SCIENTIFIC ABSTRACT BANZBURG, S. B. - BARA, B.

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP86-00513R000103420004-7
Release Decision: 
RIF
Original Classification: 
S
Document Page Count: 
100
Document Creation Date: 
November 2, 2016
Document Release Date: 
June 9, 2000
Sequence Number: 
4
Case Number: 
Publication Date: 
December 31, 1967
Content Type: 
SCIENCEAB
File: 
AttachmentSize
PDF icon CIA-RDP86-00513R000103420004-7.pdf1.95 MB
Body: 
YU D.S., professor w1pidemic infantile paralysis"' "81"Bausbus Kopelevich, S.M. q 0.. 1 Reviewed by D.S.Futer. Pediatrila no-305TW*49 155 (MLRA 8:10) (POLIOMMITIS) '.'(GAMURG, S:I.) (EDPAMICH, S.M.) STURMAN, A.V., voter. vrach (Strasherskiy rayon, Moldavskaya SSR); BUIPWOV) Yu.N., voter. folldsher (StMshanskiy rayon, Moldavskaya SSR); KAL).: NITSKIY, P.I., voter. vrach (Strasherskiy rayon, Moldavskaya. SSR); OCHAKOVSKIY, Z.M., voter. 1,rach (Strashenakiy rayon, Moldavskaya, SSR); GOTSENOGA, A.D. (Strmhenskiy rayon, Moldavskoy SSR); ABRAM- YAN, G.I., voter, vrach; M M TIYEV, M.G., voter. felldsher (s.Shi- roz1u, Vedinskogo rayona Armyanskoy SSR); KIRAKOSYAN, A.A., voter. vrach; GEORGIYEV, Yu.P., voter. vrach-, LOMAKIN, A.M., nauchnyy so- trudnik; SHMLEV, L.A., voter. vrach.; TARASOV, I.I., assistent; ROMASHKIN, V.M., voter. takhnik; ANDRIYAN, Ye.k.; BARTENEV, V.S.; KOROLI, Ye.I., voter. tekhnik; YEROSHENKO, A.K., aspirant; BANZEK, It P- SARAYKIN, I.M., prof.; ZIIEVAGIN, A.N., vetAr. vrach; BIUTI- YANOV, D.D.1, voter. vrach (Klimovichskiy rayon, Mogilovs~qy oblas- ti BSSR); SHALYGIN, B.V., voter. vrach (Klimovichskiy rayon, Mogi- levskoy oblasti, BSSR); RYABOKON, G.T., voter. felldsher; ?.-'OVSUM- ZADE, KoKo, prnlr.-, DUGIN, G.L., aspirant; TITOV, G.I., nauchnyy sotrudnik; MEDVEDEV~ I.G,, veter. vrach.; AJJMYEV, VA,.; ALLENOV: O.A.8 veter.vrachr: Prophylaxis and treatment of noninfectious diseases in calves and piglets. Vaterinariia 40 no.2:40-47 F 163. (MIRA 17:2) 1. Ullyanovskaya. oblastnaya veterinarno-bakteriologicheskaya labo- ratoriya (for Sturman). 2. Kolkhoz Imeni Kirova. Volnkonovskovo (Continued on next card) BACa,Istvan, fofelugyelo (Budapest) International aspects of the new timetable in use. Vasut 15 no.2:1-2 F 165. 1. Hungarian State Railways. BAPAT9 YA* N*j GAHo TECH SCIt OF SEMI- CONDUCTOR CURRENT SWITCHES USED IN HIGH-SPEED C:OMPUTER4* Moscow, 1960. dMIN OFJiIOHER AND SEC SPEC ED RSFSR, Mos- COW ORDER OF LE_N_l_W,",-bft~84WvlNST)* JKL9 2-61t 207). S/105 ,/60/000/06/17/023 B0141BOll AVTHORSz Bapat, Ya. N.0 Kaganov, I. L. PC/ TITLEt A Quiok-acting Semiconductor Switch and Trigger for Electronic Computers PERIODICALs Elektrichestvo, .1960,1ko. 6, PP. 76-81 TEXT: In the introduction the acceleration of the computing process is referred to as one of the principal problems facing electronic computers. The velocity of such process depends on the duration of the pulse fronts of input and output voltages. The duration of the fronts depends on the saturation of the triode bases, and a circuit with acceleration capacities was suggested (Ref. I)p which does not permit saturation. With a view to preventing saturation, a circuit operating on an unsaturated basis was suggested. This circuit is shown in Fig. 1. Here, the triodes, T1 and T2 are linked with the current source by way of the emitter circuit. This circuit was developed by.H. S. Yourke (Ref. 2). The function of this circuit is discussed and it is stated that due to the Card 1/5 A Quick-acting Semiconductor Switch and S/105/60/000/06/17/023 Trigger for Electronic Computers B0141BOll absen'as of saturation this trigger is an excellent current switch. The circuit offered here cannot be used directly in computers, in which the circuits are grouped. Fig- 3 shows such a type of circuit, that can be applied to computers, and the function of the circuit is discussed in detail. The large number of current sources of this circuit is con- sidered to be a drawback; this number can be reduced to 1, if the circuit of Fig. 4 is used. M. M. Samokhvalov and N. 3, SpIridanny Are mentioned in the following discussion of the operating speed of the circuit (Ref. 3). Formulas are given for the calculation of the circuit elements, and the circuits with two voltage sources (Fig. 3) and with one voltage source (Fig. 4) are dealt with separately. Oreof the main characteristics is said to be the load-carrying capacity, i.e. the one depending on the number of input and output signals, in which a stable operation is pos- sible. The circuit shown in Fig. 7 is investigated. Experiments made on the switching speed show that the duration of pulse fronts rises with increasing number of triodes connected in parallel. This is related with an increase in the output capacitance. The temperature stability is shown in the diagram of Fig. 10. By introducing a feedback between the keys in these circuits, one obtains a trigger. Such a trigger is shown /C Card 2/3 A quiok-acting Semiconductor Switch and S/105/60/000/06/17/023 Trigger for Electronic Computers B014/BO11 in Fig. 11. Its advantages are briefly discussed. There are 11 figures and 4 referencest 2 Soviet and 2 kmerican. ASSOCIATIONs Moskovskiy energeticheskiy institut (Moscow Institute of Power Engineering) SUBMITTED: March 10, 1960 V/C, Card 3/3 J 318 S/194761/000/010/029/082 D222 D301 AUTHORS: Bapat, Ya.N. and Kaganov, I.L. TITLE: Current-switching logical elements PERIODMAL: Referativnyy zhurnal. Avtomatika i raclioelektronilca, no. 109 19619 32, abstract 10 B210 (Tr. Mosk. energ. in-ta, 1961, no. 34, 5-15) TEXT: Typical logical units, triggers and half-adders built with transistors of the alloyed and drift types are described. The calculation of these circuits is given. Experimental investi- gation of these elements have shoxm that the supply voltages can vary within t 1576 individually, without influencing the duration of the front or the delay, if the other voltages are kept constant. The pai:ameters of elements have been found which can give high stab- ility and speed in computers, enabling a switching speed of 5-10 me/s to be reached when n-402 (P-402)-type transistors are used, Card 1/2 31827 S/194/61/000/010/029/082 Current-switchiug logical elements D222/D301 and 500 kc/s writh the n-11 (P-11) and n-15 (P-15) transistors. 6 M-Tures. 6 references. Z7Abstracter's note: Complete transla- I tion.7 Card 2/2 LAPIN, V9, arkhitektor; BAPISHEV, Ch.,. arkhitektor Planning residential sections -in Alma-Ata. Zhil. stroi. no-7:14-16 159. (MIRA 12:10) (Alma-Ata--Gity planning) BASENOV, T.; BAPISHEV, Ch. Development of the cities and towns of Kazakhstan. Zhil. stroi. no.8:16-18 162. (MMA 15:9) 1. Zamestitell Predsedatelya Gosstroya Kazakhskoy SSR (for Basenov). 2. Rukovoditell sektora Kazakhskogo filiala Akademii stroitel'stva i arkbitektury SSSR (for Bapishev). (Kazakhstan--City planning) 13 Iq P -rI3 t9 /'J' L) V L . N V, BABIKOV. ie.A.. pidesnor; KOMO - DOLGINOV. A.I., retsenzent, H.S.; SIRST9Y. A.S.; AKOFTAN, A.A., reteensent; BAPTIDANO V_4"~~tx* , redaktor, LTextbook on high voltage technology] Tekhnika Tysokikh napria- zhenii. Pod. red. M.A.BabikOTa. Roskya, Gos. energ. izd-vo. 1947. 312 p. MRA 7:4) (Blectric engineering) BAPTIDANOV, L.N. Blektrooborudovanie elektricheakikh stantaii i podetantsJi (Electrical equi;=ent of electric stations and substEtions)- V 3-kh t. Izd. 2-e, perer. Moskva, Goeerergoizdat. Vol. '2. Releinaia zashchita i osnovnye evedeniia ob av6imaticheskom vkliuchenii linii i transformatorov (Protective relays and basic informntion on thF, automatic connection of lines and transformers). 