Document Number (FOIA) /ESDN (CREST):
CIA-RDP78B04770A002300010015-1
Body:
^ SECRET CONFIDENTIAL
^ UNCLASSIFIED
Approved For Release 2005/05/02: CIA-RD
0023000100
6k NO.
CONTRACT INSTION REPORT
25X
TO:
DATE
4 N y r ..'165
CONTRACT ADMINISTRATION & SETTLEMENT .
INSPECTION REPORT NO. (If final, so state)
BRANCH/ PD/ OL
1
ESTIMATED COMPLETION DATE
16 Janu.sry 1)67
NAME OF CONTRACTOR
I Declass Review by NGA.
TYPE OF COMMODITY OR SERVICE
b..
Vain Light Source Tube With I umuring Ste
t
THE CONTRACTOR IS ON SCHEDULE
THE CONTRACTOR WILL PROBABLY REMAIN WITHIN ALLOCATED
)5 Y
El
FUNDS (YES ^ NO IF ANSWER IS "NO" ADVISE REC.
ES
NO
OMMENDATION AND/OR ACTION OF SPONSORING OFFICE. ON
REVERSE HEREOF. IF KNOWN. INDICATE MAGNITUDE OF AD-
PER CENT OF WORK COMPLETED
DITIONAL FUNDS INVOLVED.
PER CENT OF FUNDS EXPENDED arise
HAS AN INTERIM REPORT, FINAL REPORT. PROTOTYPE. OR OTHER END ITEM BEEN RECEIVED FROM THE CONTRACTOR
DURING THE PERIOD? ^ YES R`NO (If yes, give details on reverse side.)
HAS GOVERNMENT-OWNED PROPERTY BEEN DELIVERED TO CONTRACTOR DURING THIS PERIOD? ^ YES No
(If yes, indicate items, quantity, and cost on reverse side.)
INCENTIVES
IS THIS AN INCENTIVE CONTRACT ^ YES Zj,NO
NOTE:
IF YES. CHECK TYPE
USE REVERSE SIDE FOR COMMENTS.
^ COST 0 AWARD ^ PERFORMANCE 0 DELIVERY
FINAL REPORT MUST CONTAIN INCENTIVE EVALUATION.
FEE
OVERALL PERFORMANCE OF CONTRACTOR
1. ^ OUTSTANDING 4. ^ ABOVE AVERAGE 7. ^ UNSATISFACTORY
2. ? EXCELLENT 5. ^ AVERAGE
3. ^ VERY GOOD 6. ^ MINIMUM ACCEPTABLE
IF OVERALL PERFORMANCE OF CONTRACTOR IS UNSATISFACTORY OR MINIMUM ACCEPTABLE INDICATE
REASONS ON REVERSE SIDE.
RECOMMENDED ACTION
^ CONTINUE AS PROGRAMMED ^ WITHHOLD PAYMENT PENDING
SATISFACTORY PERFORMANCE
^ TERMINATE ^ OTHER (Specify)
IF TERMINATION IS RECOMMENDED OR IF THIS IS A FINAL REPORT PUT COMMENTS ON REVERSE IN NARRATIVE
FORM ON CONTRACTOR'S PERFORMANCE AND CERTIFY THAT ALL DELIVERABLE ITEMS UNDER THE CONTRACT HAVE BEEN
RECEIVED. THESE INCLUDE. WHERE APPLICABLE. THE FOLLOWING:
ITEM
RECD
DOES NOT
ITEM
RECD
DOES NOT
APPLY
APPLY
PROTOTYPES
MANUALS
DRAWINGS AND SPECIFICATIONS
FINAL REPORT
PRODUCTION AND/OR OTHER
SPECIAL TOOLING
END ITEMS
OTHER GOVERNMENT PROPERTY
DATE OF LA
T CONTACT WITH CONTRACTOR
S
26 October 1966
SIGNATURE OF INSPECTOR DIVISION
25X
I NSP EC
Approved For Release 2005/05/02 CIA-RDP78BO477OA002300010015-1
FORM USE
8.66 1897 EDITIONS El UNCLASSIFIED IN CONFIDENTIAL ^ SECRET (12.36)
U SECRET
CONFIDENTIAL
Approved F9II4 Iffqq 2 JJF{/02 : CIA-RDP7q
Inspection visit of 26 October lei.
1.
2.
2. T.'-;e deri n of the light table wag reviewed :and tue to
items were discussed.
The brightness we will be 200 to hro) i't:.
Lmberta oper -tinat a mum film plane
tem aerrsture of )5F in u ~70?F ambient. 3T! ?e
1jrV life will be oUt 10,000 k uru and Et
m brightness the l p wil1, require
::ppro ately 60 z ill.ia tps.
1.
2.
11
a.
Eliminction of the divisions on t ,: e 1a ;t cam::,
counter.
Items ilieh requested to be changed (for 25X~
their benefit) sad the technical monitor agreed.
The positions of the c t0ra liave been
to the ex-trwe outside of t e inetr nen , a?i
remain on the saw supportin, aurftrce.
The dieter of the stage transport and,.
have been increased to 3 inches-
Both the overall length 4nd overall, w dti
increased by . inch.
I4 rAng the .,X' counter axed h ndwheel onto
the moving stage. Tire would require t--e
counter d h dwheel to move.
25X1
Reduction of the speed of motion of tee st .
30 turns of the handsel will now be required
to move fate ats 3 in-..hex in either axis.
ring for the iawgosed very the rtn,
versatile ring ulil be retained.
Substitution of I
The following mea3urements will be provided to
^ UN
Tt:e maxim= c? ver glass thirln aces.
The ~xn distances of the microscopes.
le 0230001001 -9
'ETV01-IN
B047799P10015-1 ^ FINAL
25XI
^ SECRET
b. Requested changes that were not permit-
^ UNC LASS I F I ED