SCIENTIFIC ABSTRACT YUSHKO, V. I. - YUSHKO, P. P.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R001963230010-6
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: September 19, 2001
• Sequence Number: 10
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

CO Pw D KOSh p ro f (Ator to b- I in . riauk V .
Irlind. toklin. nriuk;
main, .:VI(;! rlzh.
ModelJng of' the zswitchIngs prcxxiss In the rever3lrq, gear of
I
hydraul'r drivos of dies-ol locomotive.,3. Trudy 1411T no.195i
2 )6-164 '64. 1;~: 9)

GORDEYEV, A.S., kand.tekhn.nquk; YUSHKO, V.I., inzh.
Investigating the 3ingle-flow hydrodynamic transmission with a
synchronizing hydraulic clutch. Trudy MIIT no.175*459-72 163.
- - - - - -- - - - - - 11 - - - - (MA 16 ~ 12) - ,

MEMO, V.I., inzh.
Movemefit of cam clutches and the dyTomic loads In the elements of
the gearbox of single-flow h.7drodynamic tran-emissions. Trudy KIT
no. 175.73-4 K, 163.- (MBU-16.-12'

YUSHKO, V.I-,s, inzh.
Study,ibg the ahift proceas of the raveraing pa." of the hydro-
dynamic drivo of dioal locomotiwa, Trudy MITT no.173t34,-50
163, (MIRA 17s9)

nAYKOV, B.K.; WLEMIA, V.P.; Prinimali uchastiye: VASILIYEV, A.S.;
NATSENEW-MAUvals V,.S. ; KOVIAMIA, A.A.; ZHIGULINIL, L.A.; TEPMOVSKAU.,
'OVA, B.L.; KETOVA, 0.
LOU. WIE~Oj Ya. K.
_~_t-GHMAK, K
Hygienid characteristica of air poUution !4 Gubakha and its effect
on health of the population. Uch, zap. Mosk, nauch,-isal-- inst. san.
i dig. no.6:2-1-25'60. (KIRA 14'. 1:1)
(III7,HNv-AYA GUBAKHA-AIR-POLLUTI011)

gag
DUBROVSKAYA, F.I.; KATSENELEINBAUM, M.S.; YUSHKO, Ya.K.; BULYCHEV, G.V.;
KOROLEVA, V.A.'
Air pollution with. wastes from,sYn'thetic fatty acids and alcohols
and their effect on public health. Gig.i san. 26 no-12:3-8 D 161.
(KM 15:9)
1. is Moskovskogo nauchno-.Jssledovateliskogo instituta gigiyeny
imeni F.F.Erismana.
(SHEBEKIN0--AIR POLLUTION)

D'JBRO'15?'.AYA. F.I.? DYLTZHIVA, T-AT5F21EUmp2..ur4, M*Swo Tu
WHOLVIVA , & pro ~ 7
Disoharge into the atme3phsre of wast"aa 'ron, the proluc- "C 10 n c
s . m. - Z - h e 4 r 1! ~fatty acids and trpir Ucl.
zap. Mo.9k.
ulf~'6 10,9863---qi 161
(14UIA 16.-11)

YEFIY,OVjN.A*; VASIL# YL7,A-S -XV KOHAROVA~ A.A.- KU13W1OVA,P.S.;
ZHIGULINA, L.A.; YUS~ "BMCHE7-,, G, Y.
Effect of wautev of a metallurgical plant on the health of
the population* Uch.zap. Monk. nauoho-issloinat. san. i gig.
no.9:73-76 t61 (MIRA l6sli)

n
P
VM
A I L= MUMAMIX01, CV/5740
Akad=Iya nmik SM. lustitut miraralo~'A, C.-nolhinji. I krj3tajU',hlr-,Il rca-lXkh
clc=ntov
Voprosy minzraln,-ii, ecol-li"m j i Gannzl3m matorozlid-miy reill-11-h elc=utov
(Probla= in "Umorale-,-1, Cicch=-tati-j, =-d r-,-roait For--ation or nara ric=nts)
1~,,:;ccv, 1::d-vo Mll 1560. 253 p. (Sarles: M: Trady, v7p. ZrratzL
rxinted on tha iraida of back comr. 2,200 copica printad.
chief Ed.: K. Ao vu-,crt, cc----)ron4ln-- 1.x.~arp Acf4c--4 of Sciencea
V4pp. Mi V. V. lojMliwithl Ed. of lVblichjr:--, r;,7.t,-at L, Tarwovj
RMFOSE: Oble book is intane---d for =ImraloZicts, =d potrc,~xaaj;aorv.~
CCVMI,C-: Tbla In a Coll-Olation of 2) U*ticlca on tho for=tloz, G--010-7,
m4i--arcloV, ptw~:mphy, ozd vcoct5=13trj of dzpoit3 of rara ole=nta in
Maria r-na k8tviat] Ccntral Ania. lila distribmatian =d el-ractoriztIca of a
r= ele=nts fc-,md in th-ace amas as vall as acm quantitativo and qr-Lllte,-
tive r-,tb--dL% of invastieW.Lng il:a rocks an4 r1narals In ubleh tb*y am fw=d#
car& 1/6

Problc= in Mnaralcsy (Cent.) M-7/5740
or vith Vaich th-cy are dice;=c--a. t'--o artic-lc3 c n "-c-_n-4c7
inve, atlZa' Lion. of the p~~;31b4lltlez of inC~i:;trico- e;ztrr4tion r--a utilizatlom c-'
*blu:3. sonr-11tics are rnanticr-ad. Eae'a
calani", tclluzi=, =d bru 7o p~r cx~.iclc
is acco=2anied by rcferc=2a.
TAX= 07 cor.12-13:

0=,-;.Nzhj A. A, PacuUcwitioa in tba Matribulelon of rsara I;Icn-.nts
in ?Q17=t83-uc Deposita of th,'3 Z=lr-cZ;-orzl-, ReGion of rudnyy Alta7
Se=rov,. Ta. 1. On tb-, Cant-cal. o--:* Lit%it-m and I'lubidium in I!i=rzl3
of AL?w.Um Ile,--atitca of tL3 l*nzoroldy 1-c-inif 20
Badalov, S. T., snI S. Z=--atov. 0 of Seloull= mA,
Tcll=i= In tb-- Ore Dapo5ita oZ U-7alyk 24
*oro%~,ra, V. 17. On tl--- Cont,-nt of rLcmlim in llolybdaenitca of th3
-CFO- 23
Card 2/6
. . .........

Prob1cra in Mnoralozy (Cott.)
Yea thoval Ye 1! and I I ru=amn!z, of tha Vichzviy,-j*
1:7untaLm, I~a cnCL ttz raculiml-tion of Its
33
ZI!,--bin, A. G., 0. 11. Inahliltditzr, end 114 Yo. X:--a!x7a. Prareconotic
Asrociations of Acconr,,or,7 Mmrala oZ IL,= Mcm;rt to In l:=cFnUct
Fenitizad llic~clte lutrualva Fo,-:= of tbo Vluh=v7,-o r--=taiw 51
Zh6in, A. 0. On Ib-- eap=mtion 12~ of the Mwrals rilobil=, Zi=cml=,
=4 the nam Eartha In th3,Cxamllto rcr,=tlta oZ the Blymzmka7a NIM 74
Se=r,,-, Ye. 1. Gelzircorl= !z All=liw Peu=tites
Y,Or'--Ln, V,, I., Tn. A. P,-atcnl:o, e=d A. T. D7kov%. ft Britbalits of tba
AlkaUw Books of &mtl=~:atozm T%vi 90
CaLrd

V. V., =1 A* D. V:3 CZ=-^Gluor cr tl:z

ca tt!n
Z;~,Col"c on -tl:z ccatc~,, 02 -Accc:::"7 :11=rau ia cza-a-t-ilaz no
V. V., =d 0. Yo. of r=21nita
...........
Ve Nes crA As V, T%t:,.-:rnrIt-a Z~.-= C-3 rzz-;tji%3 or