1953- 159 P. SO: Monthly List of Russian Acceezions, Vol 7, No. 8, Nov. 1954 Ofi PTI -D ti N 0 V Subject USSR/Electricity AID P 13o4 Card 1/1 Pub. 27 - 28/3o Author : Baptidanov., L. N... Kand. of Tech. Sci., Dotsent, Moscow Title : Book Review: Historical outlines of power engineering in the USSR. Monographic historical studies edited by the Moscow Power Engineering Institute im. Molotov, published by the State Power Engineering Publishing House, 1954. Periodical : Elektrichestvo, 1., 85-86, Ja 1955 Abstract : The author reviews 9 of the series of 32 monographs planned and emphasises the importance of this publication. Institution None Submitted No date UGOMS. I.I.;.GLAZUNOT. A.A.; SYRDXYATNINDV, I.A.; KASHUNIN, I.S.; POSTRIEDV, N.A.; RljWSIG, V.A.; TJTaIYADDV, S.A.; WMINSKIY, P.G.; VASILITXV, A.A.; WVSHINSXIT, M.N.; 3MI ; TARASOV, V.I.; KRIKUNCHIK, A.B.; SHOW, A.B.; BIBIMV, IVII-V ".DV HIM, L.I.; KLINGOF, I.D.; KARPOT, M.M.; USPERSKIT, B.S.; CHALIDZE, I.M.; BWOR, Ta.A.; SHMOTKIN, I.S. lesif "'Tlevich ,=in; obituary. Blek.sta.26 no.12:58 D 155. (Gumin, losif IAkovlevich, 1890-1955) (WRA 9:4) '::~ - ,, PTPANQV.~ 7, 1 olayevich; TARASOV, Vladimir Ill ich; MUDZUBMSKAYA, ."'. '. - - - -* 0 . ~ .--.I - ., tekhn. red. (Electric stations and substations] Elektricbesk-ie stantsii i nodstantsii. Moskva, Gos. anerg. ird-vo. 1958. 464 p. (Electric power distribution) (HIRA 11:3) FRm i BooK ExpLoiTATioN sov/4748 Baptidanov. L. N., and V. 1. Tarasov Elektrooboradovaniye elektricheskikh stantsiy i podstantsiy; v dvukh tomakh, Tom 2: Skheny elektricheskikh soyedineniy. Sobstvennyye nuzhdy. Fasprede-. liteelIny.ye iistroystva. Kontroll., upri~vleniye i signalizatsiya. Zazemleniye (Electric Equipment of Electric Power Plants and Substations; in two volumes, Vol. 2: Diagrams of Electric Connections. Auxiliaries. Distributing Equip- ment. Checking, Control, and Signaling. Grounding) 3d ed., rev. Moscow, Gosenergoizdat, 1959- 320 P- 85.,000 copies printed. Ed.: Ye. D. Demkov; Tech. Ed.-. 0. Ye. Larionov. PURPOSE: The book has been approved by the administration of educational, methods for secondary specialized schools of the Ministry of Higher and Secondary Specialized Education USSR'as a textbook for students in power-system tekhnik- ums. It may be tsed as a iextbook for students in schools of higher technical education when this course is not a major subject. The book may also be use- ful for medium-level technical perscmnel of electric power stations, substations, and networks. Electric Equipment of (Cont.) SOV/4748 CaVEFAGE: The book discusses electric-connection diagrams, problems of station and substation amdliaries., the construction of indoor, outdooryand factory- assembled distribiltion systems,, transformer substations, and determination of the operating eummit. The authors present basic information on relay protection and cn electric automation, discuss the checking and measuring systems, control, signalling and block-Ing systems. They present data on the grouping of basic egi.,dpment of electric stations and substations and describe the installation and computation of groundings. In the second edition of the book a third vol- ume was devoted to problems of relay protection and automation. Recently two tekhnikum-level textbooks were published dealing with the following subjects: "Pvele~ma,ya zashchita" (Relay Protection) by N. V. Chernobrovov; and 'Isistem- naya automatika" (System Automation,) by A. B. Barzam. However, the use of these textbooks may create difficulties for people who have had no introductory coi:rses in this field. For this reason the authors included basic information on relay protection and automation in the 2nd volume. Sections 1 to 6 in Ch. VI.) Section 2 in Ch. XI.p and Ch, XXI. 'were written by L. N. Baptidanov; the re- maining text, was written by V. I. Tarasov. No personalities are mentioned. There axe 46 references, all Soviet. Gar#aAI;O' 3MMANOT. Ley ftIWUWevUh;,TARASOT9 Vladimir Illich; IMM, Te.D., red,; AUNOV, [Electric equipment of electric power plants and substations in two volumes] Slaktrooborudovanie alektricheskikh stantaii i pod- stanteli v dvakh tomakh. KoskvA, Goo.anarg.isd-vo. Vol.l. (Basic electric equipment of electric power plants and substations] Ounoynoe alektrooborudornale elaktricheakikh otantaii i podstantoii. Isd*3*, parer, 1960. 400 v, (MM 13:6) (Electric power plants) (Electric substations) ~APTIDANOV,. Ja.'y. Pikolayevich, kand. tekhn. nauk; VASILYEVA, Antohina Pavlovna) asuiBtent [Manual on the induatrial training of students of electric power engineering departments in a trd ning power plant) Po- sobie po proizvodstvemomu obuchenAu studentov elektroener- geticheskogo fakul'teta. na uchebnoi elektricheskoi stantsii. Moskva) Energet. in-t. No.3. 1961. 74 p. (MIRA 17:2) SHMITY-T, GJ,.; LAPTIDANOVAY YU.P. Characteristics of the growth ans devclopment of the blastocyst and trophoblastic vesicle in the cow and sheep. Dok2. AN SSSR 160 no.1:246.-248 Ja 165. (KMA IS: 2) Institut morfulogii zhivotnykh im. A.N. Severtsova AN SSSR. Submitted May 6, 1964. BAPTI'T---L,'SYIY, V. I. 42512% BAPTIZKOSKIY. V. 1. - K vopprosu c rez' ~me ck-hla,--h`~-;- '-suc'.. n - --n-t-- i=. St-2irn). T!'P. 14'. i94P. s. 4,:z-6-2- E.41.-Iic.-r: ~-Dneprcpetr. z . 11 nazv. SO: Letopis' Zhurrr--Vnyk~~ St--~tev, Vol. 47, 1948. v 189T70' Jul 51 "Destructioii-of Ingots Under Thermal Stress," V. I. Baptiimanskiy "Zhur Tekh Fiz" Vol M , No 7, pp 822-831 Finds by analysis of stressed state appearing in ingots durLig cooling and heating that thermal des- truction occurs by tearing. Suggests method allow- ing computation of limiting range of temps and speed of cooling and heating of manufd articles. Submitted 10 Jun 50. LC Answer to I.SJulikov's review. Ukr.khim.zhur. 19 no. 4: 457-460 153. (nU 8: 2) 1. Dnepropetrovskir wtallurgicheskiy institut im. I.Y. Sta- lina. (Heat of solution)(Ilectrolytes)(Kulikov, I.S.) 715~ 7--,.~ BAPTIZKA W IT, V.I. Solubility of electrolytes. Ukr.khlm.zhur. 20 no.5:487-495 154. (MIRA 8:1) 1. Dnepropetrovskiy motallurgicheakI7 institut. (3lectrolytes) (Solubility) 0b fiazii6 :~A -1 ~ I my - I A KUZ14ETBOV, M.P.:; FJIMIS, G.N.; POIMStEX0, I.G.; I-RWIK, T.A.; YMGIK, B.I.; BAWIM"Sny, V.I.; SWOCHAN, N.G.; PMRAYW, B.L. .Research-carried on at Ag 156o (Dneprodzerzhinsk--Metallurgy) the Dzerzhinskit Plant. Stall 16 no-B'.749-750 (mm 9: 10) V'S P, . T V1 V1 -s AUTHOR: Prosviri-n, K.S. and Baptlzmanskiy, V,I., Dnepropetrovs J35 Metallurgical InstifuMe-~,a ~zi~Ljso;T, M.P. and Umxlov, V.D., Dzerzhinskii Works. TIM,: Use of magnesium in converter-steel production.(Primenenie magniya pri proizvodstve konverternoy stali.) PERIODICAL: Vetallurg't (Metallurgist) 177,-No. 1, pp. 16 - 17, tU.S.S.R.) ABSTRACT: Works trials at the Dzerzhinskii bessemer shop aimed at improving the plastic properties of converter rail steel by treatment with maTesium are described. The magnesium alloy (64% Sip 11.8% MS partially or fully replaced the 45% ferro- silicon, used for deoxidation in the ladle, to give the reqaire~ silicon content. 20 or 60 kg of silicomagnesium were added to various heats, weighing 22.5 tons each. The introduction of magnesium to the liquid steel was found to give.a finer grain size, reduce the size and quantity of non-metallic inclusions and the sulphur content, appreciably improve elongation and reduction in area, and give steel with a toughness approxim- ating to that of O.H. steel. 