ENGINEERING LITERATURE PUBLISHED IN CSECHOSLOVAKIA

• Document Type: CREST
• Collection: General CIA Records
• Document Number (FOIA) /ESDN (CREST): CIA-RDP81-00280R000200040007-5
• Release Decision: RIPPUB
• Original Classification: U
• Document Page Count: 10
• Document Creation Date: December 22, 2016
• Document Release Date: April 11, 2011
• Sequence Number: 7
• Publication Date: October 31, 1956
• Content Type: REPORT

Sanitized Copy Approved f=lease 2011/04/11: CIA-RDP81-0028OR000200040007-5
Adw~w
 Sanitized Copy Approved for Release 2011/04/11 : CIA-RDP81-0028OR000200040007-5
Technologie kovu II (Technology of Metals, II~ by A. A. Gladilin and N. P.
Dubinin. Collection of works on the technology of casting, shaping, melding,
and cutting of metals, and detailed description of the equipment used in all
these processes. 372 pages, 387 photographs, bound, 39.50 crowns, SNTL.
Technologie kovu III (Technology of Metals, III), by A. N. Gladilin,
N. P. Dubinin) and others. Description of mechanical equipment and techno-
logical procedure in machining of metals and some nonmetallic materials. 212
pages, 193 photographs, bound, 25.80 crowns, SNTL.
Elektrojiskrove obrabeni kovu (Electric Spark Metalworking),, Essentials
of electric spark metalworking; basic operations and use of equipment. Elec-
trical engineering data necessary for understanding the principles of electric
spark machining, proper use of equipment, and prescribed safety precautions.
146 pages, 111 photographs, unbound, 8.17 crowns, SHTL.
Elektrojiskrove obrabeni kovu (Electric Spark Metalworking), by B. R.
Lazarenko and N. I. lazarenkova. The bases of the theory of electric spark
machining and explanation of the machining of metals and of nonmetallic con-
ductors, typical examples of use, and further possibilities of development of
the process. 96 pages, 58 photographs, unbound, 9.50 crovrs, SNTL.
Elektrojiskrove obrabeni kovu (Electric Spark Metalworking), by M. N.
Ulitin. Explains the principles of this new method of machining, includes
data for various methods of sharpening and lapping, and describes electric
spark surface strengthening. 32 pages, 8 photographs, unbound, 1.20 crowns,
Prace.
Elektricke spusoby obrabeni kovu (Electrical Methods if Metalworking),
by B. P. Zakbaror. Thboretical bases of electrical metalworking by the
electric spark and ahode-aechanical methods; their perrsibilitiee aid advan-
tages ai compared to existing methods of machine tutting of metals, 56
pages, 25 photographs, unbound, 1.94 crowns, Silt.
Fysikal: i zaklady elektrojiskroveho obrabeni kovu (Physical Bases of Elec-
tric Spark Metalworking), by B. N. Zolotych. A complete survey of the history
and development of research in the electric spark metalworking field, the phy-
sical nature and the course of metal erosion arising from an impulse discharge
in the liquid dielectric medium. 88 pages, 50 photographs, unbound, 6.20 crowns,
SNTL.
Heat Processing
kuka o kovech a tepelne zpracovani oceli (Science of Metals and Heat Pro-
cessing of Steel), by S: G. Dogdanov. A debcription of various types of alloy
etcel, nonferrous and bearing metals, heat processing of high-speed steel and
its substitutes, cold pressing of metals, and methods of protecting against
corrosion. 208 pages, 124 photographs, unbound, 12.90 crowns, SNrL.
 General Technology
Technologie kovu II (Technology of Metals, IIa by A. N. Gladilin and N. P.
Dubinin. Collection of works on the technology of casting, shaping, welding,
and cctting of metals, and detailed description of the equipment used in all
these processes. 372 pages, 387 photographs, bound, 39.50 croons, SN1'L.
Machining
Technologie kovu III (Technology of Metals, III), by A. N. Gladilin,
N. P. Dubinin, and others. Description of mechanical equipment and techno-
logical procedure in machining of metals and some nonmetallic materials. 212
pages, 193 photographs, bound, 25.80 crowns, SNTL.
Elektrojiskrove obrabeni kovu (Electric Spark Metalworking), Essentials
of electric spark metalworking; basic operations and use of equipment. Elec-
trical engineering data necessary for understanding the principle-3 of electric
spark machining, proper use of equipment, and prescribed safety precautions.
