DRUM COPY AND VERIFY

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP94T00858R000601180001-3
• Release Decision: RIFPUB
• Original Classification: U
• Document Page Count: 18
• Document Creation Date: December 28, 2016
• Document Release Date: March 13, 2008
• Sequence Number: 1
• Publication Date: April 13, 1983
• Content Type: REPORT

Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
ATTIENI M U TM:- M AL Js ?M LV
NDS OPERATIONS PROCEDURE MANUAL SYSTEM SW & HW
NO. P-D007 13 April 1983
SYMBOLIC TITLE: N/A
PROGRAMMER:
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
1. GENERAL
1.1.1. TRANSPARENT CONSOLE COMMANDS
- - --1 .1-. 2-.-.1 llM P _-K E Y S - ----- -- - -
1-1
1-1
1.1.3. MASS STORAGE SAVE TAPE FORMAT
1.1.3.1. CONTROL WORDS ON THE DRUM SAVE TAPE
1-. 2-
-D RUM --SAVE-.-_-
1-1
1-2
1-2
.
.-._-.
-
1.2.1. MESSAGES AND RESPONSES
1-2
1.3. RESTORE ALL DRUMS SAVED
1-4
3
-1-
--MESSAGES--AND -RESPONSES--
.1
.
.
.
1.3.2. EXEC SOFTWARE DRUM BOOT
1-4
1.3.2.1. MESSAGES AND RESPONSES
1-4
-3
3-
-SOF-TWARE- TAPE-BOOT - -- -
-
--1-
.
.
-
.
1.3.3.1. MESSAGES AND RESPONSES
1-5
1.4. DRUM SELECTIVE LOAD
1-6
4
--MESSAGES- AND-RESPONSE-S--
1
1-
.
.
.
1.5. 5046 SAVE
1-6
1.5.1. MESSAGES AND RESPONSES
1-6
-- 1 .6.-VER-IFY-- SAVE- TAPE -TO-.MASS -STORAGE -
1.6.1. MESSAGES AND RESPONSES
1-8
1.7. TAPE COPY
1-9
1.7.1.--MESSAGES AND RESPONSES--------
1-9
-
_
1.8. DOUBLE SAFE DRUM SAVE
1-10
1.8.1. MESSAGES AND RESPONSES
1-10
OADER -------
- 1 9-.--CSP-L
1-12
-
-- --
1.9.1. MESSAGES AND RESPONSES
1-12
1.10. CHANGING IOU/CHMOD/INTERFACE
1-13
1 .1C-.-1-.-ME-SSAGES -AND RE-SPONSES---
3
1-1
-
-
-
1.11. TAPE-PUR
1-13
1.11.1. TAPE-PUR INITIATION
1-13
HELP-
1-13
1.11.1.2.
aASG
1-14
1.11.1.3.
COPY
1-14
1.11.1.4, 1.11.1.4-.--MOVE ---
1-14
1.11.1.5.
aMARK
1-14
1.11.1.6.
@REWIND
1-14
@CLOSE--
-1-15
1.11.1.8.
&FREE
1-15
1.11.1.9.
aRD
1-15
1.11.1.10.
aPDF----
1-15
1.11.1.11.
&RDEOT
1-15
1.11.1.12.
aW
1-15
1.11.1.13.
-&R
1-15
1.11.1.14.
aBS
1-16
1.11.1.15.
aFS
1-16
1 .11.1.16.
NON-STOP TAPE COPY EXAMPLE---
1-16
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 j j
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
THIS OFFILNE UTILITY IS DESIGNED TO RUN IN AN OFF-LINE MODE ON
ALL 1100 SYSTEMS (1108 THRU 1100/80). THIS RELEASE CONTAINS THE
ABIL-I-TYTOSAVE--AND--RE-S-TORE---432- ---AND- 1--78-2-DR-UMS--(ON------SO12--
CONTROLERS), VERIFY THE SAVE TAPE EQUALS THE DRUMS, COPY TAPE TO
TAPE, AND LOAD CSP TEST PROGRAMS. THE TAPE HANDLER SUPPORTS 8C'S,
U16 ' S .,--U 2-0-' -S-, -AND-- U30-U36 ' S . -- --- ---
WHEN-A-N-Y--MESSAGE----IS- OUTST-ANDI-NG-ON:-THE---CONSOLE--ANY --OF---THE
FOLLOWING CONTROL COMMANDS CAN BE ISSUED.