3 tables, 1 graph. t 'Y~ BAPTISI-IM43 U - , OGRUM, -Gob. "Experience of the Oxygen Congerter Refining of Phosphor Cast-Iron," lecture given at the Fourtb Confernce on Steelmaking, A.A. Baikov Institute of Metallurgy, Moscow, July 1-6, 1957 BAPTI~MANSgY,-V.L- --- ~ -- 14echanism and Kinetics of the Converter Bath Processes," lecture given at the Fourth Conference on Steelmaking, A.A. Baikov Institute of Metallurgy, Moscow, July 1-6, 1957 137-1958-1-357 T;anslation from. Referativnyy zhurnal, Metallurgiya, 1958, Nr 1, p' 55 (USSR) AUTHOR: Baptizmanskiy, V. I. TITLE: Mechanism and Kinetics of the Processes in a Converter Bath (Mekhanizm i kinetika protsessov v konverternoy v~4pne) PERIODICAL- V sb. -. Fiz. -khim. osnovy proiz-va stali. Moscow, AN SSSR, 1957, pp 28-41. Diskus. pp 160-187 ABSTRACT: Simulation of a converter blow using water, Hg, and aqueous salt solutions as the liquid shows that when the blast exceeds one atmosphere gage pressure the air enters the liquid as a stream that takes up the liquid to form an emulsion. Under the conditions obtaining in a converter, the emulsified drops of metal oxidize to form drops of FeO and, intermixing with the mass of metal, scatter [0]. Simultaneously, the stream is broken up with bubble formation, and these promote circulation of the liquid. It was found under industrial conditions that the slag is taken up and emulsified in the stream along with the metal. An investigation of nonmetallic impurities in the metal conducted during the blow re- vealed that at the beginning these consist of silicates with elevated Card 1/2 Fe oxide contents, testifying to the primary oxidation of Fe. Then 137-1958-1-357 Mechanism and Kinetics of the Processes in a Converter Bath the quantity of these nonmetallic impurities -declines and the amount of dispersed silicates increases continually until the end of the blow. This is explained by the entry of additional nonmetallic im- purities into the metal due to the breakdown of the slag. A relation- ship has also been established between the Sioz/FeO ratio in the nonmetallic impurities and the Si/Mn ratio in the pig iron. Sim- ulation of the process with oil in place of the slag showed the de- pendence of the amdxint:of emuli'ified'oil-,dr! its viscosity. An investigation of the~klnetics of CIoxidation under laboratory con- ditions showed that at bath temperatures of appx. 12500 the chemi- cal reaction does not limit the process of C oxidation. Measures to diminish the gas saturation and contamination of Bessemer steel with nonmetallic impurities are examined. E.T. I. Stael--14anufaetwe 2. I'anseinor Card 2/2 TARX&VSKIT, I.H.; MIKHikYlIKOV$ S*V., bind. tekhn. nauk, darshiy nauchrqy sotrudnik; BAMMURSKIr, V.I. kvad.takhn. imuk, d6ts.; laffiff, - :ZZU . 3,L,, prof,j do WAU.; OUSg GJ6. prof,,, doktor teldm. sauk;' GMIR, Me.; BIGBYW, A.M., kand.- t .akh. nauk. do+.s.;' LIPSHITS, J, I., kand. takhn. POLTMOV, A.Tu., kaA4. tgldm.' nauk, atarshiy nauchWy sotrudnik; 701PANOr, 4.A., kDad. takhn. nank, starshiy nmh- W sotimidal ~ OGRTZKIN, To X~; GONCHUMO9 N.I., kand, tekhn. nauk; ABRAMOV. 13.A-.-: nauchMy sot;7d;ik; )ULlNbVWIT, V.G.~;. LAPOTYSEEKIff, N.M., 1-d. likhn. muk; APANAS'Ylff, S.G., kand. tekhn. nauk; SMMOVO M.N., starshiy nauebW sotrudnik; IYANOV, Ye,*V.; SPSWWN. Z.D., starehiy nauchrVy soty-adni Discussions. Blul. TMIG11K uo*IB/19-.107-119 157. (KM~ 11:44 1. lbcbal In-ik born tnogo teekha Orsko-Khalllovekogo kombinata (for rarnavokiy, 2. listitut metallurgii Urallskogo filiaU AN SSSEL (f or Mikbaylikov,.Abismorl- 3. r4rektor Ukrainakcgo inatituta metallor (for Goicharank0ek Daepropetrovikly metallwgicheakir institut (for Baptizmask-iy', Ievin). 5. ZavediWmLhehi7 3mfedroy metallurgii stali Hoakovskogo inatituta stali (f Oyie). 6. Za- veduyushohiy laboystori7ey Tendkiy"skogo wtan7#gUheskogo tokbnikvma (for Gerber). 7. Wedra metallurgii4itimli Magnit-ogor- skogo gorno-metallurgicheekogo instituta,(for Bigeyev), 8. Rmko- boditell konverternoy gruppy TSBUtTeLln0y 2avodskoy laboratoril savoaaim, Petrovskogo (for Xfshits). 9. ~lnetitut metallurgii lm.Baftoya AN SSSR (for Pblyakov). (n.. TAMOSKIT, IoN.--(oontinued) Card 2'. 10. UrallsklY institut matallor (for 76fanov). u. institut chernoy metallurgii AN USSR (for Ogryzkin). 12. Nachal lnik'Mentrea ImW zavodskoy laboratorii Tenakiyevalcogo metallurochesko&o savoda (for Malinovskly). 13. Mentralinyy nacubno-issiedovateltakiv inotitut chernoy mtallurgii (for Iapotyshkiz~ Shumov, 3pahtsyli). 14. Nachal Inik konverternoy laboratorii TSsutrallnogo nanohno- iseledovatellskogo institute, ahernoy metallurgii (for Afamelyev). 15, ladhallnik laboratorii Tvasoyumogo nauohno-iseledovatellskogo, instituta ogneuporov (for Ivanor).' (Bessemer process) 1;8 7 AUTHOR: Baptizmanskiy, V. I. SOV1163-1 .11-3/49 TITLE: Investigating the Influence of Some Parameters on the Steel Melting Process in the Converter (Analiz vliyaniya neko.- torykh parametrov na protsess vyplavki stali v konvertere) PERIODICAL: Nauchnyye doklady vysshey shkoly. Metallurgiya, 1958, Nr 3, PP 15 - 21 (USSR) ABSTRACT: The influence of some parameters, the interaction of the gas flow with the liquid, the mixing of the slag with metal etc. were investigated under laboratory semi-technical conditions. When blasting -through the metal melt the influence of various factors on the penetration depth of the gas current is of importance. The investigations showed that the penetration depth of the gas current (X max depends on the blasting pressure, the height of the melting layer(x1 ), the diameter of the melt (d), and the density of the melt. The factors having effect on the penetration depth of the non-adsorbed gas current at a blasting pressure Card 1/4 of > I atmospheres excess pressure and a cylindrical InvestiL,ating the Influence of Some Parameters on the Steel SOV/163-58-3-3/49 Melting Process in the Converter shape of the converter are represented by the followimg, equati on: P1/2d1/2 2/3 max + . X1 Y1/2 (2) dB 2 iqii. The mixing of the slag with metals was investigated at different blasting conditions. It turned out that in the converter. when blasted from belor, small inclucions of the metal melt may be observed. In figure 2 the change of the carbon-, oxygen- and silicon content in the metals during the blowing process is given. From this test series -may be seen that the concentration of the oxygen in the metal constantly increases with the increase of the blasting, and that it takes a jump-like course. In the beginning of the blasting an intense oxidation of manganese and Card 2/4 silicon occurs at the phase boundary. Also a considerable Investi.