tube stock has been extruded at the
Artemovskiy Plant by tho standard method, u:~iug a 6uo t
hydraulic press and centrally bored shells made of cut
lengths of rod extruded on horizontal presses. The
shells have been bored on specially set lathes; this,
in addition to increased production costs, increased-the
proportion of produced scrap metal. These shortcomings
of the production technique have been eliminated by the
staff of the Artemovskiy Plant, where a neur method of
manufacturing tube stock has been devoloped and put into
practice. The advantage of this method (uhich coiisists
in using horizontal hydraulic presses for extruding not
solid rod but hollow shells) is that it does not
necessitate any modifications in the existing equipment
and can be employed on any horizontal press equipped with
piercing attachment. Extrusion of the hollow shells is
carried out with the aid of a specially designed mandrel,
Card 1/5 shown in Fig 1. The normal practice in tube extrusion is

65694
SOV/1 36-i 9- 1(.,- 11/18
A Method of Extruding Tubes with a Small Inside Diameter
to use a cylindrical mandrel, the diameter of which is
equal to the inside diameter of the extruded tube.
Consequently, it is difficult to extrude tubes with tile
inside diameter less than 22 mm, because during the
piercing operation a small diameter mandrel is easily
shifted from its original central position, as a result
of which a tube of non-uniform wall thickness is produced.
The mandrel designed by the present authors consists of two
parts; shaft and tip. The diameter of the shaft is
considerably larger than (50 to 60 mm) the inside diameter
of the extruded product; this is to ensure rigidity of
the tool during the piercing operation. The tip of the
mandrel is shaped like a bottle neck: it tapers towards
the end of the mandrel and ends with a cylindrical
portion 15 to 20 nun long, the diameter of which is equal
to the inside diameter of the extruded tube; this
cylindrical portion is located during extrusion in the
centre of the extrusion die, with which it forms the
annular space through which the metal is forced out. The
extrusion process is illustrated diagrammatically in
Card 2/5 Fig 2, showing: I - container; 2 - die holder; 3 - die;

j i " 1
A Method of Extruding Tubes with a Small Inside Diameter
4 - mandrel; 5 - extruded tube steel; 6 - billet;
7 - dummy block; 8 - main ram; 9 - mandrel holder.
The mandrel can be made either in one piece or with a
detachable tip. For extruding tubes ifith the internal
diameter larger than -15 mni, it is recommended to use a
one-piece mandrel made of steel UhM; for extriidiiig
tubes with the internal diameter smaller thall 15 "kill, it
is better to use a mandrel with a detachable tip, with
the shaft made of steel ZKh2V8 arid the tip of a more
heat-resistant material. The construction of the two-
piece mandrel is shown in Fig 3 (a - shaft, b - tip).
Setting of the press is illustrated in Fig 4, showing
1 - die; 2 - mandrel; 3 - mandrel positioning nuts;
4 - main ram cross-head; 5 - piercing cross-head pillars.
The usual sequence of operations is employed in extrusion.
In order to evaluate the new teciiiiique of extruding tube
stock for the 6o0 t press, a series or te.9ts wcks carried
out in which two batches of holloi~ brass, siiells (21108 kg)
were made by the old process arid three (5475 kg) by the
new method. When the old method was employed, rods of
Card 3/5 97.5 nun diameter were extruded from 250 x 650 nuii billets

6.569h
S(W136-59-1(-11/18
A Method of Extruding Tubes with a Small Inside Diameter
on a 2500 t hydraulic press, these were ctit into 100 mm
long pieces through which holes `2 mm ~Hamcter ivere bored.
(The length of the bar steel.-. wns limited to lUO mm to
avoid boring frow two ends.) After boring, the inner
surface of the tube stock was very rough and the Lvall
thickness varied by as much as I to 2 imii. When the iieior
method was testedq the tube stock was extruded, with the
aid of the newly designed mandrel, from 250 x 650 mm
billets on a 2500 t press at 750 to 780OC; the inside
surface of the extruded stock was smooth, the variation
of its wall thickness being 1 to 21 mni in the first
extruded portion and not more than 0.6 min in the end part.
Data collected during these tests and reproduced in
Tables 1 and 2, show that the proportion of scrap,
amounting to approximately 2911,0 in the old process, was
reduced to about 17% when the new method was employed.
No difficulties have been expericticed in applying the new
method on the industrial scale, the new mandrel having
proved to be as durable as that used in the normal
Card 4/5 extrusion. Thus, in the period 20th February to

6569h
SOV/136-59-lo-ii/18
A Method of Extruding Tubes with a Small Inside Diameter
20th April 1959, during which 202 t of tube stock
(97.5 x 22 mm) was extruded by the new technique from
billets measuring 250 x 650 mm, only five mandrels were
expended. The method can be used for extruding profile
tubes (rectangular, square etc) with the inside diameter
of 6 to 8 mm. Acknowledgments are made to Yu.1.1gnatlyev
and D.T.Karpachev, who participated in this work.
There are 5 figures and 2 tables.
ASSOCIATION: Artemovskiy zavod ,Tsvetmet,, (Artemovskiy Plant "Tsvetmet":
Card 5/5

