Document Number (FOIA) /ESDN (CREST):
CIA-RDP94T00858R000600910001-3
Body:
Approved For Release 2008/02/12 CIA-RDP94T00858R000600910001-3
DATA CENTER OPERATIONS BRANCH
NDS OPERATIONS PROCEDURE MANUAL SYSTEMS SW & HW
SYMBOLIC TITLE: N/A
ORIGINATOR:
13 April 1983
Approved For Release 2008/02/12 : CIA-RDP94T00858R000600910001-3 I
Approved For Release 2008/02/12 : CIA-RDP94T00858R000600910001-3
Yip
DATA CENTER OPERATIONS BRANCH`.
DCOB SYSTEM SOFTWARE ~ HARDWARE
OPERATIONS PROCEDURE MANUAL
NO. 50-0008
AMPERIF TEST SYSTEM
1. This DCOB System Software q naiun"A_
Manual establishes the method by which Amperif maintenance personnelO
ven This forrthe purposeal
ons will test disks and Disk Conifois Units.
will be in affect when Amper g DCA, DCB, DCC, OR DCD).
of working on Disk-Control Units (i.e.,
REFERENCES
2. N/A
PROCESSING
3. All operational disk drives should be put in 'READ ONLY'
mode or 'POWERED OFF' for data protection. s l
4. If Amperif wants the system ofea1DRS
be
Amperif Test System that would
I.D. - AMPDRS) and any available removeable scratch
pack (i.e., packs have the fol-
i TEST02, TEST05, TEST08e These scratch h or AMPT04.
dsk .. p may be needed. loowwingng labels s
l
Control Units current,
5. The Amperif Test Syste~hewill
necessa~y tDaskusing
line
operational boot tape with only of off
and disk drives. All other Disk Control Units will be put
at the Multi-Access Subsystem (MAS).
Approved For Release 2008/02/12 : CIA-RDP94T00858R000600910001-3
Approved For Release 2008/02/12 : CIA-RDP94T00858R000600910001-3
DCOB SYST I SOFTWARE fi HARDWARE
OPERATIONS PROCEDURE P?1ANUAL
No. SO-0008
AMPERIF TEST SYSTEM
SYMBOLIC TITLE:
PROGRAMMER
DATE
PROTECT NUMBER:
OPERATION-GENERAL
1 NOVEMBER 1982
Approved For Release 2008/02/12 : CIA-RDP94T00858R000600910001-3