-ating the Influence of Some Parameters on the SOV/163-58-3-3/49 Steel Melting Process in the Converter impoverishing in silicon occurs, and the oxygen content amounts to 0,002%. In the case of a further increase of the oxygen content a decarburization oc,-ars. Five reactions take place at the same time: Isil + 2(FeO) =(SiO 2) + 2[Pej (PeO) = [Fe] + 101 ls~ + 2 E01. (Sio 2) i- CID] L-~j = tC Olas (Sio 2) + 2 [C] = 2 LCO~gas + IS] During the oxidation period of carbon simultaneously the degassing of the metal melt from CO occurs. During the blasting the solubility of the nitroGen in the moisture of the metallic phase may be found. The amount of dissolved nitrogen in metal is calculated by means of the following Card 3A formula: Investigating t1he Influence of Some Parametora on the Steel Melting Process in the Converter ASSOCIATION SUBMIMD: (pilast PFI%WI' _11A K M Kjj [N)Blast~ N N2 f 100 SOV/161-58-3-3/4" (13) The deDendence of the nitrogen content in the steel on the composition of the blast air . and the type of addition -to the metal melt was investigated. In figure 4 the dependence is shown. The experimental and theoretical data agree well, as by the equation (14) the Eas com- position in the steel and the gas composition in the blast air were given. From equation (14a) may be seen that the concentration of hydrogen in steel does not only depend on the moisture in the blast air but also on its oxygen content. There are 4 figures and 1 reference, ,;hich is Soviet. Dnepropetrovz,'4metallurgiclieskiy.iiistitut (Dnepropetrovsk Metallurgical Institute) October 4, 195',? Card 4/4 AUTHOR: Baptizmanakiy, V. I. SOV/163-56-3-:15/49 TITLE: Metal Ejection From the Converter and the Means of Fighting It (Vybrosy iz konvertera i bor'ba s nimi) PERIODICAL: Nauchnvye doklady vysshey shkoly. Metallurgiya, 1958, Nr 3, pp 81 - 86 (USSR) ABSTRACT: The spaxting out of the metal and the slag from the converter considerably affects the economy and the yield of liquid steel. The cause for this phenomenon is discussed. The experiments were carried out partly on industrial and partly on a laboratory scale. It was found that in blasting through the lower part of the converter the spurting out is caused by the formation of waves which are formed when a certain blowing pressure is exceeded. These waves propagate diametrically and end in the metal melt. The impact of these waves against the converter wall leads to an ejection. Besides, the dependence of the ejection on the level of the metal melt and the construction of the converter bottom was investigated. Card 1/3 The forces of internal friction play an important part Metal Ejection From the Converter and the Ueans of SOV/163-58-3-15/49 Fighting It in the formation of the ejection phenomena. The most effective means to fight the ejection of metal from the converter is blasting in a converter with a bottom in which the blast holes are equally distributed. The boiling state of the metal melt is also of importance for the ejection of metal. This influence is explained by the fact that with an increase of the oxidation rate an accelerated CO-separation takes place. The elimination or decrease of the boiling processes of the slag in the converter also prevents an ejection. In the systems FeO-SiO 25 MnO.-SiO 2 and CaO-SiO2the alumina increases the surface tension and at the same time decreases the tension at the boundary slag-gas. An increase of the SiO2 con- centration in basic slairs accelerates the boiling in the metal melt and promotes an ejection. From the results obtained may be seen that by decreasing the SiO2 content of the melt an ejection of metal from the converter may be avoided. There are 4 figures and 16 references, 12 of which are Soviet. Card 2/3 Metal Ejection From the Converter and the Yeans of SOV/163-58-3-15/49 Figilting It ASSOCIATION: Dnepropetrovskiy metallurgicheskiy institut (Dnepropetrovsk Metallurgical Institute) SUBMITTED: October 4, 1957 Card 3/3 BARIZMANSKIY, V.I., kand. tekhn. nauk, dote.: OGRYZKIN, Ye.M., inth. Investigating the process of injecting oxygen into phosphorus pig iron. Isv, vys, ucheb, say,; chern. met. no,4:11-22 Ap 158, (NIRA 13.2 6). 1, Daepropetrovskly metallurgichaskLy institut i Inatitut chernoy m9tallurgii AN USE. (Bessemer Process) Oxygen- Industrial applioationeY 7-1Z In 6. KOHaEPTEPHOC (WOMBOLICTOO CrAllif A.Phr-u- Pt.nx.s... It.,- NaLikpo. .. . . . ZrI.X-7 yrr- LA.2-6. .4.7roue.-u- us l ~ w~.s .Zr z S" rum auu- Mr.. -"u- C.r."&-o "u-p- MJAJIV- - .-F-. MR u- MR. Wr- TOPOS rulwdtt~A for the 5th Cbndcal ' DM MWO on 8t"1 prodattlao. 30 ,_ 1939. /3 fil9TI ZM, 4 IV 5y, flEMITAMHUCKHR AMISMIMS CTA/Ilf C.H n - a.... ..-.* ~o. . ro K ~. : : ..k C.E.0- AJAX-". nXbr- a.- "PY"YP- C.T.pw~ ot~# ~~U. &.A.yp~ --T St,- IOT.Ar- V.Sjb.- nj4.a.- 4 nn A~ ZT 919. . . . . . ............... . 160) AUTHORS: Baptizma 9-1-6/co Dubrovskiy, Yu, A., SOV/163-.., Lapitskiy, V. I., Poyarkov, A. 11., Rostovtsev, 3, T.t Sesyuk, G. S., Ogryzkin, Ye. M. TITLE: Conversion of High-phosphorus PiC Iron in Oxygen-blast Con- verters (Peredel vysokofosforistogo chuguna v konvertere s kislorodnym dutlyem). Communication I~ ConveTsion of High- phosphorus Pig Iron in a Converter With Combined Lateral Blast (Soobahcheniye I. Peredel vysokofosforistogo chuguna v konver- tere s bokovym kombinirovannym dutlyem) PERIODICAL: Nauchnyye doklady vysshey shkoly. Metallurgiya, 1959, Nr 1, pp 25-27 (USSR) ABSTRACT: The results obtained by the investigations carried out in the steel melting laboratory of the DMI from 1956-1957 are presen- ted. The collaborators of the IChM AS UkrSSR assisted in the recording of the case histories of the heats, and in the selection and analysis of metal and slag samples. In the IChM AS UkrSSR in collaboration with the DMI the converting of Kerch pig iron in the laboratory furnace was investigated. For this purpose the 0.9-1.0 t laboratory converter was adapted to Card 1/4 combined lateral blasting. The converter had a capacity of Conversion of High-phosphorus Pig Iron in Oxygen- SOV/163-59-1-6/50 blast Converters. Communication I. Conversion of High-phosphorus Pig Iron in a Converter With Combined Lateral Blast 0-85 m3, the depth of the metal bath was 355 mm. Pi,-, iron of the following composition was converted: 3.4 % C-35.8 % C, f 1.3-1-8 % F, 1-0-1.3 % Mn, 1.10-0.5 0/0 Si, 0.08-0.20 % S. 0.10-0.25 % V. The pig iron had been melted in a cupola fur- nace. Previous to converting it had a temperature of 1,140-1,2000. Limestone was added to a percentage of 13-15 of the charge weight. A special device permitted to add the fluxing agents at any moment without interruption of the con- verting process. In the experiments with combined blasting the air was supplied to the converter through 4 tuy'eres with a diameter of 40 mm at a pressure of 0-15-M5 atmospheres excess pressure by a centrifugal blower with a capacity of 50-60 m3/min. The oxygen was supplied through two special copper tubes mounted within the tuyeres under 6-10 atmospheres excess pressure. The flow rate of oxygen varied between 1.7-4.2 m3/min the oxygen consumption per ton being 15-25 m3. In this investigation special interest was given to problems Card 2/4 of slag formation and of early dephosphorization. Several Conversion-of HiGh-phosphorus Pig Iron in Oxygen- SOV/163-59-1-6/50 blast Converters. Communication I. Conversion of High-phosphorus Pig Iron in a Converter With Combined Lateral Blast methods of blast arrangement were studied. The best results were obtained with the second test series where the inclination of the tuyeires was reduced to 0-50 (from the horizontal) and the flow rate was reduced by closing two tuy6res. These measures lead to quite respectable results. A comparison with information from publications (Refs 8-10) showed that the formation of slag with a high solution value and the oxidation of the phosphorus proceeds much faster in a converter with a combined air-oxygen blast than in a converter with only bottom or lateral air blast. In converters with combined blast it is possible to produce a slag with a P 205 content meeting the specifications and an ingot steel with a low nitrogen and phosphorus content (-C 0. 