-- XIMp _&-T,; SAFRONOVr 'N.Vl
Use of a coil method in the preparation of copper pipes with a small
cross section* Promsenergo 16 no*5&15 MY 161* (MM 14:7)
(Pipe., Copper)

-KIM. K.T4 YEGOROV, B*Ae
manufacture of small diameter copper pipes in coils. TSvet. met.
33 no.6188-91 Je 160. (MIRA 1414)
(Pipe, Copper) (Drawing (Metalwort))

YEGOROV, B.A.; KIM, K.T.
Adopting three-line pipe drawing mills of the "Spidem" firm.
TSvet. met. 35 noo9t79-85 S 162. (MIRA 16:1)
(Pipe mills)

TSUKERVANIK, I. P.; ~IHOJ~h,;JKMATOVAp A. S.
Acylation of aromatic compounds. Part 6: Acetylation and
bernzo3yation of 2-metb7lnaphthalens and &oenaphthene in the
presence of iron and ferric chloride. Zhur. obo khim. 33
no.1:234-237 163. (MIRA 16:1)
1. Taahkentakiy gosudarstvennyy universitet.
(Naphthalene) (Acenaphthene) (Acetylation)

JR
16(0)j 28(a) PIAN I MOB IMAMTIGB 801/3)65

lestay dokt&4*v B~ehc?Anlya pa mst~ttlo I rrlo~fr%
ore&*tv vycbtstltal-wy tokhntkl (Dmtllms of Arpatis of tho Cuxrwr~ Os
OomputattwAl Ngthomettes WA t1w Use of Oampler ?wVbAIqM6) mks. IrA
63 1. 4M *opt&* prtutvC
U&JjjerAl "eartaA Arnelost klaUslys rest MR. Vrohlolitallay tftatr,
U4 usam" Mok Ran. ufftitqt fivtowattki I Illemakhastit.
So ewtrl~utors
vWWWRI Thig took to Lai-ft&h for psre a" %Musa -0-tiet"s. scientists,
gndwips m4 ecteattfle v6rktro. wboss VwIL Javolvet oeoputAlloo, MA %kA In
of digttal srA aralog electroule comptere.
nas bwk ~taus munwiss or reports wou at tka coeftronae as
caviuni
co.pu t1cual ?kVom%Uc* and the Application of OmWuter Itchniques.
t&
Ttm book to ilvidtd into two wta yorts. The nrot jar% Is Am"%" to
coputationol smowsouts am cootsize iq s%msxIos or n;orts. em, soon"
to coop"tag techniques sM acetates 20 stoweeriss of
:
l
r
tles an vantiamot. no rehrene0s an tins.
1'ra
AlOsterov, B.A. VatNuettal Disertptlem of preft.j., le 5oUsa,
alset.-p-tIo Or"- u
IDAUAShIlli, I.10. The Alu-4titobell Problem to, , g.,A For"
BY T~ Com"strI6 CUvular tylleders of Vkrluu V&torWo
Sarsuina, L1. mm, lbrk or us Jbithountical tables Dranob or em
courutim Onimp at the Ae"wor of Gotebool, an 13
ftftcv, A.3L Solstice of %be rmodamoutal Problem of the pUtroUee of
029-000-1,10, Petroleum by RelLeetIft lbtbd, IA
YershoT, A.P., med T.JL M"Oehki.. A"emistie Propmeming, tkw on".
02sr, NAW, FWASSental Problems 15
T.Uh-ow. ?.K. A A.K Trob-.JL,_~, K. M_hxt., r_ A_ iA
01"alk4)pod
WJ T
V
PbddW
.
.
.
r,%SU. Omppw%ep ,qVsmmIx, bmitse
ft%bN 'StnIa"Dompolor (M)
0" 31t

yERSHOVI A.P. -KDI K V. - POMEMGIU, V.D., otv. red.; ORWVA, I.A.v
red.,- takhn. red.
a manual]
(programmin program for the "Strela-3" computer..
Progremmiruiushchaia prograna MR vychialttellnoi mashirq
"Strela-3" (,PPS),- nikovodstvo dlia polIzovaniia. Moskva., Vy-
chislitelfrai tsentr AN SM . 1961. 61 v. (MIRA 15:1)
1. Otdel teoreticheskogo prograrnmiravaniya Vychislitallnogo
tsentra AN SSSR (for Yersboys Poddery-ugin).
(Programaing (Electronic computers))