Yos ze C2 C~~.Inotlvl tt3

C:207.7 IM =13 V V, X=

proble= in Mzeralc!Z7 (Cozt.) 577/5740
Zl=k.ova, A. S. 04 the rrroblo= cf, C~=tic Of
raic:ocits 174
Til:hownkov, 1. P.jpand R. C=tcct IlOcks Of tL3
L0.1ozor,111Y MunsIr. rrl~alr ml V,~.j VQmLUa4jtIoa o:r DICU11-
!~Utio;l in Thcn or llm%)~ LAA
Voloc,,11,4-.ich, IC. L. on tl.,a pz- 1,-,-A or tb,) Stractural roultion 01' thA
.ob
1:2AZOD3 0*41 L-PIII~,Ma=u C~ma mm
Lab--d---7a, S. X. natiomza 1~3thod of Qucn-titatlw roterzdnation of
Diozominated. Baryll"i- in Crciren Ores 209
Rcdionw, D. A., S. .7. Sobolay'.2. P. zolot.srov, aneL Yo. V. VI=0vQ.
On jAccidental Errors of Quantitative Uzaraldaical. An~Lvais of Ora
$lixms =d Concentrates
card 516

31
j?-mbl---z3 In IU=- raloo7 (C", t.)
L. A. ZC7~rU-,~,nt In of
nr----nita and Ronlorito
X,~-Y:Ujrl, Vo 11. Prooraota In V-.7 of rolAlliml
Ore F eaasb33
v-,d Tanurium Ymm tl?.-. -P--c&u--ta of Coir ra
Kt,-=0vich, S. Ya. Itallnita (Econonic ulurvuy)
97== - Library of conj=ss
card 616
n-M-61

AUSIMO-ZAKILMU. Moo; -BUROVA, Z.N.
Belanium.and tonurium in copper-nickcal deKaltv of the vola.
Poninsulao Trudy Inat, min.# gooktda, i krintallokbim. red,, olom*
no. 3:61-68 159. 1 (RIRA 14:5)
(Kola Peninsula-Selenium) (Kola Peninsula-Tellurium)

-4-
M9 kWk ~-fZWTU~ **;Mq!Z?1J R Mw,~;
YUSHK04AKHAROVA 0 Ye-S
Typomorphic mineral associations in copper-nickel deposits of
the Monchegorsk region and the place of selenium and tellurium
in the general plan of ore formation. Trudy IWM no.5:126-1-35
161. (Yonobegorsk region-Ore deposits) (MIRA 150)

S/2617/63/000/010/0100/0124
ACCESSION HAS AT4028201
AUTHOR% rove~,_O-! _YP-1
*ITLEt 1114liullwistIrv *IF selenium and tellurium In copper-nickol deposits
SOURCE: 'AN MR, l1aIrt,titutmIniralog1l. gookhimll I kristallokhtmit radkikh
elementov. Trudy*$ no_--lOp_ 1963. Redklye ele"aw.-v sullfiday0h mestorozhdent-
yakh (Rare-earth elaw_ts In sulfide deposits)# l0Ol24~-_______
TOPIC TAGS: geology, mineralogy, geochemistrys copper, nickel. selenium, mineral
-deposit
ABSTRACT: This review article provides a great deal of Information on the geo-
chemical properties of selenium and tellurium, the patterns of distribution of
selenium and tellurium In copper-nickel ores, the lsomrphism of selenium and
tellurium in the mineral carriers of these elements, the Influence of change of the
physicochemical conditions of mineral formation on the behavior of selenium and
tellurium In the ore-forming process and the occurrence of selenium and tellurium
In certain deposits In the SSSR. The text is essentially an elaboration a~d inter-
pratatlon,of the tables, whose titles are Indicative of the scope and content of
the review& I oo Cgrtajo physical constants of sulfur, selenium and tellurium;
2 -- Certain properties of 111$$ "25* end 02To; 3 Mean content of S, Se, Too Cu
Card 1/2

ACCESSION NR: AT4028287
and NI for various rocks; 4 -- Content of Se, To and S In the igneous rocks of the
Monchegorsk intrusion; 5 -- Content of Se and Te in copper-nickel deposits; 6 --
Mean Se:Te rat I or for di f ferent . types of ores; 7 -- Content of Se and To I n su I f 1 des
from various types of Monchegorsk ores; 8 -- Approximate content of S, SeTe and
their ratios in the ores of the Kola Peninsula; 9 -- Approximate contents of S, Se
and Te and their ratios In the ores of the Horillsk deposit; 10 -- Mean content of
selenium and tellurium In various minerals of copper-nickel or* 11 -- moan ratios
of So and To In various m1norals of coppee-nIckel ores; 12 -- SH:s34 ratios in
minerals and coni~entratlon of selenium and tellurium; 13 -- Content of S, To and S
and S:Se and S:Te ratios in chalcopyrite, pentlandite and pyrrhotite from Pechenga
d
eposlts; 14 -- Se and Te content in sulfides of various deposits; 15 -- Mean con-'
tent of Se and Te in bornite and late chalcopyrite of the Norillsk deposit. Orig.
art. has: 5 figures and 15 tables.
iASSOCIATION: Institut mineralogit, geoldilmil I kristallokhimil redkikh elementov
(institute of Mineralogy, Geachemistry and Crystal lochemistry of Rare Elements)
SUBMITTED: 00 DATE ACQ: 16Apr64 ENCL: 00
SUB CODE; ES NO REF SOVs 029 OTHERs 004
Card 2/2

Oksana Yevgen#Yevna; SIIIDEYrVA
(Goocheml IJI.D.11 otv. I-ec.;
L3tr-
" and minernloa
COPPor-nickel deposit.] Of Delenlum and
tallura v medno-nikelevykh tellurium in
GeOkhiniia i Mineralogiia selena i
VO lltlauka.," -1964. 110 p, mestorozhdeniiakh. Mo~-~ap lzd-
17: 6)

KO -7-AXIbIROVAp
NIckol tell uride, a new mineral. Dokl. AN SSSR 154 no.
623-614 ja 164.
5)
I* Institilt mi,,ralogii ge0khimij
elemontov. Predstavien' 1 kr'stall0khimil redk1kh
0 akadomikom V.I.Smirnovym.

YUSHKOVt A.
Poqd adviser (NSoclal insurance manuals CC02"MOntarY
ion in Offect.v ReViewed by A. rUshkovf. Okhr. truda j so-ts.
strakh, 4 nos 206-57 F 161. OWA 14:2)
1.-Za-ved-uyus-hchiy otdalom sotsialinogo strakhovaniva MoskoIvskogo
oblaatnogo Soveta Profsoyuzov,,
(insurance, social)

Urgent problem, okhr, truda I Bots. Strakh, 5 no.800 Ag 162.
(MIRA 15:7)
I* Zaveduyushchi3r otdolom 80tsiallnogo strakhovaniya Moskovskogo
OblaOtnOgO 80"ta Profsoyuzov
Clwcov PROvIwE---M,DIC-jDjE 0 INDUSTRDZ)

11' ya
1-7
their dl,.ipat(.,jjr,,V control.
163. Okh. nou'r 29 no.-10:-'~-1-24
(141PA 17:12)

KWANTSEV., M-I,;
Attac~.I-ent to
"- :--~ Co-'-'sco-re f"Or
in vertical holes.
midr 30 i1 '64.
(MITU, 17: 12)
I. Kazalkhskiy nauchno-isaledovatelt3ldy inotItut jrineraltric-ffo
w -
,9~rrlyu j Oltjrany ziedr

YU81UMVY i*S'*) asOrant
- , . . ..... ~ -
I
Elf f e c t of t?~" 0 " a' t ' '-" 1 ty c1f . Jn S t-r==, ts- on the ac cu racy o--
- A.
nstallation of deflectors fo'r artificial deviation of bore-
holes. Izv. v-,s. ucheb. zav.; geol. i razv. a no. 12:113-119
D 165 (IMIA 19:1)
1. Tomskiy politekhnichoskiy institut.