1136 pages, III photographs, unbound, 8.17 crowns, SNTL.
Elektrojiskrove obrabeni kovu (Electric Spark Metalworking), by B. R.
Lazarenko and N. X. Lazarenkova. The bases of the theory of electric spark
machining and explanation of the machining of metals and of nonmetallic con-
ductors, typical examples of use, and further possibilities of development of
the process. 96 pages, 58 photographs, unbound, 9.50 crowns, SNTL.
Elektrojiskrove obrabeni kovu (Electric Spark Metalworking), by M. N.
Ulitin. Explains the principles of this new method of machining, includes
data for various methods of sharpening and lapping, and describes electric
spark surface strengthening. 32 pages, 8 photographs, unbound, 1.20 crowns,
Prace.
Elektricke zpusoby obrabeni kovu (Electrical Methods ?,f Metalworking),
by B. P. Y.akbarov. Th}oreticai bases of electrical metalworking by the
electric spark and ahode=mechanical methods; thieir -p&nibilities aM advan-
tages ae compared to erlsting methods of machine nutting of metals: 56
pages, 25 photbgraphs, unbound, 1.913 crowns, SNTL.
Fysikat?I zaklady elektrojiskroveko obrabeni kovu (Physical Bases of Elec-
tric Spark Metalworking), by B. N. Zolotych. A complete survey of the history
and development of research in the electric spark metalworking field, the phy-
sical nature and the course of metal erosion arising from an impulse discharge
in the liquid dielectric medium. 88 pages, 50 photographs, unbound, 6.20 crowns,
SNTL.
Heat Processing
Nauka o kovech a tepelnc zpi?acovani oceli (Science of Metals and Heat Pro-
cessing of Steel), by S: C. Bogdanov. A description of various types of alloy
steel, nonferrous and bearing metals, heat processing of high-speed steel and
its substitutes, cold pressing of metals, and methods of prctecting against
corrosion. 208 pages, 124 photographs, unbound, 12.90 croons, SNTL,
 Povrchove kaleni plamenen (Flame Surface Hardening), by L. I. Gotlib.
Theoretical bases of flame hardening, methods of direction and control of the
process, permissible variations, description of the hardening equipment, and
choice of conditions [for hardening. 152 pages, 43 photographs, unbound, 12.15
crowns, SUTL.
Ohrev kovu a slitin v elektrolytu (Alloy and Metal Heating in Fused Salts),
by I. Z. Tasnogorodakiy. Physical essentials of heating of objects in fused
salts, construction of equipment for heating in fused salts, and its use in
precise heat treatment of parts. 96 pages, 83 photographs, unbound, 6.46
crowns, SNTL.
Tepelne zpracovani ocell a litlny 1 (Heat Processing of Steel and Cast
Iron I), by I. E. Kontorovich. Str;,ture of technical iron, structural change
in beat and chemical-heat treating, taie influence of composition on cant iron
properties, types of can iron, cast iron with Fill holes, this use of individual
methods of heat and chemical-heat treatment of stAtl?aid cast iron. 264 pages,
203 'photographs, bound, 2-4.90 croons, $TL.
Tepelne zpracovani o:.eli a litiny 11 (Heat Processing of Steel and Cast
Iron, II) by I. E. Kontorovich. Commentary on the most important .iloy steels,
their production, the influence of the alloy admixture upon the properties of
steel, the theoretical and practical conditions of their heat treatment accord-
ing to most recent experiences, and on the use of alloy steels in constructio4
techniques. 218 pages, 181 photographs; bound, 19.55 crowns, SNTL.
Novinky tepelnel?o zpracovani (heat Processing News), by J. Ye Koretskiy.
Newest Czechoslovak and Soviet advan:es in hardening shops and metallurgical
plants which raise work productivity and improve the quality of production.
90 pages, 55 photographs, unbound, 7.03 crowns, Prace.
!lechanisace tepelneho zpracovani !Mechanization of Heat Processing), by
A. G. Solodikhin. Collection of drawings for the mechanization of heat and
chemical-heat treatment of meta'Ls. 52 pages, 96 photographs, bound, 11.20
crowns, SNTL.