L7
., 7/0
AUTI-ms:
TITLE:
PERIODIC,~L:
329,9
S/I VIA] looolo 1. )101 vo 70
D209/D302
Velikanova, T.~j., Yerahov, A.P., Riiii K V , Kuroch-
kin, V.1-1., Oleynik-Ovod, Yu.A. an_eil*jo~
r
'~u~,in, V.D.
Programming program for machineu
Referativnyy zilurnal. `%N?tOT',1atikq i radiocleictronika,
no. 11, 1961, 3, abstract 11 B14 (Tr. Vacs. sovesh-
chanlya po vychisl. matem j primencniyu sredstv
vychisl. tehlin., Baku, 4W AzerbSSR, 1961, 81-93)
TEXT:
It is shoxm that in 1957 in tile Coll1puting Center of
the Academy of Sciences of the USSR. work on forming tile sysem pro..
gramming program (SPP) was completea. By using SPP the need for
formulating programs of actual problems is avoided and this process
is replaced by the process of compiling -the inforriation for SPP con-
cerning the problem being solved. In woeling out the mithod of pro-
viding information about the problem for S13P the foLiowing, points
were observed: a) If possible, to provide the best approximation of
C ard 1/4
32903
S/I 9t, /6 1 /()00/01 I/o 16/0 70
Programming program for machines D2093302
0
the information to mathematical formulation of t
calculated fornwil-ae); b) reduction of the vojjjlj~e c)f auxiiiary and
-ul Mathematical
1:1 -it thL
technical Nqorj~ coilijected, as a r -c, of
purely work
formularion of the problem and Witi, the si)ecific charactel
on universal computing machines; C) that from ti'10 illfOrmation
'd
could see more or less accurately the strilet""O Of '_"'C' corlple c
program; d) reduction of volume Of total illf'c)r1liation. i-11 ur~ler to
make it more descriptive and easiLY surveyed. The ill,ormation for
Spp consists of five parts: 1) Program sOICRIC " basiC JL Dal-t Of tile
information; 2) operators (0); 3) informatioll about Lnagnitudes;
4) information about memory blocks; 5) blocks. E>:cej)L for the pro-
gram scheme all the remaining Parts of the infor"Lltion do -,lot have
to be given in an actual problem. The whole ten-,A110109Y "sec' '11
The progr;ua SC1101110 is oi-vel-1. It is shoWn
this paper is explained. -1 ') ) Ari th-
that the scheme can include O's Of tile follo""11" tlypes: I -address-
metical 01s; 2) restoration 01s; 3) no,-l-standard o1s; 4) re
" heme is
-or in LhC 'c
oper-at.
ing 01s; 5) double cou"lt"'r' O's- type oi the 0 f1)l'-Ok1e(' by tile
represqpted by a letter giving the
Card 2A

..) ': n) '3
S/194/61/000/011/016/070
Programming program for machineG D209/D3O2
informotion about the given 0. The aritImietical O's and certain
non-standard O's of special form are the exceptions. The popularity
of the program scheme, the nearness of its form to the fonlk of the
mathematical formulation of the problem are obtained basically by a
specific solution of the registration of mathematical formulac in
arithmetical 0 and preservation in the program scheme. Examined in
detail is an arithmetical 0 which realizes a single calculation to
a certain sequence of formulas of the type FOcj, x2r ... xn) = > Y,
where the symbol - ">" indicates that y is a result of calculation
according to the formula F. Further on, logical O's non-standard
O's, cycles, re-addressing O's, restoration O's and double counting
O's are examined. Finally, an example of integration of a parabgl
equation of the type
('r 22
0.75 + 2) '3~-;3 1
x x)
w &X2
z(xlo) 0; Z(O't) - 0; Z(1'0 ~ t
Card 3/4

32903
S/194/(-)1/000/011/016/070
Programming program for machiner. D209/002
up to the moment when t - T is given. One of the possible c--Icula-
ted formulas is shown. Information is provided ibout the ~)lock and
the program scheme. Lf-Abstracter's note: Complete translation-7
1 Card 4/4

PHASE I 1300K EXPLOITATION SOV/5962
Voonoytiznoyo noveshchanlyo, po vychiviltollnoy matematike I prime-
nenlyu arodatv vychialltallnoy tokhnikl, Daku, 1958.
Trudy (Transactions or the All-Union Conrerence an Computer Vathe-
natics and Applications or Computers) Baku, Izd-vo All Azerbayd-
zhanakoy 3311, 1961. 254 P. 500,coples printed.
Sponsoring Agency: Akademiya nauk Azzerbaydzhan3koy 53R. Vychis-
lltellnyy tsentr.
Edo.: A-A. Dorodnitsyn, S.A. Alookerov, and K.F. Shirtnov; Ed. or
Publishing Houses A. Tillman, Tecli. Ed.- T. lanailov.
PURPOSE: The book In Intended for 6athematicians and other ope-
ciallota Interested In computer theory and ucen for computers.
COVERAOE: The book contains the texts of 24 phpern pre-vented at
the All-Union Conference on Computer Mathematica and Applica-
tions of Computers held in Baku,3-6 Feb 1958, The "Rosolution"
Card 1/0