The work Of or, annonler of' non-ferrousi ~~etqlf; it, jqa,_,t furn~lc
_A!? POl fn
Metallurglzdst, 1944. 94 0, . _ k, .
(V PGMOS)Ich 1 rabochin =aesovykh pro~,egsjj)
Cyr. 4 TN2
1. Non-ferrous metals - Metallurgy.

Y-LC~ -3 17 71 ff
1.
TUSHKOV.A.T., kandidat takhatchaskikh nauk; BOGDANOV,Te.S.
Profile of the dramhole. In. AN BSSR no.1:185-196
(Drawing (Ketalwork)) (KWA 8: 10)

eve
Speed of deformation in the various processes of plastic defor-
mation. Inv.-MI BSSR. n0-3:141-154 Ky-Je 153. (KUU 9: 1)
(Deformationa (Keehanics))

S.I.; YUSHKOV, A.T.; STRUKOV, N.A.
Changes In mechanIcalPropertles and plastIcIty of 40W and
4OKK steels. Sbor.naiieh,trud.Fis.-tekh.inst.AN BSSR no,1:26-
38 154. (HZRA 10:1)
(Steel alloys--testing) (Metals, Eflect of temperature on)

GUBKIII. 9.I.; YUSHKOV, A.V.; RUDENOK. P.P.
Deformability of graF and malleabla cast iron. Sbor.nanch.trud.
Tiso-tekh.inst. AN SSSR no.2:3-15 155' (Nm i0a)
(Daformatione (Rechanice)) ~Cast troq-Testing)

YU
GUBKIN, S.I SHKOV.,-.A.V.;.DOBROVOIISKIT, S.I.
Clarifying the causes of metal exfoliation (in the area of bridge
projections) in volume die forging. Sboronauch.trido Tiz*-tekh.Inst.
AN BSSR no.2:16-22 155. (KLU 10: 1)
(Strains-and atresses)-(Foreing)

AKIKOVA, K.I.; BAZHOOV, M.F.-, BAWAWV, G.T.; BMKILTBOKO, X.P.;
BOGDANOV, Te.S.; BMYAKO, M.N.; BOYKO, B.B,; VIROGRADOV, S.V.;
GAGER-TOR9. X.T.; GLOK, T.P.; GOREV, Ej.; GROUSOV. P.I.; GUSHCHINA.T.H.;
TWLIYAROV, I.K.; YESIK07, M.P.- ZDZURRSEIT, A.T.; ZAVJ-RC7, K.T.;
ZAKRAROVA, M.T.: KARCIMVSKTT, V.A.; KCIWOV, A.M.; KD-RZHMKO, O.T.;
LAY=, V.I.; HALITSEV, M.T.; KILMR, L.Te.; KIWVANOT, A.I.;
MIRCHOV, B.S.; HIKONCROVA, N.A.; OLIKHOV, N.P.: OSIPOVA, T.V.;
OSOKW, N.Ye.; PERLIN, I.L., PLAKSIN, I.N.: MOKCFIYL7, A.D.;
RUMYANTSW, M.V.; SEVEMNO, T.P.; SHMIN, P I.; SMIRYAGIN, A.P.;
SPASSKIY, A.G.; TITOV, P.S.; TURKOVSKATA, A.V.; SHAKHNAZAROV, A.K.;
SHPICHIMSKIT, Ye.S.; TURKSHTOVICH, N.A.L-Y~USHKQ'V"'
TANUSHEVICH, L.V.
Sargei Ivanovich Gubkin. TSvet.met. 28 no.6:60-61 N-D 155. (MIRA 10:11)
(Gubkin, Serget rvanovich, 1898-1955)

SOV/ 137-57-10-19104
Translation from: Referativnyyzhurnal, Metallurgiya, 1957, Nr 10, p97 (USSR)
AUTHOR:
TITLE: Resistance to Deformation Under Impact Loads (Soprotivleniye
deformirovaniyu pri udarnom nagruzhenii)
PERIODICAL: Sb, nauchn. tr. fiz.-tekhn. in-i AN BSSR, 1956, Nr 3, pp
78-86
ABSTRACT: I A description is offered of equipment for, and the results of
investigation of the upsetting of copper and steel specimens on
a vertical impact-testing machine. Resistance to deformation
is determined by graphical differentiation of the experimental
curves.
Ya.O.
Card 1/1

SOV/137-57-10-191ZO
Translation f rom: Referativnyy zhurnal, Metallurgiya, 1957, Nr 10, p 98 (USSR)
AUTHORS; Muras, V.
TITLE: Drop-forging a Bending Rod With Electrolytic Heating (Shtam-
povka izgibayushchcgosya sterzhnya s clektrolitnym nagrevom)
PERIODICAL: Sb. nauchn. tr. Fiz. -tekhn. in-t AN BSSR, 1956, Nr 3, pp
105-113
ABSTRACT: An investigation is performed showing the possibility of up-
setting (U) rods in which the ratio of the length of the upset
portion to billet diameter is >2.4, thus making it possible to
reduce the number of passes in press forging. Important fac-
tors in reducing the number of passes are elimination of the
practice of heating too long a portion of the billet and use of
one-shot U of the billet in faceted dies. The design of a die for
U long forgings on a short-stroke crank press i's presented.
M. Ts,
Card 1/1

0-19154
-v/137-57-1
so
10 7,
1 51, -~Jr 10,
al Met
A*V -
fLejerativnyy F.1v -YUS I _:~~
raTislation frorn, roVir-hl I-C-~ -~' .calits (1K voprosy
Dovnar, S-A" Nic'~Ilpo of Die lub r I srnazol'~
T 1-10 P'S'. I auctivity
PLU Mal COn . s t.mpo 19 5 -C 31 pp
, Ther od,rnost, h
On the -COV
rrlrrl,F,.. termichesl'o Iy p teirhil- in- 'BS5 and Of
Sb. nauchn. tr , Provide between
J'F IODICk"-' 137-144 stallatlo"On contact
laboratory In -ypes f jubri-
of a t e-)cchange up 0'
tjol Stigate hea with Various t . the ten-lpeTa
A descril) ~ e change In Of CU
5 to ITL cirnen the imens
J3ST' P, e,.KP eriMent I and the, spe -udged by . Oj Spec ,bj,-ant
heading too change was. 3 the u? settIng 5 f the
lied to
,jeat e% tool In Ous thic'~111'se ation -
were app
cant.S. 'ading r I
e Of a CU J-'C ZOOC, Ica - &Jorl'n borax
tur 1800 and 9 glass, and na -1 before Cl and
yi,aJed to Wate- ana heavy 01 With N lubricant
Nacl ore, ~jeating, eychang of the cal Prop
bO,raY-- - bef t hea r (,,rties 'c OcheMI a SP ec~
Op
SPecirneft yed the leas the rMal its P y tool at . ed
displa, The e:ding eY-Plaln
p0
MIca . order. le degree the
n
llowing " siderab i to .780o, This Is
.fo a to a con f heat going an at
h
depe Mount 0 ()o is less t
The a of C)?-
ertie temperature
imen
Card 1/7
If On the Therrnal Conduct,'Vi,y of SOV/137-57-10
by tile- "CdU( tion DiQ Lubj-i,,ants 19154
rises. 1he
Unit Pressur, re
quired for -ne
.tal flow as ternPerature
A4. T s.