Technologie strojirenske vyr oby V-Tepelne zpracovani Nava (Technology
of Engineerizg aafacture.V-Heat Processing of Metal). Various methods of
heat and chemical-heat treatment of steel, cast iron,.and -nonferrous metals,
heat tre*tment of 151ain, alloy, and sutistltute?steeltools, beat, treatment
of machine parts and instrumefts, and steel solidification. 192 pages, 212
photographs, boand, 23.75 craw z. ENTL
Uplna mechauisace tepelneho zpracovani (Complete Mecbunizatton of Heat
Treatment)'. Collection of addresses from the scientific technical conference
describes the heat treatment of autcwobile parts, treats the beating of parts
by ea high-frequency currant, and heat tontrol and work control' of heatf-ig fur-
naces, and describes various instrzsen?cs for the aptosatic control of heat and
chemical conditions. 128 passer 72 photographs, unbound, 8.55 croups, bR'rL
Elektricke avarovani oce?i pri opravach stroJniho zarizeni (Electrical
Vnl n4nr? of Cfn.1 Tn Qan.4r n1` Un.h4nn Cn, 4rq.,nr41 1. ., V A ?%Ov. EX_
Sanitized Copy Approved for Release 2011/04/11 : CIA-RDP81-0028OR000200040007-5
nrrr- W1111 lore wr lnlnU vn IP rMnMrl ~. r? T I n----- --
 Celostatni aktiv avarecu (ra.'c-rwide Welders Conference). Addresses from
the welders' conference in Prro dealing with the "Volodin" method of welding
with grouped electrodes, the "Michu.)lov" method of three-phase arc welding, the
"Doutnac" method of welding with 1ar3rr diameter electrodes, depap heat, immersed
electrodes, and welding of al=in-,LL in an inert gas. 226 pages, 132 photographs,
unbound, 19.75 crowns, SNTL.
Svarovaci techniks v SSSR Welc1nq Techniques in the USSR) by A. A.
Chekanov. A brief survey of the de?cn-opment of welding techniques in the
USSR, the areas of its usage- eq-tiplrent and materials used in welding, and new
technological advances. 126 pages. 41 photographs, uabcund,8.74 crowns, SNTL.
Svarovani (Welding) by D. L. ulazmaoenko. Bases of theory and practice
of all methods of welding used in inda3try, including welding and cutting by
an electric arc, resistance welding, torch welding, and oxygen cutting, control,
safety precautions, work orgar.tzattot: and veldirg s':andardisation. 424 ptRen.
261 photographs, bound, 2h crown--. SNI'L.
Svarovani barevnych kovu 1'deld;n? of Non-Ferrous Metals) by Ye. L.
:Qynchkin. Proven methods of weldir..; non-ferrous metals by torch and art tech-
niques, copper and alloys, nicK.eL _--d !ts alloys, lead, aluminum and its alloys.
108 Fcges, 65 photographs; untj,rd? 7_Cj crowns, SNTL.
Abeceda svarovani plauenem 'T:.e M" 's of Torch Welding) by V. Kriz. and K.
Vesely. A detailed description c?f welding of steel and nonferrous metals by
torch, ortgen cutting, and soldc:i t t' gas. Explains basic concepts, welding
conditions, and technology of tecithical gases. 144 pages, unbound, 8.35 crowns,
Prace.
Tvrde navary cHard (Surface P?tild Up] Welding) by K. Loebl. A practical
handbook for the wilder, conta_ning ?rxy1c infortration on welding, welding al-
loys, and the technology of weldlug and the control of welding [probably sur-
face welding]. 80 pages, 44 photographs, unbound, 5.30 crowns, SNfL.
Svarovani trojfazovytn oblouktm ?4h_-ee-Phase Arc Welding) t?? G. P.
Mikhr.ylov. An analysis of the treor-tteal bases and technological advances
of manual and automatic asps weldt:,c. description of feed devices, electrodes,
holders and other equipment. and boviet experiences with this method of weld-
ing. 1~4 pages, 146 photographs, .in*-ouad, 11 crowns, S1PTL.
Kontrola Jakosti syaru Weld Quality Control) by S. T. Nazarcv. Defects
in welds and reasons for them] ?rarivaae rethods of control, including external
inspection., metallographic exaninat:.ons, chemical analysis, mechanical tests,
X-ray and radioactive emission (-oa:rol. u.acnetic control, and quality control
of resistance vclded seams. 205 Fads; 149 photographs, unbound, 13.30 crowns,
SNTL.
Svarovani litiny za studraa tCold Welding of Cast Iron) by A. G. Nazarov.