Transactions of the All-Union (Cont,.) SOV/5962
of the conference, consisting or.propouala ror accelerating the
development of computer matbematic3 and computer enginecring,
Is also included.
TABLE OF CONTENTSi
1(halilov, Z.I. Introductory Remarks 7
D>rodnitsyn, A.A. Problems of Computer Technology 9
PAn I. COMPUTER MATHEMATICS
Vakilov, Sh.l. Boundary Problem of.the L4place Equation
for a Composite Rggion 14
Dzhabarzade, R.M. The Use of Computers for 0 perational
Weather Forecasting 20
Korolyuk, V.S. Construction or L,~glo rroD2om Algorithms 23
Card 2/0

Transactions of the All-Union (Cont.) SOV/5962
D--habarzade, R.M. Standard Pubroutine for Si>lvIng a 8yatem
of Ordinary Differential Equations 36
Bolotuerkovokly, O.M., and P.J. Chushkin. Solution of High-
Speed Aerodynamics Problems on Electronic Computern 39
Khovanz;kiy, G.S. Work of the Nomogr.= Section of the Com-
putation Center, Academy or 3cianoes USSR 53
Rzhrin3-Invi, G.E. Standardization and Moehanizntlon of
the Calculation of Nomogram From Aligned Pointo 68
Yershov, A.P., and V.M. Karochkin. Some Problems in Auto-
ma c Tlosramming 72
Velikanova, T.M., A.P. Yershov K.V. KAm,-V.M. Kurochkln,
Yu.A. Oloynik-Ovod, and V.D. iio~~e_i;yuigin. Program for
Automatic Programming 81
Card 3/6

S/044/62/0OU-j"006/ 1 15/1,27
B 1 62/B 102
AUTHORS; Velikanova, T. M., Yershov, A. P.s_Kjpt_K. -,, Rurochkin,
---Y
V. M., Oleynik-Ovod, Yu. A., Podderyugin, V. D.
TITLEt Programming program for a computer
PERIODICALj Referativnyy zhurnal. Matematika, no. 6, 1962, 70, abstract
6V376 (~r. Vaes. eoveshchaniya po vyohial. matem. i
primene~iyu aredatv vyohisl. tekhn. Baku. AN AzerbSSJR, 1961,
81 - 93).
TEXT: A programming program (PP) is described for the computer C-3 (S-3).
The information which the programmer prepares for the-PP consists of five
parts. (1) scheme of the program, (2) removed operators, (3) information
on quantities, (4) information on memory arrays, (5) arrays. The scheme
of the program may include arithmetical and logical operators, recovery
operators, non-standard operators, re-address operator3 and binary G/6
counting operators. In the scheme of the program the necessity of a
cyclic repetition of a certain group of operators may be indicated, for
which this group is enclosed in brackets. Under the opening bracket of the
cycle the parameter of the cycle and its initial value, if it differs
Card ;/2

5/044/62/00-/006/115/127
Programming program for a computer B162/B102
I
from zero, are indicated. If the number of repetitions of the cycle is
determined by a finite value of the parameter, then the latter is placed
under the opening bracket. A description is given of a method used in the
PP of recording the occupied cells of the memory. An occupancy table is
drawn up in which each place corresponds to a given cell and containS a
1 if the cell is free. The number of the free cell is determined from the
modulus of the order of the number obtained by normalizing the line of the
table differing from zero. An exaMDle Of information for the PP is given.
[Abstracterls notes Complete translation-i
Card 2/2

S1 137/6 2/MD/006/06 6116
A05?_/A1OI
AUTHOR3: Kim, G. V., Abdeyev, M. A., Ponomarev, V. D.
TITLE': The pressure of "un and Cd vapors over their alloys
PFRIODICAL: Referativnyy zhurrial., Metallurgiya, no. 6, 2%-2, 21), abstract 6G22j--I
("Tr. Altaysk. gornometallurg. n.-i. in-ta", v. 11, 1(,)u5i, 148 - 55)
Tt-XT: Thermodynamic constants of components of Cd-Zn system are deter-
mined for three alloys at 500, 600 and 7000C. The degree of separation of Cd
and Zn at 500 and 6000C is higher than at 1,000C, therefore for vacuum distilla-
tion 6000C should be taken. Equations for the dependence of partial pressures of
Cd and Zn vapors on the temperature are given for the alloys concerned. There
tire 9 references.
A. Tseydler
[Abstracter's note: Complete translation]
Card 1/1

S/044/62/000/008/072/073
AUTHORS: Yershov g A. P.
TITLE: The programming program for the computer "Strala-311
(PPS).(Directions for the use)
PERIODICALi Reforativnyy zhurnal, Matematikag no. el 1962j 67,
abstrq.ct BV393K. (Vychial. tsentr AN SSSR, M., 1961, 63 p
TEXT: One describes veri detailed-rules for the writing down of*
the operator schemes of the programs which shall be programmed for the
computer "Strelall b~ aid of the programming,program. Examples are given.
[Abstracter's notes Complete translation.]
Card 1/1