**NOPR TURNS OFF CONSOLE PRINT
** P R N T T-URNS ON C O N S O L E PRINT----- --- ----- -... ---------_ --- __ ._~
**RE ST RESTART
**EI T PRINTS EI TRACE TABLE
* CORE---T-O--INSPECTAND-CHANGE- CORE--(END-OR-E-X-I-T--TO-C-ONTINUE1-----------
**SNAP SNAP MEMORY OR GRS (**SNAP SIZE,START)
**SR&< SET 'R' BIT ON TAPE SET MODE COMMANDS (MSA'S)
*CRE----CLEAR-'R'- BIT- ON TAPE---MODE-SE-T---COMM-AND-S---(MSA-'S) **U100 SETS BOTTOM OF SCREEN TO LINE 16 (NON80)
**U200 SETS BOTTOM OF SCREEN TO LINE 24 (NON80)
**DUeL---SELECT- TAPE WRITE ---CHANNE-L--FOR-ASG-,W----(**DUAL---XX).-
(FOR 80 AND 60 **DUAL IOU/CM)
JUMP I - SHORT CUT TO ANSWER 5 (DOUBLE SAFE DRUM SAVE)
JUMP 2 - MULTI HOST USING ONE TAPE CONTROL UNIT (DEBUGG)
_--__-AND-SO46 SNAPS-ETC --
JUMP 3 - MULTI HOST USING ONE TAPE CONTROL UNIT (DEBUGG)
JUMP 4 - PUT CONSOLE EI'S IN EI TRACE TABLE (DEBUGG 80)
JUMP --_7 ---- AVOIDS REWINDING TAPE - -T O -- INTERLOCK ----------- --- - - -- -
JUMP 9 - ASKS FOR TAPE DENSITY ON OUTPUT TAPES (9TK VIA MSA ONLY)
JUMP 10- ALLOWS THE DUMP TO OPERATE LIKE A MASTER TAPE
JUMP--14---CONSOLE PRINTS A HARD-COP-Y---ON--ALL-MSG-S-------
JUMP 15- OMIT CONSOLE PRINTER OUTPUT
THE FIRST FOUR WORDS OF EACH BLOCK ARE USED FOR CONTROL AND CHECK
INFORMATION. THE NEXT REST OF THE BLOCK IS DATA FROM THE DRUM.
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 i f
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
DRUM UNITS ARE SAVED ONE UNIT PER FILE ON THE TAPE. TAPE SWAP IS
DONE WHEN END OF TAPE IS RECIVED AND THE SAVE OPERATION HAS NOT
YET COMPLETED.--BLOCK SEQUENCE NUMBERS-CONTI-NUE--ACCROSS-TAPES WHEN--
TAPE SWAP IS REQUIRED.
WORD 0 = DRUM ADDRESS
WORD 1,S1 = DRUM CHANNEL (NON 80'S)
-------WORD-1,52 = UNI-T-- TABLE---INDEX--dNON-8D``S)-- ----.--
WORD 1,H1 = WORD MASS STORAGE PATH 1100/80 (IOU/CM/DEVA)
WORD 1,H2 = TAPE BLOCK COUNT
-- WORD-2-= STARTING ADDRESS OF--THE--UNIT
WORD 3 = ENDING ADDRESS -02000 OF THE UNIT
WORD 4 = FIRST OF 02000 DATA WORDS FROM DRUM OR 03400
FROM n1-SK
TSWAP TAPE BUFFER ( 16 WORDS )
WORD 0 = '$SWAPS'
---- WORD--1-.=--BLOCK--tt-OF--LA-ST--DATA--BLO-CK-
THE-DRUM-SA-V-E -COPIES--THE - CONTENTS -OF-4-32/475-2--DRUMS-TO -TAPE. -THE---
BOOT MUST BE FROM A MASTER OFF LINE UTILITY TAPE.