Description of a new method of cc!d v-ldirg of cast-iron parts using combined
electrode groups. 32 pages. nano ^'. 1.71 crowns, Prsce.
Sbornik prac zo zvaranta ., terelr.cho spracovania kovov (Almanac of Welding
and Heat Treatment of Metal). Th:? influence of deoxidation and technological
treatment on welding propei'.ies, t:e rt:rrcnt status of experiences on the weld-
ing properties of construction stt.?l. Optimum conditions for the annealing
of steel pipes in continuous retort it:rraces (prubezne retortove peci), the
influence of welding on structural chsn&es of construction and tool steel. 70
pages, unbound, 9.50 crowns, :1,J j 31,1.??nska akademia vied a tmtenie, Slovak
Academy of Sciences and Arts).
Sanitized Copy Approved for Release 2011/04/11 : CIA-RDP81-0028OR000200040007-5
 Elektricke zvarovsaie ,elezobetonovych armatur (Electric Welding of
Concrete Reinforcing Rods,' by Ye. G. Sovalov. General experiences obtained in
resistance arc welding c2 concrete reinforcing rods. Special attention is given
to the methods of preparation and use of large welded (sections) rods, includ-
ing grids, skeletons, and blocks. 156 pages, 104 photographs, bound, 20.15
crowns, Praca [Publishing House],
Technologie strojirenske vyroby I-Montaz atroju, svarovani, nytovani (Tech-
nology of Engineering Manufacture I- Machine assembly, welding, and riveting).
Fourth volume of the translation of the Soviet encyclopedic handbook "Muhino-
stroyeniye," devoted to the technology of machine assembly, metal welding, and
the manufacture of steel constructions. 372 pages, 603 photographs, bound, 27
crowns, SNTL.
Uplna mechanisace syarovani (Complete !Mechanization of Welding). Various
methods of mechanization of welding in the production of steel constructions,
boiler and machine construction, tubing, locomotives and other types of engi-
neatg products, modern high-performance welding methods, and mechanization of
soldering. 96 pages, 60 photographs, unbound, 6.65 crowns, SNTL.
Pechovaci svarovani plamenem (Pneumatic Torch Welding) by T. A. Vladimirskiy
and A. S. Falkevich. Construction and activity of feed sources, welding machines,
burners, and special equipment for pneumatic torch welding, technology of pneumatic
welding, suggestions for the control of the quality of welded seams, and basic
safety precautions. 112 pages,'75 photographs, unbound, 8.80-crowns, SRPL.
Rychlostni zpusoby rucniho svarovani elektrie v obloukem (Rapid-lbthods of
Manual Electric Are Welding) by V. S. Volodin and X. G. Eholovinteev. Welding
by meals *f large diameter electrodes, doubled electrodes, and welding with deep
heating (zavar).' Detailed analysis of innovator-welding work methods. 32 pages,?
24 photographs, unbound, 1.71 croons; SNT'L.
. t,
Zvaracsky sbornik 1953 (1953 Welding Almanac). Collection of the Slovak
Academy of Sciences and Arta, Volume II, No 1-2. 219 pages, unbound, 32 crowns,
SAVU.
Zvaracsky abornik 1952 (1952 Melding Almanac). Collection of speeches and
discussions at the first national conference of welders. 520 pages, unbound,
47.50 crowns, SAVU.
St-face Treatment
Zaklady galvanotechniky (Principles of C-alvanotechnology) by J. Doskar.
Essentials of the electrochemical method, legality of the electrolytic extrac-
tion of metals. The practical part is concerned with the best known galvanic
baths, including electrolytic oil-removing baths, and copper, zinc, brass,
el, and chromium baths. 284 pages, 51 photographs, bound, 24.50 crowns.
Syn Porovite chromovani strojnich soucasti (Porous Chrome-Plating of Aach!ne
Parts) by K. S. Goncharenko. Mefhods of porous chrome-plating of steel machine
parts, basic electrochemical notes, the-method of applying a porous chrcedum
coating, vorksbop equijcannt-for porous -chrome -platiug, the e2getrolyte ccmpe-
sition, defects of electrolytic chraee-plating._ 68 pages, 44 photographs, un-
bound. 4.56 crowns. SY'L.