BOGMUOV , K. T. ;I. K 114)K.V.; RAGARLIK, V.A.
Numerical solution of hydrodynamic equations of tides on the
electronic computer for tho watel, ur(iji of the, Pacific
Ocean. Trudy Inst, okean,. 75:73-98 164.
(1-1 ,1'.7: , " )

KIM, L.,,-.kand. tekhn. nauk; BABUSHKIN, L., Inzh.; WKSHIN, L., inzh.
11vat treatmont of monolithic Joints of panels by ferrowirnf-t1o
heaters. Zhil. stroi. no.9%26-27 165. (MIRA MID

GRINVALID., G.; POPOV., V. . LIPATKIN, Ye.; KIM, L.; ZYABLOV, V.; BIRYUKOV, P.
Transportation of large elements, Stroltell 8 no-5.*2&-27 * 162.
WIRA 15t7)
(Precast concreto-Tranaportation)

DAMMAN) B., kand.tekhn.n&uk;-KIM,_.~.., in?,h.
Reconstruction of the DSP-24sn grain dryer at the Miass Grain
Receiving.Station. Muk.-elev. prom. 28 no.10-.18-19 0 162,
(MIRA 16:1)
1. Moskovskiy tekhnologiche ekiy institut pishchevoy promyshlennosti.
(Miass-Grain-Drying)

DAMMAN, B., kand.tekhn.nauk; KIM, L., inzh.
Rising and dropping temperature regimes in shaft grain dryers.
Mak.-elev. prom. 29 no.6:13-14 Je 163. (MIRA 16:7)
1. Moskovskiy tekhnologicheskiy institut pishchevoy promyshlonnosti.*
(Grain-Drying)
9

, -XIM. L,
Effect of drying parameters on the quality, of grain and the
efficiency of a grain dryer. Muk.-elev. prom. 29 no.9:18-20
S 163. (MIRA 17:1)
1. Moskovskiy tekhaologicheakiy inatitut pishchevoy
prceorehlennosti.

KIMJI L. A.: W-a*-r TleCh SCJ (4iss) -- ".4nalvals Of systprqR 0' sllz~-
Lonln,-,eml) T)
n
tS~Sjj, T,-nln~~m6 Cr6~)r of Tpnin cW 0.0wr of lAbor 1\ocl Banner Mining 1 ns t
G. V. Pleldianov), 110 coplos (KL) No 5, 1099, 150)

11M, L.A.
Reliability Wiese and methods of its calculation for electric
networks in open pits. Nauch.doklevymeahkolyl energe no,3;71-
79 '58. (MM& 12: 1)
1. Rekomendovano kafedroy gornoy elaktrotekhniki Laningradekogo
gornogo instituta imeni, G.V.Plekhanova.
(Blectricity In mining)

KIM, L.A., inzh.
and method of computing the reliability of electric supply
netvorks in open-pit mining. Rauch. dokl. vya. shkoly; gor. delo
no.3:166-175 158. (MIRA 11:9)
l.Predetavlena kafedroy gornoy elektrotekhniki Laningradekogo
gornogo instituta im. G.V. Plekhanova.
(Electricity in mining)

KIM, LA., insh.
Mathematical statietice in analyzing emergencies in open pit
mine electric syntemse Izvevyeeuchob.save; gortzhure no-7:
121-126 159. (KIRL 13t4)
1. Loningradskiy, ordena Lenina i ordena Trudovogo Kruenogo
Znazeni gorayy inetitut Imeni G.V.Plekhanova. Rekonandovana
kafedroy gornoy slaktrotekhniki,
(Bleatricity in mining)

KIM, LA. kand.tokhn.nauk
Analysis of the safety of electric supply diagrams for open Pit
mines, I9v*vys.ucheb.zav.; gor.zhur. no.10:119-125 '59.
(MIJu 130)
1. Isoningradekly gor~W inatitut.
(Blectricity in mining)