LOAD OUTPUT ON BOOT SS UNIT '06' IF REQUIRED
I-DRUM SAVE, 2-5046 SAVE, 3-TAPE COPY, 4-CSPLOAD
----5-DRUM SAVE"_ 2 COPYS, -6-TAPE/PUR,---7-SITE-DRUMS -- -
SELECT TASK 1,2,3,4,5,6,7
KEYIN=1
-.---ENTER DRUM -PATH IOU /CHMOD/INTERF-AGE-----------
IOU=D-3, CM=O-7, INTERFACE=A,B,C,D
KEY IN=2/5/E
- ARE 432 DRUMS-FIRST ? 'Y','N`
KEYIN=N (NO 432'S ARE CONFIGURED)
ENTER 17P2 DRUM UNITS 'X,X,X,X' OR 'N'
-KEYIN=1,0 (UP TO 8 UNITS MAY BE-SOLLECTED)
(AT THIS POINT THE DUMP WILL TAKE PLACE)
DRUM DUMP COMPLETE AS SPECIFIED
--CURRENT OPERATION IS COMPLETE. ANSWER THE--NEXT MSG
ONLY IF ANOTHER OPERATION IS DESIRED.
1 - MASS STORAGE SAVE OR TAPE COPY
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 j
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
2 - VERIFY TAPE- = MASS STORAGE OR RESTORE MASS STORAGE
3 - EXEC DRUM BOOT FROM DRUM UNIT 0 (SOFTWARE BOOT)
-4- SOFTWARE TAPE BOOT-------
ANSWER 1,2,3,4
(SEE 1.3.2 AND 1.3.3)
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 j f
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
THE CRUM FULL RESTORE LOADS ALL DRUMS THAT HAVE BEEN SAVED ON THE
SAVE TAPE. THE TAPE HAS THE DRUM CHANNEL AND DRUM ADDRESS THE DATA
CAME -FROM-AND--THE- TAPE- LOAD RESTORES THE--DADA-TO-THE---LOCATION----ON---
THE DRUM IT CAME FROM. TAPE PARITY , BLOCK SIZE AND BLOCK SEQUENCE
ARE CHECKED. THE OPERATOR IS GIVEN THE OPTION TO CONTINUE OR RETRY
ON MOST-ERR-O.RS IF DESIRED.-- THE-BOOT--TAPE-MU-ST-BE-THE-SAVE- TAPE. ---
--- -FUL--L-OR SELECTIVE LOAD, VER-IFY-OR NEW----!F,S,V,N?--- -
KEYIN=F
LOADING ENTIRE CONTENTS FROM TAPE TO DRUM ?Y?
- KEY-IN=Y? (A- LAST--MSG BEFORE--- WRI-T-ING-T-A-P-ETO-DRUM)- ---
TAPE TO DRUM COMPLETE
CURRENT OPERATION IS COMPLETE. ANSWER THE NEXT MSG
- ONLY--IF--ANO-THER-OPERATION-IS-DESI-RE-D.--
1 - MASS STORAGE SAVE OR TAPE COPY
2 - VERIFY TAPE = MASS STORAGE OR RESTORE MASS STORAGE
--3- - EXEC DRUM BOOT FROM- DRUM-UNIT--0-(-SOFTWARE BOOT)
4 - SOFTWARE TAPE BOOT
ANSWER 1,2,3,4
--- (SEE--1 . 3 .2 - AND 1 .3.3) - - - --- - -
THE -- S-OF_TWARE--- DRUM - BOOT - FIRST- READS-DR-UM--UNIT-0-ON-THE CHANNEL
PREVOUSALLY SOLLECTED FOR THE DRUM LOAD OR SAVE INTO A SCRATCH
BUFFE^ AND CHECKS SEVERAL LOCATIONS TO DETERMINE IF THAT IS THE
F 1 AGAIN,
BUT THIS TIME THE UTILITY WILL BE OVERLA.YED.
--4 - SOFTWARE TAPE BOOT-.---
ANSWER 1,2,3,4
KEYIN=3
CURRENT OPERATION IS COMPLETE. ANSWER THE NEXT MSG
ONLY IF ANOTHER OPERATION IS DESIRED.