137-58-4-7121
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 4, p 116 (USSR)
AUTHOR: Yushkov, A. V.
TITLE: Problems in the Field of Drop Forging (Zadachi v oblasti gorya-
chey shtampovki)
PERIODICAL: V sb. : Materialy konferentsii po usoversh. tekhnol. goryachey
shtampovki. Minsk. AN BSSR, 1957, pp 3-11
ABSTRACT: A review of a number of drop-forging problems: economy ac-
curacy, heating, and also theoretical propositions, The fact that
the process of precision forming of small forgings has received
inadequate attention is noted.
R,P.
1. Forging--Theory 2. Forging--Econoiaic aspects
Card 1/1

SOV/1 37-58-11-22425
llr~nslation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 11, p 84 (USSR)
AU.THOR: Yushkov, A.
TITLE: A Kinematic Method o(I.Determining the Forces Arising in Dynamic
Upsetting in a Vertical Impact-testing Machine (Kinematicheskiy
metod opredeleniya usiliy pri dinamicheskom osazhivanii na
vertikall nom kopre)
PERIODICAL: V sb.: Materialy konfer--ntsii po usoversh. tekhno:l. goryachey
shtampovki. Minsk, AN BSSR, 1957, pp 19-30
-ABSTRACT: A presentation is made of work in developing relatively simple
kinematic methods of recording upsetting (U) curves-in deformation
by impact. An optical device mounted on the vertical impact-
testing machine is used to record the U curve on photographic film
or paper within coordinates for absolute., reduction versus time.
Graphic differentiation of the U curve plotted on an entargediscale
by means of the tool microscope serves to obtnin the speed and
acceleration of motion of the striker. The deformation force gener-
ated in the specimen is equated to the impact force exerted by the
Card 1/2 striker. Knowing the deformation force in each point of U and the

SOV/137-58-11-22425
A Kinematic Method of Determining tile Arioing (vontl)
cross-sectional area of the specimen (the volume of the specimen is given, and the
instantaneous height is derived from t,he;,U curve) it is possible to plot a graph for
resistance to deformation (D) relative to degree of D. As the rate of motion of
the striker along the entire path of U is known, the U velocity may also be deter-
mined, Graphs of D resistance for ShKh-15 steel on impact U as a function of the
level of D for temperatures from 700 to IZOOOC and of Cu at 200, are presented.
V. 0.

SOV/137-58-11-22426
Translation from: Referativnyy zhurnal. Metallurgiya. 1958, Nr 11, p 84 (USSR)
AUTHORS: Yushkov, A. V. , Bogdanov, Ye. S,
TITLE: Rate of Deformation on Upsetting by Impact (Skorost' deformatsii
pri udarnom'osazhivanii)
PERIODICAL: V sb. : Materialy konferentsii po usoversh', tekhnol. goryachey
shtampovki, Minsk, AN BSSR, 1957, pp 44-5i
ABSTRACT, More precise light is shed on rate of deformation (RD) when forces
are applied by impact. An analysi3 is presented of the processes of
change *in RD by free impact. It Is pointed-out that 'in order for the
results of testing in hot forging to b'e comparable, it is necessary to
determine the characteristic RD values, initial, 'maximum, and
mean. A velocity coefficient for determination of forging stress can
then be determined with greater accuracy. Formulas are sug,'vested
for determining maximum and average RD. It is shown that the RD
is at a maximum at the onset of the process if the strain is less
than 0.5, and when, the height of the upset specimen is 1.65 hn (hn
being the height of the sample at the terminal instant of the process)
Card 1/2 if the strain is over 0.5. The results of the experiments conducted

SOV/137-58-11-22426
Rate of Deformation on Upsetting by Impact
show these equations to reflect the actual course of the process with adequate
accuracy.
V. 0.
Card 2/2

Y~)SRr'ov I
PHASE I BOOK EUWITATION 33
Akademiya nauk Belorusakoy SM. Fizik_o-tekhnIcheskLy institut
Sbornik nwchnykh trudov, vypo IV (Collection of Scientifle Papers,, v. 4)
MLnsk,, Izd-vo AN BSSRx 1958. 261 p, 1.,150 copies printed,
Ed,: Mariks, L.; Tech, Ed.: Bolokhanovich., L; Editorial Board:
Sverdebko, V.P. (Chief Ed,); Gorev, K.V.; girota, U.N.., Bod4ako,, 14N.,,
Parkhutik., P.A.
PURPOSE: This book Is intended for metallurgical engineers and metallurgists,
The scientific papers included in this volume deal with various
problems in metallograpIV., forming of metals, heat treatment, electro-
-erosion, and the physics of metals. No personalities are mentioned.
card l/ 6

C~aection of Scientific Favers (Cont.) U33
TABLE OF CONTMTS:
I* FOPMG OF HEALS 3
Severdenko) V,P., Bogdanov, G.N. Production of Hollow Bodies by
Rolling in-the Pasty State- 3
Dovnar, S.A. Methods of Introducing a Lubricant in the Process of
Hot Die Stamping of Metals 3T
Severdenko, V.P., Pasechnyy, S.A. Effect of ROU Diameter on
Resistance to Deformation in the Cold RoUing of Steel Sheets 52
Dovww, S.A, Determination of the Coefficient of External Friotion
in the Process of Local Plastic Deformation of Metal 64
Kalachev, M.I. Distribution of Normal Stresses in the Parting
Line of a Die Set 72
Card 2/6

coildetion, of scientific Papers (cont'g) 1133
Severdenko.. V.P. i PasechrQry,, S.A* Effect of Skin Pass Rolling
on the Time Required for Pickling and on the Surfwcme of Steel
8heeta 83
py,_AYj., Kalachey, MI, Cbw es in the RechanicaL Properties
of M-OM-15 Steel as Related to Heating Temperattwe 89
jushkov,, A.V.; Prosvirov,, N.T, Mechanical Properties of Certain
Die Me after Heat Treatment 95
Makarevich., A.I. Flow of Metal in a Die Set- of the Ring Type 105
Makarevich, A.I. Average Pressure of Metal Flow in the Cavity
of a Ring-type Die 3.12
Dovnar, S.A. Model Testing of the Hot Plastic Deformation of a
'Metal Body 124
Card 3/6

CollLaction of Scientific Papers ('Cont 1133
IT. MELUWGRAPHr AND HEAT TEMAMW 133
Gore,~j, K,V.j Tofpenets, R.L. An Investigation of the Process
of Recrystallization. of iron-contawng Alloys of the EI-437
Me 133
GGorW . X.V.; NesteTovich, L.H. An Investigation of the Proper-
~/ ties of Aluminum Alloys vith Constant Amounts of Copper.. Man-
ganese, and Chromium and with Variable Amounts of Magnesium and
Zinc 141
Loykoj Yu. Xi Tofpenets, R.L. Determination of the Type of
Deformation in Copper and Aluminum by X-ray Analysis 152
Gor4 K.V.; Shvedov, L.I. Dispersion Hardening of Iron as
Influenced by Certain Intermetallic Compounds 162
Bodyako, Wei LoyXop Yu*M.; Pavlyukevich, B#L, An Investiga-
tion of Changes in Hardness in the High-frequency Xuduction
Heatits of Deformed Metal __170
Card 4/6

.Collection of Scientific Papers (Cont.) 1133
Bodyako, M.N.; Loyko, Yu. M.; Pavlyukevich,, B.L. Same Data on.the
Speed of RecrystaLlization in Induction Heating 181
III. EUCTRO-PULSE TFOATHM OF MSEALS 189

Mitkevich, S.P4 Wear Resistance of Cast Iron after Mechanized
Electro-1ndse Treatment With Bronze 189
Bakuto, I.A.; Mitskevich, M.Ke; Nekrashevich, I.G. The Electro-
I-erosion Eff-ect on Electrodes of Various Shape 196
14itskovich, M.K. Erosion of Steel-Electrodes in Single Discharges 213
Bakuto, I.,L On the Electro-erosion Series of B.R. and N.L
TAmarenka Fran the. Point of View of the Lents-,Tmde Effect 22D
1v& PUSICS
Sirota, N.N., On the Depandonce of Tharmodynsmic Functions of
SoUd Bodies on Temperature 223
Boyko,, B.B. Obtaining Specimens of Silver Chloride with a Fine-
grained Structure by Means of Cyclical Deformtion, 229
C--d 5/6

.601tection of Scientific POPera (Cont.) U33
Dobrovol'Wdy,, 8.1. Production of Fine-grained Silver chloride
Konovalov, Ye.G.; Sidorenko, Yu.Aj Chachin, VoN. Vibratory
Grinding, Of Hard Alloye
Romwihkinj. Yu. P., Aspirant, Leningrad ftsico-Technical institute,
AcadeW of - Sciences, USM. . - Letter to the Editors on S.A. Dovnara
Article, OCalculation of the Rate of Diffusion in a Body U;4e3f.
going Plastic Deformation" [appearing in val. 1, 1954, of the
present series)
Dovnar, SeA, Diffusion In Alpha Iron During Plastic Deformation
(Reply to Yu. P. Romashkin's letter to the editors)
AVAMMU: Library of Congress
GO/lob
Card 616 2-19-59
241
248
256
258