112-57-.8-18000
Translation from: Referativnyy 71urnalp Eloktrotokhnika, 1957, Nr 8, P 312 (USSR)
AUTHOR: Kim, L. T.
TITLE: Radional Methods of Obtaining Master-Frequency in Multichannel Systems Intended
for Short-Distance Communications (0 ratsionallnykh metodakh polacheniya
zadayushchey chastoty dlya mogokanallnykh alstem, pr&jm=cheTmykh dlya
BY.yazi na korotkiye rasstoyaniya)
PERIODICAL: Sb. nauch. tr. Tzentr. n.-i. in-ta svyazi (Collection of Scientific Trans-
actions ofthe Central Scientifio-Reaearch Institute of Communications), Moscovi
Svyazlizdat, 1956, pp 156-177
ABSTRACT: Use of a standard frequency for obtaining a master frequency in an oscillating
systez intended for multichannel high-frequency short-diatance systems is consid-
ered, in the following versions: direct us~ of the standard frequency (after its
filtration and amplification); an automatic frequency control; and use of frequen-
cy locking. A conclusion is offered that the frequency-locking system is the most
promising. In case of high level noise on the line, the locking oscillator
should be combined with a
Card 1/2
112-57-8-18000
Rational Methods of Obtaining Master Frequency in Multichannel 5yBt0M8-
system of automatic phase control. Results Of tests of locking Oscillators
are presented. Bibliography: 1() items& N. Ye.
Card 2/2

Mmi #Am W. mad oft F~.

A. A.
WM,.M

(c 10 A. le
C IL Ap-
& .C-
IL a. owwr,-b.
f, owl
(c to A. 22
A. & C-
Ftp-..
-4-4
L A.
--,U-
P.N .
rm U. osatsoRW Mw%l" at WA lkl4atUls f0sbMIAO"I 9"14t7
wA iletwint CammalsAlm In. A. 4. Pnw (MB)i ft&m#
8-M "W.

5/0 ,YG'2/G00/CO4/0&2/Gj"I
111 C222
t C 4 j,. 4, 1,, t 1 [1
ndu- tr.),
01~,c,Irjcc~l ,I,_tvju_ 4 Ij i n
zhu-n-'al, 14,
(tijzv. vyL;"-- ucjjL-b!-.. zavedcni:;- Gorn. zh-
iV76
7, ;21-126)
T"4T. c'-uthor recommu,L~3 4, h of t-I.-O Studunt
nicas of dJ~for,~nt fz:Cto`!; 0"
va-jj~'ble inf, uL
criteriuLl to
of olQctricLL! net%.or'~-.s. Lot x. (i - 1,2, n b,~ the rosults
Qbt;c-rwitJ.un-- of breakagos under the influcnce of a 00--tain -,et c:.
4 = 1,2, ...,,n ) be the resul-Ls of obbo:,vationss -~ftc~rz
~Z~Uto-2s; let -.:,. (-
~2 2
U~ I I I I ~ - a'--
eliain-~*nLl- the influenct: of the '~.ctor2 unler ex AIIL-1-40,1; let
n.
uapt-' on of norz~i;14%~
x xi, 1,2). Ti,.un. (unucr thu i
n
ce i.,'Ach were not ex ~ly nionlionud bi the z.uthor) the
cand in icpeiidt~i, p1 i ci Y
Card 1/2

Cal ~;tatj~-,tic~; in 11 S1044,16 2/000/004/03 2,1099
ranCOM VariLblt~ C11'/C222
Z;"4 tri ~L ti o.,j 'Ad h
., r,
2 2 d U- V o
C4 VeA_L, LLI, 0i" 'r,~Odozl.
C, U,~'.
0,
e Ole 06t,::,Z-tIoj Of
17. - c - r, , t... orko C-rL discussed.
I-ir'stractc'rf 41 1
s ro'c-: transiatioj,.
Carc: 212

KIM, L& A., inzh.
Change the resistance of the variable rheostats. Avtom. . telem.
i sviaz' 5 no.5:40 My 161. (MIRA 14:6)
1; .
1. Kzyl-Ordinskaya distantsiya signalizatsii i avyazi Kazakhakoy
dorogi. (Electric rheostats)
(Railroads-Electric equipment)

3/035/62/oc)o/o 11/053/0'19
A001/A101
AUTHORS: Kim, L. Kh., Chirkov, G. N.
TITLE: Profiling with a level Instrument of the field surface ruid
furrow bottom In testing of plows
PMIODICAL: itererativnyy zhurnal, As~ronomiya I Goodoziya, no. 11, VX):~' 11~'
abstract lIG114 ("Tr. Vses. n.-i. in-ta s.-kh. mashinustr.", 1962,
no. 33, 1112 - 145)
TEXT: The authors note drawbacks of the method of determining the profile
of.field surface and furrow bottom by means of wooden rods with levels and pegs.
They describe the method of determining the depth of tillage with a hangit)g plow
by means of a level instrument. The use of this method is field to be expedient
for testing the performance of multiple hanging plows on a crossed field.
P. K.
FAbstracter's note: Complete translation]
Card 1/1

KIM, L.M. (TISellnograd, ul. Mon-'na, d.23, kv.5)
Romisoltation at a distrlot hospital. Vest. Kh.'r. 91 no.'Zz
56~59 D 16~. (MIRA 17 t 9)
1. 1z khirurgicheskogo otclelemilya fl'zav.- L.M. Kim) Mlagnitskoy
ue.~atkovoy bollnitsy (g'_'avnyy vra~!h - A.N. Slopova) Kupl-nskogo
raycna ChoVabin5koy oblaeti.