-1 - MASS STORAGE SAVE OR TAPE COP-Y--------- ---
2 - VERIFY TAPE = MASS STORAGE OR RESTORE MASS STORAGE
3 - EXEC DRUM BOOT FROM DRUM UNIT 0 (SOFTWARE BOOT)
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
NOTE: TO BOOT EXEC OTHER CAU'S MUST HAVE MSR SET
JUMPS SET 15, ANS GO
KE-Y.I.N1=GO (EXEC MESSAGES WILL FOLLOW)
THE SOFTWARE TAPE BOOT ALLOWS A TAPE ON ANY UNIT OF THE ACTIVE
TAPE CHANNEL TO BE SOFTWARE BOOTED, AFTER FIRST READING THE TAPE
INTO- A.-SCRATCH--BUFFER TO DETERMINE IF- I-T----IS--A-P-OSSIBLE- BOOT--BLOCK----
BEFORE DOING THE OVERLAY.
CURRENT OPERATION IS COMPLETE. ANSWER THE NEXT MSG
ONLY IF ANOTHER OPERATION IS DESIRED.
-- 1 - MA-SS--STORAGE SAVE-OR--- T-APE--C-0P-Y 2 - VERIFY TAPE = MASS STORAGE^OR RESTORE MASS STO-R-AGE
3 - EXEC DRUM BOOT FROM DRUM UNIT 0 (SOFTWARE BOOT)
4 --.SOFTWARE TAPE. BOOT -~_ __~. -- --
ANSWER 1,2, 3,4
KEYIN=4
-WHEN--INPUT IS ON C13/UG5 .--ANS-GO--OR-UNIT !XX-'
KEYIN=GO
---JUMPS -SET --4,13,-15,---ANS-GO--
KE Y I'N=G 0
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
THE SELECTIVE LOAD IS USED TO RESTORE SELECTED UNITS FROM THE
DRUM SAVE TAPE. UNITS MAY BE SOLECTED IN ANY ORDER AS LONG AS THEY
ARE---ON-T;-4E---SAVE--- -TAPE,-- BUT---WILL-BE-R?E-L-O-A-DE-D-IN-THE----ORDER-THEY----
APPEAR ON THE TAPE. THE TAPE BOOTED MUST BE THE SAVE TAPE.
FULL OR SELECTIVE LOAD, VERIFY OR NEW - 'F,S,V,N'
KEYIN=S
-SELECTIVE--DRUM RELOAD -CHOI-
ENTER 432 UNITS 'X,X,X,X' OR N
KEYIN=1,3
---E-NTE-R--1-782--UNITS---'X, X,X-,X'---OR---N-
KEYIN=3
TAPE TO DRUM COMPLETE
--CURRENT.- OPERATION--IS-- COMPLETE- ANSWE-R--THE--NEXT-MSG-----
ONLY IF ANOTHER OPERATION IS DESIRED.
1 - MASS STORAGE SAVE OR TAPE COPY
--2 --- VERIFY--TAPE- =- MASS STOR A-GE--OR--RFS-TORE---MASS --S TOR AGE
3 - EXEC DRUM BOOT FROM DRUM UNIT 0 (SOFTWARE BOOT)
4 - SOFTWARE TAPE. BOOT
---ANSWER---1-,2-,3,4- -- ---- -- - ---
(SEE 1.3.2 AND 1.3.3)
THE 5046 SAVE COPIES THE CONTENTS OF 8450/8434 DISK TO TAPE.
JUMP KEY 2 SNAPS PART OF THE HARDWARE AND SOFTWARE BIT MAPS, THE
V'OL1 LABLE-BLOCK-ETC. --NOTE -THAT-T-HE--5046-0ISK-SAYE-AND RESTORE HAS
NOT BEEN DEBUGGED FULLY. TRY THIS ONLY IF YOU CAN AFFORD TO LOSE
THE PACK. THE BOOT MUST BE FROM A MASTER OFF LINE UTILITY TAPE.