SZVZRDMO, T.Pg akademl1c, red.; KALACEW, Hol., red.; YUSHKOT. A.T.,
red,; TOIK, A.A.., red.; GURTIGH, G.To.p to
(Papers of t he Conference on, the Improvement of the Technology
Of -the Worldng~~f Metals under Prosawel Watari.44 KOlftrentsli
po usovershenstvovanflu takhaologil 6br.ab,otki as .tallov davlenism.
Minsk, lsd-vo Belgasuniv. im. V.I.Lelninal 195.8. 111 P.-
(MIRA 12:6)
1. Konforentsiya po ucovershenstvovanlyn tokhnolocil-obrabotki
Metiallov davlonlyam.
(Natalwork-Congresaes)

SOV/1 3 7- 59 - 1- 1719
Translation from: Referativnyy zhurnal. Metallurgiya, 1959, Nr 1. p 227 (USSR)
AUTHOR: Yushkov, A. V.
TITLE: Some Trends in the Development of Hot Forming
I
(Nekotoryye napravleniya v razvitit goryachey shtampovki)
PERIODICAL: V sb. : Materialy Konferent.9ii po usoversh. tekhnol . obrabotki
metallov davleniyem. Minsk, Belorussk. un-t, 1958, pp 9-16
ABSTRACT: The author examines improvements rel ating to the preheating of
forgings and stamping blanks on-hammers and presses, also
measures taken to improve the durability of forging dies, the
modernization. of the forging machinery, and the mechanization and
automatization of the various hot-forming processes.
Ye. L.
Card 1/1

SOV/137-59-1-1642~-,-
Translation from-.- '.Ref .6 rat;~~y-y zhurnal 1,allurglya, 1959iI.NrJo p 217 (USSI,-.1
T 46 i~ -, I
Au i4ok,_' us ko~,;A,.
N."
Rc 1-1-lation of
TITLE; Eff6et; of tht-,r, Rrain Rate On ~.#i8taiiee~ to Ddbr
-steel. (K voprosu oVliyanii skorosti deformirovaniyIa na soprotivle-
niye deformatsii)
PERIODICAL: V sb.: 'Materialy Konferentsii- po usoversh. tekhnol. obrabotki
metallov davleniyem. Minsk, Belorussk. un-t, 1958, pp 79-87
ABSTRACT- Experimental investigations demonstrate that during upsetting
operations carried out an specimens of steel 30 the resistance to
deformation (RD) varies as a function of the ratio d/h. In the case
of specimens in which d/h < I., at strain rates ranging from 2 to 8 m/
sec, the RD remains constant. Empirical formulae for the deter-
mination of stresses and evaluation of the RD during open-die
forging in a drop harrimer are proposed.
A. M.
Card 1/1

SOV/137-59-1-1711
Trandation from, Referativnyy zhurnal. Metallurgiya, 1959, Nr 1, p Z26 (L~SSR)
AUTHOR: Yushkov, A. V.
TITLE: Some Lubricating Coatings Employed in Forging Production
(Nekotoryye smazki, primenyayemyye v kuznechnom proizvodstve)
PERIODICAL: V sb. - Matelialy Konferentsii po usoversh. tekhnol. obrabotki
metallov davleniyem Minsk, Belorussk. un-t, 1958, pp 107- 112
ABSTRACT: Certain types of lubricating coatings. (L) employed in hot stamping of
metal are lirted, general requirements that must be met by such
L's are described, and conditions and -fields of their application are
outlined. A roport on novel types of 1,10, glafin, C01101(411 m05-"
awl rion-cornbuntible ethylehe polvinera (fluorocarbo.11 plasties) is
presented. It is pointed out that ibe problem of production and
utilization of high- performance L's, which are essential to increased
operating efficiency and durability of dies, is not given sufficient
attention. This is particularly true of L's employed in stamping of
steel forginigs, a technology in which the durability of dies is still
not- sufficiently high.
Card 1/1 1. K.

SOV/137
Translation from: Referativny-yzhuirnal. Metallurgiya, 1959, Nr 1, 170 (USSR)
AUTHORS: Yushkov, A. V., Kalachev, M. I.
TITLE- Changes in Mechanical Pro-perti.es of Steel ShKh- 15 as a Function of
the Temperature (Izmeneniye mekhanicheskikh svoystv stali ShKh-15
v zavisimosti ot temperatury nagreva)
PERIODICAL: Sb- nauchn. tr~ fiz.-tekhn. in-L AN BSSR, 1958, Nr 4, pp 89-94
ADSTRAC,n Static. mechanical properf-i(,8 lob t ~, , and 11) ) of SbKh- 15 Oc-ol
were determined, and its cripplIng strength under dynamic loading
( a-E) ) at temperatures ranging from 20 to 12000C was established.
The magnitude of the 9a was determined by means of upsetting the
specimens (30 rnm high and 20 mm in diameter) under a drop hammer,
the speed of the ram amounting to 6.25 m/sec, in accordance with the
formula (ra = A/ -. V, where A is the work done during the plastic
deformation; i; the degree of deformation (a value of 10% was as-
sumed), and V the volume of the specimen. It was established that at
temperatures of 4000, 6250~ 9500, and 12000, Tb amounted to 66
kg/mm2, 28 kg/mm2, 10 kg/mm2, and 3 k~hnm2 respectively,while
Card 1/1 Ti) amounted to 54, 54, 25, and 16 kg/mm , resil:lecti.vely. T. F.

S/123/59/000/09/17/036
A0021AOOI
Translation from: Referativnyy zhurnal, Mashinostroyenlye, 1959, No. 9, p, 104,
33628
AUTHORS: Yushkov, A. V.-~j.Prosvlrov, N. T.
Tr=t The Mechanical Properties of Some Die Steels After Heat Treatment
PERIODICAL: Sb. nauchn.-tr. Piz.-tokhn. ln-t.AN WSR, 1958, No. 4, pp. 95-104
TEXT: .1fhe authors Investigated "5XHT" OKW), "5xHB" WhNV), MY
(7W) die steels after quench hardening from 850 0C in oil and tempering at
350-700 0C (at 500intervals); "Y10" (U1O) steel was also investigated. The
mechanical properties in tensile and impact tests were determined at room and
at tempering temperatures. The test for hot cracks (razgarnyye treshchiny) was
perfdrmed by hammering (700 blows) a steel strip made of the steel under
investigation, Imitating a die. The highest heat resistance was found with
5KhNT steel. The greatest proneness to hot crack formation under themomecl,,,an-
Ical. effects was observed with UIO steel. The highest number of hot cracks in
the steels underinvestigation, were observed after tempering at 300 0C.
Card 1/2

SOW& -59-10-3649P,
Translation from: Referativnyy zhurnal, Khimiya, 1959, Nr ~10, p 449 (USSR)
AUTHOR: Yushkov, A.V.,
TITLEg Some Lubricants Psed in the Forging Industry
PERIODICAL; V sb.-. Materialy Konferentsii po usoversh. tekhnol. obrabotki metallov
pod davleniyem. Minsk, Belorus-fik, un-t, 1958, PP 1.07-1.12
ABSTRACT.,- The compositions Of some dry, thick and liquid lubricants are cited and
the application of new types of thermally and chemically stable lubricantp,
(powder-like glass, glass fabric, borax, M032, fluoroplastice) in 't~he hota
punching and forging treatment of' metals In the USSR and abroad are ccn-
~aldovud, ThuWe are 5 rijferenceG,
0, Margolina
Card 1/1