URAZAKOV, LU., KIM, L.N.; LITVINENKO, M.I.; TEN, O.D.
Treatment of residual manifestations of poliomyelitis in children
with Sary-Bulak mud. Zdrav. Kazakh. 18 no.1:3&-41 'M. (MIRA .13:7)
1. Iz Inotituta klinioheokoy i eksperimentallnoy khirurgii AN
Ka2SSR i dotbollnitos. "Askay" Alm-Atinskogo gorzdrava.
(POLIOMYUITIS)
(SARY-BULAK (KAZAKHSTAN)-BATIlSp MOOR A14D MUD)

KIM, L.N.; VUVNYANKOj, I.V.; SAROUVALOV, N.G.
Organization of the mblical care for children with sequolac following
poliomyelitis. Zdrav. Kazakh. 2-1 no.10:49-51 161. (ML-A 15:2)
1. Glavnyy vrach bollnitsy "AR-may" (for Kim). 2. Zaveduyusholdy
nevrologicheskim otdolenLyem Instituta organizatnii meditsinskoy
pomoshchi detyam (for Vovnyanko). 3. Bollnitsa "Aksay" (for
Samolchvalov). (POLIOMULITIS)

X324, L.P.; 14URTAZAYKV, A.M.
Effect of surface-aotive agents on the kinetics of the cathodic
behavior of titanium in sulfuric acid. Dbkl. AV Uz.SSR 21 no. 10i
30-33 164 (MIRA 19i1)
1. Institut khimii AF D2MR. Submitted June 14, 1963.

TCROFOV, A,P.; KT14 L.P,
Effer~t of the increased viscosity of components on the shape
of viscosity isotherms in normal systerm. Uzb.],Iim.zhur.
no.2~51-55 261. (KIRA 14: 10)
1. Tashkentskiy gosuniveraitet imeni. Lenina,
(Systemg (Chemistry)) (Viscosity)

ZAREMBA9 S.A., inzh.; KIM, L.P., inth.
Some problems In measdring the viscoaLty of heavy suspensions by
using a capillary viacosimeter under preasure. Nauch. soob. IGD
19:81-90 063. (MIRA 17j2)

KIM L T
Transistorized amPl-itude modulators and demodulators.
Elektrosviazl 19 no.1:11-22 Ja 115.
0 (MIRA 18;4)

BIRYUKOV, V.A.; M, L.T.; RAPOPORT, E.Z.
- -
Piinoipl6m'b~ omtrucUdn of-the V-2 apperatuo for mdtiplexing
rural co=urA.cation lines, Elektrosviss' 19 no.408-47 Ap 165.
(MIRA 18t()

ZHIYJN, V.P.; KIM, L.V.
[F.quipment used for assembling and methods of assembl-
ing; practices of the Fain Construction Administration of
the City of Leningrad] Montazhnye priaposobleniia i pri-
oaV montazhaj iz opyta Glavlaningradstroia. Leningrad,
Strolizdaty 1964. 63 p. (FI1U 17:6)

KIM, Leonid Vasillyevich; TITOV, A.M.) red.
[methods for the prescribed assembling of large-panel
apartment houses] Metody prinuditellnogo montazha krupno-
panelinykh zhilykh zdanii. Leningrad, Stroiizdftt, 1965.
154 P a (MIRA 18:4)

SHIROKOV, N.N.; -
. S.Y.; VILITHITSKIT, A.1,;
MISHIN, A.Te.
Improving operations of concrete mixing unit.a at the rein-
forced concrete products plant. Suggested by N.N.Shlrokov
and otbern. Rats.i izobr.predl.v stroi. no.11:17-19 159.
(MM, 13:3)
(Mixine, macb1nery) (Reinforced concrete)

FERSHIN, 14ikhail Aleksoyevich; FIGUM, Aleksandr Tir-ofeyevich;
NiM, Leonid Vasillyovich; TSYBAYEV, Igor' Gonnndlyovich;
EARKUS) B.M., red.; ALABYSHEVA, N.A., rodAzd-va; UIRTS,
V.L.Y tokhn. rod.
[vovable tool-repair shops on city-block construction sites]
Fo3,odviz)uWe in,9trwncntaltno-remontnXv mastorskie na ob"-
cktakh kvartallnoi zastroiki; opyt raboty Glavleningrndstroia.
Leningrad, 1963. 15 1). (Leningradskii dom nauchno-tckhniche-
skoi propagandy. Seriia: Stroltellnoe proizvodstvo, no.5)
(MIRA 16- 12)
(Leningrnd--Construction equipment-Maintonance and repair)

k I W)P.
Categor7: KazakhSSR/General Division. Problems of Teaching. A-7
Abs Jour: Referat Zh.-Biol., No 9, 10 MaY, 1957, 34992
Author : Kim, M.
Inst :n o t- -g- 1v -en
Title :The Teachings of I.P. Pavlov and Several Pedagogical Problems
Orig Pub: Ehalik magalimi, 1956, No 6, 22-27
Abstract: not abstract
Card : 1/1
-1-
KIM, M., Cand Tech Sci -- (diss) "Research into basic parameters of the
arrangement of bore holes in the benchings of open-cut u' ines (applica-
ble to the conditions of the Kounradf3kiy mine)-'' Alma-Ata, 1960. 16 pp;
with charts; (Academy of Sciences Kazakh S.1`3R, Inst of Metallurgy and-
Enrichment and the Inst of Mining Affairs); 200 copies; price not given;
(KL, 21-60, 124)