LOAD OUTPUT ON BOOT SS UNIT '06' IF REQUIRED
1-DRUM SAVE, 2-5046 SAVE, 3-TAPE-COPY,-4-CSPLOAD
5-DRUM SAVE 2 COPyS, 6-TAPE/PUR, 7-SITE DRUMS
SELECT TASK 1,2, 3,4, 5,6,7
KEYIN=2
- -
- - -
DISK SAVE IS IN DEBUGG
1-SAVE ALL TKS 2-SAVE
STAGE
ASGO
TKS ANS 1,2
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 F
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
(NOTE: I CAN'T SEE ANY REASON TO DUMP UNUSED TRACKS)
INSERT 5046 CHANNEL 'XX' IN DECIMAL (EXAMPLE 08)
KEYIN=01-.. --- ----
ENTER 5046/8450 DISK UNIT NUMBER 'XX'
KEYIN=01
_-_ ---P-A C K- I D- X X X X X X ------ ----------
(AT THIS POINT THE DUMP WILL TAKE PLACE)
5046 DUMP COMPLETE AS SPECIFIED
--__.CURREN-T -OPE.RATION -IS-COMPLE-T-E.-ANSWER--_-IHE-NE-XT_MSG
ONLY IF ANOTHER OPERATION IS DESIRED.
1 - MASS STORAGE SAVE OR TAPE COPY
-TAPE -= MASS--STORAGE- OR-R-E-S-T-ORE-MASS- STORAGE
-----2--V E R I F Y
3 - EXEC DRUM BOOT FROM DRUM UNIT 0 (SOFTWARE BOOT)
4 - SOFTWARE TAPE BOOT
ANSWER-1,2,3,4- - --- -
(SEE 1.3.2 AND 1.3.3)
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 i
 FULL. OR SELECTIVE LOAD, VERIFY OR NEW - 'F,S,V,N'
KEYIN=V
----VER-1fY -TAPE -=--DRUM--
DRUM ADDRESSES 000010000000
- 000017777777 COMPARE OK
DRUM ADDRESSES 000000000000
- 000007777777 COMPARE OK
--------TAPE-- COMPARE COMPLETE - -
CURRENT OPERATION IS COMPLETE. ANSWER THE NEXT MSG
ONLY IF ANOTHER OPERATION IS DESIRED.
-.--1---MASS.--STORAGE SAVE OR--.T-APE--C-OPT!
2
-
VERIFY TAPE = MASS STORAGE-OR RESTORE MASS STG-RAGE
3
-
EXEC DRUM BOOT FROM DRUM UNIT 0 (SOFTWARE BOOT)
-- -4
--
SOFTWARE TAPE-BOOT--------._-.___---
ANSWER 1,2,3,4
(SEE 1.3.2 AND 1.3.3)
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
COMPARE THE CONTENTS OF THE SAVE TAPE TO THE DRUMS TO VERIFY THE
SAVE TAPE IS A GOOD COPY OF THE CONTENTS OF THE DRUMS AND TO
INSURE-THE-TAPE--CAN- BE- READ. ---THE--- T-APE-BOOTED-MUST---BE----THE -- SAVE-
TAPE.
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
COPY ANY INPUT TAPE TO ANY OUTPUT TAPE UNIT ON THE BOOT CHANNEL.
THE OUTPUT TAPE WILL BE AT THE HIGHEST DENSITY THE OUTPUT UNIT IS
CAPABLE-OF-.----IF---I LESSER--- DENSI-TY -IS---DES-IR-ED-JUMP--9-MAYBE-USED-ON----
NINE TRACK TAPE UNITS TO ENTER DENSITY. THE BOOT MUST BE FROM A
MASTER OFF LINE UTILITY TAPE.
LOAD OUTPUT ON BOOT SS UNIT '06' IF REQUIRED
- --1 DRUM SAVE,- 2-5046 --SAVE-,- 3-TAPE-COPY-,--4-CSP-LOAD-------- --
5-DRUM SAVE 2 CONS, 6-TAPE/PUR, 7-SITE DRUMS
SELECT TASK 1,2,3,4,5,6,7
K E Y I N= 3 ------ - ------ . --- __ -_ _ -___-_ _- __ _ -. - _
SERVICE C13/U06 OUTPUT TAPE (AN INTERRUPT FROM THE
CONSOLE WILL ALLOW THE OPERATOR TO CHANGE TAPE UNITS IF HE SO
DESIRES) -__--
CHANGE OUTPUT TAPE UNIT ? ANS '-XX' OR 'N'
KEYIN=07
-----SERVICE -S13/U07 - OUTPUT- TAPE-----
WHEN INPUT TAPE IS ON C13/U05 ANS GO OR UNIT 'XX'
KEYIN=GO
__.COPY. TO DOUBLE-EOF-'S- COMPLETE-------------
CURRENT OPERATION IS COMPLETE. ANSWER THE NEXT MSG
ONLY IF ANOTHER OPERATION IS DESIRED.