3/137/60/000/010/017/040
AOO6/AOOl
Translation from: Referativnyy zhurnal, Metallurgiya, 1960, No. 10, p. 126,
23455
AUTHORS: Severdenke, V.P.A Prosvirov, N.T., Yushkov, A.V.
TIMEt The Effect of the Flare Groovo Shape on the Wont- RoaIO4.1-ance of
Open Diei3
PEMIODICAL: 3b. nauchn. Fiz-tekhn. in-t, AN BSSR, 1959, No. 5, PP. 70 - 76
TEXT. An analysis is made of themomechanical factors a5suring the dura-
bility of dies. It is experimentally shown that'in the existing shapes of the
flare groove the bridge is subjected to high stresses and heating up to high tem-
peratures. To raiese the wear resistance of open swaging dies, a new V-shaped
flare groove is recommended. The industrial use of dies with 3uch a groove showed
that their durability had increased by a factor of 1.5 - 2.
M.Tg-z
Translator's note: This is the full translation of the original Russian abstract.
Card IP

8/123/61/000/003/011/023
AOO4/A1O4
AUTHOR: Yushkov, A. V.
TITLE: On the impact efficiency during the upsetting of steel blanks with
different diameter-to-height ratios on vertical ram impact machines
PERIODICAL: Referativnyy zhurnal, Mashinostroyeniye " no. 3, 1961, 4, abstract
3V21 ~Sb. nauchn. tr. fiz.-teklm. in-t AN BSSR",no. 5, 1959, 9D-93)
TEXT; The author describes the results of investigating the Impact effi-
ciency during the upsetting of steel specimens 30 mm in diameter (d) and 4-34 nan
high (h) at different temperatures and impact energy on vertical ram impact
machines. The Impact efficiency is determined by the upsetting curve plotted by
the kinematic method. The impact efficiency depends on the specimen dimension,
and the greater d the smaller is the impact efficiency. During the upsetting
of blanks with E d < I at different deformation temperatures and Impact energy,
the efficiency approximates 1. There are 4 figures, I table and 2 references.
S. Kolesnikov
[Abstractor's note: Complete translation]
Card 1/1

VORONCIIIJUJIII,, V.G.;-y3II!Rv I.S
Changing the design of the clag tank. Sbor. rats. predl,
vvedr., v proizy. no.2:58-59 161. OUU 14:7)
1, Lipetakiy metallurgicheskiy zavad 4Svobcdnyy Sokol",
(Foundries-Equipment and supplies)

11 Nag
HUI
qjqj.
4A
:4 1; t g
lp
;IJ
H Flip
- I I ~ I
ffl.] i
!9r jiFf, , - * * "
-'- t. *, I'vgT.
27 I'l T A 1, !.-.11 Di
a r

YUSHOTs-HoP4,
Boundary conditions of automtic control system for turbocosTressors
with long pipe conduits. Inzh.-fiz.zhur. no-7:84-90 J-1 158.
(MIRA 11:8)
I.Gcoudarstvenny7 univeraltet# Leningrad.
(Automatic control) (00'mpresaore

7USHKOV, V.P.; YUSHKOV M P
Vinemtlca of an aboolutelY,,goUd body) Kinematibi. absoUutao
tverlago tola. lAnIngraA, lAningr, tokhnologichaskii in-t
kholodillnoi promyshl,j, 1960, 49 2 (14IRA 14-.12)
(Kizl_4%mati;s)

9300
D409/D301
UM-10R: Yushkov, M.P.
ArL approximate method of determining the principal
critical speed of loaded whirling.shafts
PERIODICAL: Leningrad. Universitet. Vestnik. Seriya matematiki,
mekhaniki i astronomii, v. 13, no. 3, 1962, Y9-102
The mothod cons4nts in replacing a shaft with 2
by a shaft having only one disk, ao that the ctitical opeed
of the equivalent system is equal to that of the original system.
The characteristic equation for the critical speeU of a shaft i,.Tith
2 disks is derived. By assuming that,the disk between the bearings
is absent, one obtains from the characteristic equation
C3(4 + 3c)pS2 - 12(l ~P 30~LS + 12c2(1 + c)a 36.. 0 (5)
where a- = f3/f U3 denoting the distance between the remaining-
disk and one of the bearings, and the distance between the
Card 1/3

S/043/62/013/003/001/001.
An approximate method D409/D301
bearings), /tL . p2/t2 (where 9 denotes the radius'of gyration),
C3v (V being related to the angular velocity of the shaft and
the bending rigidity). An equivalent disk is considered, which is
__h__ -_ the shaf t - -at -a - dis tance -f rom -the -right- -bearing.-
o
ver ung on
The mass of this disk in equal to the sum of the masses of the' ori-_
ginal two disks. The problem consists in determining, frmi Lq. (5),
the fitting-on. point This can be done by solving the
= C,,B . t
characteristic equation and by substituting the obtained solution
in the transformed Eq. (5). Such a method.'is however cumbersome.
in practice, it is more convenient to use the 14following grapho-anal-
ytic method. The characteristic equation is rewritten; a family of
curves,, depending on C, is constructed in the coordinate system
(,u, 6 ). The value of .6, corresponding to a given value of c, is
directly detennined frotm these curves. A second family of curves
is constructed for the determination of ce. The above method of
replacing a system of 2 disks bya single one, yields accurate
-results... I The. method can be extended to the case of n concentrated
rr,,asses located between the two-bearings,- and-a single disk.- The
results thereby obtained are no longer exact, but approximate.
2/3

S/043/62/OL3/003/OOL/001
An approximate method ... D409/D301
IN.To ex*mples are given, illustrating the above method. These exam-
Ples, show that the approximate methods of Dunkerley, Rayleigh,
Stodola, etc., lead to considerable underestimates in -the values of
the critical speed (these methods do not take into account the gyro-
scqpic effect). The author proposes a modif-ication to Dunkerley's
formula: so as to make allowance for this effect. On the other hand,
the above method of the equivalent disk yields slightly overrdted
values. By repeated experiment it was found that in practice the
approximate formula for the critical speed:
k -A6 0.2kb* + 0.8ke (18)
factory ~(k den tingthe value according to Dunkerley's
is satis D no
formula, and ke the value according to the formula of the equivalent-
disk method).
SUBMITTED: February 15, 1961
Card 3/3

YUSHKOV,
Appraximmate xzt.-Xd AfOr daterm-Ining the basic critleal angUar
volouity of loaded weighable ahafts. Veat. LGU 17 no#13:W-
102 162. (MIRA 15s7)
(Rotating bodies)

YUSHKOVI M.P.
A transcendental equation ancountered'In problems of mathematical
physics* Irzho-fizo zhure 5 no.7:94-96 i1 162. OUPA 15:7)
-1e Goaudarstvennyy wdwwaitet, Im6nI-AQ-A*2idanovap laningrad.
(Differentiml equations)

... .............
Goncerning a certain method for determining. the main critical
angu4l-er velvcity of the rotors of turbomachinese Izv,vy9*ucheb*
2MLV;onerge 6 nool.064-69 ja 963, (MM 16:2)
1. Leningradskiy gosudarstvemyy universitat Imeni A.A. Shdagova.
PredftAvlenp Wedroy teoreticheakoy mekhanikio
(Turbomachines)