346CO
14, 65L)0 16 3SuU 3/044/62/000/001/052/06!
C111/C222
AUTHORt Kim, M,
TITLE: The approximute integration of linear partial differentia:
equations of second order with tvio variableij ~~ccording
to the Chaplygin method
PERIODICAL: Referativnyy zhurnal, Matematika, no 1. 19b2~ 55.
abstract 1V156. ("Uch., zap,. Kabardino-BalllrLrok. 1111-t",
1959, vyp, 3, 265-274)
TEXTt A theorem on differential inequUliliCS is proven for 'he
equation
uxy = a(x..Y) u x + b(x,y) U, + C(X,Y) u + f(X y)
with given valuus of u and u y on the smooth curve F! y (x) ('?Ik'x), 0)
ander the assumption tnat a - m ~> Ov b - k *# 0, -- - p >,, 0 in a cer'ain
domain containinG [-. The numbers in, k, p ure non-ne,-ative bnd there
exists at least one rigorous inequality An alCorithri fur the
tion of upper und lower functions is also given and its -:onver~;en,-%e
is proven. An illust-rutin, example is given,
Card 1/1 EAbstracter's note: Complete translation j

1 6. S 5u S/044/62/0J'J/001/O55/JCS1
Cill/C444
AUTHOR-. Kim, It.
TITLE: The upproxi:.iativu intagratin 0 f liaear partitki diffe-
rential equations of first orL',er ,-ith t.-,-o variables
acc-1rding to rhe method of S. A. ChapiyCjn
PERIODIC.'iL: Referutivn,,j zhurnal, Matematika, no. 1,
abstract lVl.'--,B.(ucil. m. Kabardino - laikurjk- un-t~
-15 - 81
1)"99 VyP. 2 2
TE:~T: Given is zin all-orithir, for the constniction of upper or
lower functions fir the solution of the equation
Zz +A
'J tj
with the initial condition z(X1 Y 0) -ip(x); there ic su,~posed t;,,ut
R 1> 0 aiid R'' is of -fixed si,~n.
z zz
[Abstracter's note: Complete translation.]
Card 1/1

34599
1L. (.S00 /,6, -b 6- S/044/62/000/001/051/061
C111/C222
AUTHORs
TITLEs An approximate integration of u system of non-linear
partial differential equations of second order and
hyperbolic type with two variables according to the
S. A. Chaplygin method
PERIODICAL: Referativnyy zhurnal, Matematika, no. 1, 1962, 52-33,
abstract 1V155- ("Uch., zap. Kabardino-Balkarsk.. unt.11
1959, vyp. 3, 262-293)
TEXTs Considered is the theorem on differential inequalitius
for the system of equations
2U 1 aul u1 ~u2 9u2
_X TY = f1(x, ax ~y ) u2p _d'9_9 -9-y
2 u2 1 u1 uI -a u 9 u 2
9 X~y , f2 ( Xtylu I T- _7_y P U 2 ~x 2 , 7Y
with initial oonditions on a smooth curve r, x - x(t), y = Y(t) (Y; < o).
Card 1/2

S/044j62/000/001/05!/061
An approximate integration of a C111/C222
The formulation of the theorem is analogous to the Chaplygin theorem
on ordinary systems of differential equations. The theorem is proven
assuming that
BU, OU ix: ITu Y11
are non-negative. In addition, an algorithm is given for the construc-
tion of the upper and lower functions, and its convergence is proven,
An illustrating example is given.
[Abstracter's notex Complete translation.]
Card 2/2

RAKISHEV, V. i_~~,J4,,__gqrnyy inzh,
Determining the length of delay in short-delay blasting. Sbor.
nauch. trud. Kaz GMI no.l9t23-28 160. (MIRA 15:3)
;Blasting)

MORDUKBOVICH, I.L.; KIM, H.
Automatic control of sludging of boreholes. Sbor. nauch. trud.
Kaz CHI no.19:113-115 16o. (MIRA 15:3)
(Boring machinery) (Automatic control)

OMARBAYEV, N.; KIM, M.
Mechanical tamping stick for charging ascending holes. Sbor. nauch.
trud. Kaz G14I no.191ll6_120 16o. (HIRA 15-3)
(Blasting)