-----.-----1-----MASS-ST-ORAGE--SAVE---0R-T-APE COP-Y- -----
2 - 'VERIFY TAPE = MASS STORAGE OR RESTORE MASS STORAGE
4 - SOFTWARE TAPE BOOT
.------ANSWER 1,2,3,4----(NOT-E-:--31S---NO-T---ALLOWED)--------------
(SEE 1.3.2 AND 1.3.3)
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 i f
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
THIS DUMPS DRUMS TO TAPE , COPIES THE TAPE AND VERIFIES THE TAPE
TO DRUM. MINIMUM OPERATOR INTERVENTION IS REQUIRED. BOOTING THE
MASTER-T-APE -W-ITH---JUMP-1SET--ACTIVATE-S TH-IS-MODE--OR-WHEN-NO---JUMPS
ARE SET ANSWER 5 TO THE FIRST MESSAGE THAT REQUIRES A RESPONSE.
BLANKS ARE REQUIRED TO BE ON BOOT UNIT +1 AND +2. THE BOOT MUST
BE--FROM-A-MASTER--OFF- LINE--UT?ILI-TY-TARE.- - --- - - - -
NOTE: TAPE SWAP IS NOT SUPPORTED IN THIS MODE
LOAD OUTPUT ON BOOT SS UNIT '06' IF REQUIRED
1-DRUM SAVE, 2-5046 SAVE, 3-TAPE COPY, 4-CSPLOAD
----S-DRUM- SAVE 2--COPYS, -6-TAPE/PUR,-7--SITE--L~PUMS- ---
SELECT TASK 1,2,3,4,5,6,7
KEYIN=5
------SPECIAL-- DRUM SAVE
COPY- AND--VERI-FY
,
MOUNT BLANK TAPES ON BOOT UNIT _*1 AND +2
- --KEYIN=01-
ARE 432 DRUMS FIRST ? `Y','N'
KEYIN=N (UNIT 0 WAS A 1782)
---EN-TE-R--1782--DRUM--UNITS ?X
X
X
X!-OR-'N'
,
,
,
KEYIN=1,0 (UP TO 8 UNITS MAY BE SOLLECTED)
(AT THIS POINT THE DUMP WILL TAKE PLACE)
--- DRUM-DUMP--COMPLETE--A S -SPEC-IFIED
LOAD-OUTPUT TAPE ON BOOT SS UNIT '07' (BLANK)
WHEN INPUT IS ON C13/U06
ANS GO OR UNIT 'XX'
-----PSEUDO -KEYIN = GO --
-
-
-
-
----- -
EOF001
EOF002
--- E-0 F 0
0 3
- --
- ---
-
COPY
TO
DOUBLE
EOF'S COMPLETE
WHEN
INPUT IS
ON C13/U07 ANS GO
OR
UNIT
'XX'
-PSEUDO KEYIN-- =--GO
VERIFY TAPE = MASS STORAGE
DRUM ADDRESSES 000010000000 - 000017777777 COMPARE OK
--------DRUM ADDRESSES 000000000000---000007.777777 COMPARE -OK
TAPE COMPARE COMPLETE
CURRENT OPERATION IS COMPLETE. ANSWER THE NEXT MSG
- ONLY--IF ANOTHER OPERATION IS DESIRED.
1 - MASS STORAGE SAVE OR TAPE COPY
2 - VERIFY TAPE = MASS STORAGE OR RESTORE MASS STORAGE
---3 - EXEC DRUM BOOT FROM DRUM UNIT--0 -(SOFTWA-RE BOOT)
4 - SOFTWARE TAPE BOOT
ANSWER 1,2,3,4
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
THE CSP LOADER LOADS TEST PROGRAMS INTO THE 1100 HOST MEMORY AND
SENDS THEM TO A CSP AFTER RECIVING AN IPL. ONLY ONE CSP PROGRAM IS
L O A D E-D --I N-T 0 THE-- -H O S T--- AT- ANY ONE -TIM E-.--CS P-P-R-O G R-A M 5 I-N --THE-- HOST---CAN
BE OVERLAYED FROM THE MASTER TAPE VIA A COMMAND FROM THE OPERATORS
CONSOLE.