0 0 0 a 0 a # 0 00a 0 0 004 Get* 06 e-jW 7 *-4V
0 0 0 0 0 0 a a 0 0 0 0 0 0 0'10 a0 000 0 6 0 0 00 0
4 6 1 0 1 1-' 11 U 1; - ~l v n I
P K ;-T if
H[ i-,
44 .00
-480
Gowumam vacsom Jet we da"Valsall" ad twfr
Mw*. Nt A. Vathk4v, A:M*pc&jd#&wawja pr.. -400
04 NO. cle". 12.,,
W.- -49
A win. cautg. to C. SuU~r "Wk &W 3 c, 02% NQS jvt 1. N
0 "Isfid" 4 wwp"f*4. ra" vat'"I al JIM
p-ce In dyftw& is pgcv$mdjp d"d, hy Itm ugWacioa
0:
2 Timuty-41" cc. at the w(ts. (0.4 g. ttvh. dv.I
auff P" 1.) is akw JONI .. ul wi4tcr arld I cv. Ifee
fMI ftl(CC 204M Iflid, MCI "U. il VIAl"ll. i(I tIW vOkmitut-
;cf. COMPWIMM (0111 AIW IV RIA-1V 4944441 & -4411. 1)#
00 "0 dy" 4 the twitsgsscuffiq wokw. W. C., 41.11 a. Artil
00 Puse Blue Fl? + 0.4 q. And tlrsnva M + 0.7 C. Andum 44 0
L)ccv Orom 2B (Rurdart mmicartatitte) 1- 3 C.ft.%U tw.
1. to the moullile "Fws of dve ImIlt'l it k
too
chat Ift Out(Im. to the Nes"i Al-I 11.1 IV. 1p; ..In 0
whitv. lar mUnt to itw ilive *ihs, the jm~mv I,# N40
IWO WW xmll%tj~ tk*o MH hilre(cre with the sucAlf-il. IN-ly.
suuwcs tawo the rclulls. N&OH tt%tcgfccrs only whcn 400
I'M in coacm. "Mier th." 10 11 0
7 W. A. h1owe
-A A.:
JiF - VIA*
'00,
if V. !WC 0
4#110
fortaaw a
ko
'Ll 10 4% 19 14 CC m49 K00
10 " CD Is of it it A
0 0 0 a 0:0 0 0 q a 0 0 0 0 0 411 0
e0 a00 06a aa 0 Q0 C40too0 0& v 48 c# a

a a IN, 0 0 6 a 6 0 0 0 0 9 0
I
A
Go
% A 6 1 0 a It %; n It It A
11 Q . L ~ - ~-A.A-A-6 -
. - I I Ir

00

00
,

0 a 0 6 6 to 9 0 0 0 0 OF wifil 0 4 0 off a 0 4 0 0 0 0 0
is u a r i@ j it v 1. a A v A if L, 1, w u IS a .. v a 0
It f ft 4 1114 tI%t I.
tftwitfirs,
Va. 4. 1 "t 5kP_(AAv T->
v'swt uwvtz[Wm lit dirt-i'lls. Ow 1.4-m4tgo I;Atwe-a m It",
atte latirt4tim!). if! Ivi lin
PtClittiltijittly ftffttn~l WAtCf WAII U~j ifttcAd td file lutj
wAter *hk1i $.inz"A a ppi. imi :hc, mlfAIr 4 ttw WtArill.
!!t Ihe 11-punti.4 ilie Jvv~4 wriv Fill"A".1 1'. siml-I
hu 'j. lim to wv' lite rim tm%%t*. 0)
III *As slwwlilivtl~ it) A I'latual *46 1v4
lite 13#Vlnj~ tpf 111C lijOittti'litfUtH lit Owdytitilki-Ath. V,itv-
1111tv lite OXIC11. Of tile 4t'T'vjljS tLjjjja;j t-Imsols-te (NWO.
fl.,jll .4)t) 10 11t,lep WA,, At I(-,I wltl,.jt '41":, Aving
kite swi%. trmjw~ (tog viiaii1ri'l.
W, 14. 114,1111
*0 41
00 9
1111111-IL4 OfaLLOGKIIA, LiTCOATtAf CLASUOKA111:01
L Roc., w"1444
T
U- u it 14 is cc Is cc KO 4
Of 0 00 0 6-0 00 04000 a 0 0 0 0 e 9 We
0 a 0 vio 00 o 0.-0 09 0 4 0 0 0 0 0 0 a 0 e10
111T.4111
lit
0 9 0 0 0 r0 0 0 0 `11;
* do a 41' OF 0 0 0 Sk
no*
zoo
-00
goo
too
31 4 1
0 0 0 0 & 4 0 a!,
9 0 0 do 41 Al & 0 1AM

15- 4-4
8 x r 2 1- R - 9~1 "WL
U-S
71
0410171mrstem Oe agmUgs to a #wM* b%W M. A -
VaxMov. KAkPcA4kft"OAwAYQ 10 29 -14)
Ow);, CLM. zgxo. E941. 1. 1=8 m).
tvil. nieziuring flask SO zol. of 02 M Z*SO~, 10.0 mi. 4
the unknow (suldde batb solm.), and 23 ml. of 0.1 X
Mi* acid. f"q wc(l. 1111 to tho witst wf(h distd. It
0. TttmIO&W-MLW4= - - --
I ht lutme 444", Sumues, It Naccch k a" ed, PiL.4
co#,tfc# at W 30 140qb a W-MI, 41 of ~(4 Ike
The 4w &-:P1Jl4 tif
flufalo with the Aw (it 0 waltr rm
of *i4M (4 9 IoAdet (timIC 6 1A- *(44, 44 NOW.
P , the Ztl- . A "d Mi. 64 14% kip...
4(h in the w(n
041 lil ZN)%. Titrate the euvwof cUrk acid with O.I.V14(111
in the oi pbatolpfitbskia its Wicator. It t1w
both cg=litde or no 1;&tCO,. 0.1 N AcOlf can bc
blowing of Air throctich
used instead Of Citrk WW. lcidtftc: 0 re
the filtrate m then be climigmted. It~h
ro a
The
6 L 4 "TALLU*GK*L UTg1t&TkW2 CLAUWWATP~m
ir
If a I OR-K Ic W cc (C a
0 a 0 0 * 0 0 * 0 0 0 16 wt
Is- aIV& a eme &*so asow
A 4 'S fts 0 a I w Id

YUSMOVI H. A.
Dyes and Dyeing - Cotton
Three-vat method of dyeing cotton in continuous
operation. Tekst. prom., 12, No. 6. 1952.
Monthly Ust of RusAan Accessions, Library of Congress, October 1952. U14CLASSIFIED.

17"
USSR /themical TechnolOgY. Chemical Products 1-19
and Their Application
Dyeing and chemical treatment of textiles
Abs jour: Referat Zhur Khimiya, No 9, 1957, 32200
Author : .. Yushkov Sladkopevtseva G. Ye., Shubina N.A.,
umarina A.
Title : Decreasing the Expenditure of Sodium Sulfide in
Dyeing Cotton.
Orig Pub: Tekstilinaya prom-st', 1956j. No 7, 37-39
Abstract: The formulas for dyeing cottom with sulfur dyes
(D) have been revised in order to decrease the
expenditure of D and Nag.S. The optimal amounts
of NaZS have been determined for dyeing with
Sulfur Black, Brown Zh, Blue Z and their mixtures,
Card 1/3

i Technology. Chemical ProductO 1-19
USSR /themica Application
and The ir
of textiles
Dyeing and chemical treatment
Abs j--Ur: Referat Zhur Khtmiya, No 9, 1957o 32200
0
8 operation apparatus and centrifu-
in continuOu conditions approximating
gal apparatus, under as found that
the full-scale operations. Itw concen-
:aTe of Na S is determined by Its
the do S/li er) in the dye bat' 11. This
tratio is pparently about the same with
ncentrAtion ly
Co ..amoUntG to approximate
and
the different D depend on
4-6 g/ it does not Lnge of
-liter of 100% Na,
---------the -conc_~Intratlonof _ the D, within the re
On-B-Or-industrial-dye- -baths
the Usual con.-entratil with a
(10-20 g/lIter). The al.kali cOlItent,
of 4-5 T~itero must be
concentration of Na a
not less than 2 Ofter NaOR -oo%). For
card 2/3

USSR /themical Technology. Chemical Products 1-19
and Their Application
Dyeing and chemical treatment of textiles
Abs Jour: Referat Zhar - Khimiya, No 9, 1957, 32200
continuous dyeing apparatus it is not expedient
to use NaCl with a content of thlosulfates, in
the dye bath, amounting to 25-30 g/liter. The
new formulas increase exhaustion of the D, de-
crease its losses during rinsing and, conse-
quently, result in large savings (about 30%) of
D and Na2S .
Card 3/3