04 %) without any consider- able overconverting. The experiments showed that the following measures must be taken in order to accelerate slag formation and dephosphorization: 1) During the initial stage of the process (25-30 % of the total time) the blast must be directed Card 3/4 onto the metal surface or into the uppar layer of the bath. Conversion of High-phosphorus Pig Iron in Oxygen- SOV/163-59-1-6/50 blast Converters. Communication I. Conversion of High-phosphorus Pig Iron in a Converter With Combined Lateral Blast 2) A well calcined limestone must be used and it must be given in portions at certain intervals, There are 10 references, 5 of which are Soviet. ASSOCIATION: Dnepropetrovskiy metallurgicheskiy institut (Dnepropetrovsk Institute of Metallurgy) SUBMITTED: June 5, 1958 Card 4/4 AUTHORS: 'Baptizmanskiyj__V, Dubrovskiy, Yu.A~, SOV/163-59-1-7/50 Lapitskiy, V. I., Poyarkov, A. M., Rostovtsev, S. T,, Sesyuk, G. S., Ogryzkin, Ye. M. TITLE: Conversion of High-phosphorus Pig Iron in an Oxygen-blast Con- verter (Peredel vysokofosforistogo chuguna v konvertere s kislorodnym dutlyem). Communication II. Conversion of High- phosphorus Pig Iron by Top Blasting (Soobshcheniye II. Peredel vysokofoeforistogo chuguna v konvertere a verkhnim kislorodaym dutlyem) PERIODICAL: Nauchnyye doklady vysshey ehkoly. Metallurgiya, 1959, Nr 1, pp 2B-33 (USSR) ABSTRACT: This investigation was carried out with water cooled blast tuyeres with a diameter of B-10 mm, blasting oxygen with a purity of 94-98 % under 5-8 atmospheres excess pressure into the converter. The rate of oxygen supply v4ried between 3.3-6.1 m3lmin, the average oxygen consumption for the last heats was 70 m3/ton. Limestone and for some heats pig iron with a bauxite content of 1-5-2.0 % were used as a fluxing Card 1/3 agent. For the last heats limestone-ore briquettes with an Conversion of High-phosphorus Pig Iron in an Oxygen- SOV/163-59-1-7/55,C) blast Converter. Communication II. Conversion of High-phosphorus Pig Iron by Top Blasting ore content of about 50 % were used. The fluxing agents were added in portions, 3 to 4 times, in intervals of 1.5-4.0 minu- tes. All in all 12 experimental heats were prepared. It appeared from the results that the course of slag formation and of dephosphorization in converting high-phosphorus pig iron in a converter with a top oxygen blast are essentially dependent upon the following factors: 1) Upon the iron oxide constituent in the primary slag. 2) Upon the oxygen supply and the rate of oxygen consumption by the heat. Both factors are determined by the circulation in the heat. 3) Upon the state and the composition of the slag constituents. 4) Upon the thickness of the solid phase layer in the converter during the initial stage of c-onverting- 5) Upon the temperature con- ditions during blasting. The experiments showed that 1) if high-phosphorus pig iron is converted in oxygen top-blast con- verters the formation of a basic slag with a high solution value, which can be brought up to the specified P205 content Card 2/3 can be guaranteed at the beginning of blasting (by adding up Conversion-of High-phosphorus Pig Iron in an Oxygen- SOV/163-59-1-7/50 blast Converter. Communication II. Convergion of High-phosphorus Pig Iron by Top Blasting to 15 % of limestone). By the same way an early dephosphoriza- tion may be ensured and thus a metal with a phosphorus con- tent of less than 0.1 % at a hi&h carbonconcentration (1-1.5 %) can be produced. This may be aohived without using fluor-spar or rabbling the slag. 2) In converters of such a type carbon steel can be produced from basic Bessemer pig iron with a low phosphorus content (< 0.05 %) and a low nitrogen content. This may'be achieved by stopping the process at the specified'earbon content- 3) The formation of a slag with a high solution value and the oxidation of phosphorus in a converter with combined lateral blasting (with a separate air and oxygen supply) pro.. ceed much faster than in converters with a bottom and lateral air blast. There are 5 figures and 2 Soviet references, ASSOCIATION: Dnepropetrovskiy metallurgicheakiy institut (Dnepropetrovsk Institute of Metallurgy) SUBVITTEDt June 5, 1958 Card 3/3 TURKENIGH, D.I., inzh.; ROSTOVTSLFV, S.T., prof**-; BAPTIMANSKIT, V.I., dotsent; PROSVIRIN, K.S., inzh. Effect of reduction and modification on the purity and resilience of converter rail steel. Izv. vys. ucheb. zave; cherne met& 2 MOO; 21-25 Mr '59. (MIRA 12:7) 1,Dnepropetrovskiy metallurgichesk# institut. Rekomendovano kafedroy teorii metallurgicheekikh proteeBsov Dnepropetrovskogo metallurgichookogo instituta.. (Stee 1--Ke tallography) (Railroads-Raile-Testing) (Bessemer process) R&MZMAA rTV_jT,_X_Imnd. takhn. nauk, doteent lz_~~ Slag awasification under the affect of the blow and impurities in converter steel. lzv. vys. ucheb. zav.; chern. met. 2 no.4:31-43 Ap '59. MRL 12:8) leftepropetrovskI7 metallurgicheakiy institut. Rekomendovano kafedro7 teorii metallurgicheskikh protoassov Dnepropetrovskogo, metallurgicheekogo instituta. (Bessemer process) (Steel--Defects) KUZNMSOV, M.P., inz*n,; BAPTIUMISKIT, V.I., doteent, kand.toldm.nauk; PROBVIAIN, X* . , 1 3 - 1 1 V - "WENNOWNP Hature of spotty segration in steel. Izv.v3rv*uchab*zav*; charn. met. 2 no*5:35-39 MY '59. (JAIRA 12:9) 1. Zavod in, Dzerabinskogo, DnepropAtrovskiv metallurgicheakiy institut. Rokonendovano kafedroy toorii Tintallurgichaskikb pro- tagesoy Dnepropetravokogo notallurgicbeskogn inatituta. (steel Tlefects) -AMISla -.jppolitoxicb,-XKMNIKOT, I.Te., prof doktor takhn. ~~m nauk, retoenzent; K01MMOT, T.T., prof., retsenzent; PTITSTRA, V.I., red.izd-va; KAJUSHT, A.I., tekhn.red. [Mechanism and kinetics of processes in the converter betbd Makhanizm i kinetiks protsessov v konverternoi vanne. Koskva, Gos.nauchno-tekhn.izd-vo lit-ry po chernoi i tBvetnoi metallurgii. 1960. 283 p. WRA 14:1) (Converters) BAPTIZMANSKIY, V. 1.p Doe TECH SCIt "MECHANISM AND Kj- A- NETICS OF PROCESSES IN TfK CONVERTER BATH." Moscow,1961. (MIN OF HIGHER AND SEC SPEC ED RSFSRq MOSCOW INST OF STEEL IM I., V, STALIN). (KLI 3-61, 212). 160 BAnj2jMdKIY, V.I.; BLUM, B.A.; YERSHOV,, G.S. Effect of the composition of a fluidized bed on the content of hydrogen in steel. Stall 22 mo*12t1084-1086 D 162. (MIRA 15:22) 1. Dnepropetroveki7 metallurgicheoldy institut (for Baptizmanskiy). 2. Ural'skiy politekbnicheskiy institut (for Bk=, Yershov). (Fluidization) (Steel-Hydrogen content) Tj 7 N) f~ N PHASE I BOOK EXPLOITATION SOV/5411 Konferentslya po fWko-khtmicheskim osnovam proizvodstva stall. 5th. Mescow, 1959. Fiziko-khimicheskiye osnovy proizvodstva stall; trudy konferentali (Physic och emical Bases of Steel Making; Transactions of the Fiftli Conference on the Fhysicochemical Bases of Steelmaldhg) Moscow, Metallurgizdat, 1961. 512 p. Errata slip inserted. 3. 