Sanitized Copy Approved for Release 2011/04/11 : CIA-RDP81-0028OR000200040007-5
 Sanitized Copy Approved for Release 2011/04/11 : CIA-RDP81-0028OR000200040007-5
STAT
Oxydovaui a fosfatovani kovu (Oxide and Phosphate Coating of Metals) by
A. M. Yemnolskiy. Methods of oxide and phosphate coating by which iron and
nonferrous parts and articles are protecteu against corrosion, characteristics
of the individual -nethods, description of operation and work conditions. 6~~3
pages, 17 photographs, unbound, 4.18 crowns, SNTL.
Nitridovani, povrchove tvrzeni oceli duaikem (Nitriding, Steel Surface
Hardening by Nitrogen) by Ye. Koretakiy. Theoretical bases and description of
work operations in nitriding; survey of nitrided steels preceding dressing of
products, equipment for nitriding and special nitriding work. 224 pages, 105
photographs, unbound, 16.70 crowns, SNTL.
Technologie amaltovani kovovych vyrobku (Technology of Enameling Metal ?ro-
ducts) by V. Ye. Lokahin. Collective survey of raw materials and auxiliary
materials for enamel production, melting and firing enamel furnaces, technology
of enamel production, and euameling of steel and cast-iron products. 352 pages,
113 photographs, wound, 26.80 crowns, SNTL.
Voda v povrchovcm zuslechtovani kovu (Water in Su;-face Metal Refining)
by J. Nosek and A. Petro. Various methods of surface heat treatment of me-
tals which result in waste water, the composition and properties of thus waters,
their cleaning, neutralization and economic use of valuable materials contained
in them. 92 pages, 22 photographs, unbound, 6.08 crowns, SNTL.
Zaklady technologie emal.tovani (Principles of Enamel Technology) by
A. Novotny. The physical chemistry of various systems and the testing of
enamels by their mechanical, thermal, optical, and chemical properties, and
the problems of enamel adherence to metals are discussed in the theoretical
part. The technological part includes a description of basic raw materials
and domestic production. 344 pages, 109 photographs, unbound, 54.35 crowns,
SNTL.
Prozatimni predpisy pro zkouseni fosfatisachich pripravku a foafatovych
vrstev (Provisional -Prescriptions for Testing Phcaphate Solution and Phos-
phate Coating). Prescriptions for testing-phosphate preparations, for their
control and to determine whether they fulfill, their function, such as pro-
tecting parts against corrosion. 20 pages,?4 photographs, unbound, 1.52
crowns, SNTL.
:ioren. oceli a litany (Steel and Cast Iron Pickling) by J. Bones and M.
Jaros. Theoretical bases for pickling steel and cast iron, surface prepara-
tion before pickling, pickling technology, chemical control and filling of
the bath, surface treatrent after pickling. 252 pages,.80 photographs, bound,
20.40 crowns, SNTL.
Zvyseni meze unavy kuiickovanim (Increasing Fatigue Limits by Shot
Peening) by J. Shon, Theory of shot peening and its results, description of
shot peening mrchines, r -mplcz of t' nract.cal use and control of this sim-
ple method for the incr.using of fatigue limits of machine parts. So pages, 59
photographs, unbound; 5.32 croons, SNTL.
Boj proti rezaveni kovu (The Struggle Against Rust) by J. Teidl. Prac-
tical suggestions for metal protection against corrosion by means of metal-
plating, phosphating and painting. 88 pages, 36 photographs, unbound, 6.64
crowns, SNPJ..
 Sanitized Copy Approved for Release 2011/04/11: CIA-RDP81-00280R000200040007-5 wing of Is-
chine Parts) by V. 0. Voyshko. A method of machining part surfaces by interior
and exterior rolling. It treats the main phenomena occurring in metal during
its deformation, the influence of heat on surface strengthening, the shape of
the roller and its influence on the surface working of parts. 92 pages, 59
photographs, unbound, 7.60 crowns. Slit.
Elektrojiskrove zpevnovani kovovych povrchu (Electric Spark Strengthen-
ing of Metal Surfaces) by 3. N. Zolotykh. A method of prolonging the life of
tools, shaping tools, and machine parts, corstruction of instruments for the
electric spark strengthening of metal surraces, work methods, conditions, and
achieved results. 48 pages, 21 photographs, unbound, 2.28 crowns, SNTL.
Science of Metals ant Other Materials and Their Testing
Uvod do theorie kovu (Introduction to the Theory of Metals) by Ye. I.