KOMIU, Vladislav Vladimirovich;.
_N9jDK,-1WwlzV-1"novich- HAUMOT,
Yasili,v Grigorlyevich; TUROMIT, Fetr Borisovich; Prinimal
uchantiya FELIMAN, A.K., inzh. KORED111, D.S.. red.; HIMYLOTA,
L.G., red.izd-va; PARAKIIIIIA, H.L., taklm.red.
[Kinual on the assembly of technological equipment In the enter-
prisea of the pulp and paper industry) Spravochnik po montazhu
tekhnologichoskogo oboradovaniia predpritatii tselliulozno-
buria-zhnoi promyshlennosti. Honkzva, Gotsleabnnizdat, 10,60. 259 P.
WRA 14:4)
1. Treat Soyuzprombu=ontazh (for 1?olldman).
(Papor industry-Equip-ment and supplies)

---- YUSHKOV, R.I., kand.takhn.nauk
From the first patent to the latest discoveries* ftm.
I prom. 35. no-7:28-29 is 16o. (KLU 13-- 8)
(Paper industry)

YUSE WTI, U.I., kandotekbnonauk
From the history of the paper Industry- Bwm-Proz- nO.8:28-29
Ag l6o. (KM 13:8)
(Paper Industry)

jj~~~ ~oviqh; NAUMOV,, Vasiliy Grigorlyevich; TUROVSKIYp
Petr Borlsovich; ZHOPD, S.G.,, red.; YEFISHKINA# AA, red.
izd-va; SHIMVA, B.S.,, tekhn. red. k
(Assembly and Installation of.technological equipment in
enterprises of the woodpul~ a~d paper industryl~bntazh teikh-
r1i
nologicheakogo oborudovaniia predp atil, tselltulozno-
bumazhnoi promyshlonnosti. Y;skvi, Goalesbumizdat, 1962. 319 p.
FLA
(MIRA 16:2)
(Woodpulp inductry-Equipment and supplies)

KOPERIN, Vladislav Vladimirovich- YUMKOV,, Ilikolay Ivanov3.ch;
IIAUNOV, Va-iliy Grigorlyevic ich
P.S., red.
(Handbook or. tlz a~sccmbl,--and inattillation of th~ tgc'h-
nological equipment in enterprises of the woodijulp and
papor 1,Ddmt2-y] Spravochnik Po rontazbu tekbnologicheakogo
Oborudovatillix prodjvli~vtil pro-
.myshlennosti. lzd.2o, peror. i dop. Monkvap Leanala pro-
iqshlemoot' , 1964. 758 p. (MIRA 17:9)

Y M",M IV hlkl~ NAME OV
GOLOVKQ, Ye.M.J, red.
v
[il,,unir of the I'ecbnological equip-armit of wow1pulp and piper
en Lorpri . 7r1mont toklinologic lie nkogo oboruclovaniia tsel-
liulknno-bumazhukh predpriiatii. Moskva, Lesnaia pronVsh-
h-m"Ost'l 1965. 120 p. (MIRA 18:9)

XGUMOVO LA.9 kandidat maditsinskikh nauk; YMHKOV, R.P...Gtarsbyy ordinator
The ab.ility of furuncle staptylococcl to coagulate blood plaams.
Tent.ven. i derm. 30 no.2:46 Kr-Ap 156. (KIRA 9:?)
(STAMMOGOUS) (BLOCO-COAGULATION)

IQUHNOVO A A. iYUGHKOVt M.F, (OhAta)
9.00 . ~-, Z,
Case of yellow chromhidrosis. Test.ven. i derm- 30 no-*4:57 Jl-Ag 156.
(LIVE-R--DISEASSS) (HLRA 9:10)
(RAIRSPMATION)

TINDFITIT4 14J.; TUSHKOV, N-So
Improving the AB-00 drill for boring frozen ground. Hats. I lzobr.
predl. v stroi. no-7:35-30' !58. (KM U: 12)
(Boring machinery) (Yrozen ground)

ll=OV# P#D#
Dislafeation In fungaue djecasom. Vest.van.1 darn, ao,3,-32'r
(R= 6:12)
1. Ix Cholyabinakogo gorodskogo ven4tepansere.
(Nedical mycolog7)

2F
YUSHKOV,P.D.
[Voladia. Uralov has got into trouble] Toladis, Uralow popal v bedu.
Moskva, Hadgic, 1955. 22 p. (RLRA 8:U)
(CHILD=-DISNA.SM)

MAKHONINA, G,.I.;,,YUSHKOV, P.I.; VOLKOVA, M.Ya.; TIMOFEYEV-RESOVSKIY, N.V.
-Distribution of Sr9O and HuI06 in the basic or&ans of pipe. Dokl,
AN SSSA 151 no.6Pll,5(*-11*57 Ag 163. (MIRA 16110)
1. Institut biologii UraP~kopgo filiala AN SSSR. Predstavleno
akademikom V.N.Sukachevym.

YUSI:fy,01V P. 1.
lKstribution of t
he prc;ducts of photosynthesfs ir, pLnes.
Trudy Inst. biol. UFAIT SSSR no. 43:17-23 165
----...(MIRA -1g.-J)--
- ------- ------
Carbon nutrition of the growing branches of young pines.
3bid..-25-32.
Growth characteristics of pine and birch in water-logged
fordsts of the Lozlva-Pelym interfluve. Ibid..*53-58
1. Institut biologii Urallskogo filiala All SSSR.

YUSHKOY,J.._~,_
Methods for constructing duration graphs for calculating electric
tMation loads. Trudy THIMIT 3506-101 162. (MIRA 160)
(Electric railroads--Current supply)

LU811KOV Pe K, dotaunt; MYL'14IKOVS 14. L., iraho
Analy-tical methods for constructing a load duration chart of a
traction subgtation. Trudy QUIT 37:1-28-137 162. OMIRA 17:

YUSIIFI()Vj PIV.
r:j%-,;
chart Of an 61'ectric, .-a-
Load durati.Dn
41:37-4/5 163.
selecting the -liumber uf pomts of the para of
4ires on dzyuI--e-trFLc',;:
(mIlWi 18:7)

%Mm
BESKOV, B.A.; GERONIFIUS, B.Ye DAVIDOV, N.N.; KRMIYANOV, M.Ye.;
1, G.G.; ~~,m, r,.A.; pjjzjm~a
MARKVARIr -uchastiye TWAMT,
A-,I- - VAYNBLAT B.G. *'---inzh.,, -retsenzent; KRUGLYAKOV, F.Ye.
inzh., retsenzent; KUCM4A, K.G.,,kand. tekhn.nwzk$
ratrionzont; IMAZOV, D.V.j kand. takhn. naukI retsenzent;
dmxlyt Zm.~ ItIMI') in?.h.,
retsenzent; rcauenteal PEMNUM-Y,
L.~.,_tekhn. red.
[Design of electric railroad power supply systems] Praektiro-
vanie sistem energosnabzheniia elektricheskikh zhelezrqkh do-
rog. (By] B.A.Beskov i dr. Moskve-, Transzheldorizdat,, 1963.
470 P. (MIRA 17:2)

za&21"~W, Tho W-~Ictcai har-m-zai": ayl.-ja&L;
failaton-s-wbon thf, )y

e L3
mate -ieltmm :ti

";j,
A

rile

13

ze

.17
x7r- i-t Z-TrT-2 '22 9, 5 1
In 3'1 ear!~~'f f ii-:e Sbcmik 6. 197-210
Pc-v 03'. jzjfjor ob~a;ncl /I.
A,, wd R. for :, iunkno.i
T! (.0s foilvid W.. the lxnll~d
of the
Kt flea merwjcd So As '0
V V .!! i t~;,:afinn if (I'1 arld b- aR a I-I'llefir
com, 1,11;;!;
an
for AIT 'fiff, ~nt -A5~4.
~i k
(if the dents Ob-
.4 tit n2lo-lic cam lymfj. A k;vJ.

TUSHKOV, P.P., kand.fiz.-mat.nauk, dots.
Studying the question of the applicability of Siopson's
formula to problems in practical harmonic analysis. Trudy Mop
6:51-56 154. (MIRA
(Harmonic analysis)

if Mhid corl-11-m
Ivl -I,/
t
y f (.