LOAD OUTPUT ON BOOT SS UNIT '06' IF REQUIRED
I--DRUM -SAVE, --2-5046--SAVE-,---3-TAPE-C-OPY,-4-C-SPLOAD--
5-DRUM SAVE 2 COPYS, 6-TAPE/PUR, 7-SITE DRUMS
SELECT TASK 1,2,3,4,5,6,7
- -KEYIN=4- - - -
CSP LOAD NUMBERS FOLLOW
PRELUDE LOAD 01
.M I-N-I--I C.A LOAD-- 0 2--
CSP-0770 LOAD 03
CSP LOAD 04
--ICA-- - - LOAD 05
57026 LOAD 06
S7010 LOAD 07
-....--CSPRCR------ LOAD-- 08------
CSPRCR-NSA LOAD 09
CSPRCR-NASA LOAD 10
- -- CSP-R-CR-TRES-LOAD -- -11
CPC ' LOAD 12
MUXOFF LOAD 13
- - --- . R D R O F F - - ----LOAD
-- 14 - -- - --~. - __- - -
PCHOFF LOAD 15
PRT7680 LOAD 16
-----PRT7682. -----LOAD 17--- - - ----
PRT770 LOAD 18
(HOST WAITS FOR A CONSOLE INTERRUPT)
---- E N T E-R -LOAD- N UM B E R---, H E L P---, I N I T-,-NO ! X-X!-, t-,-I-ril----
KEYIN-01
PRELUDE LOADED
----PRELUDE - IPL.
PRELUDE IPL
ENTER LOAD NUMBER HELP INIT NO 'XX',H,I,N
---- -- KEYLN=03..--
CSP-0770
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 1
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
ALLOWS THE USER TO CHANGE EITHER THE IOU, CHANNEL MODULE, OR THE
INTERFACE FOR A DRUM RESTORE OR VERIFY. THE TAPE BOOTED MUST BE
THE -SAVE--TAPE--.---
FULL OR SELECTIVE LOAD, VERIFY OR NEW - 'F,S,V,N'
AT--THIS POINT- THE- USER- DEC-IDES-ON--UHA-T OT-HER-**---_
# FUNCTION TO PERFORM ( 'F,S,V' ) #*
KEYIN=N
ENTER DRUM PATH IOU/CHMOD/INTERFACE
--- -IOU =0- 3 ,--- C M =0 - 7 --INTER F A CE =A-, B,-C-,-D-
KEYIN=2/6/B
FULL--OR -SELECTIVE-LOAD-,--VERIF-Y---OR-NE-N--!F,-S,V,N'-- -
TAPE-PUR INCORPERATES MANY FIR-PUR TAPE COMMANDS. IT ALLOWS THE
USER TO DO TAPE OPERATIONS OFF-LINE FROM THE CONSOLE SUCH AS aAS6
, a COPY--,-olMOVE -, (MARK----- ET-C-.--- THE--MAX--BL-O-CK-SIZE-F-OR-TAPE -COPY S
IS 03D000 WORDS.
LOAD OUTPUT ON BOOT SS UNIT '06' IF REQUIRED
I-DRUM SAVE, 2-5046 SAVE, 3-TAPE COPY, 4-CSPLOAD
--S-DRUM SAVE 2 COPYS,-6-TAPE/PUR-,? 7--S1T-E--DRUMS - - -
SELECT TASK 1,2,3,4,5,6,7
KEYIN=6
- --ENTE-R-CMD OR HELP ------------------
SUPPORTED COMMANDS ARE RASG , aCOPY , &MOVE , MARK , REWIND
&FFEE , aCLOSE , @RD , aRDF , @RDEOT , aBS , &FS , HELP.