Frenkel. Collection of lectures about the electron theory of metals, mole-
cular kinetic theory of solids and liquids with special regard to metals, and
phase changes in metals and alloys. 200 pages, 94 photographs, bound, 29 crowns,
SIITL.
Technologie kovu I (Technology of Metals I) by A. N. Gladilin and N. P.
Dubinin. A survey introduction to materials used in engineering production.
It includes data on the properties of metals and alloys, on the production of
pig iron, steel, nonferrous metals and nonmetallic materials, their properties
and use. 224 pages. 76 photographs, bound, 26.4(: crowns, SYTL.
Ocel (Steel) by V. Jares. Principles of iron metallography, commentary on
the structure and properties of steel, their heat processing, and individual
types of steel which are classed according to use and alloys. Fifth edition,
112 pages, 27 photographs, unbound, 5.89 crowns, SNTL.
Prehled technickych materialu (Survey of Technical Materials) by Ye.
Koretskiy. Survey of information on technical materials used in the metal
industry (steels cast iron, nonferrous metals, and nonmetallic materials),
brief commentary on their properties, productions vorking methods., and use.
A surrey of Czechoslovak and Soviet standards. 454 pages, 100 photographs,
bound, 33 crowns., SNTL.
Metalograf icke tabulky (Metallographic Tables) by VL Koshelev. Tables of
individual types of the structure [composition] of metal, containing photographs
of basic structures and some extraordinary cases. The textual part explains in
detail individual photographs and schematic drawings. 72 pages, 61 tables., un-
bound, 29.05 crowns, SNTL.
Zaklady metalografie oceli (Foundations of Metallography) by Vi. Koshelev.
Basic theoretical notes on the internal structure of metals and alloys. The
book conttins the experiences accumulated by the author in the course of long
years of practice in the "Lento" Works in Plien, especially on the questions
of the change of the internal structure of metal during the production process.
246 pages, 278 photographs, bound, 23.75 crowns, SNTL.
 recognizedaccording to the appearance and structural changes present in breaks
Sanitized Copy Approved for Release 2011/04/11: CIA-RDP81-00280R000200040007-5 was, SNTL.
Spektralni analyse kovu a slitin I (Spectrographic Analysis of Metals and
Alloys I) by V. K. Prokof'yev. The function of spectrog aphic instruments, the
description of the most common types of spectrographs, light sources, and elec-
trodes for spectral analysis, microphotometry in the aertui%mment of spectral
marks, and auxiliary instruments for spectral analysis. 31o pages, 160 photo-
graphs, bound, 30 crowns, SNTL.
Spektralni analysa kovu a slitin II (Spectrographic Analysis of Metals and
Alloys II) by V. K. Prokof'yev. Various method, of determining rated inten-
sities which are the substances of photometr=c measurement of photographic plates,
and various spectroanalytic methods. Organization and equipment of factory
spectrographic analysis laboratories, tables for analysis of metals and alloys.
272 pages, 54 photographs, bound, 27.20 crowns, SNTL.
Zaklady metalurgie zeleza (Bases of Iron Metallurgy) by 0. Quadrat. Des-
cription of a blast furnace and its equipment, conmentary on the production of
various types of pig iron, description of an open-hearth furnace, steel pro-
duction by acid and basic Martin processes, casting of steels, production of
electric sc:eels and malleable cast irons. Important data on Czechoslovak and
Soviet steels. 336 pages, 88 photographs, bound, 36.65 crowns, SNPL.
Prirucka pro ucitele nauky o materialech (Handbook for the Instructors of
the Science of Materials) by M. K. Samusenko. A methodical help for the teacher
in crafts, railroad schools, trade schools, and plant training schools. 90 pages,
28 photographs, unbound, 4.75 crowns, Prace.
Nauka o materialoch (Science of Materials) by D. 0. Slavin and N. N. Os-
tapeuko. A handbook for metalworktri.. The book progressively analyzes the
basic properties of all raw materials used in metal industry plants. 216 pages,
149 photographs, unbound, 9.80 crovns,;SNTL.
Vlastnosti kovu (Properties of Metals) by D. 0. Slavin. A popular ca?sen-
tary on basic knowledge of metals, shaving the structure of zetela and alloys,
their physical properties, metal pressure resistance, toughness, hardness, and
other mechanical properties of metals, and resistance to corrosion. 48 pages,
23 photographs, unbound, 3.04 crowns, SNTL.