700 copies printed. Sponsoring Agency: Akademlya nauk SSSR. Institut metallurgil Imeni A. A. Baykova. Responsible Ed.: A. M. Samarin, Corresponding Member, Academy of Sciences USSR; Ed. of Publishing House: Y a. D. Rozentsveyg. Tech, Ed.: V. V. Mikhaylova. Card 1/16 7 7*r--- 40poo Physicochemlcal Bases of (Cant.) BOV/5411 PURPOSE: This collection of articles Is intended for engineers and technicians of metallurgical and machine-building plants, senior studenta of schools of higher education, staff members of design bureaus and planning institutes. and scientific research workers. COVERAGE: The collection contains reports presented at the fifth annual convention devoted to the review of the physicochemical bases of the steelmaking process. These reports deal with problems of the mechanism and kinetics of reactions taking place in the molten metal in steelmaking furnaces. The following are also discussed., problems involved in the prodktion of alloyed steel, the structure of the Ingot, the mechanism of solidification. and the converter steelmaking process. The articles contain conclusions drawn from the results of experimental studies, and are accompanied by references of which most are Soviet. Card 2116 Physicochemical Bases of (Cont.) SOV/5411 f Shumov, M. M. Producing Steel and Semifinished Products in a Converter by Using Naturally, Alloyed Chromium Pig Iron 268 Gurevich, B. Ye. , V. D. Epshteyn, and T. V. Andreyev. Determining the Optimum Conditions of Slag Formation, Dephosphorization, and Decarburization of High-Phospho- rus Pig Iron in a Semicommercial Converter With Oxygen Top Blowing 281 Baptizmanskiy, B. 1. , and Yu. A. Dubrovskiy. Investigating TFe-C-onverter-Sfe-el Contamination in Oxygen Top Blowing 292 Mazun, A. 1. , and A. S. Ovchinnikov. Gas Content in Steel Made in a Converter With Various Types of Blasts and Blowing 299 Afanas 1yev, S. G. , M. M. Shumov, and M.P. Kvitko. Some Kinetic and Process Regularities in the Oxygen Top Blowing of Pig Iron 308 Card 11/16 Phyalcochemlcal Bases of (Cont.) SOV/5411 Zaykov, S. T. Using - Lime-Iron-Ore Briquettes for Processing Pig Iron in a Converter With Oxygen [Blast) 319 PART III. NONMETALLIC INCLUSIONS AND THE PAOPERTIES OF STEEL Popell, S. I., and G. F. Konovalov. Removing High -Temperature Melting Inclusions From Rimmed Steel 325 Volkov, S. Ye., and A. M. Samarin. Effect of Deoxidation on the j Desulfurization of Stiel 331 f Butakov, D.,K. -Effect of Hydrogen on the Separation of Sulfur in the Structure of the Cast Steel 337 Rostovtsev, S. T. D. 1. Turkenich, V. L Bjpq!%n!My. and K. S. - 7 ons in Rail Steel Made in a Prosvirnin. Nonmetallic Oxide InclO Converter 344 Card 12 h6 . BAPTIZMWKI-Y-, V,11,. investigating on models the top blowing of metals. Izv. vys. ucheb. zav.; ohern. met. 5 no..10:31-41 162. (MM 15:11) 1. Dnepropetroveldy metallurgicheskiy institut. (C6nvertera-Models) BAPTIZMANSKIrp V.I. -, ~ -- t -, Wayi3 of expanding and improving the oxygen-blown converter process* Izv, vya* ucheb. zav.; chern. met. 7 no.2:49-55 164. (MM .17:3) 1. Dnepropetrovskiy metanurgicheakiy institut. LWUNIN, A.M.; MVIRIN, X.S.; EESEDIN, P.T.; ORGIYAN, V.S.; BAPTIZMANSKIY, V.I.; SHCHERBINA, P.A.; REKHLIS, G.N. Rails made of low-all acid, Bessemer steel. Stall 24 no.5:448-451-"It 164. (NIRA 171l2) 1. Dneprovskiy metallurgicheskiy zavod im. Dzerzhinskogo, Dnepropetrovskiy metallurgicheskiy institut i Ukrainskiy institut metallov, 3 YANOVSKIYq I.L.; RUBINSKIY, P.S.; BAPTIZMANSKIY, V.L, doktor tekhn. nauk Effect of leaving the final slag in a converter or the indioes of.the oxygen-blown converter process. Met. i gornorud. prom. no.1:17-20 Ja_F 165. . (NIU. 18:3) YANOVSKIX, I.L.; ZHIGULIN, V.I.; RUBINSKIY, P.S.; BAPTIZ14ANSKIY V.I. Studying the causes of ejection from converters. Izv. vys. ucheb. zav.; chern. met. 8 no.5:31-39 165. (MIRA 18:5) 1. Dnepropetrovskiy metallurgicheskiy institut i Metallurgicheskiy zavod imeni Petrovskogo. SAIAGEAN ~ Tr..-, HRELESCU, M.; S T OJANOVICI j P, j_ EXRIF . Action of aliminum oxies on ceramic flu3ms. Studii. tehn Timisoara 9 no.1/2:19448 162. TOPCIUP V.I.; BARCARU., Elena) 1A , . FERENCZY, St.; MARTONY., A. I a -!~" Methodo of preparing the phagoreoistant stems of Clostridium aceto- butylicum Weitzmannij, and remats obtained from the laboratory and factory tests. Studii chim Timiooara 9 noel/2:141-160 Ja-,Te 162. 1. Fabrica de butanol-acetona "Solventull* si Institutul de Igiena., Timisoara. HRELE9CU, Mircea; POPOVICI, David; BAI, Frideric Alloying mild stael with chromitun and manganese in automatic build-up valding with band ele.-trodes. Constr mas 16 no. 2: 77-80 F 164. WIT (1).jW/W(k) 'EJEW -11i ,10-Ap IM31547 SOURCE CODE: RU/0027/65/010/OD2/0347/0337 AUTHCRt Hrelescu, Mircea; Vasp Alexandru.- Lipovanp Leonardt_pqrp Friedrich 119 ORG: Timis6ara Technical Research Center, AcadgM of the Socialist Republic of Rumania, Timisoara (Academia Republicii Socialiste Romaniap Centrulde cercetarl t TITIE: Contributions to the study of the destruction by cavitation sow steels obtained by electric are aUloying if SOURCE: Studii si cercetari de metalurgie, v. 10, no. 2, 1965, 347-357 TOPIC TAGS: chromium steel, manganese steel, cavitation, welding technology 'The istanc o destruction authors studied the res ABSTRACT: ,by cavitation of metals deposited by welding~~ntd obtained through the alloying of soft stools i-n-e-fe-otric arcs with the .aid of ceramic fluxes* As compared to a cast steelf the .metals deposited by welding were found to have a better resiB- ..tance to cavitation# especially in the case of Cr-Mn steels* Thi use of suitable ceramic fluxes was found to-le-a-a-f-o ~deppsited metals with good anti-cavitation properties, Ori26.art. hass' 4'figures and ~'iabless (JPRS: 34pl661 f SUB-6DE: 11, 20 SU13M DATE: non*e ORIG MT: 002 / SOV MF: 010 OTHAW: 005 af BAR, I., prof., inzh. Practice of mechanizing work and equipment repair in strip ininOB. Sbor. trud. HISI no.39t4O9-410 161. (MIRA 16:4) 1. Fraybergskaya gornaya Omdemiye., Germanskaya Demokrati- cheskaya Respublika. (Germany, East-Strip mining-Equipment and supplies) AUTHOR: Bar, I.G. and-Engel G.A., Engineers. 104-4-20/40 TITLE: The firs-tyear of operation of mechanised repair stations. (Pervyy god dkspluatatsii remontnykh mekhanizirovannykh stantsiy.) PERIODICAL: "Elektricheskie Stantsii" (Power Stations), 1957, Vol. 28, No.4, pp. 67-70 (U.S.S.R.) ABSTRACT: Recent increases in the volume of repair and operational work on transmission lines that has resulted from extension of the lines has obliged the operating staff to reorganise their work and to improve its technical basis. With this end in view in 1955-56 the povier systems created 150 mechanised repair stations and in 1957 a further 14. Mechanised repair stations represent a new type operational organisation which replace line sections, Repair and operational work on the lines is carried out by centralised complex methods. With these methods the work can be carried out in two or three patrols with great economy of time as compared with piecemeal repair in which the repair squads repaired individual defect- ive elements and wasted much time on going from one place to another and in climbing up and down poles. With complex 1/2 organisation of repair work the brigade carries out the great- est possible amount of work every time that it goes out on The first year of operation of mechnni sed repair stations. (Cont.) lo4-4-2o/4o the line. Numerous examples of the work of these mechnnised stations are quoted; some power systems still do not recog- nise the mechanised repair stations as a new organisational unit and so do not use them to full advantage. During the first period of operation the stations did not receive all the necessary machines but even so the work was much improved. As a result of the introduction of complex maintenance repair work the output of labour was doubled and the duration of work on the lines reduced. Simultaneous major overhaul of the lines by