KEYIN=HELP
DISPLAYS BRIEF OPERATING INSTRUCTIONS----
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
KEYIN=@ASG TI,U9V,3
&ASG ASSIGN A TAPE (&ASG,W TO ASSIGN A BLANK TAPE). T1=TAPE. FILE
NAME.-N-AMESAVAIL-ABLE- ARE--T1, T2,-T3,T-4,-T5-,T6-, IN-,-OUT.-U9V--=----DENSITY--
AT 1600. MOST DENSITY'S ARE SUPPORTED. 3 = UNIT THREE. TO SELECT
FORMATS ASSIGN OPTIONS Q,A,B,C ARE SUPPORTED. (OPTIONS A AND Q
SELECT--QW--MODE ). T-O- ASSIGN--A --TAP-E--AS-OU-TPU.T-IN -A-FORMA T--(Qw-MODW)--
THE ASSIGN = G)ASG,AW T1,U9V,2 .
ASG--OPTIPNS - ---- - - --- A - TAPE TO USE 'A' FORMAT
B - TAPE TO USE 'B' FORMAT
------C----TAPE-TO USE- 'C' FORMAT- - - -
J - ASSUMED , NO LABELS
0 - QUARTER WD MODE (THE SAME AS A OPTION)
- - - 7-- --ASSUMEDTEMPORARY - - -- -- - ----- ------- - --
W - OUTPUT TAPE WRITES TO VALIDATE DENSITY. TAKES 10
CHANNEL FROM THE **DUAL COMMAND.
KEYIN=n© T1,T2,26
T1=INPUI-TAPE---,--T2=OUTPUT---T APE , -26=FILE-S--TO-COPY.-----
-T 6 , 3 MOVE TAPE T6 BACK 3 FILES.
KEYIN=@MARK T4
WPITE TWO EOF'S , BACKSPACE OVER ONE.
KEYIN=&REWIND Ti
REWIND TAPE Ti TO LOADPOINT
KEYIN=DREWIND,I Ti
REWIND TAPE T j TO INTERLOCK.
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 b
KEVIN=@CLOSE T1
WRITE TWO FILE MARKS AND REWIND TAPE T1 TO LOADPOINT.
KEYIN=&FREE T2
REW IND-S-T-APE---T2- TO - INTERLOCK-AND-F-R-EES-UNI-T--STA-US --TABLE. -----.
---KEYIN=aRD ---TI - -
REAC TAPE Ti FARWARD ONE BLOCK.
KEYIN=4RDF T1
READ TAPE TI FARWARD UNTIL AND EOF IS DETECTED.
KEYIN=IRDEOT Ti
READ-----TAPE -.--Ti .--FARWARD-_ -UNTIL----AND--TWO---EOF-kS-ARE DETECTED .-
CONSECUTIVELY.
KEYIN=aW T1
WRITE ONE BLOCK OW TAPE T1.
KEYIN=@WR Ti
WRITE TAPE T1 UNTIL MSG WAITING ON-CONSOLE OR-- END - OF TAPE IS
Et?1COUNTERED. IN EITHER CASE TWO END OF FILES ARE WRITTEN AND THE
TAPE IS BACK SPACED OVER THE LAST FILE MARK.
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3 I P
 Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3
KEYIN=&BS T4
BACKSPACE TAPE T4 ONE BLOCK.
KEYIN=@FS T4
FORT=ARO-SPACE TAPE T4 ONE-BLOCK,
@ASG,WQ T2,U9S,3 (USES CHANNEL FROM **DUAL IN QW MODE)
_---&C O P-Y--T-1-, T 2, 9 9------ --- - -----
IF THE BOOT CHANNEL AND THE CHANNEL ENTERED VIA **OUAL --OMMAND
APE NOT EQUAL, DOUBLE BUFFERING AND OVERLAPING TO WILL TAKE PLACE.
THE -INPUT--TAPE- TI - WAS ASSIGNED AT 800--PP-I--AND--THE---OUT-PUT --T2-- WAS
ASSIGNED AT 6250. CHANCES ARE NON-STOP OPERATION WILL OCCUR ON THE
INPUT TAPE T1. IF BOTH TAPES WERE THE SAME DENSITY NEAR NON-STOP
MAY- BE. -OBTAINED ON BOTH UNITS.
-##DUAL -1 2- (NON 80 WRITE- ON- ---
&ASG,Q T1,U9H,2 (USES BOOT CHANNEL OW MODE)
Approved For Release 2008/03/13: CIA-RDP94T00858R000601180001-3