Mechanicke zkouseni kovu (Mechanical Testing of Metals) by N. A. Shaposh-
nikov. Collective survey of the static testing of metals, tests at various tem-
peratures and speeds of the defotmatiot; of metals, methods of ascertaining hard-
nesi, and testing metals for fatigue [induced] in load changes. 4C4 pages, 301
photographs, bound, 37 crowns, SNTL.
llsterialove listy uslechtilych konstrukcnich oceli k suslechtovani (Material
Lists of Refined Construction Steels for Heat Processing) by Fr. Sicha. Re-
sults of research work of the "Klement Gottwald" Ironworks in Vitkovice and the
Steel Research Institute (Ocelarsky vyskumny ustav), the aim of which was to
find the possibility of a more economical use of alloy elements, chiefly nickel
and molybdenum, in strengthening of construction steels. 24 pages, 5 photo-
graphs, unbound, 9.12 crowns, SNT!..
Sanitized Copy Approved for Release 2011/04/11 : CIA-RDP81-00280R000200040007-5
 Sanitized Copy Approved for Release 2011/04/11 : CIA-RDP81-0028OR000200040007-5
Chemicke slozeni oce11 normovanych v CSR a v cizine (Chemical Composition
of Steels Standardized in Czechoslovakia and Abroad) by R. Stefec. Tables of
the chemical composition of steel standardiPd in Czechoslovakie., the USSR, Swe-
den, Germany, England, France, and the US, and comparison of foreign steels
with Czechoslovak state standards and steals produced by the United Steelworks?
national enterprise. 228 pages, 146 tables, unbound, 13.30 crowns, bound,17.85
crowns, SNTL.
Nastrojove oceli (Tool Steels) by J. Walla. The book gives examples of
proven methods of beat processing of tool steels and the production of various
types of tools. 470 pages, 570 photographs, bound, 44.10 crowns, Prace.
Slitinove konstrukcni oceli (Alloy Construction Steels) by V. Walla.
A series of notes which deal with the influence of copper, aluminum, lead, ar-
senic, and the other elements, on the properties of steel and its production..
The author considers various types of beat processes ouch as annealing, reliev-
ing internal stress, and tempering. 344 pages, 404 photographs, bound, 65.75
crowns, Prace.
ZakIbAy,prakticke metalogrtfie oceli (Bases of -Practical- Jlbtalldgraphy of
Steels) by 7. Valla. The author presents a cos entary on various defects of
steel, investigates reasons and'cir"casstances for their occurrence, shove how
to reduce losses, rejects and bad sanufactures. 252 pages, 324 plbtbgrnphs,
unbound, 21 crowns, Prace.
Snadno obrobitelne oceli (Easy Machining Steel) by V. Walla. The author
makes a suggestion for the choice of the best steels for machine working, and
proper use thereof, and for work and technological advance in economical ma-
chining. 216 pages, 290 photographs, unbound, 24.35 crowns, Prace.
Materials Economy, Struggle Against Corrosion
Theorie a zkuaebni methody korose kovu (Metal Corrosion Theory and Testing
Methods) by G. Y. Akimov. This book, by a "Stalin Prize" winner, concerning
the theory of metal corrosion, especially electrochemical corrosion, describing
corrosion testing methods including laboratory, and electrochemical, and test
methods under natural and production conditions. 372 pages, 373 photographs,
bound, 104.30 crowns, SNTL.
Korose a ochrana proti korosi (Corrosion and Protection Against Corrosion).
Results of polarograpbic and electrochemical study of the corrosion of some me-
tals and results of the study of surface protection (phosphating, siliconizing,
and zinc-coating). 68 pages, 25 photographs, bound, 9.50 crowns, SNTL.
Korosni sbcrnik (Corrosion Almaanc). The work of a collective at the Re-
search Institute for the Protection of Materials (Vyzkumgy ustav ochrany ma-
terialu) contains in tabularfbrm a summary of info:'ation on the reaction of
materials to various chemical conditions. 536 pages, unbound, 78.30 crowns,
SNTL.
Prirucka pro avarovaci technology;-komrtx'uktery a avarece I.-II. -III.
(Handbook for Welding Technologists, Builuers, ana welders I. -II. -III.)
by Faltus. [no other data given].
Sanitized Copy Approved for Release 2011/04/11 : CIA-RDP81-0028OR000200040007-5
0 -