several brigades provided with automobile transport was equally effective. Further practical examples of this are quoted. There has been conside3nble reduction in the work required to clear the course of the lines. In several systems the'cutting of undergrowth by hand has been replaced by chemi- cal spraying. In many cases individual machines and the stations as a whole have had a high load fadtor but part of the 2/2 equipment has not been fully used particularly electrical tools and equipment for live line working. AVAILABLE: IJFCC) ILVE(t.j, ETI JD M-AP6623476 SOURCE CODE: CZ/0038/65/000/004/0126/0129 AUTHOR: Pelciks jiri-P_elchik T.; cm -B Ya. ORG: AcZapot22& Military Acadws Brno (Vojenska akademic A. Zapotockeho) TITIE: Adsorption of ruthenium on solid sorbentelin acid aqueous solutions SOURCE: Jaderna energiet no. 4s 1966,, 126-129 TOPIC TAGS: ruthenium, aqueous solutionp adsorption, solution kinetics ABSTRACT: The adsorption kinetics of ruthenium were investigated. The adsorptive factors of ruthenium were established for solutions of 0.1 M hydrochloric acid and n acetate buffered solutions at pH 5-5 of ruthenium nitrosonitrate on the surface i of teflon, glass, polyvinyl chloride, polyethylenes paper, rubbers activated pharcoal,-and wool for ruthenium concentrations of 0.084 and 0.0084-g-at/l. This paper was presented by M. Bezdek. Orig. art. has: 2 figures and 1 table. [JFRS] none ORIG IW: 004 / SOV REW * 005 BO, Iudvik (Varsmava) Teabnical functions in build1mg; building licenses. P~rzegl budowl i bad miesok 33 no.68331-332 J9161 BAR, Ludidk,--dr (Warszawa) ...... OLikbility q the architect" by [Dr] Walter Bindhardto Reviewed- by tudwik Bar. Przegl budowl i bud mieozk 35 no.4:237-238 Ap 163. BAR,, Iudvik (Warszawa) . Few building legislation. Przegl budowl i bud mieszk 33 n0.4%207-209; 213--U4 Ap'61. AUTHOR: Bhr, Oldrich, Department.,Manager Cz/4_60-5_6/~5 TITLE: Fifteen Years Development of the ZPS Works at Gottwaidov PERIODICAL. Novfi Technika, 1960, No. 5, pp. 202 - 206 TEXT: The author deals with the history of the Nhrodn! podnik, Zhvody pi~esnbho stroJ!renstvi (Precision Mechanics Plants, People's Enterprise) at Gottwal- dov. Since 1951, the following types of turret lathes have been produced. R 52 RN _36, RN 6o, R 12, RT Bo, RT 26/34, the multispindle automatic lathes AN and ANK, the AD type automatics; the SK 25 type vertical lathes were delivered to the USSR. In addition, seven cranes of 20 ton load capacity have been exported to the USSR. Until 1965, the Plant will produce .33 types of turret lathes. The ZPS Works production program includes the following machinery; bootmaking machines, mills, precise V/ dividing wheels, component parts for industrial sewing machines, small transformers, motors for computers, recorders etc; hoists, cranes, power tools, single-function machines etc. Among others, 12 designs of machine tools will be displayed at the Second Brno Sample Fair, e.g. the turret lathes RP and RB 63, the FK 500 profiler, the AD 6A type precise automatic lathe, and the six-spindle AN 6/40 type automatic lathe with double-indexing attachment. Then the author deals with the expansion Card 1/2 Fifteen Years Development of the ZPS Works at Oottwaldov - cz/4-60-5-6/35 of the Plant at Malenoviae; in 1959, the construction of machine shops was completed and during the Third Five-Year Plan the new cast-steel foundry will be put in opera- tion. The nEunes of merited workers are listed; the Ahd prhce (Order of labor) was awarded to Josef Hrdli6ka, to the Laureht Stbtni cena (State Prize Winner) Doctor Engineer Josef Do6khi~ for his inventions in the field of metallurgy, to Stanislav Ferdus, Fr. Havllk- Tdolf grbinek; the AM Republiky (Order of the Republic) was awarded to LudvIk ~odhrek and to Jos. gvr6ek. Data are given on the competitive I/ obligations in honour of the 15th anniversary of liberation, followed by percent figure's on the production increase and on the increased average wages (1,296 K6s in 1953, 1,469 K6s in 1959.).- Figure 1 shows the increase of production from 1946 to 1960; Figure 2 shows the productivity increase, and Figure 3 the increase of,Average wages for the same period of time. Finally the author deals with housing construction, social welfare and recreation facilities for workers. There are 3 d4agrams and 5 photographs. ASSOCIATIONt TRV ZPS n.p., Gottwaldov (ZPS, People's Enterprise, Gottwaldov) Card 2/2 BAR, Oldrich 15 years of production successes in the Precision Machine Plants of Gottwaldov. Nova techn3.%a no.5:202-206 160. 1. Vedouci oddeleni TRV, Zavody presneho strojirenstvi, Gottwaldov. (Machinery) BAR, T. _ TECMOLOGY PERIODICAL-. PREZGLAD GSOLOGICZNY. Vol. 6, no. 3, Mar. 1953. BARt T. Brown caol in Trzydnik Maly. p. 123. Irlonthly List of East European Accessions (SEAT) LC Vol. 8, no. 4 April 1959, Unclass. 5 (2)p 21 (5) AUTHOR: Barlaromir SOV/,1'12-25-8-8/44 TITLE: Separation Methods in the Analysis of Mixtures of the Most Important Fission Elements. Review PERIODICAL: Zavodakaya laboratoriya, 1959, Vol 259 Nr 81, PP 917 - 926 (USSR) ABSTRACT: The analysis of ultramicro-quantities of radioactive elements formed at the-fission of U 233, U 235 ., and Pu 239 is effected by separation of.these fission products (FE) achieved by simul- tan6ous precipitation, extraction with organic solvents, dis- tillation, eleotro-prooipitation, or chromatography. The ar- tiole:contain6 a detailed review of the different separation and determination methods for (FE) based on reference litera- ture. The individual methods are separately explained and the following paragraphs are mentioned-, method of simultaneous- precipitation, extraction methods with organic solvents, dis- tillation methods, methods of electro-precipitation, chromato- graphic methods, and several methods which apply the scintilla- tion-gamma spectroscopy. There is a brief description of the Card 1/2 Separation Methods in the Analysis of Mixtures of the SOV/32-25-8-8/44 Most Important Fission Elements. Review different determination possibilities of the following ele- ments: Sr, Ba, Y, the elements of the rare earthal Ce, Zrj Prq Nd, La, Nbj Cs, Tep promethium, J, Ru, Pb, Cd. There are 3 figures and 141 references, 30 of which are Soviet. Card 2/2 D ALMAORS: TIME - Bhr, Jaromir, and Polans*, Pavel 26275 Z/038/61/000/003/003/003 A201/A126 X The use of vibrations in the investigation of isotope adsorption PERIODICAL-. Jadernh energie, no. 3, 1961, 90 - 92 TEOU One of the principal methods of studying the isotopic state in liquid ph"e is the adsorption method of isotopes on solid sorbents. The article descrRes experiments designed to test the suitability of vibrations for stirring the radio- active solution during adsorption on solid sorbents. The working solution con- tained the Pr-143 isotope in the form of chloride in a concentration of -10-12 gram atoms per liter. For pH regulation,the solution'contained 0.01 mol/lit so- dium acetate, 0.002 mol/lit podium chloride, and hydrochloric acid in a quantity necessary to bring the pH number to 6.3. Analytic-grade reagents and redestilled water were used for the'preparation of the -solutions. The following solid-sorbent samples were*used: Circular rubber foils from surgical.gloves, 16 mm in diameter, 0,2 mm thick.% polyamide (Silon) foil, 0.1 mm thick; "blue-ribbon!'-grade filter paper, and square (16 x 16 mm) samples of cleaned, undyed, degreased wool fabric (47.8 mg/cm2). The Silon samples were soaked in the working solution (without the Card 1/4 26275 Z/038/61/000/003/w3/003 The use of vibrations in the Investigation of... A201/A126 radioisotope) for 16 hours prior to the experiment. A vibrating table was used for the agitation of the solution during the adsorption on the samples. The vibreions of -the table were produced by an electromagnet fed from a.c. line. Or, the table were placed crystallization dishes with 50 milliliters (ml) of the working solu- tion with Pr-143, and a series of 7 samples. The solu'tjon_,with the samples was agit-ated eitber by vibrations (100 oscillationp/sec) with an amplitude of -0.1 mm, or by a magnetic agitator (150_rpm); at times, it Was left undisturbed. A eon- trcl solution with samples_was agitated in Erlenmayer flasks by a flutter mixer (2.5 o5cillations/sec, 12 mm amplitude). After the Preselecited adsorption time the filter-Daper and wool-fabric samples wore quickly rinsed three times in 1 ml of 96% ethanol, using a suction cup to remove the superfluous radioactive sclution. h~ rubber and Silon samples were rinsed by successive submerging in ke dishes with 96% ethanol for 3 - 5 seconds. Previous checks had shown that 96% ethanol does not cause desorption of Pr-143 from the sorbenlv-s during such a short. time. Af 4~er drying the samples, beta activity on either side of each sample was mea.5-areed by a beta counter with a window mass of 1.54 mg/cm2. The percentage of the isotope adsorption was calculated from the activity ratio on l,cm2 of the sample geomet-ric urface to the ac`ivity of I ml of the wo&' solufion. The pli number of ttie so I. -n9 Card 2A 26275 Z/()38/61/000/003/003/003 The use of vibrations in the investigation of... A201/A126 lution was checked before and after the experiment and the weight loss during the agitation in the solutions was determined. The results of the experiments can be summarized as follows: The kinetic curves of the Fr-143 adsorption on the rubber foil are similar for agitation by both vibrations and flutter mixing; the same is true for the adsorption on the Silon foil. This indicates that vibrations with an amplitude of -0.1 mm have an influence on,_the isotope diffusion on the sorbent surface similar to that of agitition in a flutter mixer. It can be assumed that flutter mixing causes an enlargement of the pores of the filter paper and thus en- ables adsorption also on those fibers of the paper which were not accesible to ad- sorption prior to the disruption of the texture. Adsorption on wool fabric with flutter mixing could not be established due to the complete mechanical destruction of the fabric. Isotope adsorption without agitati;n on sorbents which were pre- viously subjected to vibrations in a nonradioactive solution was the same as on samples which were not sublected to this operation. This indicates that vibrations in the aqueous phase do not change the adsorption capacity of the sorbents under investigation. The vibration method has the advantage that it does not affect the adsorption capacity of the sorbents nor does it mechanically disrupt samples such as filter paper or wool fabric, Appreciation is extended to Engineer A. Hynlit and F. Koza for designing the vibration table.' (Technical editor: V. Wena). There Card 3/4 26275 Z/038/61/()00/003/003/003 The use of vibrations in the investigation of ... A201/A126 are 2 figures, 1 table and 2 Soviet-bloc references. ASSOCIATION- Vojenskh akademie Antonina Zhp6tockeho, Brno (Antonin Zhpotock~ Military Academy, Brno) Ca-rd 4/4 Ba#V.; YRANK, L. Effect of climatic therapy on certain pulmonary diseases In children observed in a pediatric hospital In Velke Losiny. Ceak.pediat.15 no.8:737-740 Ag 160. l.Detska lecelana ve Valkyeb Loainach. reditel dr V.Bar Krajoka hygienteko-epidemiologickA ttanice, Olomouc. (LUNG DVWA 6 in inf & child) (CLIMATE ther) UR. V. -, NOVAKOVA, U.; KLGXK, Me Changes in physical condition and ventilatory function of asthmatic children and long term results of climatotherapy. Cesk,pediat, 15 no.9:766-7?i s 16o. 1. Detska lecebna. ve Velkych Loeinach, reditel MUDr. V.Bar. (ASTMA in infancy & childhood) (CLIMATE ther.) jivu 7"(77TT A '-'D!~A ~'Pc 6 'fol 13/10 Internal 1-Pd Oct 50 5779. THE ACTIVATION OF FIBRINOLYSIS IN SEVERE ABRUPTIO PLA- CENTAE - Aktywizacja fibrynolizy w przypadku przedwczesnego odklejenia siq lo*yska - Bar-Pr-&tkowska J. and Niewiarowska M. T1. Kiln. Polotnictwa I-Mor. -Kobiec. A.M.. Warszawa - POL. TYG. LEK. 1958, 13/48 (1908-1910) Tables I In the patient's plasma the plasminogen increased, the antiplasmin diminished and the thrombin Inhibitor appeared. This inhibitor was not identical with heparin. It is suggested that it may be a product of the lysis of fibrinogen and fibrin by plas- min described by Niewiaroski.and Kowalski as antithrombin V. (X. 6) BARA, Anna New methodical possibilities in cholesterol determination. Kiserletes orvostud. 10 no.1,96-99 Feb 58. 1. Szombathelyi Magyei Korhaz Kozpanti Inboratoriuma. (CHOLISTICROL, in blood determ., comparison of various methods (Hun)) PAPOLCZY, Antal, dr.; BARA, Anna, dr. Investigations on lipold metabolism of patients with cancer and pulmonary tubeTculosis. Orv.hetil. 101 no.38:1346-1347 18 S 160. 1. Vas wegyat Tanaes "Markusovszky" Korhaz, Tudosebeezati Oastaly as Kozponti Laboratorium (NIOPLLMS metab.) (TUBERCULOSIS, PULMONARY metab.) (LIPrDS metab.) GIBIYXI, Kornal; PROBA, Bronislaw; BARA, Boleglaw Analysis of time connectiosn In ballistocardiograpby. Polskie arch. med.wown. 25 no.2:271-282 155. 1. Z III Kliniki Chor.We%fnetzzqch Sl.A.M. w Bytomiu. Kierownik: prof. dr. K. Gibinski, .. III Klinika, Wewn.Slasklej A.M. Bytom. Batorego 15. (13AT,LISTOCARDIOGWM, time connections) BARA, Boleslaw Statistics of diabetes mellitus in Bytom. Polskie arch. mod. wown. 26 no-7:1139-1144 1956. 1. Z III Kliniki Ch. Wewnetrzrych Sl. Akad. Modycznej w Bytomiu Klerownik: prof. dr. med. K. Gibinski. Bytom. u1. Batorego 15, III Klinika Chorob Wewn. (DIABICTIM RELLITUS, statistics, in Poland (Pol)) SMRM, ZoVia. MAKOVIR, Henryk; GIBINSKI, Kornel $tudies on Coxsackie viruses. II. Coxsackie viruses in Bornholm disease. Arch. 1-mn. ter. doew. 5tl97-218 1957. (PIMODYNTA, IMEMIG, etiol. & pathogen. Coxsackie viruses, isolation & typing (Pol)) (GOXSACKU VIRUM, infect. epidemia pleurodynia, isolation & typing of viruses (Pol)) or'YMIRPTA ~-.EDICA.'Sec,. 17 Vol- 3/11 Public Lealth.Nov. 57 3331. BARA B. III Klin. Chor. Wewn. ~1.A.M., Bytom. ---Choroba Bornholmska na 7e-re_nieB~tomia. Bornholm disease i; the territory of By- to m POL. TYG. LEK. 1957, 12/ 4 (126 -128) Graphs 1 During the period 28/811954 to 31/3/56, 64 cases were registered. Of 37 in which virological tests were carried out, the result was positive in 16. Most cases were observed in the end of the summer. One patient was from Warsaw. (XX, 17) tv I k I C k 0 Y a 6 W& w ov e_4-r.2,,v Y c.. 1~ A. AA. %v 13y+ o mi u X L. 10 Y 4 o m - u.) G 4- -o -Y -e- '0~ ~j Y' J. BW, Boleslaw; HARTLEB, Marian; WIECZWK, Irena Biochemical research on venous blood of extremities in obliterative vascular lesions. I. Oxidation of venous blood*' Polskie arch. med. vewn. 28 no-5:651-662 1956' 1. Z' III Xliniki Chorob Wewn SI.A.M. w :Bvtomiu. Kierownik:prof dr med. K. Gibinski. Adres: Bytom, Batorego 15. (VASCULAR DISRASDS, PERIPHZRAL, blood in oxygen in obliterative die (Pol)) (OXYGEN# in blood vanous, in obliterative peripheral vase. die. (Poi))